Synergistic Solar-Driven Freshwater Generation and Electricity Output Empowered by Wafer-Scale Nanostructured Silicon

Recent Advances in Fibrous Materials for Hydroelectricity Generation

Depleting fossil energy sources and conventional polluting power generation pose a threat to sustainable development. Hydroelectricity generation from ubiquitous and spontaneous phase transitions between liquid and gaseous water has been considered a promising strategy for mitigating the energy crisis. Fibrous materials with unique flexibility, processability, multifunctionality, and practicability have been widely applied for fibrous materials-based hydroelectricity generation (FHG). In this review, the power generation mechanisms, design principles, and electricity enhancement factors of FHG are first introduced. Then, the fabrication strategies and characteristics of varied constructions including 1D fiber, 1D yarn, 2D fabric, 2D membrane, 3D fibrous framework, and 3D fibrous gel are demonstrated. Afterward, the advanced functions of FHG during water harvesting, proton dissociation, ion separation, and charge accumulation processes are analyzed in detail. Moreover, the potential applications including power supply, energy storage, electrical sensor, and information expression are also discussed. Finally, some existing challenges are considered and prospects for future development are sincerely proposed.

Dual Plasmons with Bioinspired 3D Network Structure Enabling Ultrahigh Efficient Solar Steam Generation

Plasmonic nanomaterials such as Au, Ag, and Cu are widely recognized for their strong light-matter interactions, making them promising photothermal materials for solar steam generation. However, their practical use in water evaporation is significantly limited by the trade-off between high costs and poor stability. In this regard, we introduce a novel, nonmetallic dual plasmonic TiN/MoO3-x composite. This composite features a three-dimensional, urchin-like biomimetic structure, with plasmonic TiN nanoparticles embedded within a network of plasmonic MoO3-x nanorods. As a solar absorber, the TiN/MoO3-x composite achieves a high evaporation rate of ∼2.05 kg m-2 h-1 with an energy efficiency up to 106.7% under 1 sun illumination, outperforming the state-of-the-art plasmonic systems. The high photothermal stability and unique dual plasmonic nanostructure of the TiN/MoO3-x composite are demonstrated by advanced in situ laser-heating transmission electron microscopy and photon-induced near-field electron microscopy/electron energy-loss spectroscopy, respectively. This work provides new inspiration for the design of plasmonic materials.

Cost Effective Photothermal Materials Selection for Direct Solar-Driven Evaporation

The cornerstone of eco-friendly and affordable freshwater generation lies in harnessing solar energy for water evaporation. This process involves extracting vapor from liquid water using solar energy. Numerous innovative, low-cost materials have been proposed for this purpose. These materials aim to enable highly controllable and efficient conversion of solar energy into thermal energy while maintaining high cost-effectiveness. Here, in this review paper, we outline the advancements in solar-driven evaporation technology with a focus on optimizing synthesis methods and materials cost. It prioritizes refining evaporation efficiency and affordability using inventive manufacturing methods. By utilizing innovative reasonably priced materials, this process not only ensures efficient resource utilization but also fosters technological advancements in renewable energy applications. Moreover, the affordability of these materials makes solar-powered water evaporation accessible to a wider range of communities, empowering them to address water scarcity challenges.

Integrating Photoelectrochemical Feature on a Hydrovoltaic Chip with High-Salinity Adaption as a Self-Powered Device for Formaldehyde Monitoring

Alternative energy sources are required due to the decline in fossil fuel resources. Therefore, devices that utilize hydrovoltaic technology and light energy have drawn widespread attention because they are emission-free and solar energy is inexhaustible. However, previous investigations mainly focused on accelerating the water evaporation rate at the electrode interface. Here, a cooperative photoelectrochemical effect on a hydrovoltaic chip is achieved using NH2-MIL-125-modified TiO2 nanotube arrays (NTs). This device demonstrated significantly improved evaporation-triggered electricity generation. Under LED illumination, the open-circuit voltage (VOC) of the NH2-MIL-125/TiO2NTs active layer of the hydrovoltaic chip was enhanced by 90.3% (up to 400.2 mV). Furthermore, the prepared hydrovoltaic chip showed good high-salinity tolerance, maintaining 74.6% of its performance even in 5 M NaCl. By introducing a Schiff-based reaction between the active layer and formaldehyde, a fully integrated flexible sensor was successfully fabricated for formaldehyde monitoring, and a low limit of detection of 5.2 × 10-9 M was achieved. This novel strategy for improving the performance of hydrovoltaic devices offers a completely new general approach to construct self-powered devices for point-of-care sensing.

Highly Stretchable, Knittable, Wearable Fiberform Hydrovoltaic Generators Driven by Water Transpiration for Portable Self-Power Supply and Self-Powered Strain Sensor

The development of excellently stretchable, highly mobile, and sustainable power supplies is of great importance for self-power wearable electronics. Transpiration-driven hydrovoltaic power generator (HPG) has been demonstrated to be a promising energy harvesting strategy with the advantages of negative heat and zero-carbon emissions. Herein, this work demonstrates a fiber-based stretchable HPG with the advantages of high output, portability, knittability, and sustainable power generation. Based on the functionalized micro-nano water diffusion channels constructed by the discarded mask straps (MSs) and oxidation-treated carbon nanomaterials, the applied water can continuously produce electricity during the spontaneous flow and diffusion. Experimentally, when a tiny 0.1 mL of water encounters one end of the proposed HPG, the centimeter-length device can yield a peak voltage of 0.43 V, peak current of 29.5 µA, and energy density of 5.833 mW h cm-3. By efficiently integrating multiple power generation units, sufficient output power can be provided to drive commercial electronic devices even in the stretched state. Furthermore, due to the reversibility of the electrical output during dynamic stretching-releasing, it can passively convert physiological activities and motion behaviors into quantifiable and processable current signals, opening up HPG's application in the field of self-powered wearable sensing.

Surface Modification of Silicon Nanowires with Siloxane Molecules for High-Performance Hydrovoltaic Devices

Hydrovoltaic devices (HDs) based on silicon nanowires (SiNWs) have attracted significant attention due to their potential of high output power and good compatibility with Si-based photovoltaic devices for integrated power systems. However, it remains a major challenge to further improve the output performance of SiNW HDs for practical applications. Here, a new strategy to modify the surface of SiNWs with siloxane molecules is proposed to improve the output performance of the SiNW HDs. After modification, both the open-circuit voltage (Voc) and short-circuit current density (Jsc) of n-type SiNW HDs can be improved by approximately 30%, while the output power density can be greatly increased by over 200%. With siloxane modification, Si-OH groups on the surface of typical SiNWs are replaced by Si-O-Si chemical bonds that have a weaker electron-withdrawing capability. More free electrons in n-type SiNWs are liberated from surface bound states and participate in directed flow induced by water evaporation, thereby improving the output performance of HDs. The improved performance is significant for system integration applications as it reduces the number of required devices. Three siloxane-modified SiNW HDs in series are able to drive a 2 V light-emitting diode (LED), whereas four unmodified devices in series are initially needed for the same task. This work provides a simple yet effective strategy for surface modification to improve the output performance of SiNW HDs. Further research into the effect of different surface modifications on the performance of SiNW HDs will greatly promote their performance enhancement and practical applications.

Photothermoelectric Synergistic Hydrovoltaic Effect: A Flexible Photothermoelectric Yarn Panel for Multiple Renewable-Energy Harvesting

The human body is in a complex environment affected by body heat, light, and sweat, requiring the development of a wearable multifunctional textile for human utilization. Meanwhile, the traditional thermoelectric yarn is limited by expensive and scarce inorganic thermoelectric materials, which restricts the development of thermoelectric textiles. Therefore, in this paper, photothermoelectric yarns (PPDA-PPy-PEDOT/CuI) using organic poly(3,4-ethylenedioxythiophene) (PEDOT) and inorganic thermoelectric material cuprous iodide (CuI) are used for the thermoelectric layer and poly(pyrrole) (PPy) for the light-absorbing layer. With the introduction of PPy, the temperature difference of the photothermoelectric yarn can be increased for a better voltage output. Subsequently synergizing the photothermoelectric effect with the hydrovoltaic effect to create higher electric potentials, a single wet photothermoelectric yarn obtained by preparation can be irradiated under an infrared lamp at a voltage of up to 0.47 V. Finally, the photothermoelectric yarn PPDA-PPy-PEDOT/CuI was assembled in a series and parallel to obtain a photothermoelectric yarn panel, which was able to output 41.19 mV under an infrared lamp, and the synergistic photothermoelectric and hydrovoltaic effects of the photothermoelectric panel were tested outdoors on human body, and we found that the voltage was able to reach approximately 0.16 V under sunlight. Therefore, the voltage values obtained from the photothermoelectric yarns in this study are competitive and provide a new research idea for the study of photothermoelectric yarns.

A hierarchical porous aerohydrogel for enhanced water evaporation

Natural solar-powered steam generation provides a promising strategy to deal with deteriorating water resources. However, the practical applications of this strategy are limited by the tedious manufacturing of structures at micro-nano levels to concentrate heat and transport water to heat-localized regions. Herein, this work reports the fabrication of hierarchically porous aerohydrogel with enhanced light absorption and thermal localization at the air-solid interface. This aerohydrogel steam generator is fabricated by a simple yet controllable micropore generation approach to assemble air and hydrogel into hierarchically porous gas-solid hybrids. The tunable micropore size in a wide range from 99±49µm to 316±58μm not only enables contrasting sunlight absorptance (0.2 - 2.5µm) by reducing the reflection of solar light but also harnesses water transportation to the heating region via a capillary force-driven liquid flow. Therefore, a solar-vapor conversion efficiency of 91.3% under one sun irradiation was achieved using this aerohydrogel evaporator, reaching a ready evaporation rate of 2.76kg m-2 h-1 and 3.71kg m-2 h-1 under one and two sun irradiations, respectively. Our work provides a versatile and scalable approach to engineering porous hydrogels for highly efficient steam generation and opens an avenue for other potential practical applications based on this aerohydrogel.