Physical properties and structure of enzymatically synthesized amylopectin analogs

Advanced dendritic glucan-derived biomaterials: From molecular structure to versatile applications

There is considerable interest in the development of advanced biomaterials with improved or novel functionality for diversified applications. Dendritic glucans, such as phytoglycogen and glycogen, are abundant biomaterials with highly branched three-dimensional globular architectures, which endow them with unique structural and functional attributes, including small size, large specific surface area, high water solubility, low viscosity, high water retention, and the availability of numerous modifiable surface groups. Dendritic glucans can be synthesized by in vivo biocatalysis reactions using glucosyl-1-phosphate as a substrate, which can be obtained from plant, animal, or microbial sources. They can also be synthesized by in vitro methods using sucrose or starch as a substrate, which may be more suitable for large-scale industrial production. The large numbers of hydroxyl groups on the surfaces of dendritic glucan provide a platform for diverse derivatizations, including nonreducing end, hydroxyl functionalization, molecular degradation, and conjugation modifications. Due to their unique physicochemical and functional attributes, dendritic glucans have been widely applied in the food, pharmaceutical, biomedical, cosmetic, and chemical industries. For instance, they have been used as delivery systems, adsorbents, tissue engineering scaffolds, biosensors, and bioelectronic components. This article reviews progress in the design, synthesis, and application of dendritic glucans over the past several decades.

Effect of Starch Primers on the Fine Structure of Enzymatically Synthesized Glycogen-like Glucan

Glycogen-like glucan (GnG) is a unique hyperbranched polysaccharide nanoparticle which is drawing increasing attention due to its biodegradability and abundant short branches that can be functionalized. Because starch and GnG are both composed of glucose residues and have similar glucosidic bonds, GnG could be fabricated by sucrose phosphorylase, α-glucan phosphorylase, and branching enzymes from starch primers and sucrose. In this study, high-amylose starch, normal starch, and waxy corn starch were used as primers to synthesize GnG, and their impact on the fine structure of GnG was investigated. Structural analysis indicated that with increasing content of amylopectin in the starch primer, the proportion of short chains in GnG decreased, and the degree of β-amylolysis and α-amylolysis was enhanced. Amylose in the primer contributed to a compact and homogeneous structure of GnG, while amylopectin triggered the formation of branch points with a more open distribution. These findings provide a new strategy for regulating the fine structure of GnG.

Controlling the Fine Structure of Glycogen-like Glucan by Rational Enzymatic Synthesis

Glycogen-like glucan (GnG), a hyperbranched glucose polymer, has been receiving increasing attention to generate synthetic polymers and nanoparticles. Importantly, different branching patterns strongly influence the functionality of GnG. To uncover ways of obtaining different GnG branching patterns, a series of GnG with radius from 22.03 to 27.06 nm were synthesized using sucrose phosphorylase, α-glucan phosphorylase (GP), and branching enzyme (BE). Adjusting the relative activity ratio of GP and BE (GP/BE) made the molecular weight (MW) distribution of intermediate GnG products follow two different paths. At a low GP/BE, the GnG developed from "small to large" during the synthetic process, with the MW increasing from 6.15 × 10⁶ to 1.21 × 10⁷ g/mol, and possessed a compact structure. By contrast, a high GP/BE caused the "large to small" model, with the MW reduction of GnG from 1.62 × 10⁷ to 1.21 × 10⁷ g/mol, and created a loose external structure. The higher GP activity promoted the elongation of external chains and restrained chain transfer by the BE to the inner zone of GnG, which would modulate the loose-tight structure of GnG. These findings provide new useful insights into the construction of structurally well-defined nanoparticles.

Physicochemical properties of heat-moisture treated, stearic acid complexed starch: The effect of complexation time and temperature

Starch modification has been extensively studied to alter its physicochemical properties based on human needs. Lowering the digestion rate of starch is one of the interests in food science research, since when it is nutritionally improved, it can reduce the risk of human chronic diseases. In this study, heat-moisture treatment (HMT) followed by inclusion complexation with stearic acid at various temperatures and times was applied to improve the functional properties of starch. Thermal analysis suggested the formation of type I and type II complexes after complexation at 90 °C, indicated by a endothermal peak at 107 and 122 °C, respectively, while native starch after complexation only resulted in type I complexes. The formation of crystalline complexes was also confirmed by XRD showing peaks at 2θ = 13.1° and 20.1°. Furthermore, the modified starch displayed a higher pasting temperature, considerably less swelling and significantly lower viscosity behavior. This implied that the starch granules were thermally and mechanically more stable. The granular appearance of the modified starch was confirmed with light microscopy that presented more intact granules and less ruptured granules, even after heating to 90 °C. This study offers a way to upgrade the nutritional properties of starch.

A new way to improve physicochemical properties of potato starch

Starch is an important class of macromolecules for human nutrition. However, its rapid digestibility leads to a high amount of glucose released into the blood and contributes to a high risk of obesity and type II diabetes. For these reasons, Heat-moisture treatment (HMT) of the starch was applied prior to complexation with linoleic acid to obtain a desired physicochemical properties while preserving its granular structure. The thermal properties, analyzed by DSC, implied that the HMT enhanced the formation of amylose-linoleic acid complexes, particularly when the complexation was succeeded at 70 °C. The viscosity behavior studied by RVA demonstrated a higher pasting temperature and lower peak viscosity due to less swelling. The granule-like structure remained after complexation at 70 °C for 30 min and followed by RVA to 85 °C. The combination of the HMT and linoleic acid addition improved the stability of the starch granules towards heating and shearing.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2013-2014

This review is the eighth update of the original article published in 1999 on the application of Matrix-assisted laser desorption/ionization mass spectrometry (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2014. Topics covered in the first part of the review include general aspects such as theory of the MALDI process, matrices, derivatization, MALDI imaging, fragmentation, and arrays. The second part of the review is devoted to applications to various structural types such as oligo- and poly- saccharides, glycoproteins, glycolipids, glycosides, and biopharmaceuticals. Much of this material is presented in tabular form. The third part of the review covers medical and industrial applications of the technique, studies of enzyme reactions, and applications to chemical synthesis. © 2018 Wiley Periodicals, Inc. Mass Spec Rev 37:353-491, 2018.

Synthesis of New Hyperbranched α-Glucans from Sucrose by Lactobacillus reuteri 180 Glucansucrase Mutants

α-Glucans produced by glucansucrase enzymes of lactic acid bacteria attract strong attention as novel ingredients and functional biopolymers in the food industry. In the present study, α-helix 4 amino acid residues D1085, R1088, and N1089 of glucansucrase GTF180 of Lactobacillus reuteri 180 were targeted for mutagenesis both jointly and separately. Analysis of the mutational effects on enzyme function revealed that all D1085 and R1088 mutants catalyzed the synthesis of hyperbranched α-glucans with 15-22% branching (α1→3,6) linkages, compared to 13% in the wild-type GTF180. In addition, besides native (α1→6) and (α1→3) linkages, all of the mutations introduced a small amount of (α1→4) linkages (5% at most) in the polysaccharides produced. We conclude that α-helix 4 residues, especially D1085 and R1088, constituting part of the +2 acceptor binding subsite, are important determinants for the linkage specificity. The new hyperbranched α-glucans provide very interesting structural diversities and may find applications in the food industry.

Truncation of domain V of the multidomain glucansucrase GTF180 of Lactobacillus reuteri 180 heavily impairs its polysaccharide-synthesizing ability

Glucansucrases are exclusively found in lactic acid bacteria and synthesize a variety of α-glucans from sucrose. They are large multidomain enzymes belonging to the CAZy family 70 of glycoside hydrolase enzymes (GH70). The crystal structure of the N-terminal truncated GTF180 of Lactobacillus reuteri 180 (GTF180-ΔN) revealed that the polypeptide chain follows a U shape course to form five domains, including domains A, B, and C, which resemble those of family GH13 enzymes, and two extra and novel domains (domains IV and V), which are attached to the catalytic core. To elucidate the functional roles of domain V, we have deleted the domain V fragments from both the N- and C-terminal ends (GTF180-ΔNΔV). Truncation of domain V of GTF180-ΔN yielded a catalytically fully active enzyme but with heavily impaired polysaccharide synthesis ability. Instead, GTF180-ΔNΔV produced a large amount of oligosaccharides. Domain V is not involved in determining the linkage specificity, and the size of polysaccharide produced as the polysaccharide produced by GTF180-ΔNΔV was identical in size and structure with that of GTF180-ΔN. The data indicates that GTF180-ΔNΔV acts nonprocessively, frequently initiating synthesis of a new oligosaccharide from sucrose, instead of continuing the synthesis of a full size polysaccharide. Mutations L940E and L940F in GTF180-ΔNΔV, which are involved in the acceptor substrate binding, restored polysaccharide synthesis almost to the level of GTF180-ΔN. These results demonstrated that interactions of growing glucan chains with both domain V and acceptor substrate binding sites are important for polysaccharide synthesis.

Biocatalytic synthesis of maltodextrin-based acrylates from starch and α-cyclodextrin

Novel 2-(β-maltooligooxy)-ethyl (meth)acrylate monomers are successfully synthesized by CGTase from Bacillus macerans catalyzed coupling of 2-(β-glucosyloxy)-ethyl acrylate and methacrylate with α-cyclodextrin or starch. HPLC-UV analysis shows that the CGTase catalyzed reaction yields 2-(β-maltooligooxy)-ethyl acrylates with 1 to 15 glucopyranosyl units. (1) H NMR spectroscopy reveals that the β-linkage in the acceptor molecule is preserved during the CGTase catalyzed coupling reaction, whereas the newly introduced glucose units are attached by α-(1,4)-glycosidic linkages. The synthesized 2-(β-maltooligooxy)-ethyl acrylate monomers are successfully polymerized by aqueous free radical polymerization to yield the comb-shaped glycopolymer poly(2-(β-maltooligooxy)-ethyl acrylate).