Modulating Electronic Structure with Copper Doping to Promote the Electrocatalytic Performance of Cobalt Disulfide in Li-O2 Batteries

Enhanced Li-O2 battery performance using NiS/MoS2 heterostructure by building internal electric field to promote the one-electron oxygen reduction/oxidation

Electrocatalysts with appropriate electron coupling toward LiO2 intermediates can exhibit superior oxygen reduction/evolution reaction kinetics in Li-O2 batteries (LOBs). In this work, a charge redistribution strategy has been developed by constructing NiS/MoS2 heterostructure nanosheet self-assembled hollow microspheres with an internal electric field to regulate the interaction with LiO2 and then improve the electrochemical performance of LOBs. Density functional theory calculations and physicochemical characterizations reveal that the difference of work functions between NiS and MoS2 promotes the electron redistribution in heterointerface via built-in electrical field, leading to increased electron density of interfacial Ni atom, thereby enhancing its electron coupling toward LiO2 intermediates and promoting one-electron oxygen reduction/oxidation reaction kinetics. As a result, the NiS/MoS2-based LOBs exhibit evidently higher discharge capacity and much better cycling performance than the batteries using NiS and MoS2. This work provides a reliable charge redistribution strategy induced by build-in electric field to design efficient catalysts for LOBs.

In Situ Fe/Co/B Codoped MoS2 Ultrathin Nanosheets Enable Efficient Electrocatalytic Nitrogen Reduction

The development of sustainable and effective electrochemical nitrogen fixation catalysts is crucial for the mitigation of the terrible energy consumption resulting from the Haber-Bosch process. Molybdenum disulfide (MoS2) exhibits promise toward nitrogen reduction reaction (NRR) on account of its similar structure to natural nitrogenases MoFe-co but still undergoes serious challenges with unsatisfactory catalytic performance resulted from limited active sites, conductivity, and selectivity. In this work, Fe/Co/B codoped MoS2 ultrathin nanosheets are synthesized and verified as excellent NRR catalysts with high activity, selectivity, and durability. The FeCoB-MoS2 demonstrates a high ammonia yield of 36.99 μg h-1 mgcat-1 at -0.15 V vs RHE and Faraday efficiency (FE) of 30.65% at -0.10 V vs RHE in 0.1 M HCl. The experimental results and the density functional theory (DFT) calculations emphasize that codoping of Fe, Co, and B into MoS2 synergistically enhances its conductivity and optimizes the electronic structure of the catalyst, which significantly improves the electrocatalytic ammonia synthesis performance. This work broadens the potential and enlightens the strategy for designing efficient electrocatalysts in the NRR field.

Constructing Built-In Electric Field in NiCo2O4-CeO2 Heterostructures to Regulate Li2O2 Formation Routes at High Current Densities

Developing catalysts with suitable adsorption energy for oxygen-containing intermediates and elucidating their internal structure-performance relationships are essential for the commercialization of Li-O2 batteries (LOBs), especially under high current densities. Herein, NiCo2O4-CeO2 heterostructure with a spontaneous built-in electric field (BIEF) is designed and utilized as a cathode catalyst for LOBs at high current density. The driving mechanism of electron pumping/accumulation at heterointerface is studied via experiments and density functional theory (DFT) calculations, elucidating the growth mechanism of discharge products. The results show that BIEF induced by work function difference optimizes the affinity for LiO2 and promotes the formation of nano-flocculent Li2O2, thus improving LOBs performance at high current density. Specifically, NiCo2O4-CeO2 cathode exhibits a large discharge capacity (9546 mAh g-1 at 4000 mA g-1) and high stability (>430 cycles at 4000 mA g-1), which are better than the majority of previously reported metal-based catalysts. This work provides a new method for tuning the nucleation and decomposition of Li2O2 and inspires the design of ideal catalysts for LOBs to operate at high current density.

First Principles Study of the Structure-Performance Relation of Pristine Wn+1Cn and Oxygen-Functionalized Wn+1CnO2 MXenes as Cathode Catalysts for Li-O2 Batteries

Li-O2 batteries are considered a highly promising energy storage solution. However, their practical implementation is hindered by the sluggish kinetics of the oxygen reduction (ORR) and oxygen evolution (OER) reactions at cathodes during discharging and charging, respectively. In this work, we investigated the catalytic performance of Wn+1Cn and Wn+1CnO2 MXenes (n = 1, 2, and 3) as cathodes for Li-O2 batteries using first principles calculations. Both Wn+1Cn and Wn+1CnO2 MXenes show high conductivity, and their conductivity is further enhanced with increasing atomic layers, as reflected by the elevated density of states at the Fermi level. The oxygen functionalization can change the electronic properties of WC MXenes from the electrophilic W surface of Wn+1Cn to the nucleophilic O surface of Wn+1CnO2, which is beneficial for the activation of the Li-O bond, and thus promotes the Li+ deintercalation during the charge-discharge process. On both Wn+1Cn and Wn+1CnO2, the rate-determining step (RDS) of ORR is the formation of the (Li2O)2* product, while the RDS of OER is the LiO2* decomposition. The overpotentials of ORR and OER are positively linearly correlated with the adsorption energy of the RDS LixO2* intermediates. By lowering the energy band center, the oxygen functionalization and increasing atomic layers can effectively reduce the adsorption strength of the LixO2* intermediates, thereby reducing the ORR and OER overpotentials. The W4C3O2 MXene shows immense potential as a cathode catalyst for Li-O2 batteries due to its outstanding conductivity and super-low ORR, OER, and total overpotentials (0.25, 0.38, and 0.63 V).

ZIF-67 based CoS2 self-assembled on graphitic carbon nitride microtubular for sensitive electrochemical detection of paraquat in fruits

Paraquat (PQ) is a widely used and harmful herbicide that must be detected in the environment. This study reports a novel composite (CoS2-GCN) prepared by assembling cobalt disulfide (CoS2) derived from metal-organic frameworks (MOFs) on graphitic carbon nitride (GCN). An electrochemical sensor (CoS2-GCN/ glassy carbon electrode (GCE)) was successfully prepared by modifying CoS2-GCN onto a GCE to sensitively detect PQ. Different concentrations of PQ were detected using square-wave voltammetry, and the CoS2-GCN/GCE electrochemical sensor showed remarkable response signals for PQ in the range of 20 - 1000 nM and 1 - 13 μM, with a detection limit of 4.13 nM (S/N = 3). The CoS2-GCN/GCE electrochemical sensor exhibited high stability, reproducibility, and immunity to interference, which were attributed to the synergistic effects of CoS2 and GCN. In addition, the CoS2-GCN/GCE electrochemical sensor showed high applicability for the analysis of fruit samples. Therefore, the proposed sensor has potential applications in PQ detection.

Construction of Co-ZIF-derived CoS2@Cu hollow heterogeneous nanotube array for the detection of hydrazine in environmental water samples

As a neurotoxin, it is necessary to establish a low cost, stable and sensitive method for the quantitative detection of hydrazine. Using Co-ZIF (zeolite imidazole framework) nanorods as precursor, CoS2 hollow nanotube array heterogeneous structure loaded with Cu nanoparticles were prepared on carbon cloth (CC) by etching, calcination and plasma magnetron sputtering (CoS2@Cu HNTA/CC). As a self-supporting electrode, its hollow heterogeneous structure provides a large area of electron transfer channel for the oxidation of the food pollutant hydrazine. In addition, bimetallic synergies and in situ N doping regulated the electronic structure of CoS2@Cu HNTA/CC, and thus significantly improved the electrical conductivity and catalytic activity. As an efficient hydrazine sensor with a wide linear range of 1 μM L-1-10 mM (1 μM-1 mM and 1 mM-10 mM), its sensitivity and the limit of detection are 7996 μA mM-1 cm-2, 3772 μA mM-1 cm-2 and 0.276 μM (S/N = 3), respectively. This study provides a new strategy for the construction of MOFs (Metal Organic Framework)-derived bimetallic composites and their application in electrochemical sensing.