Structure and selected functional properties of gamma-irradiated potato starch

Towards the preparation of sustainable superplasticizers for geopolymeric pastes via radiation-induced grafting of sulfonic group-bearing monomers onto corn starch

To address escalating environmental and sustainability concerns of petroleum-based superplasticizers (SPs), this work aims to develop sustainable and eco-friendly starch-based SPs using gamma radiation for maintaining the desired workability of geopolymeric pastes. Specifically, two green SPs were prepared from starch via radiation-induced grafting of two sulfonic group-bearing monomers, namely 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and 4-styrene sulfonic acid sodium salt (Na4SS). The grafting reaction was improved by initial modification of starch with glycidyl methacrylate to insert vinyl groups into the starch backbone. The modified starch samples were characterized by a variety of analytical techniques such as FTIR, 1H NMR, EDX, SLS, and viscometry. The prepared SPs exhibited high stability in aqueous 5 % NaOH. The effect of the prepared SPs on the fresh properties of GGBFS/MK geopolymer was studied using the mini slump test, zeta potential, adsorption capacity, and setting time. They significantly improved the paste flowability and dispersion compared to the control. Notably, the aromatic Na4SS-grafted starch displayed a comparable enhancement to the commercial PNS, while outperforming the aliphatic AMPS-grafted sample. This emphasizes the potential of these green SPs to address the challenges posed by the petroleum-based SPs and maximize the benefit of using starch as a green renewable resource.

Physicochemical Characteristics of Porous Starch Obtained by Combined Physical and Enzymatic Methods, Part 1: Structure, Adsorption, and Functional Properties

Porous starch can be applied as an adsorbent and encapsulant for bioactive substances in the food and pharmaceutical industries. By using appropriate modification methods (chemical, physical, enzymatic, or mixed), it is possible to create pores on the surface of the starch granules without disturbing their integrity. This paper aimed to analyze the possibility of obtaining a porous structure for native corn, potato, and pea starches using a combination of ultrasound, enzymatic digestion, and freeze-drying methods. The starch suspensions (30%, w/w) were treated with ultrasound (20 kHz, 30 min, 20 °C), then dried and hydrolyzed with amyloglucosidase (1000 U/g starch, 50 °C, 24 h, 2% starch suspension). After enzyme digestion, the granules were freeze-dried for 72 h. The structure of the native and modified starches were examined using VIS spectroscopy, SEM, ATR-FTIR, and LTNA (low-temperature nitrogen adsorption). Based on the electrophoretic mobility measurements of the starch granules using a laser Doppler velocimeter, zeta potentials were calculated to determine the surface charge level. Additionally, the selected properties such as the water and oil holding capacities, least gelling concentration (LGC), and paste clarity were determined. The results showed that the corn starch was the most susceptible to the combined modification methods and was therefore best suited for the production of porous starch.

Ionizing and nonionizing radiations can change physicochemical, technofunctional, and nutritional attributes of starch

Challenges for the food/non-food applications of starch mostly arise from its low stability against severe processing conditions (i.e. elevated temperatures, pH variations, intense shear forces), inordinate retrogradability, as well as restricted applicability. These drawbacks have been addressed through the modification of starch. The escalating awareness of individuals toward the presumptive side effects of chemical modification approaches has engrossed the attention of scientists to the development of physical modification procedures. In this regard, starch treatment via ionizing (i.e. gamma, electron beam, and X-rays) and non-ionizing (microwave, radiofrequency, infrared, ultraviolet) radiations has been introduced as a potent physical strategy offering new outstanding attributes to the modified product. Ionizing radiations, through dose-dependent pathways, are able to provoke depolymerization or cross-linking/grafting reactions to the starch medium. While non-ionizing radiations could modify the starch attributes by changing the morphology/architecture of granules and inducing reorientation/rearrangement in the molecular order of starch amorphous/crystalline fractions.

Physico-chemical properties and digestibility of native and citrate starches change in different ways by synchrotron radiation

The physico-chemical properties and digestibility of native and citrate cassava starches changed as a result of synchrotron radiation treatment. In this study, the native and citrate starch samples were exposed to radiation doses of 0.1, 0.4, 0.8 and 3.9 kGy. The granular morphology revealed that all samples were rupture and damage after radiation. As increasing radiation doses, the relative crystallinity as determined by WAXS and the ratio of 1047/1015 cm^-1 from FTIR result decreased while the degree of degradation and solubility increased for all samples. The swelling power of radiated native starches decreased with higher radiation doses indicating that the cross-linking of starch was induced by synchrotron radiation which was related to an increase in the resistant starch content. On the contrary, for radiated citrate samples, the FTIR peak at 1724 cm^-1 was observed. The ratio of 1724/2900 cm^-1 and total esterified citric acid did not change. The swelling and degree of di-esterification were reduced while the degree of mono-esterification increased with higher doses. It implied that the cross-linking by ester bonds was broken into mono-ester bonds. This work demonstrated that synchrotron radiation changed the physical and chemical properties of native and citrate starches in different ways.

Nonthermal physical modification of starch: An overview of recent research into structure and property alterations

To tailor the properties and enhance the applicability of starch, various ways of starch modification have been practiced. Among them, physical modification methods (micronization, nonthermal plasma, high-pressure, ultrasonication, pulsed electric field, and γ-irradiation) are highly potential for starch modification considering its safety, environmentally friendliness, and cost-effectiveness, without generating chemical wastes. Thus, this article provides an overview of the recent advances in nonthermal physical modification of starch and summarizes the resulting changes in the multi-level structures and physicochemical properties. While the effect of these techniques highly depends on starch type and treatment condition, they generally lead to the destruction of starch granules, the degradation of molecules, decreases in crystallinity, gelatinization temperatures, and viscosity, increases in solubility and swelling power, and an increase or decrease in digestibility, to different extents. The advantages and shortcomings of these techniques in starch processing are compared, and the knowledge gap in this area is commented on.

Gamma radiation as a modifier of starch – Physicochemical perspective

Starch is one of the most common and abundantly found carbohydrates in cereals, roots, legumes, and some fruits. It is a tasteless, colorless, and odorless source of energy that is present in the amyloplasts of plants. Native starch comprises amylose, a linear α-glucan having α-1,4-linkage and amylopectin, a branched polysaccharide with both α-1,4-linkage and α-1,6-linkage. Due to the low solubility, high viscosity, and unstable pasting property of native starch, it has been restricted from its application in industries. Although native starch has been widely used in various industries, modification of the same by various chemical, enzymatic and physical methods have been carried out to alter its properties for better performance in several industrial aspects. Physical modification like gamma radiation is frequently used as it is rapid, penetrates deeper, less toxic, and cost-effective. Starch when irradiated with gamma rays is observed to produce free radicals, generate sugars owing to cleavage of amylopectin branches, and exhibit variation in enzymatic digestion, amylose content, morphology, crystallinity, thermal property, and chemical composition. These physicochemical properties of the starch due to gamma radiation are assessed using optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and its application are discussed.

•

Assessment and comparison of morphological features of native and gamma-irradiated starch.

•

Investigation of crystallinity and structural type of crystalline domains through XRD.

•

FTIR spectroscopy confirmed the changes in chemical composition of gamma-irradiated and native starch.

•

DSC analysis revealed the changes in gelatinization temperature of gamma-irradiated and native starch.

Physicochemical properties of potato starch fermented by amylolytic Lactobacillus plantarum

This study investigated the effect of fermentation by Lactobacillus plantarum CGMCC 14177 strain on physicochemical properties and morphological characteristics of potato starch. The maximum total amylase and α-amylase production of L. plantarum CGMCC 14177 were 286.8 and 208.1 U/g, respectively. Fermented granules clearly exhibited pocked and dimpled surfaces. The granule properties changed to have a 1.9% increase in relative crystallinity. Overall the starch changed to have slight increases in onset and peak temperature, but resulted decreases of conclusion temperature and enthalpy. Fermentation decreased peak viscosity and breakdown value, while increased trough viscosity, final viscosity, and setback. Further analysis showed that fermentation increased the gel hardness and chewiness of the potato starch, but made little differences in the springiness, cohesiveness and resilience. Collectively, these results provide insight on how Lactobacillus strains can be used to modify the physicochemical properties of potato starch in ways that extend its use in industrial applications.

Cross-Linked Hydrophobic Starch Granules in Blends with PLA

The majority of native starch is used in the food sector and in the paper industry. Only a small amount is used in polymer engineering. One reason for the reluctance of the plastics processing industry to use starch as a filling material in polymer blends is the unsatisfactory mechanical behavior of starch when combined with thermoplastics. Another reason is the hydrophilicity of starch. In order to make these materials capable of competing, an amelioration of the mechanical properties is compulsory. By means of modifying the native starch and optimizing the compounding process, it is possible to improve the performance of starch blends, and, thus, increase the number of application areas of these materials. For this reason, native starch was modified with a cross-linking agent using a laboratory mixer. Subsequently, the modified starch and poly(lactic acid) were compounded using a co-rotating twin screw extruder. Cross-linking of the native starch in the laboratory mixer resulted in an increase in the mechanical strength of the starch blends. In addition, the blends with cross-linked starch displayed lower moisture absorption levels than blends with native starch as a filling material.