KREP2 Se6 (RE = Sm, Gd, Tb): The First Rare-Earth Selenophosphates with Remarkable Nonlinear Optical Activities Realized by Synergistic Effect of RE- and P-Based Motifs

A Congruent-Melt Infrared Nonlinear Optical Crystal Na4SrAs2S8

A quaternary metal thioarsenate infrared (IR) nonlinear optical (NLO) compound Na4SrAs2S8 was successfully prepared by a high-temperature reaction method from stoichiometric agents. It crystallizes in the tetragonal P4n2 with the unit cell parameters a = 10.0393(3) Å, c = 6.9638(3) Å, and Z = 2, with the basic structural groups of isolated AsS4 tetrahedra. Compared with benchmark IR NLO crystal AgGaS2 (AGS), the title compound exhibits balanced optical properties of large band gap (3.05 eV vs. 2.60 eV) and considerable second harmonic generation response (0.95 × AGS). Moreover, the combined powder X-ray diffraction and differential scanning calorimetry analyses demonstrate that Na4SrAs2S8 is a congruent-melting compound with a low melting point of 668 °C, which is benefical for bulk single crystal growth. Experimental and theoretical calculation results indicate that Na4SrAs2S8 is a practically usable IR NLO crystal, also motivating the exploration of thioarsenates as high-performance IR NLO candidates.

Wide band gap selenide infrared nonlinear optical materials AIIMg6Ga6Se16 with strong SHG responses and high laser-induced damage thresholds

Infrared (IR) nonlinear optical (NLO) materials with strong NLO response, wide band gap and high laser-induced damage threshold (LIDT) are highly expected in current laser technologies. Herein, by introducing double alkaline-earth metal (AEM) atoms, three wide band gap selenide IR NLO materials AIIMg6Ga6Se16 (AII = Ca, Sr, Ba) with excellent linear and NLO optical properties have been rationally designed and fabricated. AIIMg6Ga6Se16 (AII = Ca, Sr, Ba) are composed of unique [AIISe6] triangular prisms, [MgSe6] octahedra and [GaSe4] tetrahedra. The introduction of double AEMs effectively broadens the band gaps of selenide-based IR NLO materials. Among them, CaMg6Ga6Se16, achieving the best balance between the second-harmonic generation response (∼1.5 × AgGaS2), wide band gap (2.71 eV), high LIDT (∼9 × AgGaS2), and moderate birefringence of 0.052 @ 1064 nm, is a promising NLO candidate for high power IR laser. Theoretical calculations indicate that the NLO responses and band gaps among the three compounds are mainly determined by the NLO-active [GaSe4] units. The results enrich the chemical diversity of chalcogenides, and give some insight into the design of new functional materials based on the rare [AIISe6] prismatic units.

Rare-earth-based chalcogenides and their derivatives: an encouraging IR nonlinear optical material candidate

With the continuous development of laser technology and the increasing demand for lasers of different frequencies in the infrared (IR) spectrum, research on infrared nonlinear optical (NLO) crystals has garnered growing attention. Currently, the three main commercially available types of borate materials each have their drawbacks, which limit their applications in various areas. Rare-earth (RE)-based chalcogenide compounds, characterized by the unique f-electron configuration, strong positive charges, and high coordination numbers of RE cations, often exhibit distinctive optical responses. In the field of IR-NLO crystals, they have a research history spanning several decades, with increasing interest. However, there is currently no comprehensive review summarizing and analyzing these promising compounds. In this review, we categorize 85 representative examples out of more than 400 non-centrosymmetric (NCS) compounds into four classes based on the connection of different asymmetric building motifs: (1) RE-based chalcogenides containing tetrahedral motifs; (2) RE-based chalcogenides containing lone-pair-electron motifs; (3) RE-based chalcogenides containing [BS3] and [P2Q6] motifs; and (4) RE-based chalcohalides and oxychalcogenides. We provide detailed discussions on their synthesis methods, structures, optical properties, and structure-performance relationships. Finally, we present several favorable suggestions to further explore RE-based chalcogenide compounds. These suggestions aim to approach these compounds from a new perspective in the field of structural chemistry and potentially uncover hidden treasures within the extensive accumulation of previous research.

Cs3In(In4Se7)(P2Se6): A Multi-Chromophore Chalcogenide with Excellent Nonlinear Optical Property Designed by Group Grafting

Non-centrosymmetric (NCS) and polar materials capable of exhibiting many important functional properties are indispensable for electro-optical technologies, yet their rational structural design remains a significant challenge. Here, we report a "group grafting" strategy for designing the first multi-chromophore selenophosphate, Cs3In(In4Se7)(P2Se6), that crystallizes in a NCS and polar space group of Cm. The structure features a unique basic building unit (BBU) [In(In4Se10)(P2Se6)], formed through "grafting [In4Se10] supertetrahedra on the root of [In(P2Se6)2] groups". Theoretical calculations confirm that this [In(In4Se10)(P2Se6)] BBU can achieve a "1+1>2" combination of properties from two chromophores, [In4Se10] supertetrahedron and ethane-like [P2Se6] dimer. That makes Cs3In(In4Se7)(P2Se6) exhibit excellent linear and nonlinear optical (NLO) properties, including a strong second harmonic generation (SHG) response (~6×AgGaS2), a large band gap (2.45 eV), broad infrared (IR) transmission (up to 19.5 μm), a significant birefringence (0.26 @1064 nm) as well as the congruently-melting property at ~700 °C. Therefore, Cs3In(In4Se7)(P2Se6) will be a promising NLO crystal, especially in the IR region, and this research also demonstrates that "group grafting" will be an effective strategy for constructing novel polar BBUs with multi-chromophore to design NCS structures and high-performance IR NLO materials.

UV-Transparent SHG Material Explored in an Alkali Metal Sulfate Selenite System

The first examples of alkali metal selenite sulfates, namely, Na8(SeO3)(SO4)3 (1), Na2(H2SeO3)(SO4) (2), and K4(H2SeO3)(HSO4)2(SO4) (3), were successfully synthesized by hydrothermal reactions. Their structures display three different zero-dimensional configurations composed of isolated sulfate tetrahedra and selenite groups separated by alkali metals. Na8(SeO3)(SO4)3 (1) features a noncentrosymmetric structure, while Na2(H2SeO3)(SO4) (2) and K4(H2SeO3)(HSO4)2(SO4) (3) are centrosymmetric. Powder second-harmonic-generation measurements revealed that Na8(SeO3)(SO4)3 (1) shows a phase-matchable SHG intensity about 1.2 times that of KDP. UV-vis-NIR diffuse reflectance spectroscopic analysis indicated that Na8(SeO3)(SO4)3 (1) has a short UV cutoff edge and a large optical band gap, which makes it a possible UV nonlinear optical material. Theoretical calculations revealed that the birefringence of Na8(SeO3)(SO4)3 (1) is 0.041 at 532 nm, which is suitable for phase-matching condition. This work provides a good experimental foundation for the exploration of new UV nonlinear crystals in an alkali metal selenite sulfate system.

KREP2S6 (RE = Sm, Gd, Tb, Dy): A Series of Polar Rare-Earth Thiophosphates with High Laser-Induced Damage Thresholds and Moderate Nonlinear-Optical Responses Synergistically Contributed by Isolated P2S6 Units and {[RE2S15]24-}∞ Layers

As one of the potential candidates of nonlinear-optical (NLO) materials, rare-earth chalcophosphates have demonstrated promising properties. Here, KREP2S6 (RE = Sm, Gd, Tb, Dy) were synthesized using the facile RE2O3-B-S solid-state method. They crystallize with a monoclinic chiral P21 structure, and their layer structures are built by isolated ethane-like P2S6 dimers and RES8 bicapped trigonal prisms built {[RE2S15]24-}∞ layers. By comparing the structures with related ones, the change of the alkali metal or RE3+ ions can cause structural transformation. Their band gaps are tunable between 2.58 and 3.79 eV, and their powder samples exhibit good NLO properties. Theoretical calculations suggest that the NLO properties are mainly contributed by P2S6 units and {[RE2S15]24-}∞ layers synergistically, in which {[RE2S15]24-}∞ layers and P2S6 units dominate the contribution to the band gap and second-harmonic-generation response, respectively. This work enriches the application of rare-earth chalcophosphates as NLO materials.

Rational Design of Novel Promising Infrared Nonlinear Optical Materials: Structural Chemistry and Balanced Performances

ConspectusSecond-order nonlinear optical (NLO) materials are currently a hot topic in modern solid-state chemistry and optics because they can produce coherent light by frequency conversion. Noncentrosymmetric (NCS) structure is not only the prerequisite for NLO materials but also a challengeable issue because materials tend to be centrosymmetric (CS) in terms of thermodynamical stability. Among NLO materials, an excellent infrared (IR) candidate should simultaneously meet several strict key conditions including a large NLO coefficient, high laser-induced damage threshold (LIDT), phase-matchable (PM) behavior, and so on. Achieving a balance between the large NLO effect and high LIDT is difficult, as they have contradictory requirements for chemical bonds. Considering the urgent need of the high-power IR laser market and the drawbacks of the available ones, exploring new high-performance IR NLO crystals is necessary while challenging. In this Account, we first briefly introduce the status and advancement of IR NLO crystals and emphasize the criteria of an excellent candidate. Then, we will introduce five simple methods developed by us to discover practical NLO candidates through understanding of the chemical composition-structure-NLO performance relationship. (1) A rarely investigated system with simple chemical compositions as new-type NLO crystals, namely, adducts containing S8 molecules, are developed. Combining a chairlike S8 unit with other units through van der Waals forces has successfully obtained several high-performance NLO adducts. (2) The main trend in exploring new NLO crystals is that the chemical composition is more and more diversified and the structure is more and more complex, and expensive and chemically active alkaline and alkaline earth metals are usually introduced as counter cations. In contrast, the research on systems with simple chemical compositions, simple structures, and low costs has been continuously ignored. The binary M2Q3 (M = Ga, In; Q = S, Se) family with rich acentric modifications has been systematically investigated, and they all exhibit strong SHG effects and high LIDTs. (3) We first proposed the concept of inducing CS structures transformed to NCS ones by partial cation substitution to design novel NLO crystals. Considering the huge number of CS structures in the database compared to the number of NCS structures, it is an attractive method to apply CS structures as the parents to obtain potential NLO materials via partial-substitution-induced symmetry breaking. A series of chalcogenides with high NLO performances have been successfully obtained by us in this way. (4) We investigated the first NLO-active rare earth (RE) chalcophosphates and developed this family systematically, and they demonstrate wonderful comprehensive NLO properties. (5) We created a novel mixed-anion system for NLO applications, namely, chalcogenide borates. Usually, mixed-anion compounds can engender a synergistic effect to obtain desired IR NLO properties. Our recent progress on this system suggests that chalcogenide borates are potential candidates for IR NLO applications, although the study is still in its infancy. Finally, we state the current problems of IR NLO materials and give some perspectives for their future development.

Excellent Nonlinear Optical M[M4 Cl][Ga11 S20 ] (M = A/Ba, A = K, Rb) Achieved by Unusual Cationic Substitution Strategy

The typical chalcopyrite AgGaQ2 (Q = S, Se) are commercial infrared (IR) second-order nonlinear optical (NLO) materials; however, they suffer from unexpected laser-induced damage thresholds (LIDTs) primairy due to their narrow band gaps. Herein, what sets this apart from previously reported chemical substitutions is the utilization of an unusual cationic substitution strategy, represented by [[SZn4 ]S12 + [S4 Zn13 ]S24 + 11ZnS4 ⇒ MS12 + [M4 Cl]S24 + 11GaS4 ], in which the covalent Sx Zny units in the diamond-like sphalerite ZnS are synergistically replaced by cationic Mx Cly units, resulting in two novel salt-inclusion sulfides, M[M4 Cl][Ga11 S20 ] (M = A/Ba, A = K, 1; Rb, 2). As expected, the introduction of mixed cations in the GaS4 anionic frameworks of 1 and 2 leads to wide band gaps (3.04 and 3.01 eV), which exceeds the value of AgGaS2 , facilitating the improvement of high LIDTs (9.4 and 10.3 × AgGaS2 @1.06 µm, respectively). Furthermore, compounds 1 and 2 exhibit moderate second-harmonic generation intensities (0.84 and 0.78 × AgGaS2 @2.9 µm, respectively), mainly originating from the orderly packing tetrahedral GaS4 units. Importantly, this study demonstrates the successful application of the cationic substitution strategy based on diamond-like structures to provide a feasible chemical design insight for constructing high-performance NLO materials.

NaREP2Se6 (RE = Y, Sm, Gd-Dy): Quaternary Rare-Earth Selenophosphates with Unique 3D {[REP2Se6]-}∞ Framework Built by RESe8 and P2Se6 Motifs and Multiple Properties

Rare-earth (RE) chalcophosphates have been widely studied because of their abundant structures. Here, five new RE selenophosphates, NaREP2Se6 (RE = Y, Sm, Gd-Dy), were synthesized by a facile RE oxide-boron-selenium solid-state route. They crystallize in the triclinic P1̅ space group, featuring three-dimensional (3D) structures constructed by RESe8 and P2Se6 motifs, different from common 2D RE chalcophosphates A-RE-P2-Q6 (A = alkali metal; Q = S, Se) system. Their structural chemistry and relationship with related phases are analyzed. Both the size of A and the coordination geometry of RE have important influences on the system's structures. Their optical band gaps are tunable from 1.79 to 2.50 eV, and they exhibit diverse magnetic behaviors, including Van-Vleck-type paramagnetism, antiferromagnetism, and ferromagnetism. Their photocurrent responses and thermal stabilities are analyzed as well. Calculation results suggest that the RESe8 and P2Se6 units make a great contribution to the optical properties. This work enriches the chemistry and multifunctional properties of RE chalcophosphates.