Utilizing Metal-Thiocatecholate Functionalized UiO-66 Framework for Photocatalytic Hydrogen Evolution Reaction

2D metal-organic frameworks bearing butterfly-shaped metal-bis(dithiolene) linkers from dithiol-functionalized benzenedicarboxylic acid

An assembly between 1,4-dicarboxylbenzene-2,3-dithiol (H2dcbdt) and different transition metal ions successfully produced 2D metal-organic frameworks (M-dcbdt, M = Ni, Co or Fe) composed of unprecedented butterfly-shaped metal-bis(dithiolene) (MS4) linkers in one-pot fashion. Such strategy provides easier access to the [MS4]-rich network and lowers the prerequisite to explore their applications.

Selective oxidation of β-keto ester modulated by the d-band centers in D-A conjugated microporous metallaphotoredox catalysts containing M-salen (MZn, Cu and Co) and triazine monomers

Photocatalytic selective oxidation plays an important role in developing green chemistry. However, it is challenging to design an efficient photocatalyst for controlling the selectivity of photocatalytic oxidation reaction and exploring its detailed mechanism. Here, we synthesized three conjugated microporous polymers (CMPs) with D-A structures, named M-SATE-CMPs (MZn, Cu and Co), with different d-band centers based on different metal centers, resulting in the discrepancy in adsorption and activation capacities for the reactants, which produces the selectivity of β-keto esters being catalyzed into α-hydroperoxide β-keto esters (ROOH) or to α-hydroxyl β-keto esters (ROH). Density functional theory (DFT) calculations also demonstrate that the adsorption and activation capacities of the metal active centers in M-SATE-CMPs (MZn, Cu and Co) for ROOH are the key factors to influence the photocatalytic selective oxidation of β-keto ester. This study provides a promising strategy for designing a metallaphotoredox catalyst whose photocatalytic selectivity depends on the d-band center of metal site in the catalyst.

Cysteamine-Anchored MOF through Post-Synthetic Modification Strategy for the Effective Removal of Mercury from Water

The introduction of cysteamine functionality, referred to as Q-ZIF-67-SH, was successfully achieved through postsynthetic modification while maintaining the structural and thermal stability of the quasi metal-organic framework Q-ZIF-67. By subjecting ZIF-67 to controlled partial deligandation at 310 °C under an air atmosphere, a substantial number of unsaturated cobalt sites were generated within the quasi ZIF-67 (Q-ZIF-67) structure. These unsaturated cobalt sites facilitated effective coordination with cysteamine, resulting in the development of the thiol-functionalized framework Q-ZIF-67-SH. The potential of these metal-organic frameworks (MOFs) for the adsorptive removal of hazardous Hg(II) was investigated. Various factors, such as the type of sorbent, pH, adsorbent dosage, initial concentration of Hg(II), and presence of coexisting ions, were thoroughly examined and comprehensively explained. Thiol-anchored MOF significantly enhanced the efficiency of Hg(II) removal, achieving an impressive removal rate of up to 99.2%. Furthermore, it demonstrated a maximum adsorption capacity of 994 mg g-1 and a distribution coefficient of 2.5 × 106 mL g-1. A good correspondence with pseudo-second-order kinetics and the Langmuir model was observed through the fitting of adsorption kinetics and the isotherm model. The thermodynamic data strongly indicate that the adsorptive removal of Hg(II) is characterized by endothermicity and spontaneity. This signifies that the process is energetically favorable and has potential for efficient Hg(II) removal. Therefore, the Q-ZIF-67-SH sorbent emerges as a promising and advantageous option for the removal of Hg(II) from water.

Metalation of metal-organic frameworks: fundamentals and applications

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

Rational synthesis of two isostructural thiophene-containing metal-organic frameworks toward photocatalytic degradation of organic pollutants

In this work, thiophene moieties (as the crucial functional groups) have been successfully incorporated into the skeleton of metal-organic frameworks (MOFs) by using thienyl-substituted triazole ligands. Reaction of AgCF3SO3 with 3-phenyl-5-(2-thienyl)-1,2,4-triazole (PTTzH) or 3,5-bis(2-thienyl)-1,2,4-triazole (BTTzH) afforded two isostructural MOFs (AgTz-3 and AgTz-4) in gram-scale. AgTz-4 with higher thiophene content showed significantly stronger photocatalytic activity than AgTz-3 with lower thiophene content. Noteworthy, the photodegradation rate constants of AgTz-4 were 0.055 mg·L-1·min-1 for rhodamine B and 0.24 min-1 for salazosulfapyridine, which is comparable or even higher than some MOF-based materials reported in the literature. More importantly, AgTz-4 demonstrated good reusability and stability after four cycles of photodegradation. Our experimental results revealed that the enhanced photodegradation efficiency can be attributed to the increased light absorption capacity and optimized band structure of Ag-MOFs resulting from the introduction of thiophene groups into MOF structures.

Highly porous BiOBr@NU-1000 Z-scheme heterojunctions for synergistic efficient adsorption and photocatalytic degradation of tetracycline

Designing an effective photoactive heterojunction having dual benefits towards photoenergy conversion and pollutant adsorption is regarded as an affordable, green method for eliminating tetracycline (TC) from wastewater. In this regard, a series of BiOBr@NU-1000 (BNU-X, X = 1, 2 and 3) heterojunction photocatalysts are constructed. BNU-X preserves the original skeleton structure of the parent NU-1000, and its high porosity and specific surface area enable superior TC adsorption. At the same time, BNU-X is an effective Z-scheme photocatalyst that improves light trapping, promotes photoelectron-hole separation, and shows excellent photocatalytic degradation efficiency towards TC with the value of the photodegradation kinetic rate constant k being 2.2 and 24.8 times those of NU-1000 and BiOBr, respectively. The significant increase in the photocatalytic activity is ascribed to the construction of an efficient Z-scheme photocatalyst, which promotes the formation of superoxide radicals (˙O2-) and singlet oxygen (1O2) as the main oxidative species in the oxidation system. This research has the advantage of possibilities for the development of porous Z-scheme photocatalysts based on photoactive MOF materials and inorganic semiconductors for the self-purification and photodegradation of organic contaminants.

Thiol and thioether-based metal-organic frameworks: synthesis, structure, and multifaceted applications

Metal-organic frameworks (MOFs) are unique hybrid porous materials formed by combining metal ions or clusters with organic ligands. Thiol and thioether-based MOFs belong to a specific category of MOFs where one or many thiols or thioether groups are present in organic linkers. Depending on the linkers, thiol-thioether MOFs can be divided into three categories: (i) MOFs where both thiol or thioether groups are part of the carboxylic acid ligands, (ii) MOFs where only thiol or thioether groups are present in the organic linker, and (iii) MOFs where both thiol or thioether groups are part of azolate-containing linkers. MOFs containing thiol-thioether-based acid ligands are synthesized through two primary approaches; one is by utilizing thiol and thioether-based carboxylic acid ligands where the bonding pattern of ligands with metal ions plays a vital role in MOF formation (HSAB principle). MOFs synthesized by this approach can be structurally differentiated into two categories: structures without common structural motifs and structures with common structural motifs (related to UiO-66, UiO-67, UiO-68, MIL-53, NU-1100, etc.). The second approach to synthesize thiol and thioether-based MOFs is indirect methods, where thiol or thioether functionality is introduced in MOFs by techniques like post-synthetic modifications (PSM), post-synthetic exchange (PSE) and by forming composite materials. Generally, MOFs containing only thiol-thioether-based ligands are synthesized by interfacial assisted synthesis, forming two-dimensional sheet frameworks, and show significantly high conductivity. A limited study has been done on MOFs containing thiol-thioether-based azolate ligands where both nitrogen- and sulfur-containing functionality are present in the MOF frameworks. These materials exhibit intriguing properties stemming from the interplay between metal centres, organic ligands, and sulfur functionality. As a result, they offer great potential for multifaceted applications, ranging from catalysis, sensing, and conductivity, to adsorption. This perspective is organised through an introduction, schematic representations, and tabular data of the reported thiol and thioether MOFs and concluded with future directions.

GSH-depleting metal-polyphenol-network nanoparticles with dual enzyme activities induce enhanced ferroptosis

Ferroptosis is a non-apoptotic form of regulated cell death. The efficiency of ferroptosis is restrained in the tumor microenvironment (TME) by overexpression of glutathione (GSH) and insufficient production of hydrogen peroxide (H2O2). In this work, theranostic nanoparticles Ce-aMOFs@Fe3+-EGCG, termed MEFs, are developed by coating uniform Ce-based amorphous metal-organic frameworks (Ce-aMOFs) with epigallocatechin gallate (EGCG) and Fe3+. Fe3+ is chelated by the adjacent phenol hydroxyl groups in EGCG. In the tumor cell interior, overexpressed GSH and weak acidic medium degrade the coating to release Fe3+ and EGCG accompanied by exposure of Ce-aMOFs. Fe3+ and EGCG consume GSH along with turning Fe3+ into Fe2+. Ce-aMOFs act as a nanozyme possessing dual-enzymatic activities, i.e. superoxide dismutase (SOD)- and phosphatase-like activities. In the TME, Ce-aMOFs catalyze the conversion of endogenous superoxide (O2˙-) into H2O2, and Fe2+ catalyzes H2O2 to generate toxic hydroxyl radicals (˙OH), which may further induce tumor cell death through ferroptosis. In addition, the phosphatase-like activity of Ce-aMOFs may sustainably dephosphorylate NADPH and effectively inhibit intracellular biosynthesis of GSH. Therefore, MEFs ensure down-regulation of intracellular GSH levels and up-regulation of oxidative pressure, which enhance the ferroptosis effect.