Strategy of Enhancing Built-in Field to Promote the Application of C-TiO2 /SnO2 Bilayer Electron Transport Layer in High-Efficiency Perovskite Solar Cells (24.3%)

Controllable Iodoplumbate-Coordination of Hybrid Lead Iodide Perovskites via Additive Engineering for High-Performance Solar Cells

The crystallization and growth of perovskite crystals are two crucial factors influencing the performance of perovskite solar cells (PSCs). Moreover, iodoplumbate complexes such as PbI2, PbI3-, and PbI42- in perovskite precursor solution dictate both the quality of perovskite crystals and the optoelectrical performance of PSCs. Here, we propose an iodoplumbate-coordination strategy that employs pentafluorophenylsulfonyl chloride (PTFC) as an additive to tailor the crystal quality. This strategy directly affects the thermodynamics and kinetics of perovskite crystal formation by regulating hydrogen bonds or coordination bonds with Pb2+ or I- ions. Subsequently, the synergistic effect of the PTFC and FA+ complex was beneficial for intermediate-to-perovskite phase transition, improving the crystalline quality and reducing the defect density in the perovskite film to suppress nonradiative recombination loss. Consequently, the treated PSCs achieved a power conversion efficiency (PCE) of 24.61%, demonstrating enhanced long-term stability under both light and thermal stress. The developed device retained 92.53% of its initial PCE after 1200 h of continuous illumination and 88.6% of its initial PCE after 600 h of 85 °C thermal stability tests, respectively, both conducted in N2 atmospheres.

Impact of Dipole Effect on Perovskite Solar Cells

Interface modification and bulk doping are two major strategies to improve the photovoltaic performance of perovskite solar cells (PSCs). Dipolar molecules are highly favored due to their unique dipolarity. This review discusses the basic concepts and characteristics of dipoles. In addition, the role of dipoles in PSCs and the corresponding conventional characterization methods for dipoles are introduced. Then, we systematically summarize the latest progress in achieving efficient and stable PSCs in dipole materials at several key interfaces. Finally, we look forward to the future application directions of dipole molecules in PSCs, aiming at providing deep insight and inspiration for developing efficient and stable PSCs.

Simultaneous Li-Doping and Formation of SnO2-Based Composites with TiO2: Applications for Perovskite Solar Cells

Tin oxide (SnO2) has been recognized as one of the beneficial components in the electron transport layer (ETL) of lead-halide perovskite solar cells (PSCs) due to its high electron mobility. The SnO2-based thin film serves for electron extraction and transport in the device, induced by light absorption at the perovskite layer. The focus of this paper is on the heat treatment of a nanoaggregate layer of single-nanometer-scale SnO2 particles in combination with another metal-dopant precursor to develop a new process for ETL in PSCs. The combined precursor solution of Li chloride and titanium(IV) isopropoxide (TTIP) was deposited onto the SnO2 layer. We varied the heat treatment conditions of the spin-coated films comprising double layers, i.e., an Li/TTIP precursor layer and SnO2 nanoparticle layer, to understand the effects of nanoparticle interconnection via sintering and the mixing ratio of the Li-dopant on the photovoltaic performance. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) measurements of the sintered nanoparticles suggested that an Li-doped solid solution of SnO2 with a small amount of TiO2 nanoparticles formed via heating. Interestingly, the bandgap of the Li-doped ETL samples was estimated to be 3.45 eV, indicating a narrower bandgap as compared to that of pure SnO2. This observation also supported the formation of an SnO2/TiO2 solid solution in the ETL. The utilization of such a nanoparticulate SnO2 film in combination with an Li/TTIP precursor could offer a new approach as an alternative to conventional SnO2 electron transport layers for optimizing the performance of lead-halide perovskite solar cells.

High-Quality TiO2 Electron Transport Film Prepared via Vacuum Ultraviolet Illumination for MAPbI3 Perovskite Solar Cells

The electron transport layer (ETL) plays an important role in determining the conversion efficiency and stability of perovskite solar cells (PSCs). Here, TiO2 thin film was prepared by irradiating diisopropoxy diacetylacetone titanium precursor thin film with 172 nm vacuum ultraviolet (VUV) at a low temperature. The prepared TiO2 thin film has higher electron mobility and conductivity. As it is used as an ETL for MAPbI3 PSCs, its band structure is better matched with the perovskite, and at the same time, due to the good interface contact, more uniform perovskite crystals are formed. Most importantly, a large number of hydroxyl radicals were formed during VUV irradiation of the precursor film, which made up for the oxygen defect present on the surface of the TiO2 thin film, and were adsorbed to the film surface. These hydroxyl groups form hydrogen bonds with methylammonium (MA) components on the MAPbI3 buried surface, thus promoting the transfer of photogenerated electrons at the MAPbI3/ETL interface. The power conversion efficiency of PSCs fabricated in air with the ETL prepared by VUV irradiation is 20.46%, which is higher than that of the contrast solar cell based on the sintered ETL (17.96%).

Enhancement and Broadening of the Internal Electric Field of Hole-Transport-Layer-Free Perovskite Solar Cells by Quantum Dot Interface Modification

Hole-transport-layer-free perovskite solar cells have attracted strong interest due to their simple structure and low cost, but charge recombination is serious. Built-in electric field engineering is an intrinsic driver to facilitate charge separation transport and improve the efficiency of photovoltaic devices. However, the enhancement of the built-in electric field strength is often accompanied by the narrowing of the space charge region, which becomes a key constraint to the performance improvement of the device. Here, we propose an effective regulation method, the component engineering of quantum dots, to enhance the strength of the built-in electric field and broaden the range of space charge. By using all inorganic CsPbBrxI3-x (x = 0, 1, 2, 3) quantum dot interface modification to passivate the defects of MAPbI3 perovskite films, the regulation law of quantum dot components on the work function of perovskite films was revealed, and the mechanism of their influence on the internal electric field intensity and space charge region distribution was further clarified, thereby fundamentally solving the serious problem of charge recombination. As directly observed by electron-beam-induced current (EBIC), the introduction of CsPbBr2I quantum dots can effectively enhance the interfacial electric field intensity, widening the space charge region from 160 to 430 nm. Moreover, the efficiency of the hole-free transport layer perovskite solar cells modified by CsPbBr2I quantum dots was also significantly enhanced by 1.5 times. This is an important guideline for electric field modulation and efficiency improvement within photovoltaic devices with other simplified structures.

Highly Crystalized Cl-Doped SnO2 Nanocrystals for Stable Aqueous Dispersion Toward High-Performance Perovskite Photovoltaics

Tin dioxide (SnO2 ) with high conductivity and low photocatalytic activity has been reported as one of the best candidates for highly efficient electron transport layer (ETL) in perovskite solar cell (PSC). The state-of-the-art SnO2 layer is achieved by chemical bath deposition with tunable properties, while the commercial SnO2 nanocrystals (NCs) with low tunability still face the necessity of further improvement. Here, a kind of highly crystallized Cl-doped SnO2 NCs is reported that can form very stable aqueous dispersion with shelf life up to one year without any stabilizer, which can facilitate the fabrication of PSCs with satisfactory performance. Compared to the commercial SnO2 NCs regardless of the extrinsic Cl-doping conditions, the intrinsic Cl-doped SnO2 NCs effectively suppress the energy barrier and reduces the trap state density at the buried interface between perovskite and ETL. Consequently, stable PSCs based on such Cl-doped SnO2 NCs achieve a champion efficiency up to ≈25% for small cell (0.085 cm2 ) and ≈20% for mini-module (12.125 cm2 ), indicating its potential as a promising candidate for ETL in high-performance perovskite photovoltaics.

Benzothieno[3,2-b]thiophene-Based Noncovalent Conformational Lock Achieves Perovskite Solar Cells with Efficiency over 24

Organic semiconductors with noncovalently conformational locks (OSNCs) are promising building blocks for hole-transporting materials (HTMs). However, lack of satisfied neighboring building blocks negatively impacts the optoelectronic properties of OSNCs-based HTMs and imperils the stability of perovskite solar cells (PSCs). To address this limitation, we introduce the benzothieno[3,2-b]thiophene (BTT) to construct a new OSNC, and the resulting HTM ZS13 shows improved intermolecular charge extraction/transport properties, proper energy level, efficient surface passivation effect. Consequently, the champion devices based on doped ZS13 yield an efficiency of 24.39 % and 20.95 % for aperture areas of 0.1 and 1.01 cm2 , respectively. Furthermore, ZS13 shows good thermal stability and the capability of inhibiting I- ion migration, thus, leading to enhanced device stability. The success in neighboring-group engineering can triggered a strong interest in developing thienoacene-based OSNCs toward efficient and stable PSCs.

Construction of a transition-metal sulfide heterojunction photocatalyst driven by a built-in electric field for efficient hydrogen evolution under visible light

Photocatalytic H2 evolution is of prime importance in the energy crisis and in lessening environmental pollution. Adopting a single semiconductor as a photocatalyst remains a formidable challenge. However, the construction of an S-scheme heterojunction is a promising method for efficient water splitting. In this work, CdS nanoparticles were loaded onto NiS nanosheets to form CdS/NiS nanocomposites using hollow Ni(OH)2 as a precursor. The differences in the Fermi energy levels between the two components of CdS and NiS resulted in the formation of a built-in electric field in the nanocomposite. Density functional theory (DFT) calculations reveal that the S-scheme charge transfer driven by the built-in electric field can accelerate the effective separation of photogenerated carriers, which is conducive to efficient photocatalytic hydrogen evolution. The hydrogen evolution rate of the optimized photocatalyst is 39.68 mmol·g-1 h-1, which is 6.69 times that of CdS under visible light. This work provides a novel strategy to construct effective photocatalysts to relieve the environmental and energy crisis.

Novel Bilayer SnO2 Electron Transport Layers with Atomic Layer Deposition for High-Performance α-FAPbI3 Perovskite Solar Cells

Perovskite solar cells (PSCs) based on the SnO2 electron transport layer (ETL) have achieved remarkable photovoltaic efficiency. However, the commercial SnO2 ETLs show various shortcomings. The SnO2 precursor is prone to agglomeration, resulting in poor morphology with numerous interface defects. Additionally, the open circuit voltage (Voc ) would be constrained by the energy level mismatch between the SnO2 and the perovskite. And, few studies designed SnO2 -based ETLs to promote crystal growth of PbI2 , a crucial prerequisite for obtaining high-quality perovskite films via the two-step method. Herein, we proposed a novel bilayer SnO2 structure that combined the atomic layer deposition (ALD) and sol-gel solution to well address the aforementioned issues. Due to the unique conformal effect of ALD-SnO2 , it can effectively modulate the roughness of FTO substrate, enhance the quality of ETL, and induce the growth of PbI2 crystal phase to develop the crystallinity of perovskite layer. Furthermore, a created built-in field of the bilayer SnO2 can help to overcome the electron accumulation at the ETL/perovskite interface, leading to a higher Voc and fill factor. Consequently, the efficiency of PSCs with ionic liquid solvent increases from 22.09% to 23.86%, maintaining 85% initial efficiency in a 20% humidity N2 environment for 1300 h.