Construction of Cu7 S4 @CuCo2 O4 Yolk-Shell Microspheres Composite and Elucidation of Its Enhanced Photocatalytic Activity, Mechanism, and Pathway for Carbamazepine Degradation

Construction of Ternary Zn0.5Cu0.5Co2O4 Spinel Structure on Nickel Foam: A Comprehensive Theoretical and Experimental Study from Single to Ternary Metal Oxides for High-Energy-Density Asymmetric Supercapacitor Application

Developing nanostructured multi-transition metal-based spinel architectures represents a strategic approach for boosting the energy density of supercapacitors while preserving high power density. Here, the influence of incorporating Zn and Cu into Co3O4 spinel systems on supercapacitor performance is investigated by synthesizing single (ZnO, CuO, Co3O4), binary (ZnCo2O4, CuCo2O4), and ternary (Zn0.5Cu0.5Co2O4) oxides on nickel foam substrates. Theoretical and experimental analyses highlight that the flower-like structures of Zn0.5Cu0.5Co2O4, comprising nanowires and nanoribbons, effectively reduced transport barriers and enhanced ion adsorption, thereby improving electron/ion reaction kinetics. Oxygen vacancies induced defect states in Zn0.5Cu0.5Co2O4, shifting the d- and p-band center values closer to the Fermi level and enhancing electrochemical performance. The Zn0.5Cu0.5Co2O4 exhibits a specific capacity of 271 mA h g-1 (1776 F g-1) at 1 A g-1 with 97% capacity retention after 5 000 charge/discharge cycles. In a Zn0.5Cu0.5Co2O4//activated carbon configuration, the device demonstrates superior energy and power densities of 122.2 Wh kg-1 and 800 W kg-1, respectively, maintaining 91% capacitance after 10 000 cycles at 30 A g-1 with high coulombic efficiency. This study presents an effective strategy to enhance ion/charge transfer and adsorption in multi-transition metal spinel architectures, advancing the development of supercapacitor electrodes.

Efficient photodegradation of carbamazepine by organocatalysts incorporating a third component with a more complementary absorption spectrum

Carbamazepine, recognized as one of the most prevalent pharmaceuticals, has attracted considerable attention due to its potential impact on ecosystems and human health. In response, this work synthesized and characterized a novel environmentally friendly and cost-effective organic semiconductor photocatalyst PM6:Y6:ITCPTC loaded with coconut shell charcoal, and then investigated its performance for photocatalytic removal. Remarkably, carbamazepine demonstrated a photodegradation efficiency exceeding 99% within a mere 20 minutes of exposure to one sunlight intensity, and also showed good effectiveness under a low light intensity of 50 W. The catalyst exhibited exceptional reusability and stability, maintaining degradation efficiency between 95-99% over 25 cycles. The high photocatalytic activity of PM6:Y6:ITCPTC is primarily attributed to the incorporation of the third component (named ITCPTC), which enhances exciton dissociation and carrier transfer, generating superoxide radicals, electrons, and holes. Furthermore, the plausible degradation pathway of carbamazepine was proposed based on the measured intermediates and density functional theory calculations.

Construction of the Z-Scheme Heterogeneous HKUST-1/BiVO4 Nanorod Composite for Enhanced Piezo-Photocatalytic Reduction Performance of Cr(VI)

In recent years, piezo-photocatalysis has become a promising strategy for solving environmental pollution problems by adding additional mechanical energy to the photocatalysis process. This work reported the effective synthesis of a variety of HKUST-1/BiVO4 heterogeneous materials by combining monoclinic BiVO4 and porous HKUST-1 semiconductors. The piezo-photocatalytic properties of HKUST-1/BiVO4 were studied by the reduction of hexavalent chromium (Cr(VI)) under visible-light irradiation and ultrasonic waves. In the piezo-photocatalysis process, the best reduction rates among as-prepared HKUST-1/BiVO4 composites were up to 96.20% of 10 ppm Cr(VI) solution, which was approximately 1.80 times that under visible light and about 4.13 times that under ultrasound. Under the action of the piezoelectric potential, the availability of free radicals increased the reduction rate of Cr(VI) and reached a synergistic effect of 1.14-fold.

Poly-vinyl-pyrrolidone capped luminescent zinc oxide nanocomposites as excellent tools for germicidal and photo-catalytic performances

Alternate antibiotics developed through the involvement of nanomaterials are gaining interest due to their economical and lower toxicity concerns. A newly developed biopolymer-based polyvinylpyrrolidone/zinc oxide (PVP/ZnO) nanocomposite (NCs) was efficiently synthesized by an environment-friendly approach, utilizing onion and garlic peel extract as a bio-surfactant, zinc acetate as the source, PVP as the stabilizing agent, and sodium hydroxide as the precipitant. Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) investigations verified the crystalline properties of ZnO, PVP, and PVP/ZnO-based NCs. The structure of the biopolymer-linked ZnO particles interpolated inside the PVP array was seen to have a layered and flaky structure, as validated by field emission scanning electron microscopy (FE-SEM) analysis, which revealed its occurrence in the nanometer range. The XRD examination verified that the surface topographical image of PVP/ZnO NCs had an average thickness of 21 nm. The PVP/ZnO nanocrystals demonstrated exceptional photocatalytic efficacy, with a breakdown rate of 88% and almost 92% for the methylene blue dye. Therefore, the PVP/ZnO matrix exhibits superior antibacterial activity compared to other extracts, resulting in greater microbial suppression. The results above indicate that the ZnO-intercalated PVP array has a stronger reinforcing effect than other components. Hence, PVP/ZnO nanocrystals exhibit enormous potential as a favorable substance for environmental and biomedical intentions.

Photocatalytic activity and mechanism of YMnO3/NiO photocatalyst for the degradation of oil and gas field wastewater

One-step hydrothermal method has been used to synthesize YMnO3@NiO (YMO@NO) photocatalysts with high photocatalytic activity for the degradation of oil and gas field wastewater under simulated solar irradiation. Through various characterization methods, it has been confirmed that the YMO@NO photocatalyst comprises only YMO and NO, without any other impurities. The microstructure characterization confirmed that the YMO@NO photocatalyst was composed of large squares and fine particles, and heterojunction was formed at the interface of YMO and NO. The optical properties confirm that the YMO@NO photocatalyst has high UV-vis optical absorption coefficient, suggesting that it has high UV-vis photocatalytic activity. Taking oil and gas field wastewater as degradation object, YMO@NO photocatalyst showed the highest photocatalytic activity (98%) when the catalyst content was 1.5 g/L, the mass percentage of NO was 3%, and the irradiation time was 60 min. Capture and stability experiments confirm that the YMO@NO photocatalyst is recyclable and electrons, holes, hydroxyl radicals and superoxide radicals play major roles in the photocatalysis process. Based on experiments and theoretical calculations, a reasonable photocatalytic mechanism of the YMO@NO photocatalyst is proposed.

In Situ Interfacial Engineering of CeO2/Bi2WO6 Heterojunction with Improved Photodegradation of Tetracycline and Organic Dyes: Mechanism Insight and Toxicity Assessment

The construction of heterojunction photocatalysts is an auspicious approach for enhancing the photocatalytic performance of wastewater treatment. Here, a novel CeO2/Bi2WO6 heterojunction is synthesized using an in situ liquid-phase method. The optimal 15% CeO2/Bi2WO6 (CBW-15) is found to have the highest photocatalytic activity, achieving a degradation efficiency of 99.21% for tetracycline (TC), 98.43% for Rhodamine B (RhB), and 94.03% for methylene blue (MB). The TC removal rate remained at 95.38% even after five cycles. Through active species capture experiments, •O2 -, h+, and •OH are the main active substances for TC, RhB, and MB, respectively. The possible degradation pathways for TC are analyzed using liquid chromatography-mass spectrometry (LC-MS). The photoinduced charge transfer and possible degradation mechanisms are proposed through experimentation and density functional theory (DFT) calculations. Toxicity assessment experiments show a significant reduction in toxicity during the TC degradation process. This study uncovers the mechanism of photocatalytic degradation in CeO2/Bi2WO6 and provides new insights into toxicity assessment.

Interface engineering in a nitrogen-rich COF/BiOBr S-scheme heterojunction triggering efficient photocatalytic degradation of tetracycline antibiotics

Tetracycline (TC) antibiotics, extensively utilized in livestock farming and aquaculture, pose significant environmental challenges. Photocatalysis, leveraging renewable sunlight and reusable photocatalysts, offers a promising avenue for mitigating TC pollution. However, identifying robust photocatalysts remains a formidable challenge. This study introduces a novel hollow-flower-ball-like nanoheterojunction composed of a nitrogen-rich covalent organic framework (N-COF) coupled with BiOBr (BOB), a semiconductor with a higher Fermi level. The synthesized N-COF/BOB S-scheme nanoheterojunction features an expanded contact interface, strengthened chemical bonding, and unique band topologies. The N-COF/BOB composites showcased exceptional TC degradation performance, achieving an 81.2% removal of 60 mg/L TC within 2 h, markedly surpassing the individual efficiencies of N-COF and BOB by factors of 3.80 and 5.96, respectively. Furthermore, the total organic carbon (TOC) removal efficiency highlights a superior mineralization capacity in the N-COF/BOB composite compared to the individual components, N-COF and BOB. The toxicity assessment revealed that the degradation intermediates possess diminished environmental toxicity. This enhanced performance is ascribed to the robust S-scheme nanoheterojunction structure, which promotes efficient photoinduced electron transfer from BOB to N-COF. This process also augments the separation of photogenerated charge carriers, resulting in an increased yield of superoxide radicals (∙O2-) and hydroxyl radicals (∙OH). These reactive species significantly contribute to the degradation and mineralization of TC. Consequently, this study introduces a sustainable approach for addressing emerging antibiotic contaminants, employing COF-based photocatalysts.

Simultaneous Photocatalytic Tetracycline Oxidation and Cr(VI) Reduction by Z-Scheme Multiple Layer TiO2/SnIn4S8

Wastewater pollutants are a major threat to natural resources, with antibiotics and heavy metals being common water contaminants. By harnessing clean, renewable solar energy, photocatalysis facilitates the synergistic removal of heavy metals and antibiotics. In this paper, MXene was both a template and raw material, and MXene-derived oxide (TiO2) and SnIn4S8 Z-scheme composite materials were synthesized and characterized. The synergistic mode of photocatalytic reduction and oxidation leads to the enhanced utilization of e-/h+ pairs. The TiO2/SnIn4S8 exhibited a higher photocatalytic capacity for the simultaneous removal of tetracycline (TC) (20 mg·L-1) and Cr(VI) (15 mg·L-1). The main active substances of TC degradation and Cr(VI) reduction were identified via free radical scavengers and electron paramagnetic resonance (EPR). Additionally, the potential photocatalytic degradation route of TC was thoroughly elucidated through liquid chromatography-mass spectrometry (LC-MS).

Constructing a Titanium Silicon Molecular Sieve-Based Z-Scheme Heterojunction with Enhanced Photocatalytic Activity

Titanium silicon molecular sieve (TS-1) is an oxidation catalyst that possesses a long lifetime of charge transfer excited state, high Ti utilization efficiency, large specific surface area, and good adsorption property; therefore, TS-1 acts as a Ti-based photocatalyst candidate. In this work, TS-1 coupled Bi2MoO6 (TS-1/BMO) photocatalysts were fabricated via a facile hydrothermal route. Interestingly, the optimized TS-1/BMO-1.0 catalyst exhibited a decent photodegradation property toward tetracycline hydrochloride (85.49% in 120 min) under the irradiation of full spectrum light, which were 4.38 and 1.76 times compared to TS-1 and BMO, respectively. The enhanced photodegradation property of the TS-1/BMO-1.0 catalyst could be attributed to the reinforced light-harvesting capacity of the photocatalyst, high charge mobility, and suitable band structure for tetracycline hydrochloride degradation. In addition, the mechanism of photocatalytic degradation of tetracycline hydrochloride by the TS-1/BMO-1.0 catalyst was reasonably proposed based on the band structure, trapping, and ESR tests. This research provided feasible ideas for the design and construction of high-efficiency photocatalysts for contaminant degradation.

One-pot synthesis of interfacially bonded Bi4O5Br2/Bi2S3 Z-scheme heterostructures with boosted photocatalysis towards dodecylbenzenesulfonate and real hotel laundry wastewater

The ubiquitous contamination of surfactants in wastewater has raised global concerns. Photocatalysis is deemed as a promising yet challenging approach for the decomposition of surfactant residues. Herein, a novel Z-scheme heterojunction of Bi4O5Br2/Bi2S3 with covalent S-O bonds was prepared via a facile one-pot hydrothermal and subsequent annealing process. The prepared optimal Bi4O5Br2/Bi2S3 composite exhibited remarkable photo-degradation activity towards the sodium dodecylbenzene sulfonate (SDBS). The Z-scheme reaction mechanism was proposed and validated by meticulous analysis of quenching tests, ESR spectroscopy and DFT calculations. Furthermore, the presence of chemical S-O linkages between Bi4O5Br2 and Bi2S3 was identified via FT-IR and XPS analyses, which served as a distinct bridge to modify the Z-scheme route for carrier transport. The Z-scheme heterostructure, in conjunction with chemical S-O bonds, synergistically enhanced the separation rate of electron-hole pairs and thus greatly boosted the photocatalytic activity. Additionally, the possible degradation pathways of SDBS were proposed by using HR-MS technology. Moreover, real hotel laundry wastewater could be efficiently disposed by the photocatalysis of the Bi4O5Br2/Bi2S3 with a decrease in the COD value from 428 to 74 mg/L, indicating that the fabricated Z-scheme heterojunction hold great promise for effectively removing refractory surfactant contaminants from aquatic environment.

Enhancing Pollutant Mineralization through Organic-Inorganic Defect-Transit Dual S-scheme with a Robust Internal Electric Field

Achieving superior photomineralization of pollutants relies on a rational design of a dual S-scheme with a robust internal electric field (IEF). In this study, to tackle the low mineralization rate in type-II In2 O3 /In2 S3 (IO/IS) systems, an organic-inorganic dual S-scheme In2 O3 /PDI/In2 S3 (IO/PDI/IS) nanostructured photocatalyst is synthesized via a method combining solvent-induced self-assembly and electrostatic forces. Due to the unique energy band position and strong IEF, the photoinduced defect-transit dual S-scheme IO/PDI/IS facilitates the degradation of lignin and antibiotics. Notably, a promising mineralization rate of 80.9% for sodium lignosulfonate (SL) is achieved. The charge transport pathway of IO/PDI/IS are further validated through the analysis of in situ X-ray photoelectron spectroscopy (in situ XPS), density functional theory calculations, and radical trapping experiments. In-depth, two possible pathways for the photocatalytic degradation of lignin are proposed based on the intermediates monitored by liquid chromatography-mass spectrometry (LC-MS). This study presents a new strategy for the design of organic-inorganic dual S-scheme photocatalysts with a robust IEF for pollutant degradation.

Exploring a Ni-N4 Active Site-Based Conjugated Microporous Polymer Z-Scheme Heterojunction Through Covalent Bonding for Visible Light-Driven Photocatalytic CO2 Conversion in Pure Water

Designing photocatalysts with efficient charge transport and abundant active sites for photocatalytic CO2 reduction in pure water is considered a potential approach. Herein, a nickel-phthalocyanine containing Ni-N4 active sites-based conjugated microporous polymer (NiPc-CMP), offering highly dispersed metal active sites, satisfactory CO2 adsorption capability, and excellent light harvesting properties, is engineered as a photocatalyst. By virtue of the covalently bonded bridge, an atomic-scale interface between the NiPc-CMP/Bi2 WO6 Z-scheme heterojunction with strong chemical interactions is obtained. The interface creates directional charge transport highways and retains a high redox potential, thereby enhancing the photoexcited charge carrier separation and photocatalytic efficiency. Consequently, the optimal NiPc-CMP/Bi2 WO6 (NCB-3) achieves efficient photocatalytic CO2 reduction performance in pure water under visible-light irradiation without any sacrificial agent or photosensitizer, affording a CO generation rate of 325.9 µmol g-1 with CO selectivity of 93% in 8 h, outperforming those of Bi2 WO6 and NiPc-CMP, individually. Experimental and theoretical calculations reveal the promotion of interfacial photoinduced electron separation and the role of Ni-N4 active sites in photocatalytic reactions. This study presents a high-performance CMP-based Z-scheme heterojunction with an effective interfacial charge-transfer route and rich metal active sites for photocatalytic CO2 conversion.

Efficient Photothermal Anti-/Deicing Enabled by 3D Cu2-x S Encapsulated Phase Change Materials Mixed Superhydrophobic Coatings

Photothermal superhydrophobic surfaces are one of the most promising anti-/deicing materials, yet they are limited by the low energy density and intermittent nature of solar energy. Here, a coupling solution based on microencapsulated phase change materials (MPCMs) that integrates photothermal effect and phase change thermal storage is proposed. Dual-shell octahedral MPCMs with Cu2 O as the first layer and 3D Cu2-x S as the second layer for the first time is designed. By morphology and phase manipulation of the Cu2-x S shell, the local surface plasmonic heating modulation of MPCMs is realized, and the MPCM reveals full-spectrum high absorption with a photothermal conversion efficiency up to 96.1%. The phase change temperature and enthalpy remain in good consistency after 200 cycles. Multifunctional photothermal phase-change superhydrophobic composite coatings are fabricated by combining the hydrolyzed and polycondensation products of octadecyl trichlorosilane and the dual-shell MPCM. The multifunctional coatings exhibit excellent anti-/deicing performance under low temperature and high humidity conditions. This work not only provides a new approach for the design of high-performance MPCMs but also opens up an avenue for the anti-icing application of photothermal phase-change superhydrophobic composite coatings.

γ-Ray-Induced Photocatalytic Activity of Bi-Doped PbS toward Organic Dye Removal under Sunlight

Photocatalysts based on semiconducting chalcogenides due to their adaptable physio-chemical characteristics are attracting attention. In this work, Bi-doped PbS (henceforth PbS:Bi) was prepared using a straightforward chemical precipitation approach, and the influence of γ-irradiation on PbS's photocatalytic ability was investigated. Synthesized samples were confirmed structurally and chemically. Pb(1-x)BixS (x = 0, 0.005, 0.01, 0.02) samples that were exposed to gamma rays showed fine-tuning of the optical bandgap for better photocatalytic action beneath visible light. The photocatalytic degradation rate of the irradiated Pb0.995Bi0.005S sample was found to be 1.16 times above that of pure PbS. This is due to the occupancy of Bi3+ ions at surface lattice sites as a result of their lower concentration in PbS, which effectively increases interface electron transport and the annealing impact of gamma irradiation. Scavenger tests show that holes are active species responsible for deterioration of the methylene blue. The irradiated PbS:Bi demonstrated high stability after being used repeatedly for photocatalytic degradation.

Novel Z-scheme MgFe2O4/Bi2WO6 heterojunction for efficient photocatalytic degradation of tetracycline hydrochloride: Mechanistic insight, degradation pathways and density functional theory calculations

In this study, a new Z-scheme MgFe2O4/Bi2WO6 heterojunction was successfully prepared by hydrothermal and wet ball milling process. The results of the study showed that after 90 min of visible light exposure, the photocatalytic degradation of tetracycline hydrochloride (TCH) by 25%-MgFe2O4/Bi2WO6 heterojunction was as high as 95.82%, and the highest photocatalytic rate (0.0281 min-1) was 4.61 and 3.43 times higher than that of pure Bi2WO6 (0.0061 min-1) and MgFe2O4 (0.0082 min-1), respectively. Furthermore, spin-polarized density functional theory (DFT) calculations were performed to provide additional evidence of the presence of a Z-scheme charge transfer mechanism between MgFe2O4 and Bi2WO6. We investigated the effects of initial TCH concentration, pH, coexisting ions and different water sources on the efficiency of photocatalytic degradation of TCH in composite samples. The recovery experiments demonstrated that the MgFe2O4/Bi2WO6 composites had good stability and repeatability. A series of experimental results showed that 25%-MgFe2O4/Bi2WO6 had a larger specific surface area, better ultraviolet and visible absorbance, superior charge transfer and higher efficiency of photogenerated electron-hole pair separation. This paper provides new ideas for the design and preparation of new Z-scheme heterojunctions and has great prospects for practical applications in the field of wastewater treatment.

Simplified synthesis of direct Z-scheme Bi2WO6/PhC2Cu heterojunction that shows enhanced photocatalytic degradation of 2,4,6-TCP: Kinetic study and mechanistic insights

For this work, we employed n-type Bi2WO6 and p-type PhC2Cu to formulate a direct Z-scheme Bi2WO6/PhC2Cu (PCBW) photocatalyst via simplified ultrasonic stirring technique. An optimal 0.6PCBW composite exhibited the capacity to rapidly photodegrade 2,4,6-TCP (98.6% in 120 min) under low-power blue LED light, which was 8.53 times and 12.53 times faster than for pristine PhC2Cu and Bi2WO6, respectively. Moreover, electron spin resonance (ESR), time-resolved PL spectra, and quantitative ROS tests indicated that the PCBW enhanced the separation capacity of photocarriers. It also more readily associated with dissolved oxygen in water to generate reactive oxygen species (ROS). Among them, the ability of PCBW to produce ·O2- in one hour was 12.07 times faster than for pure PhC2Cu. In addition, the H2O2 formation rate and apparent quantum efficiency of PCBW are 10.73 times that of PhC2Cu, which indicates that PCBW not only has excellent photocatalytic performance, but also has outstanding ROS production ability. Furthermore, Ag photodeposition, in situ X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations were utilized to determine the photogenerated electron migration paths in the PCBW, which systematically confirmed that Z-scheme heterojunction were successfully formed. Finally, based on the intermediate products, three potential 2,4,6-TCP degradation pathways were proposed.

Regulation of friction pair to promote conversion of mechanical energy to chemical energy on Bi2WO6 and realization of enhanced tribocatalytic activity to degrade different pollutants

Recently, friction-induced tribocatalysis has received tremendous attention through converting mechanical energy to chemical energy. However, its efficiency is much lower than those of photocatalysis and piezocatalysis, and its environmental application is limited in dye degradation. Herein, we developed a facile approach to improve the tribocatalytic activity of Bi2WO6 via adding trace polymer powders to form friction pairs with Bi2WO6. Among various polymers, PTFE was demonstrated to be the best counterpart of Bi2WO6. Subsequently, the PTFE dosage, stirring rate, magnetic bar size and number, and stirring mode were further optimized. The PTFE-promoted Bi2WO6 tribocatalysis was verified to possess excellent performance not only for removing different dyes, but also for degrading chlorophenols that are typical persistent organic pollutants. Multiple uses of the recycled catalysts indicated its good stability and prominent tribocatalytic durability. EPR measurements suggested the generation of hydroxyl radical and superoxide radical, which were determined to be continuously generated within 12 h at the rates of 0.88 μM h-1 and 85 μM h-1, respectively. Subsequently, a possible mechanism was proposed to explain the enhanced performance of the PTFE-promoted Bi2WO6 tribocatalysis. Finally, on basis of the detected intermediates, the degradation pathways of Rhodamine B and 2,4-Dichlorophenol during tribocatalysis were suggested.