Continuously Flow Photothermal Catalysis Efficiently CO2 Reduction Over S-Scheme 2D/0D Bi5 O7 I-OVs/Cd0.5 Zn0.5 S Heterojunction with Strong Interfacial Electric Field

Enhanced Interfacial Electric Field of an S-Scheme Heterojunction by an Ultrasonication-Triggered Piezoelectric Effect for Sonocatalytic Therapy of Bacterial Infections

Sonodynamic therapy indicates advantages in combating antibiotics-resistant bacteria and deep tissue infections, but challenges remain in the less efficient charge transfer and reactive oxygen species (ROS) generation of sonosensitizers. Herein, an effective bactericidal strategy is developed through enhancing the interfacial electric field (IEF) of S-scheme heterojunctions by an ultrasonication-triggered piezoelectric effect. Hollow barium titanate (hBT) nanoparticles (NPs) were prepared through template etching, followed by in situ assembly of tetrakis (4-carboxyphenyl)porphyrin (TCPP) with Zn2+ to obtain hBT@ZnTCPP. Both experimental and theoretical evidences support the notion that an IEF is generared from ZnTCPP to hBT. Compared to metalloporphyrins with Fe3+, Mn3+, Cu2+ and Ni2+, the stronger reduction of ZnTCPP induced by elevation of the orbital energy level of porphyrins after Zn2+ coordination leads to formation of S-scheme heterojunctions. The ultrasonication-activated polarization field enhances IEF and boosts energy band bending of hBT@ZnTCPP to promote electron-hole separations and ROS generations. Planktonic methicillin-resistant Staphylococcus aureus and their derived biofilms are completely destroyed within 5 min under ultrasonication through up-regulating genes of glucose catabolism and ion transportation and down-regulating genes of ribosomal synthesis and transmembrane transporter. Thus, this study demonstrates molecular-level modulation of energy levels for S-scheme heterojunction formation to achieve efficient sonocatalytic therapy of bacterial infections.

Concentrated Solar-Driven Catalytic CO2 Reduction: From Fundamental Research to Practical Applications

Concentrated solar-driven CO2 reduction is a breakthrough approach to combat climate crisis. Harnessing the in-situ coupling of high photon flux density and high thermal energy flow initiates multiple energy conversion pathways, such as photothermal, photoelectric, and thermoelectric processes, thereby enhancing the efficient activation of CO2. This review systematically presents the fundamental principles of concentrated solar systems, the design and classification of solar-concentrating devices, and industrial application case studies. Meanwhile, key technological advances-from theoretical foundations to practical applications-are also discussed. At the microscopic level, a comprehensive analysis of multiscale reaction kinetics within the domain of photothermal synergistic catalysis has been conducted. This analysis elucidates the significance of catalyst design, further detailing the intricate regulatory mechanisms governing reaction pathways and active sites through nanostructured catalysts, single-atom catalysts, and metal-support interactions. However, the transition from laboratory research to industrial-scale application still faces challenges, including the complexity of system integration, energy density optimization, and economic feasibility. This review provides a theoretical framework and practical guidance through a complete investigation of current technological bottlenecks and future development directions, with the aim of driving key advances in concentrated solar-driven CO2 reduction catalysis.

Controlling charge migration and CO2 conversion through surface decoration of 2D-hydrotalcite on bismuth oxybromide for enhanced artificial photosynthesis

Photocatalytic reduction of CO2 in pure H2O media to produce chemicals presents an appealing avenue for simultaneously alleviating energy and environmental crises. However, the rapid recombination of photogenerated charge carriers presents a significant challenge in this promising field. Heterojunction engineering has emerged as an effective approach to address this dilemma. Here, by decorating 2D NiAl-layered double hydroxides (NAL) onto bismuth oxybromide (BOB), we have created a S-scheme heterojunction (N1B1 composite). This catalyst affords CO2-to-CO yields of 102.30 μmol g-1 with a selectivity of 100 %. Ultraviolet photoelectron spectroscopy (UPS) and in-situ irradiated X-ray photoelectron spectroscopy (ISI-XPS) reveal that charge transfer occurs efficiently from BOB to 2D-NAL upon light irradiation. The designed N1B1 heterojunction achieves 7.3-fold and 2.1-fold increase in the internal electric field strength compared to bare 2D-NAL and BOB, respectively, which should be accountable for the improved charge migration. Additionally, pulsed chemisorption and in-situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) show the presence of multiple carbonate intermediates with activated OCO bonds upon N1B1 composite, with *CO2- being identified as the most crucial species for CO production.

Direct Observation of Z-Scheme Route in Cu31S16/ZnxCd1-xS Heteronanoplates for Highly Efficient Photocatalytic Hydrogen Evolution

Although photocatalytic hydrogen production from water holds great potential as a renewable and sustainable energy alternative, the practical application of the technology demands cost-effective, simple photocatalytic systems with high efficiency in hydrogen evolution reaction (HER). Herein, the synthesis and characterization of Cu31S16/ZnxCd1-xS heterostructured nanoplates (Cu31S16/ZnCdS HNPs) as a high photocatalytic system are reported. The cost-effective, hierarchical structures are easily prepared using the Cu31S16 NPs as the seed by the epitaxial growth of the ZnCdS nanocrystals (NCs). The Cu31S16/ZnCdS without the noble metal cocatalyst exhibits a high HER rate of 61.7 mmol g-1 h-1, which is 8,014 and 17 times higher than that of Cu31S16 and ZnCdS, respectively, under visible light irradiation. The apparent quantum yield (AQY) of Cu31S16/ZnCdS reaches 67.9% at 400 nm with the highest value so far in the reported ZnCdS-based photocatalysts. The excellent activity and stability of the Cu31S16/ZnCdS are attributed to the formation of a strong internal electric field (IEF) and the Z-scheme pathway. The comprehensive experiments and theoretical calculations provide the direct evidences of the Z-scheme route. This work may offer a way for the design and development of efficient photocatalysts to achieve solar-to-chemical energy conversion at a practically useful level.

Construction of 2D S-Scheme Heterojunction Photocatalyst

Semiconductor photocatalytic technology holds immense promise for converting sustainable solar energy into chemically storable energy, with significant applications in the realms of energy and the environment. However, the inherent issue of rapid recombination of photogenerated electrons and holes hinders the performance of single photocatalysts. To overcome this challenge, the construction of 2D S-scheme heterojunction photocatalysts emerges as an effective strategy. The deliberate design of dimensionality ensures a substantial interfacial area; while, the S-scheme charge transfer mechanism facilitates efficient charge separation and maximizes redox capabilities. This review commences with a fresh perspective on the charge transfer mechanism in S-scheme heterojunctions, followed by a comprehensive exploration of preparation methods and characterization techniques. Subsequently, the recent advancements in 2D S-scheme heterojunction photocatalysts are summarized. Notably, the mechanism behind activity enhancement is elucidated. Finally, the prospects for the development of 2D S-scheme photocatalysts are presented.

Bi3O4Cl/g-C3N4/Cd0.5Zn0.5S Double Z-Scheme Heterojunction Photocatalyst for Highly Selective CO2 Reduction to Methane

Solar-energy-driven CO2 hydrogenation is a promising strategy to alleviate the climate crisis. Methane is a desirable derivative of CO2 reduction. However, developing a photocatalyst for highly active and selective CH4 generation remains challenging. Herein, we report a double Z-scheme Bi3O4Cl/g-C3N4/Cd0.5Zn0.5S photocatalyst for efficient reduction of CO2 to CH4. In situ characterization techniques confirmed that the charge migration mechanism in Bi3O4Cl/g-C3N4/Cd0.5Zn0.5S promotes charge separation through double internal electric fields. As a result, the optimized C0.01B0.02C catalyst displayed a formation rate high up to 25.34 μmol g-1 h-1 and a selectivity of 96.52% of CH4. Moreover, the AQY of CO2 conversion on C0.01B0.02C (1.84%) was almost 41 times higher than that of the bare CN. This study provides a novel perspective to develop heterojunction photocatalysts for selective CO2 conversion to CH4.

Sulfur defect induced Cd0.3Zn0.7S in-situ anchoring on metal organic framework for enhanced photothermal catalytic CO2 reduction to prepare proportionally adjustable syngas

The rapid recombination of interfacial charges is considered to be the main obstacle limiting the photocatalytic CO2 reduction. Thus, it is a challenge to research an accurate and stable charge transfer control strategy. MIL-53 (Al)-S/Cd0.3Zn0.7S (MAS/CZS-0.3) photocatalysts with chemically bonded interfaces were constructed by in-situ electrostatic assembly of sulfur defect Cd0.3Zn0.7S (CZS-0.3) on the surface of MIL-53 (Al) (MAW), which enhanced interfacial coupling and accelerated electron transfer efficiency. An adjustable proportion of syngas (H2/CO) was prepared by photothermal catalytic CO2 reduction at micro-interface. and the optimal yield of CO (66.10 μmol∙g-1∙h-1) and H2 (71.0 μmol∙g-1∙h-1) was realized by the MAS/CZS-0.3 photocatalyst. The improved activity was due to the photogenerated electrons migrated from CZS-0.3 to the adsorption active sites of MAS, which strengthened the adsorption and activation of CO2 on MAS. The photothermal catalytic CO2 reduction to CO follows the pathway of CO2→*COOH → CO and CO2→*HCO3-→CO. This work provided a reference for the research, characterization, and application of in-situ anchoring of metal organic frameworks in photothermal catalytic CO2 reduction, and provided a green path for the supply of Syngas in industry.

Conductive Polymer-Inorganic Polythiophene/Cd0.5Zn0.5S Heterojunction with Apace Charge Separation and Strong Light Absorption for Boosting Photocatalytic Activity

In order to utilize the synergistic effect between a conductive polymer and an inorganic semiconductor to efficaciously enhance charge transfer and solve the problem of unsatisfactory performance of a single photocatalyst, thiophene (Th) was polymerized on the Cd0.5Zn0.5S nanoparticle surface to prepare a conductive polymer-inorganic polythiophene/Cd0.5Zn0.5S (PTh/CZS) heterostructrue through a simple in situ oxidation polymerization for the first time. The as-prepared PTh/CZS heterostructures significantly improved photocatalytic TCH degradation and hydrogen production activities. Especially, the 15PTh/CZS sample exhibited the optimal hydrogen production rate (18.45 mmol g-1 h-1), which was 2.51 times higher than pure Cd0.5Zn0.5S nanoparticles. In addition, 15PTh/CZS also showed very fast and efficient photodegradation ability for degrading 88% of TCH in 25 min. Moreover, the degradation rate (0.06229 min-1) was five times more than that of Cd0.5Zn0.5S. The π-π* transition characteristics, high optical absorption coefficient, wide absorption wavelength of PTh, the tight contact interface, and synergistic effect of PTh and Cd0.5Zn0.5S efficiently boosted charge transfer rate and increased the light absorption of PTh/CZS photocatalysts, which greatly enhanced the photocatalytic abilities. Besides, the mechanism of improved photocatalytic activities for TCH degradation and H2 production was also carefully proposed. Undoubtedly, this work would provide new insights into coupling conductive polymers to inorganic photocatalysts for achieving multifunctional applications in the field of photocatalysis.