High-Performance Photocatalytic Reduction of Nitrogen to Ammonia Driven by Oxygen Vacancy and Ferroelectric Polarization Field of SrBi4 Ti4 O15 Nanosheets

Toward Functionality and Deactivation of Metal-Single-Atom in Heterogeneous Photocatalysts

Single-atom heterogeneous catalysts (SAHCs) provide an enticing platform for understanding catalyst structure-property-performance relationships. The 100% atom utilization and adjustable local coordination configurations make it easy to probe reaction mechanisms at the atomic level. However, the progressive deactivation of metal-single-atom (MSA) with high surface energy leads to frequent limitations on their commercial viability. This review focuses on the atomistic-sensitive reactivity and atomistic-progressive deactivation of MSA to provide a unifying framework for specific functionality and potential deactivation drivers of MSA, thereby bridging function, purpose-modification structure-performance insights with the atomistic-progressive deactivation for sustainable structure-property-performance accessibility. The dominant functionalization of atomically precise MSA acting on properties and reactivity encompassing precise photocatalytic reactions is first systematically explored. Afterward, a detailed analysis of various deactivation modes of MSA and strategies to enhance their durability is presented, providing valuable insights into the design of SAHCs with deactivation-resistant stability. Finally, the remaining challenges and future perspectives of SAHCs toward industrialization, anticipating shedding some light on the next stage of atom-economic chemical/energy transformations are presented.

Modulating charge oriented accumulation via interfacial chemical-bond on In2O3/Bi2MoO6 heterostructures for photocatalytic nitrogen fixation

Photocatalytic nitrogen fixation presents an eco-friendly approach to converting atmospheric nitrogen into ammonia (NH3), but the process faces challenges due to rapid interface charge recombination. Here, we report an innovative charge transfer and oriented accumulation strategy using an In-O-Mo bond-modulated S-scheme heterostructure composed of In2O3/Bi2MoO6 (In/BMO) synthesized using a simple electrostatic assembly. The unique interfacial arrangement with optimal photocatalyst configuration (3 % In/BMO) enabled enhanced photogenerated electron separation and transfer, leading to a remarkable nitrogen fixation rate of approximately 150.9 μmol·gcat-1·h-1 under visible light irradiation. The performance of the photocatalyst was 9-fold and 27-fold higher than that of its pristine components, Bi2MoO6 and In2O3, respectively. The experimental and theoretical evaluation deemed interfacial In-O-Mo bonds crucial for rapid transfer and charge-oriented accumulation. Whereas the generated internal electric field drove the spatial separation and transfer of photo-generated electrons and holes, significantly enhancing the photocatalytic N2-to-NH3 conversion efficiency. The proposed work lays the foundation for designing S-scheme heterostructures with highly efficient interfacial bonds, offering a promising avenue for substantial improvements in photocatalytic nitrogen fixation.

Highly efficient nitrogen fixation over S-scheme heterojunction photocatalysts with enhanced active hydrogen supply

Photocatalytic N2 fixation is a promising strategy for ammonia (NH3) synthesis; however, it suffers from relatively low ammonia yield due to the difficulty in the design of photocatalysts with both high charge transfer efficiency and desirable N2 adsorption/activation capability. Herein, an S-scheme CoSx/ZnS heterojunction with dual active sites is designed as an efficient N2 fixation photocatalyst. The CoSx/ZnS heterojunction exhibits a unique pocket-like nanostructure with small ZnS nanocrystals adhered on a single-hole CoSx hollow dodecahedron. Within the heterojunction, the electronic interaction between ZnS and CoSx creates electron-deficient Zn sites with enhanced N2 chemisorption and electron-sufficient Co sites with active hydrogen supply for N2 hydrogenation, cooperatively reducing the energy barrier for N2 activation. In combination with the promoted photogenerated electron-hole separation of the S-scheme heterojunction and facilitated mass transfer by the pocket-like nanostructure, an excellent N2 fixation performance with a high NH3 yield of 1175.37 μmol g-1 h-1 is achieved. This study provides new insights into the design of heterojunction photocatalysts for N2 fixation.

Zinc-Doped BiOBr Hollow Microspheres for Enhanced Visible Light Photocatalytic Degradation of Antibiotic Residues

Photocatalysis represents an effective technology for environmental remediation. Herein, a series of Zn-doped BiOBr hollow microspheres are synthesized via one-pot solvothermal treatment of bismuth nitrate and dodecyl ammonium bromide in ethylene glycol along with a calculated amount of zinc acetate. Whereas the materials morphology and crystal structure remain virtually unchanged upon Zn-doping, the photocatalytic performance toward the degradation of ciprofloxacin is significantly improved under visible light irradiation. This is due to the formation of a unique band structure that facilitates the separation of photogenerated electron-hole pairs, reduced electron-transfer resistance, and enhanced electron mobility and carrier concentration. The best sample consists of a Zn doping amount of 1%, which leads to a 99.2% degradation rate of ciprofloxacin under visible photoirradiation for 30 min. The resulting photocatalysts also exhibit good stability and reusability, and the degradation intermediates exhibit reduced cytotoxicity compared to ciprofloxacin. These results highlight the unique potential of BiOBr-based photocatalysts for environmental remediation.

Design of Single-Atom Catalysts for E lectrocatalytic Nitrogen Fixation

The Electrochemical nitrogen reduction reaction (ENRR) can be used to solve environmental problems as well as energy shortage. However, ENRR still faces the problems of low NH3 yield and low selectivity. The NH3 yield and selectivity in ENRR are affected by multiple factors such as electrolytic cells, electrolytes, and catalysts, etc. Among these catalysts are at the core of ENRR research. Single-atom catalysts (SACs) with intrinsic activity have become an emerging technology for numerous energy regeneration, including ENRR. In particular, regulating the microenvironment of SACs (hydrogen evolution reaction inhibition, carrier engineering, metal-carrier interaction, etc.) can break through the limitation of intrinsic activity of SACs. Therefore, this Review first introduces the basic principles of NRR and outlines the key factors affecting ENRR. Then a comprehensive summary is given of the progress of SACs (precious metals, non-precious metals, non-metallic) and diatomic catalysts (DACs) in ENRR. The impact of SACs microenvironmental regulation on ENRR is highlighted. Finally, further research directions for SACs in ENRR are discussed.

Molecular understanding on ultraviolet photolytic degradation of cyano liquid crystal monomers

Cyano liquid crystal monomers (LCMs) are proposed as emerging chemical pollutants with persistent, bioaccumulative, and toxic properties. Herein, five cyano LCMs, including 4-cyano-4'-ethylbiphenyl (2CB), 4-Butyl-4'-cyanobiphenyl (4CB), 4-cyano-4'-ethoxybiphenyl (2OCB), 4-(trans-4-Ethylcyclohexyl)benzonitrile (2CHB) and 4-(trans-4-Vinylcyclohexyl)benzonitrile (2eCHB), were selected to investigate the reaction kinetics and excited state characteristic variations with their molecular structures by ultraviolet (UV) photolysis. Theoretical calculations reveal that the benzene ring, ethoxy and double bond can deeply alter the electron distribution of cyano LCMs. This will affect the exciton separation ability, excitation properties and active sites to electrophilic attack, causing the distinction in photolysis efficiency. Due to the effective charge separation during local excitation (LE) process and the property of being most susceptible to electrophilic attack by 1O2 and O2•-, 2eCHB with double bond exhibits the largest degradation rate. Conversely, the weakest exciton separation of 2OCB with ethoxy during charge transfer (CT) process limits its subsequent sensitized photolysis process. The molecular orbital and fragment contributions to holes and electrons further deepen the understanding of the excited states charge transfer. This study confirmed that the intrinsic molecular structure, chemical nature and existing sites directly defined the excitation and decomposition activity in the UV photolysis of cyano LCMs.

Defect Engineering of Bi2 WO6 for Enhanced Photocatalytic Degradation of Antibiotic Pollutants

Infiltration of excessive antibiotics into aquatic ecosystems plays a significant role in antibiotic resistance, a major global health challenge. It is therefore critical to develop effective technologies for their removal. Herein, defect-rich Bi2 WO6 nanoparticles are solvothermally prepared via epitaxial growth on pristine Bi2 WO6 seed nanocrystals, and the efficiency of the photocatalytic degradation of ciprofloxacin, a common antibiotic, is found to increase markedly from 62.51% to 98.27% under visible photoirradiation for 60 min. This is due to the formation of a large number of structural defects, where the synergistic interactions between grain boundaries and adjacent dislocations and oxygen vacancies lead to an improved separation and migration efficiency of photogenerated carriers and facilitate the adsorption and degradation of ciprofloxacin, as confirmed in experimental and theoretical studies. Results from this work demonstrate the unique potential of defect engineering for enhanced photocatalytic performance, a critical step in removing antibiotic contaminants in aquatic ecosystems.

Research progress on photocatalytic reduction of CO2 based on ferroelectric materials

Transforming CO2 into renewable fuels or valuable carbon compounds could be a practical means to tackle the issues of global warming and energy crisis. Photocatalytic CO2 reduction is more energy-efficient and environmentally friendly, and offers a broader range of potential applications than other CO2 conversion techniques. Ferroelectric materials, which belong to a class of materials with switchable polarization, are attractive candidates as catalysts due to their distinctive and substantial impact on surface physical and chemical characteristics. This review provides a concise overview of the fundamental principles underlying photocatalysis and the mechanism involved in CO2 reduction. Additionally, the composition and properties of ferroelectric materials are introduced. This review expands on the research progress in using ferroelectric materials for photocatalytic reduction of CO2 from three perspectives: directly as a catalyst, by modification, and construction of heterojunctions. Finally, the future potential of ferroelectric materials for photocatalytic CO2 reduction is presented. This review may be a valuable guide for creating reasonable and more effective photocatalysts based on ferroelectric materials.

Defect-Modified nano-BaTiO3 as a Sonosensitizer for Rapid and High-Efficiency Sonodynamic Sterilization

Multidrug-resistant bacteria caused by the unlimited overuse of antibiotics pose a great challenge to global health. An antibacterial method based on reactive oxygen species (ROS) is one of the effective strategies without inducing bacterial resistance. Owing to the ability of generating ROS, piezocatalytic material-mediated sonodynamic therapy (SDT) has drawn much attention. However, its major challenge is the low ROS generation efficiency in the piezocatalytic process due to the poor charge carrier concentration of piezoelectric materials. Vacancy engineering can regulate the charge density and largely promote ROS generation under ultrasound (US) irradiation. Herein, a US-responsive self-doped barium titanate with controlled oxygen vacancy (Vo) concentrations was successfully synthesized through a facile thermal reduction treatment at different temperatures (i.e., 350, 400, and 450 °C), and the corresponding samples were named as BTO-350, BTO-400, and BTO-450, respectively. Then, the effect of Vo concentrations on ROS generation efficiency during the piezocatalytic process was systematically studied. And BTO-400 was found to possess the highest piezocatalytic activity and excellent sonodynamic antibacterial performance against Escherichia coli and Staphylococcus aureus. Furthermore, its antibacterial mechanism was confirmed that the ROS generated under US could damage bacterial cell membrane and cause considerable leakage of cytoplasmic components and irreversible death of bacteria. Notably, the in vivo results illustrated that the BTO-400 could serve as an effective antibacterial agent and accelerate skin healing via SDT therapy. In all, the Vo defect-modified nano-BaTiO₃ has a noticeable potential to induce a rapid and efficient sterilization as well as skin tissue repair by SDT.