1
|
Zehra N, Ali TM, Mustafa G. Impact of hydroxypropylation coupled with extrusion treatment on the morphological, structural, and rheological properties of sorghum and corn starch. Int J Biol Macromol 2024; 277:134173. [PMID: 39067722 DOI: 10.1016/j.ijbiomac.2024.134173] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2023] [Revised: 07/20/2024] [Accepted: 07/24/2024] [Indexed: 07/30/2024]
Abstract
The purpose of the present study to prepare hydroxypropyl derivatives (HP) instant (partially cold-water swell-able) starches via extrusion technique (Ex) from sorghum and corn. The native and hydroxypropylated (at propylene level 5 % and 12 %) starch extrudates were evaluated for functional, structural, thermal and rheological properties. The development of extrudates provides ease to industries as they are easily soluble in aqueous mediums and does not require any prior heating. The degree of substitution (DS) for all extrudates varied between 0.0083 and 0.1530 which is under limit and save to consume. The X-ray diffraction (XRD) analysis revealed that all extrudates exhibited V-type pattern while the intensity of peaks increased due to hydroxypropylation. The starch extrudates showed gel-like behavior since storage modulus (G') was greater than loss modulus (G″). Non-Newtonian shear thinning behavior was observed for all extrudates. At lower temperature, HP-Ex at higher substitution level (12 %) demonstrated higher complex viscosity than native and low-substituted extrudates. Creep recovery of HP-Ex dispersion was more pronounced than native extrudates suggesting elastic nature of sorghum and corn starch extrudates. The differential scanning calorimetry (DSC) results revealed that HP-Ex were observed to gelatinize at lower temperatures and needed lower enthalpy of gelatinization (ΔHgel) because of their weakened structure after modification.
Collapse
Affiliation(s)
- Nusrat Zehra
- Department of Biomedical Engineering, Faculty of Engineering, Science, Technology and Management, Ziauddin University, Karachi, Pakistan.
| | - Tahira Mohsin Ali
- Department of Food Science and Technology, University of Karachi, 75270 Karachi, Pakistan
| | - Ghulam Mustafa
- Department of Physics, NED University of Engineering and Technology Karachi, Pakistan
| |
Collapse
|
2
|
Khodadadi Yazdi M, Seidi F, Hejna A, Zarrintaj P, Rabiee N, Kucinska-Lipka J, Saeb MR, Bencherif SA. Tailor-Made Polysaccharides for Biomedical Applications. ACS APPLIED BIO MATERIALS 2024; 7:4193-4230. [PMID: 38958361 PMCID: PMC11253104 DOI: 10.1021/acsabm.3c01199] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2023] [Revised: 05/28/2024] [Accepted: 05/28/2024] [Indexed: 07/04/2024]
Abstract
Polysaccharides (PSAs) are carbohydrate-based macromolecules widely used in the biomedical field, either in their pure form or in blends/nanocomposites with other materials. The relationship between structure, properties, and functions has inspired scientists to design multifunctional PSAs for various biomedical applications by incorporating unique molecular structures and targeted bulk properties. Multiple strategies, such as conjugation, grafting, cross-linking, and functionalization, have been explored to control their mechanical properties, electrical conductivity, hydrophilicity, degradability, rheological features, and stimuli-responsiveness. For instance, custom-made PSAs are known for their worldwide biomedical applications in tissue engineering, drug/gene delivery, and regenerative medicine. Furthermore, the remarkable advancements in supramolecular engineering and chemistry have paved the way for mission-oriented biomaterial synthesis and the fabrication of customized biomaterials. These materials can synergistically combine the benefits of biology and chemistry to tackle important biomedical questions. Herein, we categorize and summarize PSAs based on their synthesis methods, and explore the main strategies used to customize their chemical structures. We then highlight various properties of PSAs using practical examples. Lastly, we thoroughly describe the biomedical applications of tailor-made PSAs, along with their current existing challenges and potential future directions.
Collapse
Affiliation(s)
- Mohsen Khodadadi Yazdi
- Division
of Electrochemistry and Surface Physical Chemistry, Faculty of Applied
Physics and Mathematics, Gdańsk University
of Technology, Narutowicza
11/12, 80-233 Gdańsk, Poland
- Advanced
Materials Center, Gdańsk University
of Technology, Narutowicza
11/12, 80-233 Gdańsk, Poland
| | - Farzad Seidi
- Jiangsu
Co−Innovation Center for Efficient Processing and Utilization
of Forest Resources and International Innovation Center for Forest
Chemicals and Materials, Nanjing Forestry
University, Nanjing 210037, China
| | - Aleksander Hejna
- Institute
of Materials Technology, Poznan University
of Technology, PL-61-138 Poznań, Poland
| | - Payam Zarrintaj
- School
of Chemical Engineering, Oklahoma State
University, 420 Engineering
North, Stillwater, Oklahoma 74078, United States
| | - Navid Rabiee
- Department
of Biomaterials, Saveetha Dental College and Hospitals, SIMATS, Saveetha University, Chennai 600077, India
| | - Justyna Kucinska-Lipka
- Department
of Polymer Technology, Faculty of Chemistry, Gdańsk University of Technology, 80-233 Gdańsk, Poland
| | - Mohammad Reza Saeb
- Department
of Pharmaceutical Chemistry, Medical University
of Gdańsk, J.
Hallera 107, 80-416 Gdańsk, Poland
| | - Sidi A. Bencherif
- Chemical
Engineering Department, Northeastern University, Boston, Massachusetts 02115, United States
- Department
of Bioengineering, Northeastern University, Boston, Massachusetts 02115, United States
- Harvard
John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138, United States
| |
Collapse
|
3
|
Du Z, Li X, Zhao X, Huang Q. Multi-scale structural disruption induced by radio frequency air cold plasma accelerates enzymatic hydrolysis/ hydroxypropylation of tapioca starch. Int J Biol Macromol 2024; 260:129572. [PMID: 38253141 DOI: 10.1016/j.ijbiomac.2024.129572] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2023] [Revised: 12/27/2023] [Accepted: 01/16/2024] [Indexed: 01/24/2024]
Abstract
This study investigated the effects of radio frequency air cold plasma (RFACP) pretreatment on the multi-scale structures, physicochemical properties, enzymatic hydrolysis, and hydroxypropylation of tapioca starch. The results showed that cold plasma (CP) made starch granules rough on the surface and disrupted long- and short-range ordered structures, reducing relative crystallinity from 43.8 % to 37.4 % and R1047/1022 value from 0.992 to 0.934. Meanwhile, the starch molecules were depolymerized and oxidized by CP, reducing weight-average molecular weight from 9.64 × 107 to 2.17 × 107 g/mol, while increasing carbonyl and carboxyl groups by up to 118 % and 53 %. Additionally, CP-treated starches exhibited higher solubility and swelling power, along with lower gelatinization enthalpy. Short-time CP pretreatment (10 min) promoted the hydroxypropylation of starch and increased the molar substitution (0.081-0.112). Also, CP pretreatment accelerated enzymatic hydrolysis of starch, as indicated by the increase in hydrolysis rate (1.846 × 10-3-2.033 × 10-3 min-1) and degree of hydrolysis (51.45 % - 59.92 %). Overall, the multi-scale structural disruption induced by CP treatment facilitated the accessibility of enzymes/chemical reagents into starch granules and glucan chains. This study suggested that RFACP could be used for starch pretreatment to increase production efficiency in modified starch production, as well as in brewing and fermentation industries.
Collapse
Affiliation(s)
- Zhixiang Du
- College of Food Science and Technology, MOE Key Laboratory of Environment Correlative Dietology, Huazhong Agricultural University, Wuhan 430070, China
| | - Xuxu Li
- College of Food Science and Technology, MOE Key Laboratory of Environment Correlative Dietology, Huazhong Agricultural University, Wuhan 430070, China
| | - Xiaoyun Zhao
- College of Food Science and Technology, MOE Key Laboratory of Environment Correlative Dietology, Huazhong Agricultural University, Wuhan 430070, China
| | - Qilin Huang
- College of Food Science and Technology, MOE Key Laboratory of Environment Correlative Dietology, Huazhong Agricultural University, Wuhan 430070, China.
| |
Collapse
|
4
|
Chen L, Tan H, Feng R, Ma L, Zhang Y, Yi H, Yin L, Liu W, Hu L, Zhu W. Effect of modified starches on the quality of skins of glutinous rice dumplings. Int J Biol Macromol 2023; 253:127139. [PMID: 37793518 DOI: 10.1016/j.ijbiomac.2023.127139] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2023] [Revised: 09/17/2023] [Accepted: 09/27/2023] [Indexed: 10/06/2023]
Abstract
This study aimed to investigate the influence of modified starches on the quality of skins of glutinous rice dumplings (SGRDs), including changes in textural properties, pasting parameters, microstructure, color, transparency, and sensory quality. The results showed that the addition of a single acetylated-modified cassava or potato starch or composite modified cassava and potato starch in a ratio of 2:1 can improve the quality of SGRDs. The springiness and lightness of SGRDs increased, and the transparency increased from 3.22 % to 6.18 %. The cooked samples had delicate mouth-feel, uniform color and luster, good transparency, no depression, and low weight loss and did not stick to the teeth. Moreover, the total consumer acceptability score increased from 60.67 to 89.33, indicating that these products were widely accepted by consumers. However, the addition of hydroxypropyl-modified cassava starch or its composite with other two modified starches had no apparent effect on the quality of SGRDs. In conclusion, the quality of SGRDs were significantly improved by the addition of single or composite acetylated-modified starches. This study provides a theoretical basis for improving the quality of SGRDs.
Collapse
Affiliation(s)
- Lu Chen
- Faculty of Agriculture, Forestry and Food Engineering, Yibin University, Yibin 643000, China; Solid-state Fermentation Resource Utilization Key Laboratory of Sichuan Province, Yibin 643000, China; Sichuan Province Engineering Technology Research Center of Oil Cinnamon, Yibin 643000, China
| | - Hongxia Tan
- College of Food Science, Southwest University, Chongqing 400715, China
| | - Ruizhang Feng
- Faculty of Agriculture, Forestry and Food Engineering, Yibin University, Yibin 643000, China; Sichuan Province Engineering Technology Research Center of Oil Cinnamon, Yibin 643000, China
| | - Liang Ma
- College of Food Science, Southwest University, Chongqing 400715, China
| | - Yuhao Zhang
- College of Food Science, Southwest University, Chongqing 400715, China
| | - Haitao Yi
- Faculty of Agriculture, Forestry and Food Engineering, Yibin University, Yibin 643000, China
| | - Liguo Yin
- Faculty of Agriculture, Forestry and Food Engineering, Yibin University, Yibin 643000, China; Solid-state Fermentation Resource Utilization Key Laboratory of Sichuan Province, Yibin 643000, China
| | - Wenwen Liu
- Faculty of Agriculture, Forestry and Food Engineering, Yibin University, Yibin 643000, China; Sichuan Province Engineering Technology Research Center of Oil Cinnamon, Yibin 643000, China
| | - Lianqing Hu
- Faculty of Agriculture, Forestry and Food Engineering, Yibin University, Yibin 643000, China; Sichuan Province Engineering Technology Research Center of Oil Cinnamon, Yibin 643000, China
| | - Wenyou Zhu
- Solid-state Fermentation Resource Utilization Key Laboratory of Sichuan Province, Yibin 643000, China.
| |
Collapse
|
5
|
Huang J, Cao Y, Ding S. Preparation of grafted starch by IPDI coupling and its antibacterial properties. Biomaterials 2023; 301:122214. [PMID: 37406600 DOI: 10.1016/j.biomaterials.2023.122214] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2022] [Revised: 04/23/2023] [Accepted: 06/23/2023] [Indexed: 07/07/2023]
Abstract
Antibacterial acetate grafted starch (AGS) was synthesized by isophorone diisocyanate (IPDI) coupling acetate esterified starch (AST) and the antimicrobial agent polyhexamethyleneguanidine hydrochloride (PHMG), and the antimicrobial properties of AGS were evaluated. The process parameters of AGS were: IPDI reacted with PHMG at 120 °C for 1 h, then, reacted with starch at 60 °C for 3 h. The grafting yield of PHMG and starch reached 28.43%. The Fourier transform infrared spectroscopy (FTIR) and Nuclear magnetic resonance (1H NMR) showed that the binding of IPDI to PHMG was successfully grafted on the AS. The antibacterial effect of AGS was investigated. AGS produced inhibition zones and confirmed its significant inhibitory effect on Escherichia coli and Staphylococcus aureus, as the grafting yield increased, the inhibition effect on bacteria became stronger. When the grafting yield was 28.43%, the inhibition rate of AGS was 90.24% for Escherichia coli. and 94.45% for Staphylococcus aureus. The experiments of water washing showed that after AGS was washed 10 times with water, the inhibition rate of AGS to E. coli. only reduced 3.04% and that of S. aureus 2.95%, indicating that the combination of PHMG and starch was stable and the inhibition effect was long-lasting, AGS has huge potential to be developed into antibacterial material.
Collapse
Affiliation(s)
- Jingao Huang
- College of Food Science and Technology, Huazhong Agricultural University, Wuhan, Hubei, 430070, China
| | - Yaqi Cao
- College of Food Science and Technology, Huazhong Agricultural University, Wuhan, Hubei, 430070, China
| | - Shiyong Ding
- College of Food Science and Technology, Huazhong Agricultural University, Wuhan, Hubei, 430070, China.
| |
Collapse
|
6
|
Chen L, Zhao N, McClements DJ, Hamaker BR, Miao M. Advanced dendritic glucan-derived biomaterials: From molecular structure to versatile applications. Compr Rev Food Sci Food Saf 2023; 22:4107-4146. [PMID: 37350042 DOI: 10.1111/1541-4337.13201] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/19/2022] [Revised: 05/30/2023] [Accepted: 06/05/2023] [Indexed: 06/24/2023]
Abstract
There is considerable interest in the development of advanced biomaterials with improved or novel functionality for diversified applications. Dendritic glucans, such as phytoglycogen and glycogen, are abundant biomaterials with highly branched three-dimensional globular architectures, which endow them with unique structural and functional attributes, including small size, large specific surface area, high water solubility, low viscosity, high water retention, and the availability of numerous modifiable surface groups. Dendritic glucans can be synthesized by in vivo biocatalysis reactions using glucosyl-1-phosphate as a substrate, which can be obtained from plant, animal, or microbial sources. They can also be synthesized by in vitro methods using sucrose or starch as a substrate, which may be more suitable for large-scale industrial production. The large numbers of hydroxyl groups on the surfaces of dendritic glucan provide a platform for diverse derivatizations, including nonreducing end, hydroxyl functionalization, molecular degradation, and conjugation modifications. Due to their unique physicochemical and functional attributes, dendritic glucans have been widely applied in the food, pharmaceutical, biomedical, cosmetic, and chemical industries. For instance, they have been used as delivery systems, adsorbents, tissue engineering scaffolds, biosensors, and bioelectronic components. This article reviews progress in the design, synthesis, and application of dendritic glucans over the past several decades.
Collapse
Affiliation(s)
- Long Chen
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, China
| | - Ningjing Zhao
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, China
| | - David J McClements
- Department of Food Science, University of Massachusetts, Amherst, Massachusetts, USA
| | - Bruce R Hamaker
- Whistler Center for Carbohydrate Research, Purdue University, West Lafayette, Indiana, USA
| | - Ming Miao
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi, China
| |
Collapse
|
7
|
Alfaro-Diaz A, Escobedo A, Luna-Vital DA, Castillo-Herrera G, Mojica L. Common beans as a source of food ingredients: Techno-functional and biological potential. Compr Rev Food Sci Food Saf 2023; 22:2910-2944. [PMID: 37182216 DOI: 10.1111/1541-4337.13166] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/16/2023] [Revised: 03/27/2023] [Accepted: 04/16/2023] [Indexed: 05/16/2023]
Abstract
Common beans are an inexpensive source of high-quality food ingredients. They are rich in proteins, slowly digestible starch, fiber, phenolic compounds, and other bioactive molecules that could be separated and processed to obtain value-added ingredients with techno-functional and biological potential. The use of common beans in the food industry is a promising alternative to add nutritional and functional ingredients with a low impact on overall consumer acceptance. Researchers are evaluating traditional and novel technologies to develop functionally enhanced common bean ingredients, such as flours, proteins, starch powders, and phenolic extracts that could be introduced as functional ingredient alternatives in the food industry. This review compiles recent information on processing, techno-functional properties, food applications, and the biological potential of common bean ingredients. The evidence shows that incorporating an adequate proportion of common bean ingredients into regular foods such as pasta, bread, or nutritional bars improves their fiber, protein, phenolic compounds, and glycemic index profile without considerably affecting their organoleptic properties. Additionally, common bean consumption has shown health benefits in the gut microbiome, weight control, and the reduction of the risk of developing noncommunicable diseases. However, food matrix interaction studies and comprehensive clinical trials are needed to develop common bean ingredient applications and validate the health benefits over time.
Collapse
Affiliation(s)
- Arturo Alfaro-Diaz
- Tecnología Alimentaria, Centro de Investigación y Asistencia en Tecnología y Diseño del Estado de Jalisco, Guadalajara, México
| | - Alejandro Escobedo
- Tecnología Alimentaria, Centro de Investigación y Asistencia en Tecnología y Diseño del Estado de Jalisco, Guadalajara, México
| | - Diego A Luna-Vital
- Tecnologico de Monterrey, The Institute for Obesity Research, Monterrey, Mexico
| | - Gustavo Castillo-Herrera
- Tecnología Alimentaria, Centro de Investigación y Asistencia en Tecnología y Diseño del Estado de Jalisco, Guadalajara, México
| | - Luis Mojica
- Tecnología Alimentaria, Centro de Investigación y Asistencia en Tecnología y Diseño del Estado de Jalisco, Guadalajara, México
| |
Collapse
|
8
|
Xie Q, Liu X, Liu H, Zhang Y, Xiao S, Ding W, Lyu Q, Fu Y, Wang X. Insight into the effect of garlic peptides on the physicochemical and anti-staling properties of wheat starch. Int J Biol Macromol 2023; 229:363-371. [PMID: 36581041 DOI: 10.1016/j.ijbiomac.2022.12.253] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/13/2022] [Revised: 12/20/2022] [Accepted: 12/22/2022] [Indexed: 12/28/2022]
Abstract
The staling of wheat starch in storage seriously damages the quality of starch-based foods, and how to delay the staling has become a topic focus. To solve the problem, this study analyzed the effect of garlic peptides on the physical and retrogradation behaviors of wheat starch during storage. The rheological, pasting, swelling properties, molecular order, water migration, and microstructure of wheat starch gels were evaluated. Our results showed that garlic peptides effectively reduced the storage and loss modulus of wheat starch. The physical properties indicated that garlic peptides suppressed the swelling and gelatinization of starch, which exhibited higher water holding capacity and lower water migration. In addition, garlic peptides incorporated wheat starch exhibited the lowest gel hardness during storage. X-ray diffraction and Fourier Transform Infrared Spectroscopy analysis indicated that garlic peptides could reduce the crystallinity and inhibit the formation of ordered structures in wheat starch gel. The microstructure observation showed that the gel with garlic peptides maintained the integrity of the network structure. Consequently, garlic peptides are expected to be an effective natural additive to inhibit starch staling and provide new insights for starch-based foods.
Collapse
Affiliation(s)
- Qianran Xie
- Key Laboratory for Deep Processing of Major Grain and Oil, Wuhan Polytechnic University, Ministry of Education, Wuhan 430023, China; Hubei Key Laboratory for Processing and Transformation of Agricultural Products, Wuhan Polytechnic University, Wuhan 430023, China
| | - Xiaorong Liu
- Key Laboratory for Deep Processing of Major Grain and Oil, Wuhan Polytechnic University, Ministry of Education, Wuhan 430023, China; Hubei Key Laboratory for Processing and Transformation of Agricultural Products, Wuhan Polytechnic University, Wuhan 430023, China
| | - Hongyan Liu
- Key Laboratory for Deep Processing of Major Grain and Oil, Wuhan Polytechnic University, Ministry of Education, Wuhan 430023, China; Hubei Key Laboratory for Processing and Transformation of Agricultural Products, Wuhan Polytechnic University, Wuhan 430023, China
| | - Yuting Zhang
- Key Laboratory for Deep Processing of Major Grain and Oil, Wuhan Polytechnic University, Ministry of Education, Wuhan 430023, China; Hubei Key Laboratory for Processing and Transformation of Agricultural Products, Wuhan Polytechnic University, Wuhan 430023, China
| | - Shensheng Xiao
- Key Laboratory for Deep Processing of Major Grain and Oil, Wuhan Polytechnic University, Ministry of Education, Wuhan 430023, China; Hubei Key Laboratory for Processing and Transformation of Agricultural Products, Wuhan Polytechnic University, Wuhan 430023, China
| | - Wenping Ding
- Key Laboratory for Deep Processing of Major Grain and Oil, Wuhan Polytechnic University, Ministry of Education, Wuhan 430023, China; Hubei Key Laboratory for Processing and Transformation of Agricultural Products, Wuhan Polytechnic University, Wuhan 430023, China
| | - Qingyun Lyu
- Key Laboratory for Deep Processing of Major Grain and Oil, Wuhan Polytechnic University, Ministry of Education, Wuhan 430023, China; Hubei Key Laboratory for Processing and Transformation of Agricultural Products, Wuhan Polytechnic University, Wuhan 430023, China
| | - Yang Fu
- Key Laboratory for Deep Processing of Major Grain and Oil, Wuhan Polytechnic University, Ministry of Education, Wuhan 430023, China; Hubei Key Laboratory for Processing and Transformation of Agricultural Products, Wuhan Polytechnic University, Wuhan 430023, China.
| | - Xuedong Wang
- Key Laboratory for Deep Processing of Major Grain and Oil, Wuhan Polytechnic University, Ministry of Education, Wuhan 430023, China; Hubei Key Laboratory for Processing and Transformation of Agricultural Products, Wuhan Polytechnic University, Wuhan 430023, China.
| |
Collapse
|
9
|
Pan W, Liang Q, Gao Q. Preparation of hydroxypropyl starch/polyvinyl alcohol composite nanofibers films and improvement of hydrophobic properties. Int J Biol Macromol 2022; 223:1297-1307. [PMID: 36395934 DOI: 10.1016/j.ijbiomac.2022.11.114] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/25/2022] [Revised: 10/19/2022] [Accepted: 11/11/2022] [Indexed: 11/16/2022]
Abstract
Starch-derived edible films have great potential as biodegradable food packaging and biomedical materials, in this study, we adopted a green method to prepare starch-based composite electrospun nanofibers films. The hydroxypropyl starches (HPS) were prepared to improve native starch solubility and properties, and a series of blend solutions were prepared with different HPS/polyvinyl alcohol (PVA) weight ratios. The comparison of the properties of HPS/PVA (HPA) nanofibers with different amylose contents were evaluated, and the fibers fabricated from hydroxypropyl high amylose starch (HP-HAS) had more continuous and homogeneous morphologies compared to the other starch fibers, it was also found that the addition of HP-HAS in the film has better mechanical properties than pure PVA film. Thus, to improve the hydrophobicity of the film, the HP-HAS/PVA (HPA(H)) nanofiber was selected for the hydrophobic study by the citric acid (CA) treatment. The hydrophobic surface was formed on the HPA(H) film by CA self-assembled coating with a water contact angle changed from 30.95° up to 100.74°. This study successfully prepared the modified starch/PVA composite nanofibers and established a simple method of self-assembled hydrophobic modification to improve water stability. Therefore, this green strategy is an alternative candidate in further study for food packaging and relative areas.
Collapse
Affiliation(s)
- Wenli Pan
- Carbohydrate Laboratory, School of Food Science and Engineering, South China University of Technology, Guangzhou 510640, PR China; Guangdong Province Key Laboratory for Green Processing of Natural Products and Product Safety, Guangzhou 510640, PR China
| | - Qian Liang
- Carbohydrate Laboratory, School of Food Science and Engineering, South China University of Technology, Guangzhou 510640, PR China; Guangdong Province Key Laboratory for Green Processing of Natural Products and Product Safety, Guangzhou 510640, PR China
| | - Qunyu Gao
- Carbohydrate Laboratory, School of Food Science and Engineering, South China University of Technology, Guangzhou 510640, PR China; Guangdong Province Key Laboratory for Green Processing of Natural Products and Product Safety, Guangzhou 510640, PR China.
| |
Collapse
|
10
|
Gong Y, Gu T, Zhang T, Li S, Yu Z, Zheng M, Xiao Y, Zhou Y. Effects of Hydroxypropyl and Lactate Esterified Glutinous Rice Starch on Wheat Starch Gel Construction. Gels 2022; 8:714. [PMID: 36354621 PMCID: PMC9690041 DOI: 10.3390/gels8110714] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2022] [Revised: 10/28/2022] [Accepted: 10/31/2022] [Indexed: 11/06/2022] Open
Abstract
An investigation was conducted into the impacts of hydroxypropyl glutinous rice starch (HPGRS) and lactate-esterified glutinous rice starch (LAEGRS) on a dilute solution and gel properties of wheat starch (WS) at different proportions (0%, 1%, 3%, 5%, and 10%). The results of dilute solution viscosity showed that hydroxypropyl treatment of glutinous rice starch (GRS) could promote the extension of GRS chains, while lactate esterification led to the hydrophobic association of GRS chains, and the starch chains curled inward. Different HPGRS: WS and LAEGRS: WS ratios, β > 0 and ∆b > 0, showed HPGRS and LAEGRS produced attractive forces with WS and formed a uniform gel structure. Compared with WS gel, HPGRS, and LAEGRS could effectively delay the short-term aging of WS gels, and LAEGRS had a more significant effect. HPGRS increased the pasting viscosity, viscoelasticity, and springiness of WS gels, reduced the free water content, and established a tighter gel network structure, while LAEGRS had an opposite trend on WS. In conclusion, HPGRS was suitable for WS-based foods with stable gel network structure and high water retention requirements, and LAEGRS was suitable for WS-based foods with low viscosity and loose gel structure.
Collapse
Affiliation(s)
- Yongqiang Gong
- Anhui Engineering Laboratory for Agro-Products Processing, Food Processing Research Institute, School of Tea and Food Science & Technology, Anhui Agricultural University, Hefei 230036, China
| | - Tingting Gu
- Anhui Engineering Laboratory for Agro-Products Processing, Food Processing Research Institute, School of Tea and Food Science & Technology, Anhui Agricultural University, Hefei 230036, China
| | - Tiantian Zhang
- Anhui Engineering Laboratory for Agro-Products Processing, Food Processing Research Institute, School of Tea and Food Science & Technology, Anhui Agricultural University, Hefei 230036, China
| | - Songnan Li
- Joint International Research Laboratory of Agriculture and Agri-Product Safety of the Ministry of Education of China, Institutes of Agricultural Science and Technology Development, Yangzhou University, Yangzhou 225009, China
| | - Zhenyu Yu
- Anhui Engineering Laboratory for Agro-Products Processing, Food Processing Research Institute, School of Tea and Food Science & Technology, Anhui Agricultural University, Hefei 230036, China
| | - Mingming Zheng
- Anhui Engineering Laboratory for Agro-Products Processing, Food Processing Research Institute, School of Tea and Food Science & Technology, Anhui Agricultural University, Hefei 230036, China
| | - Yaqing Xiao
- Anhui Engineering Laboratory for Agro-Products Processing, Food Processing Research Institute, School of Tea and Food Science & Technology, Anhui Agricultural University, Hefei 230036, China
| | - Yibin Zhou
- Anhui Engineering Laboratory for Agro-Products Processing, Food Processing Research Institute, School of Tea and Food Science & Technology, Anhui Agricultural University, Hefei 230036, China
| |
Collapse
|
11
|
Yashini M, Khushbu S, Madhurima N, Sunil CK, Mahendran R, Venkatachalapathy N. Thermal properties of different types of starch: A review. Crit Rev Food Sci Nutr 2022; 64:4373-4396. [PMID: 36322685 DOI: 10.1080/10408398.2022.2141680] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
Starch is present in high amount in various cereals, fruits and roots & tubers which finds major application in industry. Commercially, starch is rarely consumed or processed in its native form, thus modification of starch is widely used method for increasing its application and process stability. Due to the high demand for starch in industrial applications, researchers were driven to hunt for new sources of starch, including modification of starch through green processing. Thermal properties are significant reference parameters for evaluating the quality of starch when it comes to cooking and processing. Modification of starches affects the thermal properties, which are widely studied using Differential scanning calorimeter or Thermogravimetric analysis. It could lead to a better understanding of starch's thermal properties including factors influencing and expand its commercial applications as a thickener, extender, fat replacer, etc. in more depth. Therefore, the review presents the classification of starches, factors influencing the thermal properties, measurement methods and thermal properties of starch in its native and modified form. Further, this review concludes that extensive research on the thermal properties of new sources of starch, as well as modified starch, is required to boost thermal stability and extend industrial applications.
Collapse
Affiliation(s)
- M Yashini
- Department of Food Engineering, National Institute of Food Technology Entrepreneurship and Management-Thanjavur, Thanjavur, India
| | - S Khushbu
- University of Hohenheim, Stuttgart, Germany
| | - N Madhurima
- Department of Food Engineering, National Institute of Food Technology Entrepreneurship and Management-Thanjavur, Thanjavur, India
| | - C K Sunil
- Department of Food Engineering, National Institute of Food Technology Entrepreneurship and Management-Thanjavur, Thanjavur, India
| | - R Mahendran
- Centre of Excellence in Non-Thermal Processing, National Institute of Food Technology Entrepreneurship and Management-Thanjavur, Thanjavur, India
| | - N Venkatachalapathy
- Department of Food Engineering, National Institute of Food Technology Entrepreneurship and Management-Thanjavur, Thanjavur, India
| |
Collapse
|
12
|
Miller K, Reichert CL, Schmid M, Loeffler M. Physical, Chemical and Biochemical Modification Approaches of Potato (Peel) Constituents for Bio-Based Food Packaging Concepts: A Review. Foods 2022; 11:foods11182927. [PMID: 36141054 PMCID: PMC9498702 DOI: 10.3390/foods11182927] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/30/2022] [Revised: 09/05/2022] [Accepted: 09/05/2022] [Indexed: 11/30/2022] Open
Abstract
Potatoes are grown in large quantities and are mainly used as food or animal feed. Potato processing generates a large amount of side streams, which are currently low value by-products of the potato processing industry. The utilization of the potato peel side stream and other potato residues is also becoming increasingly important from a sustainability point of view. Individual constituents of potato peel or complete potato tubers can for instance be used for application in other products such as bio-based food packaging. Prior using constituents for specific applications, their properties and characteristics need to be known and understood. This article extensively reviews the scientific literature about physical, chemical, and biochemical modification of potato constituents. Besides short explanations about the modification techniques, extensive summaries of the results from scientific articles are outlined focusing on the main constituents of potatoes, namely potato starch and potato protein. The effects of the different modification techniques are qualitatively interpreted in tables to obtain a condensed overview about the influence of different modification techniques on the potato constituents. Overall, this article provides an up-to-date and comprehensive overview of the possibilities and implications of modifying potato components for potential further valorization in, e.g., bio-based food packaging.
Collapse
Affiliation(s)
- Katharina Miller
- Research Group: Meat Technology & Science of Protein-Rich Foods (MTSP), Department of Microbial and Molecular Systems, Leuven Food Science and Nutrition Research Centre, KU Leuven Ghent Technology Campus, B-9000 Ghent, Belgium or
- Sustainable Packaging Institute SPI, Faculty of Life Sciences, Albstadt-Sigmaringen University, 72488 Sigmaringen, Germany
| | - Corina L. Reichert
- Sustainable Packaging Institute SPI, Faculty of Life Sciences, Albstadt-Sigmaringen University, 72488 Sigmaringen, Germany
| | - Markus Schmid
- Sustainable Packaging Institute SPI, Faculty of Life Sciences, Albstadt-Sigmaringen University, 72488 Sigmaringen, Germany
| | - Myriam Loeffler
- Research Group: Meat Technology & Science of Protein-Rich Foods (MTSP), Department of Microbial and Molecular Systems, Leuven Food Science and Nutrition Research Centre, KU Leuven Ghent Technology Campus, B-9000 Ghent, Belgium or
- Correspondence: ; Tel.: +32-9-3102553
| |
Collapse
|
13
|
Tappiban P, Zhao J, Zhang Y, Gao Y, Zhang L, Bao J. Effects of single and dual modifications through electron beam irradiation and hydroxypropylation on physicochemical properties of potato and corn starches. Int J Biol Macromol 2022; 220:1579-1588. [PMID: 36113603 DOI: 10.1016/j.ijbiomac.2022.09.091] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/23/2022] [Revised: 08/16/2022] [Accepted: 09/10/2022] [Indexed: 11/18/2022]
Abstract
In this study, electron beam irradiation (EBI; 2, 4, 6, 8 and 10 kGy), hydroxypropylation (HP) and dual modification of EBI-HP were applied to modify corn and potato starches. The results showed that the molar substitution (MS) of EBI-HP modified corn and potato starches were in the range of 0.060-0.087 and 0.080-0.124, respectively. After modifications, amylose content of corn (30.0 %) and potato (31.2 %) starches were declined to 24.2-28.1 % and 26.1-29.5 %, respectively, and relative crystallinity was reduced from 35.5 to 30.0 % for corn and 34.1 to 20.2 % for potato. Pasting properties decreased significantly in both starch sources with increasing irradiation dose. EBI decreased springiness, enthalpy of retrograded starch (ΔHr) and percentage of retrogradation (R%) on corn starches, which were different from those effects observed on potato starches. Meanwhile, HP increased peak viscosity up to 312.6 RVU and 1359.3 RVU for corn and potato starches, respectively. Moreover, EBI-HP was highly responsible for the decreases in the textural, gelatinization and retrogradation properties and relative crystallinity in both corn and potato starches. These results enhance the understanding of starch functionality modified by using both physical and chemical methods, and provide further insights on food and non-food applications.
Collapse
Affiliation(s)
- Piengtawan Tappiban
- Institute of Nuclear Agricultural Sciences, College of Agriculture and Biotechnology, Zhejiang University, Zijingang Campus, Hangzhou 310058, China.
| | - Jiajia Zhao
- Institute of Nuclear Agricultural Sciences, College of Agriculture and Biotechnology, Zhejiang University, Zijingang Campus, Hangzhou 310058, China
| | - Yu Zhang
- Institute of Nuclear Agricultural Sciences, College of Agriculture and Biotechnology, Zhejiang University, Zijingang Campus, Hangzhou 310058, China
| | - Yan Gao
- Hainan Institute of Zhejiang University, Yazhou Bay Science and Technology City, Yazhou District, Sanya 572025, China
| | - Lin Zhang
- Hainan Institute of Zhejiang University, Yazhou Bay Science and Technology City, Yazhou District, Sanya 572025, China
| | - Jinsong Bao
- Institute of Nuclear Agricultural Sciences, College of Agriculture and Biotechnology, Zhejiang University, Zijingang Campus, Hangzhou 310058, China; Hainan Institute of Zhejiang University, Yazhou Bay Science and Technology City, Yazhou District, Sanya 572025, China.
| |
Collapse
|
14
|
Han H, Jiao Y, Chang Y, Cheng Y, Shi L. Glycosylation of Zein Hydrolysate as a Nanocarrier for Lutein Delivery: Preparation and Stability. Front Pharmacol 2022; 13:905059. [PMID: 35586048 PMCID: PMC9108384 DOI: 10.3389/fphar.2022.905059] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/26/2022] [Accepted: 04/19/2022] [Indexed: 11/13/2022] Open
Abstract
Lutein is a functional carotenoid that has a wide range of physiological benefits in humans. However, it easily degrades and becomes inactivated during storage and processing, resulting in low bioavailability. The development of new nanocarriers can effectively improve the stability and biological activity of lutein. In this study, zein hydrolysate (ZH) carriers were glycosylated with glucosamine (GLU) under the action of transglutaminase, and lutein-loaded glycosylated ZH nanoparticles (GZH-LUT) were constructed by liquid–liquid dispersion. The results showed that the GZH-LUT particles had a narrow size distribution in the range of 200–300 nm and a decreased zeta potential and polydispersity index. In particular, GZH trapped lutein more efficiently than ZH. In addition, GZH-LUT had better physical and chemical properties, including better water solubility, oxidative stability, and environmental stability than free lutein and ZH-LUT. These results indicate that glycosylated zein hydrolysate has the potential to be used as a novel protein-based nanocarrier to enhance the solubility and stability of lutein, which can further improve its bioavailability.
Collapse
|
15
|
Shang M, Liu W, Chen L, Chen M, Zhong F. Revealing substitution priority and pattern of octenylsuccinic groups along the starch chain under a continuous mode. Food Chem 2022; 388:132909. [PMID: 35447580 DOI: 10.1016/j.foodchem.2022.132909] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2021] [Revised: 03/22/2022] [Accepted: 04/04/2022] [Indexed: 11/18/2022]
Abstract
Octenylsuccinic (OS) groups distribution was considered random under traditional batch mode (BM) process due to excessive available octenyl succinic anhydride (OSA) at early stage, making the functionality optimization of OSA starch under restricted substitution degree (DS) difficult. To reveal the priority rule of substituent position at starch molecular level, a continuous mode (CM, dropwise OSA addition) was applied for OSA starch preparation. Initial OSA substitution was predominately at the branching points of amylopectin backbone, then successive at the branching points of shorter and longer chains with increasing DS. As DS increased over 1.49%, substitution started occurring along the chains and moved towards the non-reducing ends until DS reached 6.65%. At similar DS, more branching point substitutions occurred at CM starch, showing superior emulsifying property over BM starch. OSA substitution priority rule does exist under controlled OSA supply, which would facilitate OSA starch design with specific substitution pattern and favored functionality.
Collapse
Affiliation(s)
- Mengshan Shang
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi 214122, China; Science Center for Future Foods, Jiangnan University, Wuxi 214122, China; School of Food Science and Technology, Jiangnan University, Wuxi 214122, China; International Joint Laboratory on Food Safety, Jiangnan University, Wuxi 214122, China
| | - Wei Liu
- School of Food Science and Technology, Jiangnan University, Wuxi 214122, China; Key Lab of Space Nutrition and Food Engineering, China Astronaut Research and Training Center, Beijing 100094, China
| | - Ling Chen
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi 214122, China; Science Center for Future Foods, Jiangnan University, Wuxi 214122, China; International Joint Laboratory on Food Safety, Jiangnan University, Wuxi 214122, China
| | - Maoshen Chen
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi 214122, China; Science Center for Future Foods, Jiangnan University, Wuxi 214122, China; International Joint Laboratory on Food Safety, Jiangnan University, Wuxi 214122, China
| | - Fang Zhong
- State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi 214122, China; Science Center for Future Foods, Jiangnan University, Wuxi 214122, China; International Joint Laboratory on Food Safety, Jiangnan University, Wuxi 214122, China.
| |
Collapse
|
16
|
Effect of Molar Substitution on the Properties of γ-Hydroxypropyl Starch. MOLECULES (BASEL, SWITZERLAND) 2022; 27:molecules27072119. [PMID: 35408517 PMCID: PMC9000244 DOI: 10.3390/molecules27072119] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/18/2022] [Revised: 03/16/2022] [Accepted: 03/24/2022] [Indexed: 11/24/2022]
Abstract
A new type of hydroxyalkyl starch, γ-hydroxypropyl starch (γ-HPS), was prepared by etherification of alkali-activated starch with 3-chloropropanol. The reaction efficiency, morphological change, thermodynamic and apparent viscosity properties, and other physicochemical characteristics were described. The molar substitution (MS) of modified whole starch was determined to be 0.008, 0.017, 0.053, 0.106, and 0.178, with a ratio of 5%, 15%, 25%, 35%, and 45% 3-chloropropanol to starch (v/w), respectively. Compared to native starch, the granular size and shape and the X-ray diffraction pattern of γ-HPS are not very different. For low-substituted γ-HPS, the implications may be less evident. Thermal stability measurements by means of thermogravimetric analyses and differential scanning calorimetry (TGA-DSC) proved that thermal stability was reduced and water retaining capacity was increased after hydroxypropylation. Furthermore, the findings also showed that the solubility, light transmittance, and retrogradation of γ-HPS pastes could be improved by etherification. The greater the MS of the γ-HPS, the more its freeze–thaw stability and acid resistivity increased. In this study, we provide relevant information for the application of γ-HPS in food and non-food industries.
Collapse
|
17
|
Liu XL, Zhu CF, Liu HC, Zhu JM. Quantitative analysis of degree of substitution/molar substitution of etherified polysaccharide derivatives. Des Monomers Polym 2022; 25:75-88. [PMID: 35341117 PMCID: PMC8956314 DOI: 10.1080/15685551.2022.2054118] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2021] [Accepted: 03/11/2022] [Indexed: 12/16/2022] Open
Abstract
Due to the unique properties such as nontoxicity, biodegradability, availability from renewable resources, and cost-effectiveness, polysaccharides play a very important part in the science and technology field. The various chemically modified derivatives of these offer a wide range of high value-added in both food and non-food industries. Among the chemical modification, etherified polysaccharide is one of the most widespread derivatives by introducing an ether group which is commonly stable in both acidic and alkaline conditions. Hydroxyalkylation, alkylation, carboxymethylation, cationization, and cyanoethylation are some of the modifications commonly employed to prepare polysaccharides ethers derivatives. There also has been a growing tendency for creating new types of modification by combining the different means of chemical techniques. The correct determination of degree of substitution (DS)/molar substitution (MS) is crucially important. The objective of this article is to summarize developments in synthetic etherified polysaccharides, involving analytical methods for determination of MS/DS, measurement processes, and the associated mechanisms.
Collapse
Affiliation(s)
- Xue-Li Liu
- College of Material and Chemical Engineering, Chuzhou University, Anhui, China
- School of Chemistry & Chemical Engineering, Anhui University, Anhui, China
| | - Chun-Feng Zhu
- Department of Pharmacy, Traditional Chinese Hospital of Lu’an, Anhui, China
| | - Han-Chun Liu
- College of Material and Chemical Engineering, Chuzhou University, Anhui, China
| | - Jia-Ming Zhu
- College of Material and Chemical Engineering, Chuzhou University, Anhui, China
| |
Collapse
|
18
|
Storage Stability of Chilled and Frozen Starch Gels as Affected by Blended Starch Formulation, Sucrose Syrup, and Coconut Milk. INTERNATIONAL JOURNAL OF FOOD SCIENCE 2022; 2022:9454229. [PMID: 35282308 PMCID: PMC8904907 DOI: 10.1155/2022/9454229] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/29/2021] [Accepted: 02/21/2022] [Indexed: 11/18/2022]
Abstract
Effects of starch formulation, highly concentrated sucrose solution, and coconut milk on the stability of starch gels kept under chilled and frozen conditions were determined. Gels containing rice starch (RS), tapioca starch (TS) (RS:TS of 1 : 0.85), and hydroxypropyl distarch phosphate (HDP, 0-50% of total starch) were prepared from 15% starch suspension using water, 45°Brix sucrose syrup or coconut milk as liquid media. After aging at 4°C for 21 days, starch gels had higher hardness and chewiness, with lower cohesiveness and springiness (p ≤ 0.05). Water-based gels containing HDP had less extent of texture hardening, lower degree of crystallinity, and more homogeneous microstructure during 4°C aging. However, for the starch gels in sucrose syrup or coconut milk, HDP induced greater gel hardening, higher degree of crystallinity, and denser gel microstructure during chilled storage. This could be due to the crystallization of sucrose or lipid/amylose-lipid complexes. Nevertheless, HDP enhanced freeze-thaw stability of the gels, regardless of the liquid media used (p ≤ 0.05). According to the consumer test of the model desserts subjected to a single freeze-thaw cycle, the sample containing 50% HDP gel in sucrose syrup or 25% HDP gel in coconut milk gained the highest hedonic score of texture and overall acceptance (p ≤ 0.05).
Collapse
|
19
|
Charoenthai N, Sanga‐ngam T, Kasemwong K, Sungthongjeen S, Puttipipatkhachorn S. Characterization of Hydroxypropyl Tapioca Starch and Its Pregelatinized Starch as Tablet Disintegrants. STARCH-STARKE 2022. [DOI: 10.1002/star.202100263] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Nattawut Charoenthai
- Department of Manufacturing Pharmacy Faculty of Pharmacy Mahidol University Bangkok 10400 Thailand
- Center of Innovative Pharmacy for Pharmaceutical and Herbal Product Development Faculty of Pharmacy Mahidol University Bangkok 10400 Thailand
| | - Theerapong Sanga‐ngam
- Department of Manufacturing Pharmacy Faculty of Pharmacy Mahidol University Bangkok 10400 Thailand
| | - Kittiwut Kasemwong
- National Nanotechnology Center National Science and Technology Development Agency Pathumthani 12120 Thailand
| | - Srisagul Sungthongjeen
- Department of Pharmaceutical Technology Faculty of Pharmaceutical Sciences Naresuan University Phitsanulok 65000 Thailand
| | - Satit Puttipipatkhachorn
- Department of Manufacturing Pharmacy Faculty of Pharmacy Mahidol University Bangkok 10400 Thailand
- Center of Innovative Pharmacy for Pharmaceutical and Herbal Product Development Faculty of Pharmacy Mahidol University Bangkok 10400 Thailand
| |
Collapse
|
20
|
Utilization of bio-polymeric additives for a sustainable production strategy in pulp and paper manufacturing: A comprehensive review. CARBOHYDRATE POLYMER TECHNOLOGIES AND APPLICATIONS 2021. [DOI: 10.1016/j.carpta.2021.100050] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023] Open
|
21
|
Koduru HK, Marinov YG, Scaramuzza N. Review on Microstructural and Ion‐conductivity Properties of Biodegradable Starch‐Based Solid Polymer Electrolyte Membranes. STARCH-STARKE 2021. [DOI: 10.1002/star.202100170] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Hari Krishna Koduru
- Bulgarian Academy of Sciences Georgi Nadjakov Institute of Solid State Physics 72, Tzarigradsko Chaussee Blvd. Sofia 1784 Bulgaria
- Dipartimento di Fisica Università degli Studi della Calabria Via P. Bucci, Cubo 33B – 87036, Rende (CS), ‐ Italy Arcavacata di Rende Calabria Italy
| | - Yordan Georgiev Marinov
- Bulgarian Academy of Sciences Georgi Nadjakov Institute of Solid State Physics 72, Tzarigradsko Chaussee Blvd. Sofia 1784 Bulgaria
| | - Nicola Scaramuzza
- Dipartimento di Fisica Università degli Studi della Calabria Via P. Bucci, Cubo 33B – 87036, Rende (CS), ‐ Italy Arcavacata di Rende Calabria Italy
| |
Collapse
|
22
|
He J, Dai L, Deng Q, Li L. Uncovering the Polydisperse Characteristics of Modification Inhomogeneity for Starch during Oxidation by Sodium Periodate. Macromolecules 2021. [DOI: 10.1021/acs.macromol.1c01679] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Jing He
- Department of Chemical Physics, University of Science and Technology of China, Hefei 230026, China
- The Food Science and Processing Research Center, College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, China
| | - Laixin Dai
- The Food Science and Processing Research Center, College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, China
| | - Qiuhong Deng
- The Food Science and Processing Research Center, College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, China
| | - Lianwei Li
- The Food Science and Processing Research Center, College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, China
| |
Collapse
|
23
|
Javadian N, Mohammadi Nafchi A, Bolandi M. The effects of dual modification on functional, microstructural, and thermal properties of tapioca starch. Food Sci Nutr 2021; 9:5467-5476. [PMID: 34646517 PMCID: PMC8498069 DOI: 10.1002/fsn3.2506] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2021] [Revised: 07/23/2021] [Accepted: 07/25/2021] [Indexed: 11/12/2022] Open
Abstract
The aim of this study was to investigate the effects of dual modification on the functional, microstructural, and thermal properties of tapioca starch. Tapioca starch was first hydrolyzed by 0.14 M HCl for 0, 6, 12, 18, and 24 hr and then hydroxypropylated by adding 0%, 10%, 20%, and 30% (v/w) propylene oxide. The degree of hydroxypropylation, solubility, water absorption, rheological, thermal, and microstructure characterization of dually modified tapioca starch was determined. Hydroxypropylation did not cause any considerable changes in the starch granular size and shape of tapioca starch. Acid hydrolysis disrupts the starch granules, and the starches with smaller sizes were produced. The degree of molar substitution (DS) of dual modified starches ranged from 0.118 to 0.270. The dual modified starches significantly had higher solubility than native starch (p < .05). Hydrolysis of starches with acid decreases swelling power while hydroxypropylation increases the swelling power. The results also showed lower gelatinization (To, Tp, Tc, and ΔH) and pasting parameters (the peak and final viscosity, peak time, and pasting temperature) for the dual modified starches than other treatments. In summary, this study showed that dually modified tapioca starch has potential application in dip molding and coating.
Collapse
Affiliation(s)
- Neda Javadian
- Department of Food Science and TechnologyIslamic Azad UniversityDamghanIran
| | - Abdorreza Mohammadi Nafchi
- Department of Food Science and TechnologyIslamic Azad UniversityDamghanIran
- Food Technology DivisionSchool of Industrial TechnologyUniversiti Sains MalaysiaPenangMalaysia
| | - Marzieh Bolandi
- Department of Food Science and TechnologyIslamic Azad UniversityDamghanIran
| |
Collapse
|
24
|
Man XL, Peng WK, Chen J, Liu XL. Analysis of Molar Substitution of Hydroxybutyl Group by Zeisel Reaction in Starch Ethers. Molecules 2021; 26:molecules26185509. [PMID: 34576984 PMCID: PMC8465643 DOI: 10.3390/molecules26185509] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2021] [Revised: 09/07/2021] [Accepted: 09/09/2021] [Indexed: 11/29/2022] Open
Abstract
A new etherified starch, δ-hydroxybutyl starch (δ-HBS), was prepared by utilising 4-chlorobutan-1-ol as the etherifying reagent. The method of Zeisel gas chromatography for the determination of the molar substitution was described. This technique offers a simple and rapid method for quantitative analysis with reproducible results. Meanwhile, the mechanism of the Zeisel reaction was also investigated.
Collapse
Affiliation(s)
- Xiao-Lei Man
- Geosynthetics Applied Research Centre, College of Civil and Architecture Engineering, Chuzhou University, Chuzhou 239012, China;
| | - Wei-Kang Peng
- College of Material and Chemical Engineering, Chuzhou University, Chuzhou 239012, China;
| | - Jun Chen
- College of Biotechnology and Pharmaceutical Engineering, West Anhui University, Lu’an 237012, China;
| | - Xue-Li Liu
- College of Material and Chemical Engineering, Chuzhou University, Chuzhou 239012, China;
- School of Chemistry & Chemical Engineering, Anhui University, Hefei 230601, China
- Correspondence:
| |
Collapse
|
25
|
Lim LM, Hadinoto K. High-Payload Buccal Delivery System of Amorphous Curcumin-Chitosan Nanoparticle Complex in Hydroxypropyl Methylcellulose and Starch Films. Int J Mol Sci 2021; 22:ijms22179399. [PMID: 34502305 PMCID: PMC8430606 DOI: 10.3390/ijms22179399] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/30/2021] [Revised: 08/27/2021] [Accepted: 08/27/2021] [Indexed: 12/17/2022] Open
Abstract
Oral delivery of curcumin (CUR) has limited effectiveness due to CUR’s poor systemic bioavailability caused by its first-pass metabolism and low solubility. Buccal delivery of CUR nanoparticles can address the poor bioavailability issue by virtue of avoidance of first-pass metabolism and solubility enhancement afforded by CUR nanoparticles. Buccal film delivery of drug nanoparticles, nevertheless, has been limited to low drug payload. Herein, we evaluated the feasibilities of three mucoadhesive polysaccharides, i.e., hydroxypropyl methylcellulose (HPMC), starch, and hydroxypropyl starch as buccal films of amorphous CUR–chitosan nanoplex at high CUR payload. Both HPMC and starch films could accommodate high CUR payload without adverse effects on the films’ characteristics. Starch films exhibited far superior CUR release profiles at high CUR payload as the faster disintegration time of starch films lowered the precipitation propensity of the highly supersaturated CUR concentration generated by the nanoplex. Compared to unmodified starch, hydroxypropyl starch films exhibited superior CUR release, with sustained release of nearly 100% of the CUR payload in 4 h. Hydroxypropyl starch films also exhibited good payload uniformity, minimal weight/thickness variations, high folding endurance, and good long-term storage stability. The present results established hydroxypropyl starch as the suitable mucoadhesive polysaccharide for high-payload buccal film applications.
Collapse
|
26
|
Yun L, Liu C, Li K, Deng L, Li J. Structure and properties of corn starch synthesized by using sulfobetaine and deoxycholic acid. Int J Biol Macromol 2021; 183:1293-1301. [PMID: 34004197 DOI: 10.1016/j.ijbiomac.2021.05.078] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/15/2021] [Revised: 05/05/2021] [Accepted: 05/11/2021] [Indexed: 02/01/2023]
Abstract
Novel starch polymers (sulfobetaine-starch-deoxycholic acid) were first synthesized by grafting zwitterionic sulfobetaine and deoxycholic acid onto corn starch molecules. In order to explore the mechanism of modified starch, the chemical structure, morphological properties, thermal stability, and self-assembly performance of modified corn starch were determined. Preliminary structural characterization, using NMR, demonstrated that the glucose carbon C6 was the main etherification grafting site and C2 and C3 were the esterification grafting sites. This was confirmed using FT-IR to detect the presence of a new carbonyl signal around 1739 cm-1. XRD, SEM, and PLM micrographs showed structural losses in the starch granule. Thermogravimetric analysis showed an increase in thermal stability with etherification and esterification in nature. Self-assembly performance analysis demonstrated that the polymer formed more thermodynamically stable micelles under highly diluted conditions. This work will help expand the space for starch application.
Collapse
Affiliation(s)
- Linqi Yun
- College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Cancan Liu
- College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Kai Li
- College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, PR China; The Collaborative Innovation Center for Guangxi Sugar Industry, Nanning 530004, Guangxi, PR China
| | - Ligao Deng
- College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, PR China.
| | - Jianbin Li
- College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, PR China.
| |
Collapse
|
27
|
Abstract
Resistant starch, microbiome, and precision modulation. Mounting evidence has positioned the gut microbiome as a nexus of health. Modulating its phylogenetic composition and function has become an attractive therapeutic prospect. Resistant starches (granular amylase-resistant α-glycans) are available as physicochemically and morphologically distinguishable products. Attempts to leverage resistant starch as microbiome-modifying interventions in clinical studies have yielded remarkable inter-individual variation. Consequently, their utility as a potential therapy likely depends predominantly on the selected resistant starch and the subject's baseline microbiome. The purpose of this review is to detail i) the heterogeneity of resistant starches, ii) how resistant starch is sequentially degraded and fermented by specialized gut microbes, and iii) how resistant starch interventions yield variable effects on the gut microbiome.
Collapse
Affiliation(s)
- Peter A. Dobranowski
- Department of Biochemistry, Microbiology and Immunology, University of Ottawa, Ottawa, Ontario, Canada
- Ottawa Institute of Systems Biology, University of Ottawa, Ottawa, Ontario, Canada
| | - Alain Stintzi
- Department of Biochemistry, Microbiology and Immunology, University of Ottawa, Ottawa, Ontario, Canada
- Ottawa Institute of Systems Biology, University of Ottawa, Ottawa, Ontario, Canada
| |
Collapse
|
28
|
Liu X, Zhang K, Hu Y, Zhang Z, Chen J, Ma T, Wang J. Determination of Molar Substitution of γ‐Hydroxypropyl Starch. STARCH-STARKE 2020. [DOI: 10.1002/star.202000013] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Xue‐Li Liu
- College of Material and Chemical Engineering Chuzhou University Anhui 239012 China
- School of Chemistry and Chemical Engineering AnHui University He Fei 230601 China
| | - Kun Zhang
- College of Material and Chemical Engineering Chuzhou University Anhui 239012 China
| | - Yu Hu
- College of Material and Chemical Engineering Chuzhou University Anhui 239012 China
| | - Zhengjuan Zhang
- College of Material and Chemical Engineering Chuzhou University Anhui 239012 China
| | - Jun Chen
- Shanghai Hadal Biomedical Engineering Co., Ltd Building 7, No. 218 Haiji 6 Rd Shanghai 201200 China
| | - TianLin Ma
- College of Material and Chemical Engineering Chuzhou University Anhui 239012 China
| | - JiaJia Wang
- College of Material and Chemical Engineering Chuzhou University Anhui 239012 China
| |
Collapse
|
29
|
Ulbrich M, Flöter E. Modification of Starches with Different Amylose/Amylopectin Ratios Using the Dual Approach with Hydroxypropylation and Subsequent Acid‐Thinning: II. Impacts on Gelatinization and Solution Properties. STARCH-STARKE 2020. [DOI: 10.1002/star.202000145] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Marco Ulbrich
- Department of Food Technology and Food Chemistry Technische Universität Berlin Chair of Food Process Engineering Office GG2, Seestraße 13, D‐13353 Berlin Germany
| | - Eckhard Flöter
- Department of Food Technology and Food Chemistry Technische Universität Berlin Chair of Food Process Engineering Office GG2, Seestraße 13, D‐13353 Berlin Germany
| |
Collapse
|
30
|
Ulbrich M, Flöter E. Modification of Starches with Different Amylose/Amylopectin Ratios Using the Dual Approach with Hydroxypropylation and Subsequent Acid Thinning—III: Impacts on Gel Characteristics. STARCH-STARKE 2020. [DOI: 10.1002/star.202000146] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Marco Ulbrich
- Chair of Food Process Engineering Department of Food Technology and Food Chemistry, Technische Universität Berlin Office GG2, Seestraße 13 Berlin D‐13353 Germany
| | - Eckhard Flöter
- Chair of Food Process Engineering Department of Food Technology and Food Chemistry, Technische Universität Berlin Office GG2, Seestraße 13 Berlin D‐13353 Germany
| |
Collapse
|
31
|
Lauer MK, Smith RC. Recent advances in starch‐based films toward food packaging applications: Physicochemical, mechanical, and functional properties. Compr Rev Food Sci Food Saf 2020; 19:3031-3083. [DOI: 10.1111/1541-4337.12627] [Citation(s) in RCA: 44] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2020] [Revised: 07/30/2020] [Accepted: 08/02/2020] [Indexed: 01/08/2023]
Affiliation(s)
- Moira K. Lauer
- Department of Chemistry Clemson University Clemson South Carolina USA
| | - Rhett C. Smith
- Department of Chemistry Clemson University Clemson South Carolina USA
| |
Collapse
|
32
|
Akinterinwa A, Oladele E, Adebayo A, Gurgur E, Iyanu OO, Ajayi O. Cross-linked-substituted (esterified/etherified) starch derivatives as aqueous heavy metal ion adsorbent: a review. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2020; 82:1-26. [PMID: 32910789 DOI: 10.2166/wst.2020.332] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Starch is a biopolymer with outstanding economic and environmentally friendly attributes which has driven technological innovations to enhance its applications in food and non-food industries. Starch is constituted by O-H groups with valency and electronic characteristics that can initiate adsorption of aqueous heavy metal ions (AHMIs). However, this can be enhanced using various modification sequences. A common procedure is the cross-linking and substitution of the O-H groups via esterification and/or etherification reactions to produce starch derivative adsorbents (SDAs) with improved structural and functional properties for adsorption of AHMIs. The efficiency of SDAs developed using these procedures depends on the botanical source of the native starch base, porosity and structural stability of the derivative (i.e. degree of cross-linking), substituted functional group(s), degree of substitution and the steric/conformation effects of the substituted groups. Many works have been done to optimize these factors, and this review highlighted some of the tailored procedures and the results obtained.
Collapse
Affiliation(s)
| | - Ebun Oladele
- Federal University of Technology, Akure, Nigeria
| | | | | | | | | |
Collapse
|
33
|
Ulbrich M, Flöter E. Modification of Starches with Different Amylose/Amylopectin‐Ratios Using the Dual Approach with Hydroxypropylation and Subsequent Acid‐Thinning—Impacts on Morphological and Molecular Characteristics. STARCH-STARKE 2020. [DOI: 10.1002/star.202000015] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Marco Ulbrich
- Technische Universität Berlin Department of Food Technology and Food Chemistry Chair of Food Process Engineering Office GG2, Seestraße 13 Berlin D‐13353 Germany
| | - Eckhard Flöter
- Technische Universität Berlin Department of Food Technology and Food Chemistry Chair of Food Process Engineering Office GG2, Seestraße 13 Berlin D‐13353 Germany
| |
Collapse
|
34
|
Hadnađev M, Dapčević‐Hadnađev T, Pajić‐Lijaković I, Mastilović J, Bugarski B. Molecular and Supra‐Molecular Structural Ordering of Wheat Starch‐OSA Modified Waxy Maize Starch Mixtures During Storage. STARCH-STARKE 2019. [DOI: 10.1002/star.201800225] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Miroslav Hadnađev
- Institute of Food TechnologyUniversity of Novi SadBul. cara Lazara 121000Novi SadSerbia
| | | | - Ivana Pajić‐Lijaković
- Faculty of Technology and MetallurgyUniversity of BelgradeKarnegijeva 411120BelgradeSerbia
| | - Jasna Mastilović
- Institute of Food TechnologyUniversity of Novi SadBul. cara Lazara 121000Novi SadSerbia
| | - Branko Bugarski
- Faculty of Technology and MetallurgyUniversity of BelgradeKarnegijeva 411120BelgradeSerbia
| |
Collapse
|
35
|
Effect of single and dual steps annealing in combination with hydroxypropylation on physicochemical, functional and rheological properties of barley starch. Int J Biol Macromol 2019; 129:1006-1014. [DOI: 10.1016/j.ijbiomac.2019.02.104] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/10/2018] [Revised: 01/30/2019] [Accepted: 02/16/2019] [Indexed: 02/02/2023]
|