Interface Engineering in 2D/2D Heterogeneous Photocatalysts

Solar-Driven Biomass Reforming for Hydrogen Generation: Principles, Advances, and Challenges

Hydrogen (H2) has emerged as a clean and versatile energy carrier to power a carbon-neutral economy for the post-fossil era. Hydrogen generation from low-cost and renewable biomass by virtually inexhaustible solar energy presents an innovative strategy to process organic solid waste, combat the energy crisis, and achieve carbon neutrality. Herein, the progress and breakthroughs in solar-powered H2 production from biomass are reviewed. The basic principles of solar-driven H2 generation from biomass are first introduced for a better understanding of the reaction mechanism. Next, the merits and shortcomings of various semiconductors and cocatalysts are summarized, and the strategies for addressing the related issues are also elaborated. Then, various bio-based feedstocks for solar-driven H2 production are reviewed with an emphasis on the effect of photocatalysts and catalytic systems on performance. Of note, the concurrent generation of value-added chemicals from biomass reforming is emphasized as well. Meanwhile, the emerging photo-thermal coupling strategy that shows a grand prospect for maximally utilizing the entire solar energy spectrum is also discussed. Further, the direct utilization of hydrogen from biomass as a green reductant for producing value-added chemicals via organic reactions is also highlighted. Finally, the challenges and perspectives of photoreforming biomass toward hydrogen are envisioned.

MXene-mediated Interfacial Growth of 2D-2D Heterostructured Nanomaterials as Cathodes for Zn-based Aqueous Batteries

In this study, we introduce a novel approach for synthesizing two-dimensional (2D) MXene heterostructures featuring a sandwiched and cross-linked network structure. This method addresses the common issue of activity degradation in 2D nanomaterials caused by inevitable aggregation. By utilizing the distinct surface characteristics of MXene, we successfully induced the growth of various 2D nanomaterials on MXene substrates. This strategy effectively mitigates self-stacking defects and augments the exposure of surface areas. In particular, the obtained 2D-2D MXene@NiCo-layered double hydroxide (MH-NiCo) heterostructures exhibit enhanced structural stability, improved chemical reversibility, and heightened charge transfer efficiency, outperforming pure NiCo LDH. The aqueous MH-Ni4Co1//Zn@carbon cloth (MH-Ni4Co1//Zn@CC) battery demonstrates exceptional performance with a remarkable specific capacity of 0.61 mAh cm-2, maintaining 96.6 % capacitance after 2300 cycles. Additionally, it achieves an energy density of 1.047 mWh cm-2 and a power density of 32.899 mW cm-2. This research not only paves the way for new design paradigms in energy-related nanomaterials but also offers invaluable insights for the application and optimization of 2D-2D heterostructures in advanced electrochemical devices.

Photocatalytic degradation of chlorinated organic pollutants by ZnS@ZIF-8 composite through hydrogen peroxide generation by activating dioxygen under simulated sunlight irradiation

Photocatalytic hydrogen peroxide (H2O2) production and its application in advanced oxidation processes (AOPs) are regarded as low-cost and environmentally friendly wastewater treatment processes. Herein, by modifying a small amount of sulphide on the zeolitic imidazolate framework-8 (ZIF-8), a ZnS@ZIF-8 composite and used for photocatalytic H2O2 production to degrade chlorinated organic pollutants under simulated sunlight (SSL). ZnS@ZIF-8 composite could enhance the separation of photo-induced charge carriers, promote electron transfer from zinc sulphide (ZnS) to ZIF-8, which exhibited good selectivity for the two-electron oxygen reduction reaction (2e--ORR) and two-electron water oxidation (2e--WOR) pathways. Based on oxygen (O2) activation, the developed ZnS@ZIF-8/O2/SSL system could achieve 6.43 mmol/L H2O2 production within 150 min, which was approximately 8.66 and 10.36 times higher than that of the ZnS/O2/SSL and ZIF-8/O2/SSL systems, respectively. In the ZnS@ZIF-8/O2/SSL system, the ORR, WOR and H2O2 photolysis led to the generation of hydroxyl radical (•OH), while the photochemical behavior of ZnS in ZnS@ZIF-8 composite resulted in the generation of active hydrogen (*H). Benefitting from the high concentration of H2O2 and the coexistence of redox species in the ZnS@ZIF-8/O2/SSL system, various chlorinated organic pollutants could be dechlorinated and mineralized. In addition, a possible mechanism for photocatalytic H2O2 production was also proposed. Importantly, the proposed process did not involve an additional sacrificial agent or Fenton-like catalysts. This work provides insights into the potential application of ZnS@ZIF-8 composite for H2O2 production and wastewater treatment.

High-mass-loading cobalt iron phosphide@nickel vanadium layered double hydroxide heterogeneous nanosheet arrays for hybrid supercapacitors

Designing multidimensional heterostructures on flexible substrates is an efficient approach to resolve the low energy density of supercapacitors. Herein, a three-dimensional (3D) porous cobalt iron phosphide (CoFeP)@nickel vanadium-layered double hydroxide (NiV-LDH) heterostructure has been prepared anchored on carbon cloth (CC) substrate. In this nanoarchitecture, NiV-LDH nanosheets are densely wrapped on the surface of CoFeP nanosheets, which forms a hierarchically porous framework with an enlarged surface area and accessible pore channels. Benefiting from the strong interaction and synergistic effect between CoFeP and NiV-LDH, the well-defined heterostructure can realize simultaneously rich redox active sites, rapid reaction dynamics, and good structural stability. Thus, the binder-free CoFeP@NiV-LDH electrode with a high mass loading of 6.47 mg cm-2 displays a significantly increased specific capacity of 903.1C g-1 (2.35C cm-2) at 1 A g-1 and enhanced rate capability when compared to pristine CoFeP and NiV-LDH. Additionally, the assembled hybrid supercapacitor (HSC) yields an energy density of 77.9 Wh kg-1/0.98 Wh cm-2 and excellent long-term stability. This research proposes a rational route for designing heterogeneous micro-/nanoarchitectures with commercial-level mass loading for the practical application of high-energy-density supercapacitors.

Free-Electron Inversive Modulation to Charge Antibonding Orbital of ReS2 Cocatalyst for Efficient Photocatalytic Hydrogen Generation

The free electron transfer between cocatalyst and photocatalyst has a great effect on the bonding strength between the active site and adsorbed hydrogen atom (Hads ), but there is still a lack of effective means to purposely manipulate the electron transfer in a beneficial direction of H adsorption/desorption activity. Herein, when ReSx cocatalyst is loaded on TiO2 surface, a spontaneous free-electron transfer from ReSx to TiO2 happens due to the smaller work function of ReSx , causing an over-strong S-Hads bond. To prevent the over-strong S-Hads bonds of ReSx in the ReSx /TiO2 , a free-electron reversal transfer strategy is developed to weaken the strong S-Hads bonds via increasing the work function of ReSx by incorporating O to produce ReOSx cocatalyst. Research results attest that a larger work function of ReOSx than that of TiO2 can induce reversal transfer of electrons from TiO2 to ReOSx to produce electron-rich S(2+δ)- , causing the increased antibonding-orbital occupancy of S-Hads in ReOSx /TiO2 . Accordingly, the stability of adsorbed H on S sites is availably decreased, thus weakening the S-Hads of ReOSx . In this case, an electron-rich S(2+δ)- -mediated "capture-hybridization-conversion" mechanism is raised . Benefiting from such property, the resultant ReOSx /TiO2 photocatalyst exhibits a superior H2 -evolution rate of 7168 µmol h-1 g-1 .

Triggering the Channel-Sulfur Sites in 1T'-ReS2 Cocatalyst toward Splendid Photocatalytic Hydrogen Generation

Electron density manipulation of active sites in cocatalysts is of great essential to realize the optimal hydrogen adsorption/desorption behavior for constructing high-efficient H2 -evolution photocatalyst. Herein, a strategy about weakening metal-metal bond strength to directionally optimize the electron density of channel-sulfur(S) sites in 1T' Re1- x Mox S2 cocatalyst is clarified to improve their hydrogen adsorption strength (S─H bond) for rapid H2 -production reaction. In this case, the ultrathin Re1- x Mox S2 nanosheet is in situ anchored on the TiO2 surface to form Re1- x Mox S2 /TiO2 photocatalyst by a facial molten salt method. Remarkably, numerous visual H2 bubbles are constantly generated on the optimal Re0.92 Mo0.08 S2 /TiO2 sample with a 10.56 mmol g-1  h-1 rate (apparent quantum efficiency is about 50.6%), which is 2.6 times higher than that of traditional ReS2 /TiO2 sample. Density functional theory and in situ/ex situ X-ray photoelectron spectroscopy results collectively demonstrate that the weakened Re─Re bond strength via Mo introduction can induce the formation of unique electron-deficient channel-S sites with suitable electron density, which yield thermoneutral S─H bonds to realize superior interfacial H2 -generation performance. This work provides fundamental guidance on purposely optimizing the electronic state of active sites by manipulating the intrinsic bonding structure, which opens an avenue for designing efficacious photocatalytic materials.

Enhanced visible-light-driven photocatalytic activity in SiPGaS/arsenene-based van der Waals heterostructures

Van der Waals heterostructures (vdWHs) showcase robust and tunable light-matter interactions, establishing an intriguing realm for investigating atomic-scale photocatalytic properties. Here, we employ ab initio methods to study the photocatalytic and optical properties of semiconducting SiPGaS/arsenene-based vdWHs with a type-II band alignment. Across the heterointerfaces, there exists significant built-in electric fields and large potential drop, in turn facilitating the spatial separation of photo-generated electron-hole pairs. These vdWHs further possess high carrier mobility in the order of 102 cm2V⁻1S⁻1, which combining with appropriate band edge positions, endow the vdWHs an absorption coefficient of ∼10⁵ cm⁻1 to harvest a maximal portion of the solar spectrum for visible-light-driven photocatalytic applications. Our findings also reveal transition of the type-II band alignment in a type-III configuration via compressive strain for tunneling field-effect transistor application. Furthermore, both types of vdWHs exhibit enhanced suitability for photocatalysis under conditions with a pH of 2.

Ferroic Phases in Two-Dimensional Materials

Two-dimensional (2D) ferroics, namely ferroelectric, ferromagnetic, and ferroelastic materials, are attracting rising interest due to their fascinating physical properties and promising functional applications. A variety of 2D ferroic phases, as well as 2D multiferroics and the novel 2D ferrovalleytronics/ferrotoroidics, have been recently predicted by theory, even down to the single atomic layers. Meanwhile, some of them have already been experimentally verified. In addition to the intrinsic 2D ferroics, appropriate stacking, doping, and defects can also artificially regulate the ferroic phases of 2D materials. Correspondingly, ferroic ordering in 2D materials exhibits enormous potential for future high density memory devices, energy conversion devices, and sensing devices, among other applications. In this paper, the recent research progresses on 2D ferroic phases are comprehensively reviewed, with emphasis on chemistry and structural origin of the ferroic properties. In addition, the promising applications of the 2D ferroics for information storage, optoelectronics, and sensing are also briefly discussed. Finally, we envisioned a few possible pathways for the future 2D ferroics research and development. This comprehensive overview on the 2D ferroic phases can provide an atlas for this field and facilitate further exploration of the intriguing new materials and physical phenomena, which will generate tremendous impact on future functional materials and devices.

Synergistic photothermal conversion and photocatalysis in 2D/2D MXene/Bi2S3 hybrids for efficient solar-driven water purification

Plasmonic hybrids are regarded as promising candidates for water purification due to their structure-dependent photocatalysis and photothermal performance. It remains a challenge to develop materials that possess these two characteristics for efficient water purification. Herein, plasmonic Ti3C2Tx/Bi2S3 two-dimensional (2D)/2D hybrids were prepared for efficient solar-driven water purification via the combination of photothermal conversion and photocatalysis. Benefitting from broad light absorption, large 2D/2D interfaces, and efficient charge transfer, the binary hybrids showed high-efficiency photothermal conversion and photothermal-assisted photocatalytic activity. By depositing these 2D/2D hybrids on a hydrophilic and porous cotton piece, the Ti3C2Tx/Bi2S3 membrane displayed a high water evaporation rate and solar-to-vapor efficiency under one-sun irradiation. The solar-driven evaporation of seawater, heavy metal ion solution, and dye solution jointly indicated that the plasmonic membrane shows great potential for drinkable water generation and industrial wastewater treatment. Most importantly, the synergistic effect of photothermal evaporation and photocatalysis of the Ti3C2Tx/Bi2S3 membrane on water purification was demonstrated. The polluted water can not only be treated by evaporation, but also be degraded via photocatalysis under solar light irradiation. This work provides new insight into designing functional materials for water purification based on the combination of photothermal conversion and photocatalysis.

Tunable electronic and optical properties of ferroelectric WS2/Ga2O3heterostructures

To integrate two-dimensional (2D) materials into van der Waals heterostructures (vdWHs) is regarded as an effective strategy to achieve multifunctional devices. The vdWHs with strong intrinsic ferroelectricity is promising for applications in the design of new electronic devices. The polarization reversal transitions of 2D ferroelectric Ga2O3layers provide a new approach to explore the electronic structure and optical properties of modulated WS2/Ga2O3vdWHs. The WS2/Ga2O3↑ and WS2/Ga2O3↓ vdWHs are designed to explore possible characteristics through the electric field and biaxial strain. The biaxial strain can effectively modulate the mutual transition of two mode vdWHs in type II and type I band alignment. The strain engineering enhances the optical absorption properties of vdWHs, encompassing excellent optical absorption properties in the range from infrared to visible to ultraviolet, ensuring promising applications in flexible electronics and optical devices. Based on the highly modifiable physical properties of the WS2/Ga2O3vdWHs, we have further explored the potential applications for the field-controlled switching of the channel in MOSFET devices.

2D/2D Biochar/Bi2WO6 Hybrid Nanosheets with Enhanced Visible-Light-Driven Photocatalytic Activities for Organic Pollutants Degradation

In this work, a novel two-dimensional/two-dimensional (2D/2D) hybrid photocatalyst consisting of Bi2WO6 (BWO) nanosheets and cotton fibers biochar (CFB) nanosheets was successfully prepared via a facile hydrothermal process. The as-prepared photocatalysts were characterized by a variety of techniques, including X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis diffuse reflectance spectroscopy. It was revealed that amorphous CFB nanosheets were uniformly immobilized on the surface of crystalline BWO nanosheets, and an intimate contact between CFB and BWO was constructed. The photocatalytic activities of the prepared BWO and CFB-BWO photocatalysts were evaluated by photocatalytic degradation of rhodamine B (RhB) and tetracycline hydrochloride (TC-HCl) in aqueous solutions under visible-light irradiation. Compared to the pristine BWO, the CFB-BWO composite photocatalysts exhibited significant enhancement in photocatalytic activities. Among all CFB-BWO samples, the 9CFB-BWO sample with the CFB mass ratio of 9% exhibited optimal photocatalytic activities for RhB or TC-HCl degradation, which was ca. 1.8 times or 2.4 times that of the pristine BWO, respectively. The improvement in photocatalytic activities of the CFB-BWO photocatalysts could be ascribed to the enhanced migration and separation of photogenerated charge carriers due to the formation of a 2D/2D interfacial heterostructure between CFB and BWO. Meanwhile, the possible mechanism of CFB-BWO for enhanced photocatalytic performance was also discussed. This work may provide a new approach to designing and developing novel BWO-based photocatalysts for the highly efficient removal of organic pollutants.

Selective Cocatalyst Decoration of Narrow-Bandgap Broken-Gap Heterojunction for Directional Charge Transfer and High Photocatalytic Properties

Narrow-bandgap semiconductors are promising photocatalysts facing the challenges of low photoredox potentials and high carrier recombination. Here, a broken-gap heterojunction Bi/Bi2 S3 /Bi/MnO2 /MnOx , composed of narrow-bandgap semiconductors, is selectively decorated by Bi, MnOx nanodots (NDs) to achieve robust photoredox ability. The Bi NDs insertion at the Bi2 S3 /MnO2 interface induces a vertical carrier migration to realize sufficient photoredox potentials to produce O2 •- and • OH active species. The surface decoration of Bi2 S3 /Bi/MnO2 by Bi and MnOx cocatalysts drives electrons and holes in opposite directions for optimal photogenerated charge separation. The selective cocatalysts decoration realizes synergistic surface and bulk phase carrier separation. Density functional theory (DFT) calculation suggests that Bi and MnOx NDs act as active sites enhancing the absorption and reactants activation. The decorated broken-gap heterojunction demonstrates excellent performance for full-light driving organic pollution degradation with great commercial application potential.

Boosting Interfacial Polarization Through Heterointerface Engineering in MXene/Graphene Intercalated-Based Microspheres for Electromagnetic Wave Absorption

Multi-layer 2D material assemblies provide a great number of interfaces beneficial for electromagnetic wave absorption. However, avoiding agglomeration and achieving layer-by-layer ordered intercalation remain challenging. Here, 3D reduced graphene oxide (rGO)/MXene/TiO2/Fe2C lightweight porous microspheres with periodical intercalated structures and pronounced interfacial effects were constructed by spray-freeze-drying and microwave irradiation based on the Maxwell-Wagner effect. Such approach reinforced interfacial effects via defects introduction, porous skeleton, multi-layer assembly and multi-component system, leading to synergistic loss mechanisms. The abundant 2D/2D/0D/0D intercalated heterojunctions in the microspheres provide a high density of polarization charges while generating abundant polarization sites, resulting in boosted interfacial polarization, which is verified by CST Microwave Studio simulations. By precisely tuning the 2D nanosheets intercalation in the heterostructures, both the polarization loss and impedance matching improve significantly. At a low filler loading of 5 wt%, the polarization loss rate exceeds 70%, and a minimum reflection loss (RLmin) of -67.4 dB can be achieved. Moreover, radar cross-section simulations further confirm the attenuation ability of the optimized porous microspheres. These results not only provide novel insights into understanding and enhancing interfacial effects, but also constitute an attractive platform for implementing heterointerface engineering based on customized 2D hierarchical architectures.

Single-Atom Phosphorus Defects Decorated CoP Cocatalyst Boosts Photocatalytic Hydrogen Generation Performance of Cd0.5 Zn0.5 S by Directed Separating the Photogenerated Carriers

Design and preparation of an efficient and nonprecious cocatalysts, with structural features and functionality necessary for improving photocatalytic performance of semiconductors, remain a formidable challenge until now. Herein, for the first time, a novel CoP cocatalyst with single-atom phosphorus vacancies defects (CoP-V_p ) is synthesized and coupled with Cd_0.5 Zn_0.5 S to build CoP-V_p @Cd_0.5 Zn_0.5 S (CoP-V_p @CZS) heterojunctions photocatalysts via a liquid phase corrosion method following by an in suit growth process. The nanohybrids deliver an attractive photocatalytic hydrogen production activity of 2.05 mmol h^-1 30 mg^-1 under visible-light irradiation, which is 14.66 times higher than that of the pristine ZCS samples. As expected, CoP-V_p further enhances the charge-separation efficiency of ZCS, in addition to the improvement of the electron transfer efficiency, which is confirmed by the ultrafast spectroscopies. Mechanism studies based on density functional theory calculations verify that Co atoms adjacent with single-atom V_p play the key role in translation, rotation, and transformation of electrons for H₂ O reduction. This scalable strategy focusing defect engineering provides a new insight into designing the highly active cocatalysts to boost the photocatalytic application.