Boosting Electrochemical Catalysis and Nonenzymatic Sensing Toward Glucose by Single-Atom Pt Supported on Cu@CuO Core-Shell Nanowires

Materials Containing Single-, Di-, Tri-, and Multi-Metal Atoms Bonded to C, N, S, P, B, and O Species as Advanced Catalysts for Energy, Sensor, and Biomedical Applications

Modifying the coordination or local environments of single-, di-, tri-, and multi-metal atom (SMA/DMA/TMA/MMA)-based materials is one of the best strategies for increasing the catalytic activities, selectivity, and long-term durability of these materials. Advanced sheet materials supported by metal atom-based materials have become a critical topic in the fields of renewable energy conversion systems, storage devices, sensors, and biomedicine owing to the maximum atom utilization efficiency, precisely located metal centers, specific electron configurations, unique reactivity, and precise chemical tunability. Several sheet materials offer excellent support for metal atom-based materials and are attractive for applications in energy, sensors, and medical research, such as in oxygen reduction, oxygen production, hydrogen generation, fuel production, selective chemical detection, and enzymatic reactions. The strong metal-metal and metal-carbon with metal-heteroatom (i.e., N, S, P, B, and O) bonds stabilize and optimize the electronic structures of the metal atoms due to strong interfacial interactions, yielding excellent catalytic activities. These materials provide excellent models for understanding the fundamental problems with multistep chemical reactions. This review summarizes the substrate structure-activity relationship of metal atom-based materials with different active sites based on experimental and theoretical data. Additionally, the new synthesis procedures, physicochemical characterizations, and energy and biomedical applications are discussed. Finally, the remaining challenges in developing efficient SMA/DMA/TMA/MMA-based materials are presented.

Advanced nanomaterials for electrochemical sensors: application in wearable tear glucose sensing technology

In the last few decades, tear-based biosensors for continuous glucose monitoring (CGM) have provided new avenues for the diagnosis of diabetes. The tear CGMs constructed from nanomaterials have been extensively demonstrated by various research activities in this field and are gradually witnessing their most prosperous period. A timely and comprehensive review of the development of tear CGMs in a compartmentalized manner from a nanomaterials perspective would greatly broaden this area of research. However, to our knowledge, there is a lack of specialized reviews and comprehensive cohesive reports in this area. First, this paper describes the principles and development of electrochemical glucose sensors. Then, a comprehensive summary of various advanced nanomaterials recently reported for potential applications and construction strategies in tear CGMs is presented in a compartmentalized manner, focusing on sensing properties. Finally, the challenges, strategies, and perspectives used to design tear CGM materials are emphasized, providing valuable insights and guidance for the construction of tear CGMs from nanomaterials in the future.

Advances of Transition Metal-Based Electrochemical Non-enzymatic Glucose Sensors for Glucose Analysis: A Review

Glucose concentration is a crucial parameter for assessing human health. Over recent years, non-enzymatic electrochemical glucose sensors have drawn considerable attention due to their substantial progress. This review explores the common mechanism behind the transition metal-based electrocatalytic oxidation of glucose molecules through classical electrocatalytic frameworks like the Pletcher model and the Hydrous Oxide-Adatom Mediator model (IHOAM), as well as the redox reactions at the transition metal centers. It further compiles the electrochemical characterization techniques, associated formulas, and their ensuing conclusions pertinent to transition metal-based non-enzymatic electrochemical glucose sensors. Subsequently, the review covers the latest advancements in the field of transition metal-based active materials and support materials used in non-enzymatic electrochemical glucose sensors in the last decade (2014-2023). Additionally, it presents a comprehensive classification of representative studies according to the active metal catalysts components involved.

One-step solvent thermal synthesis of 3D networked MOF composites for preparation of an ultrasensitive chemosensor for hydroquinone and catechol

Pharmaceuticals and personal care products (PPCPs) have a significant impact on the environment and human health, due to their sometimes toxic and carcinogenic characteristics. Therefore, an innovative chemosensor was constructed for ultrasensitive determination of two typical PCCPs (hydroquinone (HQ) and catechol (CC)) in several minutes. The homemade chemosensor (UiO-67@GO/MWCNTs) consisted of MOF(UiO-67), graphene oxide (GO), and multi-walled carbon nanotubes (MWCNTs) composites; it was a networked, structurally sparse, porosity-rich, homogeneous octahedral composite, and had ultra-high electrical conductivity, which provided lots of active adsorption sites, promote charge transfer, and enrich lots of molecules to be measured in a few minutes. The prepared electrochemical sensor showed good long-term stability, applicability, reproducibility, and immunity to interference for the determination of HQ and CC, with a wide linear range of response of 5.0 ~ 940 µM for both HQ and CC, and a low limit of detection with satisfactory recoveries. In addition, a new strategy of using MOF composites as the basis for electrochemical determination of organic small molecules was established, and a new platform was constructed for the quantitative determination of organic small molecules in various environmental samples.

Tailoring the d-band center on Ru1Cu single-atom alloy nanotubes for boosting electrochemical non-enzymatic glucose sensing

The development of cost-effective and highly efficient electrocatalysts is critical to help electrochemical non-enzymatic sensors achieve high performance. Here, a new class of catalyst, Ru single atoms confined on Cu nanotubes as a single-atom alloy (Ru1Cu NTs), with a unique electronic structure and property, was developed to construct a novel electrochemical non-enzymatic glucose sensor for the first time. The Ru1Cu NTs with a diameter of about 24.0 nm showed a much lower oxidation potential (0.38 V) and 9.0-fold higher response (66.5 μA) current than Cu nanowires (Cu NWs, oxidation potential 0.47 V and current 7.4 μA) for glucose electrocatalysis. Moreover, as an electrochemical non-enzymatic glucose sensor, Ru1Cu NTs not only exhibited twofold higher sensitivity (54.9 μA mM-1 cm-2) and wider linear range (0.5-8 mM) than Cu NWs, but also showed a low detection limit (5.0 μM), excellent selectivity, and great stability. According to theoretical calculation results, the outstanding catalytic and sensing performance of Ru1Cu NTs could be ascribed to the upshift of the d-band center that helped promote glucose adsorption. This work presents a new avenue for developing highly active catalysts for electrochemical non-enzymatic sensors.

Fe Single-Atom Carbon Dots Nanozyme Collaborated with Nucleic Acid Exonuclease III-Driven DNA Walker Cascade Amplification Strategy for Circulating Tumor DNA Detection

Circulating tumor DNA (ctDNA), as a next-generation tumor marker, enables early screening and monitoring of cancer through noninvasive testing. Exploring the development of new methods for ctDNA detection is an intriguing study. In this work, a unique electrochemical biosensor for the ctDNA detector was constructed in the first utilizing Fe single-atom nanozymes-carbon dots (SA Fe-CDs) as a signaling carrier in collaboration with a DNA walker cascade amplification strategy triggered by nucleic acid exonuclease III (Exo III). The electrochemical active surface area of AuNPs/rGO modified onto a glassy carbon electrode (AuNPs/rGO/GCE) was about 1.43 times that of a bare electrode (bare GCE), with good electrical conductivity alongside a high heterogeneous electron transfer rate (5.81 × 10-3 cm s-1), that is, as well as the ability to load more molecules. Sequentially, the DNA walker cascade amplification strategy driven by Exo III effectively converted the target ctDNA into an amplified biosignal, ensuring the sensitivity and specificity of ctDNA. Ultimately, the electrochemical signal was further amplified by introducing SA Fe-CDs nanozymes, which could serve as catalysts for 3,3',5,5'-tetramethylbenzidine (TMB) oxidation with facile responding (Vmax = 0.854 × 10-6 M s-1) and robust annexation (Km = 0.0069 mM). The integration of the triple signal amplification approach achieved detection limits as low as 1.26 aM (S/N = 3) for a linearity spanning from 5 aM to 50 nM. In this regard, our proposal for a biosensor with exceptional assay properties in complicated serum environments had great potential for early and timely diagnosis of cancer.

Synthesis of unique three-dimensional CoMn2O4@Ni(OH)2 nanocages via Kirkendall effect for non-enzymatic glucose sensing

Transition metal oxides / hydroxides, which have the advantages of wide distribution, low price, low toxicity, and stable chemical properties, have attracted much attention from researchers. Therefore, this work reports the construction of the unique CoMn2O4 nanocages assisted by the Kirkendall effect, and worm-like Ni(OH)2 nanoparticles were grown on the surface via hydrothermal method, the final product CoMn2O4@Ni(OH)2 nanocages were applied to construct efficient and sensitive non-enzymatic glucose electrochemical sensing. The stable three-dimensional hollow CoMn2O4 nanocages structure, not only can provide a wider specific surface area and more abundant active sites, its porous structure also can effectively inhibit the aggregation of nanoparticles, increase the ion diffusion path, shorten the electron transport distance, and improve the electrical conductivity. Loading Ni(OH)2 nanoparticles on the CoMn2O4 nanocages can increase catalytic sites, and further strengthen the electrocatalytic performance. Due to the good synergistic effect between CoMn2O4 and Ni(OH)2, CoMn2O4@Ni(OH)2 nanocages electrochemical sensor can achieve sensitive and rapid detection of trace glucose, with excellent linear range (8.5-1830.5 μM), low limit of detection (0.264 μM), high sensitivity of 0.00646 μA mM-1 cm-2, and outstanding repeatability. More importantly, the sensor has been successfully applied to the determination of blood glucose in human serum with good recoveries (95.64-104.3 %). This work provides a novel scheme for blood glucose detection and expands the application of transition metal oxides / hydroxides in the field of electrochemical sensing.

Machine Learning-Assisted Automatically Electrochemical Addressable Cytosensing Arrays for Anticancer Drug Screening

The high-throughput and accurate screening of anticancer drugs is crucial to the preclinical assessment of candidate drugs and remains challenging. Herein, an automatically electrochemical addressable cytosensor (AEAC) for the efficient screening of anticancer drugs is reported. This sensor consists of sectionalized laser-induced graphene arrays decorated by the rhombohedral TiO2 and spherical Pt nanoparticles (LIG-TiO2-Pt) with high electrocatalytic activity for H2O2 and a homemade Ag/Pt electrode couple fixed onto the robot arm. The immobilization of laminin on the surface of LIG-TiO2-Pt can promote its biocompatibility for the growth and proliferation of various tumor cells, which empowers the in situ monitoring of H2O2 directly released from these live cells for drug screening. A machine learning (ML) algorithm is employed to eliminate the possible random or systematic errors of AEAC, realizing rapid, high-throughput, and accurate prediction of different types of anticancer drugs. This ML-assisted AEAC provides a powerful approach to accelerate the evolution of sensing-served tumor therapy.

Glucose and UA sensing based on Cu nanoparticle decorated Nif/GO flexible electrode

A novel, green, and facile approach has been developed to construct an ultrasensitive flexible enzyme-less electrochemical sensor on the basis of chitosan and graphene oxide composites decorated with Cu nanoparticles supported on nickel foam (Nif/Cs/GO@Cu), in which GO functions as the intermediate between Nif and Cu nanoparticles. The Nif/Cs/GO@Cu sensing platform was successfully fabricated by the drop casting method to load Cs/GO onto Nif followed by an additionally electrodeposition to support Cu nanoparticles on Nif/Cs/GO. Impressively, the Nif/Cs/GO@Cu exhibited much higher electrocatalytic activity for glucose and UA oxidation as compared to that of Nif or Nif@Cu. For glucose and UA at about 0.6 V and 0.1 V (vs. Ag/AgCl), linearity could be obtained in the concentration ranges 5 µM-4 mM and 5-345 µM; the sensitivities were 16 and 2.5 µA µM-1 cm-2, and the detection limits 83 nM and 0.3 µM, respectively. The improved performance of the composite electrode was ascribed to the synergistic effect of Cu nanoparticles, Nif and GO, in which GO provides high electron conductivity and large surface area to prevent the agglomeration of Cu nanoparticles; Cu nanoparticles and Nif offer abundant active sites towards analytes oxidation. Additionally, the method was applied to determine both analytes successfully in blood serum samples with excellent recovery and also opens up an attractive route to potential applications of the flexible nickel foam-based electrochemical sensor.

Anchoring Pt Particles onto Mesoporousized ZnO Holey Cubes for Triethylamine Detection with Multifaceted Superiorities

Designing sensing materials with integrating unique spatial structures, functional units, and surface activity is vital to achieve high-performance gas sensor toward triethylamine (TEA) detection. Herein, a simple spontaneous dissolution is used with subsequent thermal decomposition strategy to fabricate mesoporousized ZnO holey cubes. The squaric acid is crucial to coordinate Zn2+ to form a cubic shape (ZnO-0) and then tailor the inner part to open a holey cube with simultaneously mesoporousizing the left cubic body (ZnO-72). To enhance the sensing performance, the mesoporous ZnO holey cubes have been functionalized with catalytic Pt nanoparticles, which deliver superior performances including high response, low detection limit, and fast response and recovery time. Notably, the response of Pt/ZnO-72 towards 200 ppm TEA is up to 535, which is much higher than those of 43 and 224 for pristine ZnO-0 and ZnO-72. A synergistic mechanism combining the intrinsic merits of ZnO, its unique mesoporous holey cubic structure, the oxygen vacancies, and the catalytic sensitization effect of Pt has been proposed for the significant enhancement in TEA sensing. Our work provides an effective facile approach to fabricate an advanced micro-nano architecture with manipulating its spatial structure, functional units, and active mesoporous surface for promising TEA gas sensors.