Tensile-Strained Holey Pd Metallene toward Efficient and Stable Electrocatalysis

Electric Field-Induced Synergetic Enhancement of Local Hydroxyl Concentration and Photogenerated Carrier Density for Removal of COads in Electrocatalytic Formic Acid Oxidation

Direct formic acid fuel cell (DFAFC) is an efficient power generation device, due to its high energy density, low fuel crossover and low emission. However, the anodic reaction of DFAFC, formic acid oxidation (FAOR), inevitably proceeds through an indirect pathway, adsorbing carbon monoxide intermediate (COads), resulting in a rapid decline of activity for FAOR. Therefore, effectively removing COads is the key to the development of DFAFC. In this work, Pd/CeO2 catalyst is synthesized by in situ growth of Pd nanoparticles on the hollow CeO2. Due to the difference of work function between Pd and CeO2, a built-in electric field from Pd side to CeO2 side is formed, which induces a synergistic enhancement of the photogenerated carrier density and the local high hydroxyl concentration at the Pd/CeO2 interface, thus promoting the oxidative removal of COads and significantly improving the stability of FAOR. Therefore, in photo-assisted electrocatalytic FAOR, Pd/CeO2 not only possessed high mass activity (4161.72 mA mg-1 Pd), and its mass activity decreases by only 20.1% after 40000 s chronoamperometry test, which is superior to most Pd-based catalysts. This work provides a new strategy for efficient removal of COads in FAOR through constructing built-in electric fields, which promotes the DFAFC application.

Large-Scale Atomic Strain Defects on Palladium Surfaces for Enhanced Oxygen Reduction and Zinc-Air Batteries

Designing nano-electrocatalysts rich in surface defects is critical to improve their catalytic performance. However, prevailing synthesis techniques rely heavily on complex procedures that compromise defect extensiveness and uniformity, casting a high demand for methods capable of synthesizing large-scale crystalline defects. An innovative design strategy is herein proposed that induces ample strain/dislocation defects during the growth of palladium (Pd), which is well-known as a good oxygen reduction reaction (ORR) catalyst. The controlled defect engineering on Pd core is achieved by the tensile stress exerted from an intentionally applied Fe3O4 skin layer during synthesis, which changes the surface free energy of Pd to stabilize the defect presence. With such large-scale crystalline defects, this Pd catalyst exhibits significantly higher ORR activity than commercial Pt/C, enabling its promising future in zinc-air battery catalysis. Additionally, the protective Fe3O4 skin covering the catalyst also enhances its catalytic stability. Theoretical calculations show that the superior catalytic property of such defect-engineered Pd is associated with the correspondingly modified adsorption energy of *O intermediates onto its surface, which further improves the reaction rate and thus boosts ORR kinetics. Findings here are expected to provide a paradigm for designing efficient and stable metal catalysts with plentiful large-scale strain defects.

Mesoporous Hollow Carbon Sphere-Embedded MXene Architectures Decorated with Ultrafine Rh Nanocrystals toward Methanol Electrooxidation

The development of advanced Pt-alternative anode electrocatalysts with high activity and reliable stability is critical to overcoming the technical challenges of direct methanol fuel cells. Here, we propose a robust bottom-up strategy for the spatial construction of mesoporous hollow carbon sphere (HCS)-embedded MXene architectures decorated with ultrafine Rh nanocrystals (Rh/HCS-MX) via stereoscopic coassembly reactions. The rational intercalation of HCS effectively separates the MXene nanowalls to achieve a rapid mass-transfer efficiency, while the intimate coupling of the hybrid carrier with Rh nanocrystals enables their electronic structure optimization, thus contributing to strong synergistic catalytic effects. Accordingly, the resulting Rh/HCS-MX architectures exhibit outstanding methanol electrooxidation properties in terms of large electrochemical active surface areas, high mass/specific activities, and good long-term stability, all of which are significantly superior to the traditional Rh/carbon black, Rh/HCS, and Rh/MXene as well as commercial Pt/carbon balck and Pd/carbon balck electrocatalysts.

Construction of Pd-Te Intermetallic Compounds to Achieve Ultrastable Oxygen Reduction Activity

Palladium (Pd)-transition metal alloys have the potential to regulate the intermediate surface adsorption strength in oxygen reduction reactions (ORR), making them a promising substitute for platinum-based catalysts. Nonetheless, prolonged electrochemical cycling can lead to the depletion of transition metals, resulting in structural degradation and poor durability. Herein, the synthesis of alloy catalysts (Pd25%Te75%) containing Pd and the metalloid tellurium (Te) through a one-step reduction method is reported. Characterizations of powder X-ray photoelectron spectroscopy, X-ray diffraction, and high-resolution transmission electron microscopy demonstrated both uniform dispersion and strong binding force of elements within the PdTe alloy, along with providing crystallographic details of associated compounds. Based on density functional theory calculations, PdTe had a more negative d-band center than that of pure Pd, which reduces the adsorption capacity between active sites and intermediates in the ORR, and therefore enhances reaction kinetics. The Pd25%Te75% exhibited excellent ORR activity, and its onset and half-wave potentials were ∼0.98 and ∼0.90 V, respectively, at 1600 rpm within the O2-saturated 1.0 M KOH. Significantly, accelerated durability tests achieved exceptional stability, and half-wave potential just decayed by 4 mV after 30000 consecutive cycles. Moreover, this study aims to promote the preparation of Pd and metalloid alloys for other energy conversion applications.

Synthesizing Pd-based high entropy alloy nanoclusters for enhanced oxygen reduction

We report the synthesis of uniform Pd-based high-entropy alloy clusters via rapid Joule heating. The quinary PdMnFeCuNi clusters exhibit 4.95 times higher mass activity than the Commercial Pt/C for the oxygen reduction reaction, and outstanding stability with only 2 mV decay in the half-wave potential after 20 000 cycles of testing.

Boosting the Faraday Efficiency of Electrochemical Ammonia Synthesis via the Strain Effect Induced by Interfacial Hybrid Formation between BN and Carbon Nanotubes

The electrochemical nitrogen reduction reaction (eNRR) is a highly promising alternative to the Haber-Bosch (H-B) process, but its commercial development is limited by the high bond energy of N2 molecules and the presence of the competitive hydrogen evolution reaction (HER). Here, a metal-free composite electrocatalyst of boron nitride (h-BNNs) and carbon nanotubes (CNTs) was explored through the interfacial hybridization of h-BNNs and CNTs, which showed a highly improved eNRR Faraday efficiency (FE) of 63.9% and an NH3 yield rate of 36.5 μg h-1 mgcat.-1 at -0.691 V (vs RHE). New chemical bonds of C-B and C-N were observed, indicating a strong interaction between CNTs and h-BNNs. According to the Raman spectra and the optimized model of h-BNNs/CNTs, an obvious strain effect between h-BNNs and CNTs was supposed to play a significant role in the highly improved FE, compared with the FE of h-BNNs alone (4.7%). Density functional theory (DFT) calculations further showed that h-BNNs/CNTs had lower energy barriers in eNRR, giving them higher N2 to NH3 selectivity, while h-BNNs have lower energy barriers in the HER. This work shows the important role of the strain effect in boosting the selectivity in the eNRR process.

A universal strategy for green and surfactant-free synthesis of noble metal nanoparticles

We propose a universal, green, and surfactant-free strategy to synthesize noble metal particles with high monodispersity using gaseous H2 as a reducing agent in a solution at 60 °C. The prepared Pt nanoparticles have a 24 mV more positive half-wave potential than the commercially available Pt/C in the oxygen reduction reaction, while showing high durability with negligible half-wave potential decay after 10 000 cycles of testing.

Selective edge etching of Pd metallene for enhanced formic acid electrooxidation

We develop a facile, selective edge etching strategy to create edge sites in Pd metallene using acetic acid. The created edge sites remarkably increase the electrochemically active surface area but reduce the charge transfer resistance, resulting in significant enhancement of catalytic activity and stability toward formic acid oxidation.