Robust and Multifunctional Ti3 C2 Tx /Modified Sawdust Composite Paper for Electromagnetic Interference Shielding and Wearable Thermal Management

Ultralight Three-Layer Gradient-Structured MXene/ Reduced Graphene Oxide Composite Aerogels with Broadband Microwave Absorption and Dynamic Infrared Camouflage

Infrared and radar detectors posed substantial challenges to weapon equipment and personnel due to their continuous surveillance and reconnaissance capabilities. Traditional single-band stealth devices are insufficient for dual-band detection in both infrared and microwave bands. To overcome this limitation, a gradient-structured MXene/reduced graphene oxide (rGO) composite aerogel (GMXrGA) is fabricated through a two-step bidirectional freeze casting process, followed by freeze-drying and thermal annealing. GMXrGA exhibits a distinct three-layered structure, with each layer playing a crucial role in microwave absorption. This deliberate design amplifies both the efficiency of microwave absorption and the material's effectiveness in dynamic infrared camouflage. GMXrGA displays an ultralow density of 5.2 mg∙cm-3 and demonstrates exceptional resistance to compression, enduring 200 cycles at a maximum strain of 80%. Moreover, it shows superior microwave absorption performance, with a minimum reflection loss (RLmin) of -60.1 dB at a broad effective absorption bandwidth (EAB) of 14.1 GHz (3.9-18.0 GHz). Additionally, the aerogel exhibits low thermal conductivity (≈26 mW∙m-1∙K-1) and displays dynamic infrared camouflage capabilities within the temperature range of 50-120 °C, achieving rapid concealment within 30 s. Consequently, they hold great potential for diverse applications, including intelligent buildings, wearable electronics, and weapon equipment.

Integrated Thermal Conductive and Electromagnetic Interference Shielding Performance in Polyimide Composite: Impact of Carbon Felt-Graphene Van der Waals Heterostructure

With the widespread application of highly integrated electronic devices, the urgent development of multifunctional polymer-based composite materials with high electromagnetic interference shielding effectiveness (EMI SE) and thermal conductivity capabilities is critically essential. Herein, a graphene/carbon felt/polyimide (GCF/PI) composite is prepared through constructing 3D van der Waals heterostructure by heating carbon felt and graphene at high temperature. The GCF-3/PI composite exhibits the highest through-plane thermal conductivity with 1.31 W·m-1·K-1, when the content of carbon felt and graphene is 14.1 and 1.4 wt.%, respectively. The GCF-3/PI composite material achieves a thermal conductivity that surpasses pure PI by 4.9 times. Additionally, GCF-3/PI composite shows an outstanding EMI SE of 69.4 dB compared to 33.1 dB for CF/PI at 12 GHz. The 3D van der Waals heterostructure constructed by carbon felt and graphene sheets is conducive to the formation of continuous networks, providing fast channels for the transmission of phonons and carriers. This study provides a guidance on the impact of 3D van der Waals heterostructures on the thermal and EMI shielding properties of composites.

A Scalable and Robust Personal Health Management Textile with Multiple Desired Thermal Functions and Electromagnetic Shielding

The development of functional textiles combining conventional apparel with advanced technologies for personal health management (PHM) has garnered widespread attention. However, the current PHM textiles often achieve multifunctionality by stacking functional modules, leading to poor durability and scalability. Herein, a scalable and robust PHM textile is designed by integrating electrical, radiative, and solar heating, electromagnetic interference (EMI) shielding, and piezoresistive sensing performance onto cotton fabric. This is achieved through an uncomplicated screen-printing process using silver paste. The conductivity of the PHM textile is ≈1.6  ×  104 S m-1, ensuring an electric heating temperature of ≈134 °C with a low voltage of 1.7 V, as well as an EMI shielding effectiveness of ≈56 dB, and human motion monitoring performance. Surprisingly, the radiative/solar heating capability of the PHM textile surpasses that of traditional warm leather. Even after undergoing rigorous physical and chemical treatments, the PHM textile maintains terrific durability. Additionally, the PHM textile possesses maneuverable scalability and comfortable wearability. This innovative work opens up new avenues for the strategic design of PHM textiles and provides an advantageous guarantee of mass production.

Hollow Metal-Organic Framework/MXene/Nanocellulose Composite Films for Giga/Terahertz Electromagnetic Shielding and Photothermal Conversion

With the continuous advancement of communication technology, the escalating demand for electromagnetic shielding interference (EMI) materials with multifunctional and wideband EMI performance has become urgent. Controlling the electrical and magnetic components and designing the EMI material structure have attracted extensive interest, but remain a huge challenge. Herein, we reported the alternating electromagnetic structure composite films composed of hollow metal-organic frameworks/layered MXene/nanocellulose (HMN) by alternating vacuum-assisted filtration process. The HMN composite films exhibit excellent EMI shielding effectiveness performance in the GHz frequency (66.8 dB at Ka-band) and THz frequency (114.6 dB at 0.1-4.0 THz). Besides, the HMN composite films also exhibit a high reflection loss of 39.7 dB at 0.7 THz with an effective absorption bandwidth up to 2.1 THz. Moreover, HMN composite films show remarkable photothermal conversion performance, which can reach 104.6 °C under 2.0 Sun and 235.4 °C under 0.8 W cm-2, respectively. The unique micro- and macro-structural design structures will absorb more incident electromagnetic waves via interfacial polarization/multiple scattering and produce more heat energy via the local surface plasmon resonance effect. These features make the HMN composite film a promising candidate for advanced EMI devices for future 6G communication and the protection of electronic equipment in cold environments.

A Janus Textile with Tunable Heating Modes toward Precise Personal Thermal Management in Cold Conditions

Passive heating textiles (PHTs) have drawn increasing attention due to the advantages of energy-conservation heating. However, the heating capabilities of current PHTs are typically static and non-tunable, presenting poor adaptation to dynamic winter. Herein, a novel Janus textile with tunable heating modes is developed by constructing a customized structure with asymmetric optical properties. This Janus textile is created by coating one side of a cotton fabric with silver nanowires (AgNWs) and then applying transition metal carbides/nitrides (MXene) to the other side. The MXene side exhibits high solar absorptivity and low mid-infrared emissivity, while the AgNWs side has moderate solar absorptivity and mid-infrared emissivity. This structure ensures that the solar and radiative heating temperatures of the MXene side are 16 °C and 1.7 °C higher than those of the AgNWs side. This distinction allows for on-demand, accurate adjustments in solar and radiative heating capabilities by flipping the textile according to ambient temperature. Furthermore, this innovative design also features desired electric heating, thermal camouflage, self-cleaning and antibacterial properties, electromagnetic interference shielding, durability, and wearability. The Janus textile enables precise thermoregulation of the human body to adapt to variable cold weather, making it essential for optimal personal thermal management and climate change mitigation.

Tailoring Interfaces of All-Carbon Electromagnetic Interference Shielding Materials for Boosting Comprehensive Performance

Electromagnetic interference (EMI) shielding materials with lightweight, high shielding effectiveness, excellent chemical stability, especially minimized secondary electromagnetic pollution, are urgently desired for integrated electronic systems operating in harsh working environments. Here in this study, by systematically engineering and matching the interfacial properties of carbon-based membrane materials, i.e., graphite paper, whisker carbon nanotube paper (WCNT paper), carbon nanotube film (CNT film), bucky paper (BP), and carbon cloth (CC) with three-dimensional (3D) porous carbon nanotube sponge (CNTS), we successfully constructed a series of multifunctional all-carbon EMI shielding materials, which exhibit excellent average shielding effectiveness of over 90 dB with a thickness of about 1 mm and dramatically minimized secondary electromagnetic reflection. Moreover, benefiting from the all-carbon nature and engineered interfaces, our CMC materials also exhibit excellent photothermal and Joule heating performances. These results not only provide guidance for designing advanced multifunctional all-carbon EMI shielding materials but also shed light on the hidden mechanism between interfaces and performances of composite materials.