Ionic Liquid-Assisted Fast Synthesis of Carbon Dots with Strong Fluorescence and Their Tunable Multicolor Emission

The Synthesis of Functionalized Carbonized Polymer Dots via Reversible Assembly of Oligomers for Anti-Counterfeiting, Catalysis, and Gas storage

Carbonized polymer dots (CPDs) have shown exceptional potential across a wide range of applications. However, their practical utilization is significantly greatly impeded by the lack of precise control over their structures and functionalities. Consequently, the development of controlled synthesis strategies for CPDs with well-defined structures and tailored functionalities remains a critical challenge in the field. Here, the controlled synthesis of functional CPDs with reversible assembly properties via airflow-assisted melt polymerization, followed by a one-step post-synthetic doping strategy, is reported. This synthetic approach achieves high product yield, uniform and tunable structures, as well as customized functionalities including solid-state emission, enhanced catalytic performance (3.5-45 times higher than conventional methods), and selective gas storage in the resulting CPDs. The ability to tailor the properties of CPDs through controlled synthesis opens up new opportunities for their practical application in photocatalysis and gas storage.

Waste Polyethylene-Derived Carbon Dots: Administration of Metal-Free Oxidizing Agents for Tunable Properties and Photocatalytic Hyperactivity

The possibility of converting waste plastics into carbon dots (CDs) with 100% efficiencies using KMnO4 has emerged as a significant discovery in mitigating plastic pollution and upcycling. However, the lack of tunability of their properties, viz. aerial O2 harvesting, light-induced autophagy, and photoactivity using air as a free oxidant, has remained a bottleneck. Besides, the toxicity of KMnO4 makes the process less sustainable. Attempting to bridge these gaps, herein, we demonstrate the preparation of CDs using polyethylene with enormous controllability of their properties by utilizing less-toxic and metal-residue-free oxidizers, e.g., H2O2, HNO3, HClO4, and NaClO. We obtain structurally diverse CDs with controllable luminescent quantum yields (∼0.5-8%), excitonic lifetimes (1.3-2.3 ns), and binding energies (147-290 meV). These CDs exhibit a hugely extended range of molecular O2 harvesting (∼405-650 μM) with different amounts of strongly and weakly surface-bound O2 molecules within an estimated ratio of ∼0.77-2.51. Autophagy varied from 14 days to a nearly "no-autophagy" show. We efficiently utilized their oxygen harvesting and photocatalytic abilities to synthesize imine compounds from the corresponding amines in the open air (rate constant of ∼0.055 min-1), surpassing the literature efficiencies achieved using an O2 flow and noble metals. Notably, due to oxygen harvesting by CDs, no additional rate enhancement was observed after O2 purging, establishing the role of CDs in making free air an excellent oxidizing agent.

Carbon Dots: A Review with Focus on Sustainability

Carbon dots (CDs) are an emerging class of nanomaterials with attractive optical properties, which promise to enable a variety of applications. An important and timely question is whether CDs can become a functional and sustainable alternative to incumbent optical nanomaterials, notably inorganic quantum dots. Herein, the current CD literature is comprehensively reviewed as regards to their synthesis and function, with a focus on sustainability aspects. The study quantifies why it is attractive that CDs can be synthesized with biomass as the sole starting material and be free from toxic and precious metals and critical raw materials. It further describes and analyzes employed pretreatment, chemical-conversion, purification, and processing procedures, and highlights current issues with the usage of solvents, the energy and material efficiency, and the safety and waste management. It is specially shown that many reported synthesis and processing methods are concerningly wasteful with the utilization of non-sustainable solvents and energy. It is finally recommended that future studies should explicitly consider and discuss the environmental influence of the selected starting material, solvents, and generated byproducts, and that quantitative information on the required amounts of solvents, consumables, and energy should be provided to enable an evaluation of the presented methods in an upscaled sustainability context.

Recent advances in fluorescence and afterglow of CDs in matrices

Carbon dots (CDs) are novel nanomaterials with dimensions less than 10 nm that have attracted much attention due to their outstanding optical properties. However, the development of solid-state fluorescence and afterglow methods has been relatively slow, although the properties of these materials under liquid conditions have been extensively studied. In recent years, embedding CDs in a matrix has been shown to prevent aggregation quenching and inhibit nonradiative transitions, thus realizing solid-state fluorescence and afterglow, which has greatly broadened the research and application areas of CDs. In terms of hydrogen bonding, ionic bonding, covalent bonding and spatial confinement, the interactions between CDs and matrices can effectively realize and improve the solid-state fluorescence and afterglow effects of CDs. Recent applications of CDs in matrices in optoelectronics, information security, sensing, biotherapeutics and imaging are also summarized. Finally, we summarize the challenges and developments of CDs in matrices.

One-step solvothermal synthesis of full-color fluorescent carbon dots for information encryption and anti-counterfeiting applications

Multicolor fluorescent carbon dots (CDs) have received extensive attention due to their excellent fluorescence tunable performance. In this study, multicolor CDs with color tunable and high fluorescence quantum yields (QYs) were successfully prepared under the same conditions by a one-step solvothermal method using 2-aminoterephthalic acid (ATA) and Nile Blue A (NBA) as reaction reagents, achieving a wide color field coverage. Detailed studies on the relevant mechanisms have been carried out for blue, green and red CDs, indicating that the regulating mechanism of multicolor luminescence is determined by the size of the sp2 conjugated domains, which is due to the increase of particle size that causes an increase in the size of the sp2 conjugated domains, resulting in the narrowing of the band gap and the red-shift of the emission wavelength. It was found that the CDs have the advantages of simple preparation, high photostability and high quantum yield. They were used as fluorescent ink and mixed with polyvinyl alcohol (PVA) to form CD/PVA composites, which were successfully applied in the field of information encryption and anti-counterfeiting. This work provides a new strategy for the synthesis of panchromatic tunable fluorescent CDs and their application in the field of information encryption and anti-counterfeiting.

Biomass-derived carbon dots as emerging visual platforms for fluorescent sensing

Biomass-derived carbon dots (CDs) are non-toxic and fluorescently stable, making them suitable for extensive application in fluorescence sensing. The use of cheap and renewable materials not only improves the utilization rate of waste resources, but it is also drawing increasing attention to and interest in the production of biomass-derived CDs. Visual fluorescence detection based on CDs is the focus of current research. This method offers high sensitivity and accuracy and can be used for rapid and accurate determination under complex conditions. This paper describes the biomass precursors of CDs, including plants, animal remains and microorganisms. The factors affecting the use of CDs as fluorescent probes are also discussed, and a brief overview of enhancements made to the preparation process of CDs is provided. In addition, the application prospects and challenges related to biomass-derived CDs are demonstrated.

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

A carbon dot-based time-dependent color-changing room temperature phosphorescent material with facile synthesis

Carbon dots have attracted widespread attention due to their excellent optical properties and so on and are therefore used in various fields such as anti-counterfeiting. There are many reports on carbon dot-based room-temperature phosphorescent materials, but there are still fewer reports on carbon dot-based room-temperature phosphorescent materials with time-dependent color-changing properties. In this work, a time-dependent color-changing carbon dot-based room-temperature phosphorescent material with the ability to change from green to blue was successfully prepared by a simple one-pot heating method using hydroxyurea as the only raw material. In this process, hydroxyurea is used as both a carbon and nitrogen source, and in the process of material formation, hydroxyurea also partially forms cyanuric acid as a matrix to make the carbon dots uniformly dispersed in it. By blending the ratio of the dual emission centers of the carbon dots themselves, the final effect of time-dependent color-changing is achieved by taking advantage of the intensity changes and color differences of each emission center. The present work provides new ideas for the preparation of time-dependent color-changing carbon dot-based room-temperature phosphorescent materials.

Fluorescence 'Turn-on' Probe for Chromium Reduction, Adsorption and Detection Based on Cellulosic Nitrogen-Doped Carbon Quantum Dots Hydrogels

This paper proposes a new, highly effective fluorescence test for Cr(VI) detection. This method utilizes a hydrogel composed of hydroxyethyl cellulose (HEC), nitrogen-doped carbon quantum dots (N-CQDs), and poly(co-acrylamido-2-methyl-1-propane sulfonic acid) (AMPS). The N-CQDs were successfully synthesized using a simple microwave method, and then conjugated with HEC and AMPS. The higher adsorption (99.41%) and higher reduction rate in H1 likely stems from both the presence of N-CQDs (absent in HB) and their increased free functional groups (compared to H2/H3, where N-CQDs block them). This facilitates the release (desorption) of Cr(VI) from the hydrogels, making it more available for reduction to the less toxic Cr(III). The fluorescent brightness of the HEC-N-CQDs-g-poly(AMPS) hydrogel increases gradually when Cr(VI) is added in amounts ranging from 15 to 120 mg/L. The fluorescent enhancement of the HEC-N-CQDs-g-poly(AMPS) hydrogel appeared to exhibit a good linear relationship with the 15-120 mg of the Cr(VI) concentration, with a detection limit of 0.0053 mg/L, which is lower than the standard value published by WHO. Our study found that the HEC-N-CQDs-g-poly(AMPS) hydrogel served effectively as a fluorescent probe for Cr(VI) detection in aqueous solutions, demonstrating high sensitivity.

Bell pepper derived nitrogen-doped carbon dots as a pH-modulated fluorescence switching sensor with high sensitivity for visual sensing of 4-nitrophenol

Recently, converting bio-waste into bio-asset and implementing a portable sensing instrument for pollutant monitoring has been highly desirable and challenging. Herein, biomass-derived nitrogen-doped carbon dots (CDs) are prepared hydrothermally and emit blue fluorescence (470 nm) with a high quantum yield of 23.2%. Significantly, CDs can serve as a pH-modulated fluorescence switching nano-sensor to detect 4-NP from 0.054 to 68 μM with low detection limit (LOD, 54 nM) and limit of quantification (LOQ, 181 nM) based on inner filter effect. Moreover, the satisfactory recovery of 101.8-107.5% is gained in practical sample monitoring. Furthermore, a smartphone-integrated optosensing device with CDs-based film is developed for detecting 4-NP with LOD and LOQ of 0.110 μM and 0.350 μM. Concomitantly, the practicability of this device is further validated in several crop samples with satisfactory recovery rates of 101.6-108.6%. Therefore, this work provides a reliable way and a prospective application for on-site 4-NP monitoring in food.

Organosilicon-Based Carbon Dots and Their Versatile Applications

Carbon dots (CDs) are a newly discovered type of fluorescent material that has gained significant attention due to their exceptional optical properties, biocompatibility, and other remarkable characteristics. However, single CDs have some drawbacks such as self-quenching, low quantum yield (QY), and poor stability. To address these issues, researchers have turned to organosilicon, which is known for its green, economical, and abundant properties. Organosilicon is widely used in various fields including optics, electronics, and biology. By utilizing organosilicon as a synthetic precursor, the biocompatibility, QY, and resistance to self-quenching of CDs can be improved. Meanwhile, the combination of organosilicon with CDs enables the functionalization of CDs, which significantly expands their original application scenarios. This paper comprehensively analyzes organosilicon in two main categories: precursors for CD synthesis and matrix materials for compounding with CDs. The role of organosilicon in these categories is thoroughly reviewed. In addition, the paper presents various applications of organosilicon compounded CDs, including detection and sensing, anti-counterfeiting, optoelectronic applications, and biological applications. Finally, the paper briefly discusses current development challenges and future directions in the field.

Carbon quantum dots-containing poly(β-cyclodextrin) for simultaneous removal and detection of metal ions from water

This study investigates the synthesis and characterization of supramolecular composites composed of poly(β-cyclodextrin-co-citric acid) and carbon quantum dots (QDs). These composites serve a dual purpose as adsorbents and photoluminescent probes for divalent metal ions, including Ni(II), Cu(II), Cd(II), and Pb(II), which can have detrimental effects on the environment. Various characterization techniques were employed to confirm the successful synthesis of the composites and the interaction between cyclodextrins and QDs. By using mathematical tools, optimal conditions for metal adsorption were determined, resulting in the composites exhibiting high adsorption capacities, reaching 220 mg/g, and impressive removal efficiencies exceeding 90 % for Ni(II) and Cu(II). The supramolecular composites also exhibit selective adsorption of metal ions with small ionic radio and can be reused with minimal loss of efficiency. In addition to their adsorption capabilities, these composites display luminescence quenching upon the adsorption of metal ions, which can be utilized for sensing applications. Spectroscopic evaluation reveals Stern-Volmer quenching constants for the accessible fraction of QDs in the range of 3777 to 13,359 M-1. The high stability of QDs on the composites allows for long-term storage. In summary, this original supramolecular composite shows promise for simultaneously monitoring and treating water and wastewater, making it a valuable tool in environmental applications.

Visualized adsorption and enhanced photocatalytic removal of Cr6+ by carbon dots-incorporated fluorescent nanocellulose aerogels

In this study, carbon dots (CDs) and titanate nanofibers (TNs) were mixed with TEMPO-oxidized nanocellulose (TOCNC) to prepare fluorescent nanocellulose aerogels (FNAs) by a Schiff base reaction. The resulting FNA can detect the adsorption of Cr6+ through the fluorescence quenching in CDs and promote the removal of Cr6+ through the synergistic effect of CDs in photocatalysis. The optimized FNA has a maximum adsorption capacity of 543.38 mg/g, higher than most reported Cr6+ adsorbents. This excellent performance is due to the porous structure of the aerogel, which gives it a high specific surface area of 20.53 m2/g and provides abundant adsorption sites. Simultaneously, CDs can enhance the amino-induced Cr6+ adsorption, improve the photocatalytic performance of TNs, and expose more adsorption sites through electrostatic adsorption of amino-induced reduction products (Cr3+). This study explores the preparation of visualized nanosorbents with enhanced photocatalytic removal of Cr6+ and provides a new direction for nanoscale photocatalysts.

Control strategies for microplastic pollution in groundwater

Groundwater is the primary source of water that occurs below the earth's surface. However, the advancement in technology and the increasing population, which lead to the discharge of contaminants such as microplastics (MPs), have an adverse impact on the quality of groundwater. MPs are ubiquitous pollutants that are widely found throughout the world. The maximum abundance of MPs is 4 items/L and 15.2 items/L in groundwater at the specific location of China and USA. Various factors can affect the migration of MPs from soil to groundwater. The occurrence of MPs in water causes serious health issues. Therefore, taking appropriate strategies to control MP contamination in groundwater is urgent and important. This review summarizes the current literature on the migration process of MPs from soil to groundwater along with possible methods for the remediation of MP-polluted groundwater. The main objective of the review is to summarize the technical parameters, process, mechanism, and characteristics of various remediation methods and to analyze strategies for controlling MP pollution in groundwater, providing a reference for future research. Possible control strategies for MP pollution in groundwater include two aspects: i) prevention of MPs from entering groundwater; ii) remediation of polluted groundwater with MPs (ectopic remediation and in-situ remediation). Formulating legislative measures, strengthening public awareness and producing more environment-friendly alternatives can be helpful to reduce the production of MPs from the source. Manage plastic waste reasonably is also a good strategy and the most important part of the management is recycling. The shortcomings of the current study and the direction of future research are also highlighted in the review.

Design of a Synthetic Strategy to Achieve Enhanced Fluorescent Carbon Dots with Sulfur and Nitrogen Codoping and Its Multifunctional Applications

Here, a rational strategy to achieve multifunctional N, S codoped carbon dots (N, S-CDs) is reported, aiming to improve the photoluminescence quantum yields (PLQYs) of the CDs. The synthesized N, S-CDs have excellent stability and emission properties independent of excitation wavelength. Through the introduction of S element doping, the fluorescence emission of CDs is red-shifted from 430 to 545 nm, and the corresponding PLQYs can be greatly enhanced from 11.2% to 65.1%. It is found that the doping of S elements causes an increase in the size of CDs and an elevated graphite N content, which may be the key factors to cause the redshift of fluorescence emission. Furthermore, the introduction of S element also serves to suppress the nonradiative transitions, which may be responsible for the elevated PLQYs. Besides, the synthesized N, S-CDs have certain solvent effect and can be applied to detect water content in organic solvents, and have strong sensitivity to alkaline environment. More importantly, the N, S-CDs can be used to achieve an "on-off-on" dual detection mode between Zr4+ and NO2 - . In addition, N, S-CDs combinedwith polyvinylpyrrolidone (PVP) can also be utilized as fluorescent inks for anti-counterfeiting applications.

Effect of conjugation length on fluorescence characteristics of carbon dots

The influence of sp2- and sp3-hybridized carbon coexisting in carbon cores on fluorescence characteristics of carbon dots (CDs) was revealed by density functional theory calculations. Based on the constructed coronene-like structures, the fluorescence emission spectra, transition molecular orbital pairs and several physical quantities describing the distribution of electrons and holes were investigated. The results indicate that due to the interaction between sp2 and sp3 carbon atoms, two main factors including the hyperconjugative effect and the separation of sp2 domain by sp3 carbon atoms can regulate the fluorescence wavelength. By analyzing the transition molecular orbital pairs, it was found that the fluorescence wavelength has a close correlation with the conjugation length, suggesting that the conjugation length can predict the shift of the emission spectra of CDs. The theoretical results provide a comprehensive understanding of fluorescence mechanism and help to synthesize CDs with expected fluorescence wavelength.

In-situ synthesis of ionic liquid-based-carbon quantum dots as fluorescence probe for hemoglobin detection

Carbon quantum dots (CQDs) have emerged as a potential fluorescent probe in bio/analytical chemistry in the present decade. The optical characteristics of CQDs may be tuned by their functional groups, which can also be used to selectively produce stable bonds with target molecules. Along with them, ionic liquids (ILs) are now demonstrating their important relevance in the field of pharmaceuticals for the creation of potent therapeutics. In the article, we have discussed the use of high fluorescent ILs-decorated-CQDs (CQDs-IM@OTf) as a straightforward and quick-acting fluorescence probe for sensitive and precise hemoglobin (Hb) determination with minimum detectability of 6.7 nM. The proposed mechanism behind this involves static mode of quenching which leads to the formation of a ground state complex [CQDs-IM@OTf-Hb complex] between the Hb protein and the drug. Despite the fact that Hb can quench the fluorescence of CQDs due to the inner filter effect (IFE) of the protein, which effects both the excitation and emission spectra of the CQDs, the addition of H₂O₂ improved the sensitivity of Hb detection. The present assay predicated on Hb interaction with H₂O₂, which produces reactive oxygen species such as hydroxyl (OH^.) and superoxide (O₂^.-) radicals under heme degradation and/or iron release from Hb. The subsequent reaction of hydroxyl radicals with CQDs, which acts as a strong oxidising agent, causes a high fluorescence quenching. The designed fluorescence probe was used to measure Hb in the concentration range of 3-90 nM with a precise detection limit of 0.33 nM. The quantification of hemoglobin (Hb) in diluted human blood samples is done using this observation.

Synthesis and post-synthesis strategies for polychromatic carbon dots toward unique and tunable multicolor photoluminescence and associated emission mechanism

Carbon dots (CDs) with unique and tunable multicolor photoluminescence (PL) emission has attracted tremendous attention in the past few years due to their potential multifaceted application, specially in the biomedical and optoelectronic fields. There has been extensive deliberation and efforts to engineer the synthesis or post synthesis approach to obtain multicolor-emissive CDs and tune their optical properties toward longer wavelength. This review mainly focuses on the advancement of strategies for synthesis and post-synthesis techniques of CDs toward tunable multicolor emission. Based on the above discussion to achieve desired goals, several synthesis strategies (selection of proper benzenoid precursor, acid/base treatment of biomass, optimization of reaction conditions, optimization of the reagents, solvent engineering, acid strength regulation, reaction temperature regulation, chemical doping) and various post synthesis strategies (column chromatographic separation or purification, solvatochromism, pH variation, surface functionalization, concentration variation) have been reviewed. Although numerous research articles have been published on the synthesis of multicolor CDs for multifaceted application, there is still a lack of a concise review article focusing on systematic synthesis/post synthesis strategies with PL mechanism elucidation. Thus, we focused on providing a comprehensive overview of the state-of-the-art advances on the strategies for the preparation of polychromatic CDs with tunable emission and elucidating their emission mechanism.

Synthetic strategies, properties and sensing application of multicolor carbon dots: recent advances and future challenges

Recently, carbon dots (CDs) as newly developed carbon-based nanomaterials due to advantages such as excellent photostability and easy surface functionalization have generated wide application prospects in fields such as biological imaging and chemical sensing. The multicolor emission carbon dots (M-CDs) were acquired through the selection of different carbon source precursors, change of synthesis conditions and synthesis environment. Therefore, the aim of this review is to summarize the latest research progress in polychromatic CDs from the perspectives of synthesis strategies, luminescent mechanisms, luminescent properties and applications. This review focuses on how to prepare MCDs by changing raw materials and synthesis conditions such as reaction temperature, synthesis time, synthesis pH, and synthesis solvent. This review also presents the optical properties of MCDs, concentration effects, solvent effects, pH effects, elemental doping, and surface passivation on them, as well as their creative applications in the field of sensing applications. It is anticipated that this review will serve as a guide for the development of multifunctional M-CDs and inspire future research on controllable design and preparation of M-CDs.

An Efficient Green Approach to Constructing Adenine Sulfate-Derived Multicolor Sulfur- and Nitrogen-Codoped Carbon Dots and Their Bioimaging Applications

A cost-effective and environmentally friendly approach is proposed for producing N- and S-codoped multicolor-emission carbon dots (N- and S-codoped MCDs) at a mild reaction temperature (150 °C) and relatively short time (3 h). In this process, adenine sulfate acts as a novel precursor and doping agent, effectively reacting with other reagents such as citric acid, para-aminosalicylic acid, and ortho-phenylenediamine, even during solvent-free pyrolysis. The distinctive structures of reagents lead to the increased amount of graphitic nitrogen and sulfur doping in the N- and S-codoped MCDs. Notably, the obtained N- and S-codoped MCDs exhibit considerable fluorescence intensities, and their emission color can be adjusted from blue to yellow. The observed tunable photoluminescence can be attributed to variations in the surface state and the amount of N and S contents. Furthermore, due to the favorable optical properties, good water solubility and biocompatibility, and low cytotoxicity, these N- and S-codoped MCDs, especially green carbon dots, are successfully applied as fluorescent probes for bioimaging. The affordable and environmentally friendly synthesis method employed to create N- and S-codoped MCDs, combined with their remarkable optical properties, offers a promising avenue for their use in various fields, particularly in biomedical applications.

Computer chip-inspired design of nanocellulose/carbon dots hydrogel as superior intensifier of nano-sized photocatalyst for effective Cr(VI) removal

Hydrogel, a common carrier of photocatalyst that suffers from compromised catalytic efficiency, is still far from practical application. Herein, based on "computer chip-inspired design", a novel nanocellulose/carbon dots hydrogel (NCH) was fabricated as superior intensifier instead of common carrier of sodium titanate nanofibre (STN), where carbon dots (CDs) enhanced amino group-induced adsorption for Cr(VI), promoted photocatalytic properties of STN via transferring the photogenerated electron-hole pairs and improved amino group-induced desorption for reduced product (Cr(III)) via electrostatic repulsion, showing an efficiency of 1 + 1 > 2. Adsorption and photocatalysis experiments demonstrated superior removal performance of the NCH incorporating STN, as shown by theoretical maximum adsorption capacity of 425.74 mg/g and kinetic constant of 0.0374 min^-1 in the photocatalytic process, which was nearly 6.6 and 7.3 times of STN. A series of experiments was conducted to confirm the novel mechanism of CDs-enhanced adsorption-photocatalysis-desorption synergy. This work not only provides new insights into the fabrication of a superior intensifier for nanosized photocatalyst, but also proposes one new mechanism of CDs-enhanced adsorption-photocatalysis-desorption synergy, which is helpful for designing and optimizing nanosized photocatalyst.

Multiple Stimuli-Response Polychromatic Carbon Dots for Advanced Information Encryption and Safety

Optical information encryption and safety have aroused great attention since they are closely correlated to data protection and information safety. The development of multiple stimuli-response optical materials for constructing large-capacity information encryption and safety is very important for practical applications. Carbon dots (CDs) have many gratifying merits, such as polychromatic emission, diverse luminous categories, and stable physicochemical properties, and are considered as one of the most ideal candidates for information protection. Herein, carbon core, functional groups, solvents, and other crucial factors are reviewed for outputting polychromatic emission of multiple luminous categories. In particular, substrate engineering strategies have been emphasized for their critical role in yielding excellent optical features of multiple luminous categories. High-capacity information encryption and safety strategies are reviewed by relying on the rich optical properties of CDs, such as polychromatic emission, multiple luminous categories of fluorescence, afterglow, and upconversion, as well as external-stimuli-assisted optical changes. Some perspectives for preparing excellent CDs and further developing information security strategies are proposed. This review provides a good reference for the manipulation of polychromatic CDs and the development of next-generation information encryption and safety.

An abiotic carbon dots@ ZIF-90 fluorescent probe for rapid and reliable detection of adenosine triphosphate

ATP is a high-energy compound that plays a vital role in biological metabolism. Abnormal changes in ATP concentration are related to various diseases and reflect microbial metabolism in biofilms. In this work, we prepared carbon quantum dots (CDs) with aggregation-induced fluorescence inhibition effect using the bacterial culture medium as raw material with a hydrothermal method. Then, an abiotic fluorescent nanoprobe named CDs@zeolitic imidazolate frameworks-90 (ZIF-90) was facilely synthesized by encapsulating CDs into ZIF-90. Owing to the encapsulation of CDs in the hollow structure of ZIF-90, the blue fluorescence emission of CDs@ZIF-90 decreased significantly. In the presence of ATP, the ZIF-90 framework was destroyed due to the strong coordination between ATP and Zn²⁺. The released CDs exhibited stronger fluorescence intensity, which was closely related to the ATP concentration. The convenient synthesis process and rapid ATP-responsive ability make CDs@ZIF-90 highly promising for clinical and environmental analysis.

A Molecular Engineering Strategy for Achieving Blue Phosphorescent Carbon Dots with Outstanding Efficiency above 50

Highly efficient emission has been a long-lasting pursuit for carbon dots (CDs) owing to their enormous potential in optoelectronic applications. Nevertheless, their room-temperature phosphorescence (RTP) performance still largely lags behind their outstanding fluorescence emission, especially in the blue spectral region. Herein, high-efficiency blue RTP CDs have been designed and constructed via a simple molecular engineering strategy, enabling CDs with an unprecedented phosphorescence quantum efficiency of to 50.17% and a long lifetime of 2.03 s. This treating route facilitates the formation of high-density (n, π*) configurations in the CD π-π conjugate system through the introduction of abundant functional groups, which can evoke a strong spin-orbit coupling and further promote the intersystem crossing from singlet to triplet excited states and radiative recombination from triplet excited states to ground state. With blue phosphorescent CDs as triplet donors, green, red, and white afterglow composites are successfully fabricated via effective phosphorescence Förster resonance energy transfer. Importantly, the color temperature of the white afterglow emission can be widely and facilely tuned from cool white to pure white and warm white. Moreover, advanced information encryption, light illumination, and afterglow/dynamic visual display have been demonstrated when using these multicolor-emitting CD-based afterglow systems.

Achieving High-Efficiency Large-Area Luminescent Solar Concentrators

Luminescent solar concentrators (LSCs) are semitransparent windows that are able to generate electricity from sunlight absorption. LSCs have shown huge promise for realizing building-integrated photovoltaics (BIPV). Unfortunately, to date, the power conversion efficiency (PCE) of LSCs is still very low which dramatically hampers their practical applications. In this Perspective, We summarize and review the latest developments of LSCs by looking at different structures. Among others, we focus more on the next developments in the field of LSCs, i.e., the possibility of high PCE, large area, mass production, and durability needed for future industrial development. We hope to promote the application of uniform testing standards and to draw attention to industrial development, toxicity, and durability. Then, we will provide a critical assessment of the field of LSCs. Finally, the challenge and solution will be discussed.

The Emerging Development of Multicolor Carbon Dots

As a relatively new type of fluorescent carbon-based nanomaterials, multicolor carbon dots (MCDs) have attracted much attention because of their excellent biocompatibility, tunable photoluminescence (PL), high quantum yield, and unique electronic and physicochemical properties. The multicolor emission characteristics of carbon dots (CDs) obviously depend on the carbon source precursor, reaction conditions, and reaction environment, which directly or indirectly determines the multicolor emission characteristics of CDs. Therefore, this review is the first systematic classification and summary of multiple regulation methods of synthetic MCDs and reviews the recent research progress in the synthesis of MCDs from a variety of precursor materials such as aromatic molecules, small organic molecules, and natural biomass, focusing on how different regulation methods produce corresponding MCDs. This review also introduces the innovative applications of MCDs in the fields of biological imaging, light-emitting diodes (LEDs), sensing, and anti-counterfeiting due to their excellent PL properties. It is hoped that by selecting appropriate adjustment methods, this review can inspire and guide the future research on the design of tailored MCDs, and provide corresponding help for the development of multifunctional MCDs.

Dual-emission carbon dots for sensitive fluorescence detection of metal ions and ethanol in water

Carbon dots (CDs) have been widely used in biomedical fields because of their superior optical properties, high sensitivity and high selectivity to specific substances. However, there are few studies on trace detection of the ethanol content in aqueous solution using CDs. Herein, novel red fluorescent CDs with dual emission are synthesized and show good dispersibility in various solvents and excitation independence of photoluminescence (PL). After investigating the structure and properties of the red CDs, a multifunctional fluorescent nanoprobe based on the red CDs with high-sensitivity detection for dual-ion trace detection of Fe³⁺ and Cu²⁺ can be successfully constructed. The limit of detection of Fe³⁺ and Cu²⁺ can be up to 0.024 μM and 0.036 μM, respectively, which is superior to that in previous reports. Meanwhile, in view of the specific solvent effect on their PL, the red CDs are able to be applied for trace detection of the ethanol content in aqueous solution. The methods of colorimetry and fluorescence spectrometry are utilized to perform the threshold test and high-sensitivity quantitative analysis of the ethanol content in aqueous solution. Based on this, a multifunctional fluorescent nanoprobe based on the dual-emission red CDs can be obtained, which provides a promising way for their applications in detection and sensing fields.

Acid-regulated boron-nitrogen codoped multicolor carbonized polymer dots and applications for pH sensing and trace water detection

To obtain multicolor carbonized polymer dots (CPDs), acid-assisted hydrothermal/solvothermal reactions are an effective strategy. However, the long wavelength fluorescence of boron-nitrogen codoped CPDs (BN-CPDs) is rarely reported. In this work, we used concentrated hydrochloric acid to regulate the fluorescence (from green to orange) of BN-CPDs via a solvothermal reaction. Meanwhile, 3-formylphenylboronic acid with a benzene ring structure was employed as the boron source, which helped the formation of the internal conjugated structure of CPDs to obtain long wavelength fluorescent CPDs. The fluorescence properties of BN-CPDs were investigated, which indicated the concentration- and solvent-dependent properties of the BN-CPDs. Based on the experimental results, we assume that the multicolor emission of the BN-CPDs originates from the synergistic effects of the degree of graphitization and surface states. Due to the special fluorescence properties of the BN-CPDs, pH sensing and trace water detection in dichloromethane solution can be effectively achieved. The results of the study reveal the potential of BN-CPDs in sensing applications.

Improvement of the bladder perfusion curative effect through tight junction protein degradation induced by magnetic temperature-sensitive hydrogels

Postoperative intravesical instillation of chemotherapy is a routine procedure for non-muscular invasive bladder cancer (NMIBC). However, traditional bladder perfusion methods have insufficient exposure time, resulting in unsatisfactory therapeutic effects. In the present study, a chitosan (CS)-based in situ forming depot (ISFD) delivery system, including Fe₃O₄ magnetic nanoparticles (Fe₃O₄-MNP), CS, and β-glycerophosphate (GP) as main components, was synthesized. Pirarubicin (THP), as a chemotherapeutic drug, was loaded into the new system. Results showed that our carrier system (Fe₃O₄-THP-CS/GP) was converted into gel and attached to the bladder wall, possessing loose network structures with magnetic targeting and sustained release properties. Moreover, its retention time in bladder was more than 72 h accompanied by a suitable expansion rate and good degradation characteristics. The antitumor activities of Fe₃O₄-THP-CS/GP were more effective both in vitro and in vivo than the free THP solution. In the study of its mechanism, results showed that Fe₃O₄-THP-CS/GP suppressed the expression of occludin (OCLN) and affected tight junctions (TJ) between urothelial cells to promote THP absorption.