Ion-Exchange Strategy for Metal-Organic Frameworks-Derived Composites with Tunable Hollow Porous and Microwave Absorption

Designing transition metal-based porous architectures for supercapacitor electrodes: a review

Over the past decade, transition metal (TM)-based electrodes have shown intriguing physicochemical properties and widespread applications, especially in the field of supercapacitor energy storage owing to their diverse configurations, composition, porosity, and redox reactions. As one of the most intriguing research interests, the design of porous architectures in TM-based electrode materials has been demonstrated to facilitate ion/electron transport, modulate their electronic structure, diminish strain relaxation, and realize synergistic effects of multi-metals. Herein, the recent advances in porous TM-based electrodes are summarized, focusing on their typical synthesis strategies, including template-mediated assembly, thermal decomposition strategy, chemical deposition strategy, and host-guest hybridization strategy. Simultaneously, the corresponding conversion mechanism of each synthesis strategy are reviewed, and the merits and demerits of each strategy in building porous architectures are also discussed. Subsequently, TM-based electrode materials are categorized into TM oxides, TM hydroxides, TM sulfides, TM phosphides, TM carbides, and other TM species with a detailed review of their crystalline phase, electronic structure, and microstructure evolution to tune their electrochemical energy storage capacity. Finally, the challenges and prospects of porous TM-based electrode materials are presented to guide the future development in this field.

UV-modification of Ag nanoparticles on α-MoCx for interface polarization engineering in electromagnetic wave absorption

The design of electromagnetic wave absorbing materials (EWAMs) has aroused great attention with the express development of electromagnetic devices, which pose a severe EM pollution risk to human health. Herein, an Ag-doped MoCx composite was designed and constructed through a UV-light-induced self-reduction process. The UV-reduction time was controlled on the α-MoC polymer for 0.5-2 hours for modifying different amounts of Ag. As a result, α-MoC@Ag-1.5 exhibited the strongest RLmin of -56.51 dB at 8.8 GHz under a thickness of 3.0 mm and the widest EAB of 4.96 GHz (12.16-17.12 GHz) covering a substantial portion of the Ku-band at a thickness of 2.0 mm due to the synergy of the conductivity loss and abundant interfacial polarization sites. Additionally, a new strategy for computer simulation technology was proposed to simulate substantial radar cross-sectional reduction values with real far-field conditions, whereby absorbing coatings with α-MoC@Ag-1.5 were proved to contribute to a remarkable radar cross-sectional reduction of 37.4 dB m2.

Controllable fabrication of CoNi bimetallic alloy for high-performance electromagnetic wave absorption

With the coming era of artificial intelligence (AI) dominated by high-tech electronics, developing high-performance microwave absorption materials (MAMs) is imperative to solve the problem of increasing electromagnetic inference and pollution. Herein, a metal-organic framework (MOF)-derived CoNi bimetallic alloy (CoNi/C) with an irregular rod-like structure is prepared by a thermal reduction method. Introducing the CoNi alloy facilitates the balance between conduction loss and polarization loss and forms good impedance matching, leading to excellent microwave absorption performance. Interestingly, the optimization of absorption performance can be further achieved by controllably modulating the molar ratio of Co and Ni (Co2+/Ni2+). As expected, the obtained CoNi/C delivers excellent microwave absorption performance with a minimum reflection loss (RLmin) of -50.80 dB at 10.40 GHz and an effective absorption bandwidth (EAB) of 3.28 GHz (8.91-12.19 GHz) with a filler loading of 50 wt% at 2.0 mm. In addition, the CoNi/C can reach a maximum EAB of 4.77 GHz (12.99-17.76 GHz) at a low thickness of 1.5 mm, spanning nearly the entire Ku band. The CoNi3/C also exhibits an impressive RLmin of -44.84 dB at 3.28 GHz in the S band. This work offers a novel strategy to modulate the magnetic/electric properties of MOF-derived MAMs.

Modulation Engineering of Electromagnetic Wave Absorption Performance of Layered Double Hydroxides Derived Hollow Metal Carbides Integrating Corrosion Protection

Layered double hydroxides (LDHs) with unique layered structure and atomic composition are limited in the field of electromagnetic wave absorption (EMA) due to their poor electrical conductivity and lack of dielectric properties. In this study, the EMA performance and anticorrosion of hollow derived LDH composites are improved by temperature control and composition design using ZIF-8 as a sacrifice template. Diverse regulation modes result in different mechanisms for EMA. In the temperature control process, chemical reactions tune the composition of the products and construct a refined structure to optimize the LDHs conductivity loss. Additionally, the different phase interfaces generated by the control components optimize the impedance matching and enhance the interfacial polarization. The results show that the prepared NCZ (Ni3ZnC0.7/Co3ZnC@C) has a minimum reflection loss (RLmin ) of -58.92 dB with a thickness of 2.4 mm and a maximum effective absorption bandwidth (EABmax ) of 7.36 GHz with a thickness of 2.4 mm. Finally, due to its special structure and composition, the sample exhibits excellent anticorrosion properties. This work offers essential knowledge for designing engineering materials derived from metal organic framework (MOF) with cutting-edge components and nanostructures.

Controlled Synthesis of MOF-Derived Nano-Microstructure toward Lightweight and Wideband Microwave Absorption

Correlating metal-organic framework (MOF) synthesis processes and microwave absorption (MA) enhancement mechanisms is a pioneer project. Nevertheless, the correlation process still relies mainly on empirical doctrine, which hardly corresponds to the specific mechanism of the effect on the dielectric properties. Hereby, after the strategy of modulation of protonation engineering and solvothermal temperature in the synthesis route, the obtained sheet-like self-assembled nanoflowers were constructed. Porous structures with multiple heterointerfaces, abundant defects, and vacancies are obtained by controlled design of the synthesis procedure. The rearrangement of charges and enhanced polarization can be promoted. The designed electromagnetic properties and special nano-microstructures of functional materials have significant impact on their electromagnetic wave energy conversion effects. As a consequence, the MA performance of the samples has been enhanced toward broadband absorption (6.07 GHz), low thickness (2.0 mm), low filling (20%), and efficient loss (-25 dB), as well as being suitable for practical environmental applications. This work establishes the connection between the MOF-derived materials synthesis process and the MA enhancement mechanism, which provides insight into various microscopic microwave loss mechanisms.

Scrolling reduced graphene oxides to induce room temperature magnetism via spatial coupling of defects

Due to its intriguing features and numerous applications, graphene has garnered a lot of interest in recent years. However, it is still very difficult to create graphene-based room-temperature magnets without transition metals or rare earth elements since pristine graphene is inherently diamagnetic due to the delocalized π bonding network. Herein, room-temperature ferromagnetism with a saturation magnetization of 0.93 emu g-1 (300 K) is achieved in defect-rich-reduced graphene oxide (DR-rGO) nanoscrolls by creating a spatial coupling of defects. The experiments and DFT calculations verify that spatial coupling of defects could enhance Rudermann-Kittel-Kasuya-Yosida interactions to induce magnetism in graphene. It displays high-efficiency electromagnetic wave absorption performance with a minimal reflection loss of -62.1 dB and an effective absorption bandwidth of 7.8 GHz (3.0 mm) thanks to greatly improved magnetism. This breakthrough serves as a building block for the creation of room-temperature magnetic carbon materials and expands their applications in many pertinent domains.

Construction of Hollow Carbon Nanofibers with Graphene Nanorods as Nano-Antennas for Lower-Frequency Microwave Absorption

Electromagnetic (EM) wave absorbers at a lower-frequency region (2-8 GHz) require higher attenuation ability to achieve efficient absorption. However, the impedance match condition and attenuation ability are usually inversely related. Herein, one-dimensional hollow carbon nanofibers with graphene nanorods are prepared based on coaxial electrospinning technology. The morphology of graphene nanorods can be controlled by the annealing process. As the annealing time increased from 2 to 8 h, graphene nanospheres grew into graphene nanorods, which were catalyzed by Co catalysts derived from ZIF-67 nanoparticles. These nanorods can play the role of nano-antennas, which can guide EM waves into materials to enhance impedance match conditions. As a result, the carbon nanofibers with graphene nanorods possess a larger impedance match area with higher attenuation ability. The minimum reflection loss reaches -57.1 dB at a thickness of 4.6 mm, and the effective absorption bandwidth can cover almost both the S and C bands (2.4-8 GHz). This work contributes a meaningful perspective into the modulation of microwave absorption performance in the lower-frequency range.

Texture Regulation of Metal-Organic Frameworks, Microwave Absorption Mechanism-Oriented Structural Optimization and Design Perspectives

Texture regulation of metal-organic frameworks (MOFs) is essential for controlling their electromagnetic wave (EMW) absorption properties. This review systematically summarizes the recent advancements in texture regulation strategies for MOFs, including etching and exchange of central ions, etching and exchange of ligands, chemically induced self-assembly, and MOF-on-MOF heterostructure design. Additionally, the EMW absorption mechanisms in approaches based on structure-function dependencies, including nano-micro topological engineering, defect engineering, interface engineering, and hybrid engineering, are comprehensively explored. Finally, current challenges and future research orientation are proposed. This review aims to provide new perspectives for designing MOF-derived EMW-absorption materials to achieve essential breakthroughs in mechanistic investigations in this promising field.

Facile synthesis of ZIF-67 derived dodecahedral C/NiCO2S4 with broadband microwave absorption performance

The increasing hazard of electromagnetic radiation prompts people to pursue absorbing materials with better performance. However, absorbing materials with a single loss mechanism usually is unable to obtain better absorbing performance due to low impedance matching or high filling ratio. Therefore, this work proposes a C/NiCo₂S₄ (CNCS) material with both dielectric loss/magnetic loss to achieve efficient absorption of electromagnetic waves. The simple preparation of CNCS materials was achieved through the etching of the ZIF-67 template by nickel nitrate and the subsequent hydrothermal vulcanization process. Its unique prismatic dodecahedron hollow structure promotes multiple scattering of electromagnetic waves. The attachment of the magnetic NiCo₂S₄ particles on the surface of the carbon template further promotes the interface polarization and dipole polarization, which is equivalent to the formation of a resistance-rich microcircuit and enhances the effect of the conductance loss on electromagnetic waves. At 2-18 GHz, the CNCS-2 with 30% paraffin addition achieves an effective bandwidth of 5.54 GHz at a matching thickness of 1.7 mm, and has a maximum reflection loss of -36.44 dB at 1.5 mm. By adjusting the thickness of the material matching layer (1-3 mm), an effective bandwidth of up to 13.48 GHz can be achieved, perfectly covering the X-band and Ku-band. Based on the simple preparation process of the material, the special hollow structure and the multiple loss mechanisms for electromagnetic waves, we believe that CNCS can become a strong competitor for high-efficiency broadband absorbers.

Preparation of porous CoNi/N-doped carbon microspheres based on magnetoelectric coupling strategy: A new choice against electromagnetic pollution

Magnetoelectric coupling is a key strategy to obtain high-performance microwave absorption materials. Especially for carbon matrix composites, the absorbing capacity can be optimized via the tuning of the graphitization degree and the content ratio of the magnetic and dielectric components. Based on this theory, a simple strategy, consisting of the solvothermal method and annealing in an inert atmosphere, is adopted in this study to combine CoNi magnetic alloys with graphitized carbon into micron-scale composite spherical particles. Additionally, special attention is paid to the correlation among the graphitization degree of carbon matrix, component proportion, and dielectric response ability, so as to achieve a flexible micromorphology design and a tunable microwave absorption performance. When the pyrolysis temperature is offset to the best of 700 ℃, a broadband absorption of 6.61 GHz (reflection loss <  - 10 dB) is achieved at an ultrathin matching thickness of 1.9 mm. Adjusting the carbon content can further optimize the impedance matching and realize a high-intensity absorption with a reflection loss of - 72.7 dB. Our work proposes a useful strategy to realize the effective combination of the magnetic and dielectric loss mechanisms and boost the microwave absorption capacity toward achieving the desired broadband and a high-efficiency absorption performance.