Nickel-Doped Carbon Dots as an Efficient and Stable Electrocatalyst for Urea Oxidation

Nickel-Doped Decatungstate as a Robust Photocatalyst for Violet Light-Triggered Redox Coupling Conversion of Alcohol and Water to Aldehyde/Ketone and Hydrogen

The effective coupling of photoinduced alcohol oxidation and water reduction may economically produce hydrogen (H2) from water, which is of great significance in solving the current energy crisis. This study discloses that decatungstate (DT) and especially Ni2+ions-doped DTs are active for the photoreaction of benzyl alcohol with H2O, and under 48 h of violet light illumination, the best 1%Ni-DT yields ca. 86.1% benzoic acid and a 4.65 h-1 H2 generation efficiency (turnover frequency, TOF). Also, 1%Ni-DT is efficient for the photoredox coupling reaction of aliphatic and especially aromatic primary/secondary alcohols with water. A series of characterizations support that the doubled-reduced H2DT produced from the photoreaction plays a key role in water reduction to H2, which is accelerated by the doped Ni2+. In particular, it and the derived Ni3+ may construct a Z-type catalyst for water overall splitting, thereby hoisting the acid yield and H2 amount in the later stage of the photoreaction.

Single-Atom Co─O4 Sites Embedded in a Defective-Rich Porous Carbon Layer for Efficient H2O2 Electrosynthesis

The production of hydrogen peroxide (H2O2) via the two-electron electrochemical oxygen reduction reaction (2e- ORR) is an essential alteration in the current anthraquinone-based method. Herein, a single-atom Co─O4 electrocatalyst is embedded in a defective and porous graphene-like carbon layer (Co─O4@PC). The Co─O4@PC electrocatalyst shows promising potential in H2O2 electrosynthesis via 2e- ORR, providing a high H2O2 selectivity of 98.8% at 0.6 V and a low onset potential of 0.73 V for generating H2O2. In situ surface-sensitive attenuated total reflection Fourier transform infrared spectra and density functional theory calculations reveal that the electronic and geometric modification of Co─O4 induced by defective carbon sites result in decreased d-band center of Co atoms, providing the optimum adsorption energies of OOH* intermediate. The H-cell and flow cell assembled using Co─O4@PC as the cathode present long-term stability and high efficiency for H2O2 production. Particularly, a high H2O2 production rate of 0.25 mol g-1 cat h-1 at 0.6 V can be obtained by the flow cell. The in situ-generated H2O2 can promote the degradation of rhodamine B and sterilize Staphylococcus aureus via the Fenton process. This work can pave the way for the efficient production of H2O2 by using Co─O4 single atom electrocatalyst and unveil the electrocatalytic mechanism.

Recent Advances in Catalyst Design and Performance Optimization of Nanostructured Cathode Materials in Zinc-Air Batteries

This review focuses on the advanced design and optimization of nanostructured zinc-air batteries (ZABs), with the aim of boosting their energy storage and conversion capabilities. The findings show that ZABs favor porous nanostructures owing to their large surface area, and this enhances the battery capacity, catalytic activity, and life cycle. In addition, the nanomaterials improve the electrical conductivity, ion transport, and overall battery stability, which crucially reduces dendrite growth on the zinc anodes and improves cycle life and energy efficiency. To obtain a superior performance, the importance of controlling the operational conditions and using custom nanostructural designs, optimal electrode materials, and carefully adjusted electrolytes is highlighted. In conclusion, porous nanostructures and nanoscale materials significantly boost the energy density, longevity, and efficiency of Zn-air batteries. It is suggested that future research should focus on the fundamental design principles of these materials to further enhance the battery performance and drive sustainable energy solutions.

Carbon Dots: Synthesis, Characterizations, and Recent Advancements in Biomedical, Optoelectronics, Sensing, and Catalysis Applications

Carbon nanodots (CNDs), a fascinating carbon-based nanomaterial (typical size 2-10 nm) owing to their superior optical properties, high biocompatibility, and cell penetrability, have tremendous applications in different interdisciplinary fields. Here, in this Review, we first explore the superiority of CNDs over other nanomaterials in the biomedical, optoelectronics, analytical sensing, and photocatalysis domains. Beginning with synthesis, characterization, and purification techniques, we even address fundamental questions surrounding CNDs such as emission origin and excitation-dependent behavior. Then we explore recent advancements in their applications, focusing on biological/biomedical uses like specific organelle bioimaging, drug/gene delivery, biosensing, and photothermal therapy. In optoelectronics, we cover CND-based solar cells, perovskite solar cells, and their role in LEDs and WLEDs. Analytical sensing applications include the detection of metals, hazardous chemicals, and proteins. In catalysis, we examine roles in photocatalysis, CO2 reduction, water splitting, stereospecific synthesis, and pollutant degradation. With this Review, we intend to further spark interest in CNDs and CND-based composites by highlighting their many benefits across a wide range of applications.

Facilitation of Fenton-Like Reaction of Copper-Nitrogen-Doped Carbon-Based Nanocatalysts by Enhancing Hydroxyl Adsorption on Single-Atom Cu-NxC4- x Sites

Copper-nitrogen-doped carbon-based nanocatalysts (Cu-NCs), containing atomically dispersed Cu-NxC4- x sites, are efficient in boosting the Fenton-like reaction. However, the mechanisms of the Fenton-like reaction, including the pH effect on the products and the effect of the coordination environment on catalytic activity, remain controversial, restricting the development of Cu-NCs. Cu-NCs are experimentally synthesized with Cu-N4 sites and prove that the Fenton-like reaction generates mainly hydroxyl radicals (·OH) in the acidic but ·OH and superoxide radicals (·O2 -) in the neutral. The density functional theory (DFT) calculations reveal that the catalytic activity of Cu-NCs in the Fenton-like reaction is associated with the adsorption strength of ·OH at the Cu site. Further investigation of the effect of the coordination environment of Cu-NCs indicates that the Cu-N2C2 site, which can enhance the ·OH adsorption strength, is an ideal catalyst site for the Fenton-like reaction. These results open the way to facilitating the catalytic activity of Cu-NCs in the Fenton-like reaction.

In situ grown high-valence Mo-doped NiCo Prussian blue analogue for enhanced urea electrooxidation

Mo-doped NiCo Prussian blue analogue (PBA) electrocatalysts self-supported on Ni foam are elaborately designed, which exhibit a low potential of 1.358 V (vs. RHE) to reach 100 mA cm-2 for catalyzing the urea oxidation reaction (UOR). The incorporation of high-valence Mo (+6) modifies the electronic structure and improves the electron transfer ability. Using X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) techniques, we confirm the effect of Mo doping on the NiCo PBA electronic structure.

Water-Stable Fluorous Metal-Organic Frameworks with Open Metal Sites and Amine Groups for Efficient Urea Electrocatalytic Oxidation

Urea oxidation reaction (UOR) is one of the promising alternative anodic reactions to water oxidation that has attracted extensive attention in green hydrogen production. The application of specifically designed electrocatalysts capable of declining energy consumption and environmental consequences is one of the major challenges in this field. Therefore, the goal is to achieve a resistant, low-cost, and environmentally friendly electrocatalyst. Herein, a water-stable fluorinated Cu(II) metalorganic framework (MOF) {[Cu2 (L)(H2 O)2 ]·(5DMF)(4H2 O)}n (Cu-FMOF-NH2 ; H4 L = 3,5-bis(2,4-dicarboxylic acid)-4-(trifluoromethyl)aniline) is developed utilizing an angular tetracarboxylic acid ligand that incorporates both trifluoromethyl (-CF3 ) and amine (-NH2 ) groups. The tailored structure of Cu-FMOF-NH2 where linkers are connected by fluoride bridges and surrounded by dicopper nodes reveals a 4,24T1 topology. When employed as electrocatalyst, Cu-FMOF-NH2 requires only 1.31 V versus reversible hydrogen electrode (RHE) to deliver 10 mA cm-2 current density in 1.0 m KOH with 0.33 m urea electrolyte and delivered an even higher current density (50 mA cm-2 ) at 1.47 V versus RHE. This performance is superior to several reported catalysts including commercial RuO2 catalyst with overpotential of 1.52 V versus RHE. This investigation opens new opportunities to develop and utilize pristine MOFs as a potential electrocatalyst for various catalytic reactions.