Design, characterizations, and antimicrobial activity of sustainable home furnishing-based waste fabric treated using biobased nanocomposite

Clothing and textile industries are major contributors to environmental pollution including textile manufacturing through garment production, spinning, weaving, and dyeing. In this context, the sustainability textile industry is a big challenge and contributes to serving a large segment of society. Also, textile wastes could be used as a raw material for added-value products. Herein, in this study, recycling of residues fabric was treated with antimicrobial nanocomposite to reach the best use of exhausts and obtain multifunction products of aesthetic via the technical design of the waste raw materials. Besides, solving the unemployment problem by opening fields for small industry projects capable of producing high-value textile artifacts, especially when treated against microbes, can be applied to home furnishings. The waste fabric was treated via green synthesis nanocomposite based on chitosan and in situ prepared ZnONPs and cross-linked with tannic acid. The prepared nanocomposite was characterized using physicochemical analysis including attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD). Additionally, the nanocomposite and treated fabric topographical behavior were studied using scanning electron microscopy (SEM) attachment with energy dispersive X-ray analysis (EDX), and images were processed to evaluate the roughness structure. Additionally, high-resolution transmission electron microscopy (HR-TEM) and dynamic light scattering (DLS) were performed to ensure the size and stability of the nanocomposite. The obtained results affirmed the green synthesis of nanocomposite with a size around 130 nm, as well as the doped ZnONPs average size of 26 nm and treated waste fabric, performed a promising attraction between nanocomposite and fabric fibers. Moreover, the antimicrobial study observed excellent activity of nanocomposite against bacteria and unicellular fungi as well.

Green biosynthesis of bimetallic ZnO@AuNPs with its formulation into cellulose derivative: biological and environmental applications

Nanoparticles (NPs) formulation in biopolymers is an attractive process for the researcher to decrease the disadvantages of NPs application alone. Bimetallic NPs are a promising formula of two NPs that usually act as synergetic phenomena. Zinc oxide and gold NPs (ZnO@AuNPs) biosynthesis as a bimetallic was prepared via the eco-friendly manner currently. Carboxymethylcellulose (CMC) was employed for the formulation of ZnO@AuNPs as a nanocomposite via a green method. Physicochemical and topographical characterization was assigned to ZnO@AuNPs and nanocomposite features. The nanostructure of bimetallic NPs and nanocomposite were affirmed with sizes around 15 and 25 nm, respectively. Indeed, the DLS measurements affirmed the more reasonable size and stability of the prepared samples as 27 and 93 nm for bimetallic NPs and nanocomposite, respectively. The inhibitory potential of nanocomposite was more than ZnO@AuNPs against Staphylococcus aureus, Escherichia coli, Salmonella typhi, Enterococcus faecalis, Mucor albicans, Aspergillus flavus, and Mucor circinelloid. ZnO@AuNPs and nanocomposite exhibited antioxidant activity via DPPH with IC50 of 71.38 and 32.4 µg/mL, correspondingly. Excellent anti-diabetic potential of nanocomposite with IC50 of 7.4 µg/mL, and ZnO@AuNPs with IC50 of 9.7 µg/mL was reported compared with the standard acarbose with the IC50 of 50.93 µg/mL for amylase inhibition (%). Photocatalytic degradation of RR195 and RB dyes was performed by ZnO@AuNPs and nanocomposite, where maximum degradation was 85.7 ± 1.53 and 88.7 ± 0.58%, respectively using ZnO@AuNPs, 90.3 ± 0.28 and 91.8 ± 0.27%, respectively using nanocomposite at 100 min.

Synergistic antimicrobial action of nanocellulose, nanoselenium, and nanocomposite against pathogenic microorganisms

Recently, there has been a surge in curiosity regarding the application of biopolymer-derived nanomaterials, primarily attributable to their extensive array of potential applications. In this study, nanocellulose was extracted from algae, biomolecule substances synthesized selenium nanoparticles, and a simple nanocomposite of nanocellulose and nanoselenium was elaborated using nanocellulose as a reducing agent under hydrothermal conditions. These nanocomposite materials have markedly improved properties at low concentrations. Our obtained polymers were characterized using techniques including Fourier-transform infrared spectroscopy, X-ray powder diffraction, Thermo gravimetric analysis (TGA), Scanning electron microscopic (SEM), Energy Dispersive X-ray analysis (EDX), Transmission electron microscopic (TEM), Zeta Potential and Dynamic Light Scattering (DLS). The size of nanocellulose, nanoselenium, and nanocomposite ranged from 35 to 85 nm. Antimicrobial investigation of the prepared nanopolymers was tested against Gram-negative bacteria such as Bacillus subtilis ATCC 6633 and Staphylococcus aureus ATCC 6538, Gram-positive bacteria such as Escherichia coli ATCC8739 and Pseudomonas aeruginosa ATCC 90274 and fungi such as Candida albicans ATCC 10221 besides Aspergillus fumigatus. In antibacterial action tests, nanoselenium showed significant efficacy against Bacillus subtilis with a 12 mm zone of inhibition, while the nanocomposite eclipsed all microorganisms. Nanocellulose and the nanocomposite were potent against Staphylococcus aureus (14 mm and 16 mm zones of inhibition, respectively). The nanocomposite showed potential against Escherichia coli and Pseudomonas aeruginosa (17 mm and 15 mm zones of inhibition, respectively). All polymers effectively inhibited Candida albicans growth (18 mm for the nanocomposite). The minimum inhibitory concentrations (MIC) for three polymers have also been established. While nanocellulose displayed a MIC of 62.5 μg/ml in contradiction to Staphylococcus aureus, nanoselenium demonstrated a significant MIC of 3.95 μg/ml against Bacillus subtilis. These findings highlight the potential of the nanocomposite (nanocellulose-nanoselenium) as a broad-spectrum antimicrobial polymer.

New Excipient For Oral Drug Delivery: CNC Derived From Sugarcane Bagasse-Derived Microcrystalline Cellulose

Nanocrystalline cellulose (CNC) has emerged as a subject of researcher's interest because of its diverse attributes encompassing biocompatibility, sustainability, a high aspect ratio, and an abundance of -OH groups suitable for modifications. Sugarcane bagasse microcrystalline cellulose (SCBMCC) was used as the raw material for the preparation of CNC due to its pure cellulose content, which is mildly compromised by the pectin, hemicellulose, lignin, and other lignocellulosic components. In the present work, CNC was extracted from SCBMCC and used as a disintegrant. The classic hydrolysis technique was used for the preparation of CNC. Hydrolytic conditions were optimized using the response surface methodology (RSM). The optimized batch of CNC was characterized using techniques such as field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. Notably, CNC prepared under a hydrolysis time of 90 min exhibited the highest crystallinity of 69.9%. The average particle size and zeta potential were found to be 145 nm and -34.4 mV, respectively. Thermal analysis suggested that an intermediate hydrolysis time resulted in CNC with enhanced thermal stability, showcasing its potential for pharmaceutical applications. Diclofenac potassium was used as the model drug to evaluate the disintegrant properties of CNC as an excipient. Tablets were prepared using the direct compression method. SCBMCC and CNC were used as disintegrants and were compared with the commercial product. The disintegration times (DTs) attained for the tablets prepared using CNC and SCBMCC are 219 and 339.83 s, respectively. The dissolution study of CNC showed a dissolution efficacy (DE%) of 66 and a mean dissolution time (MDT) of 12. The research findings showed that tablets prepared using CNC as disintegrants exhibited the fastest disintegration compared to other formulations.

Gelatin Methacryloyl (GelMA)-Based Biomaterial Inks: Process Science for 3D/4D Printing and Current Status

Tissue engineering for injured tissue replacement and regeneration has been a subject of investigation over the last 30 years, and there has been considerable interest in using additive manufacturing to achieve these goals. Despite such efforts, many key questions remain unanswered, particularly in the area of biomaterial selection for these applications as well as quantitative understanding of the process science. The strategic utilization of biological macromolecules provides a versatile approach to meet diverse requirements in 3D printing, such as printability, buildability, and biocompatibility. These molecules play a pivotal role in both physical and chemical cross-linking processes throughout the biofabrication, contributing significantly to the overall success of the 3D printing process. Among the several bioprintable materials, gelatin methacryloyl (GelMA) has been widely utilized for diverse tissue engineering applications, with some degree of success. In this context, this review will discuss the key bioengineering approaches to identify the gelation and cross-linking strategies that are appropriate to control the rheology, printability, and buildability of biomaterial inks. This review will focus on the GelMA as the structural (scaffold) biomaterial for different tissues and as a potential carrier vehicle for the transport of living cells as well as their maintenance and viability in the physiological system. Recognizing the importance of printability toward shape fidelity and biophysical properties, a major focus in this review has been to discuss the qualitative and quantitative impact of the key factors, including microrheological, viscoelastic, gelation, shear thinning properties of biomaterial inks, and printing parameters, in particular, reference to 3D extrusion printing of GelMA-based biomaterial inks. Specifically, we emphasize the different possibilities to regulate mechanical, swelling, biodegradation, and cellular functionalities of GelMA-based bio(material) inks, by hybridization techniques, including different synthetic and natural biopolymers, inorganic nanofillers, and microcarriers. At the close, the potential possibility of the integration of experimental data sets and artificial intelligence/machine learning approaches is emphasized to predict the printability, shape fidelity, or biophysical properties of GelMA bio(material) inks for clinically relevant tissues.

Aesthetic Cellulose Filaments with Water-Triggered Switchable Internal Stress and Customizable Polarized Iridescence Toward Green Fashion Innovation

Healthy, convenient, and aesthetic hair dyeing and styling are essential to fashion trends and personal-social interactions. Herein, we fabricate green, scalable, and aesthetic regenerated cellulose filaments (ACFs) with customizable iridescent colors, outstanding mechanical properties, and water-triggered moldability for convenient and fashionable artificial hairdressing. The fabrication of ACFs involves cellulose dissolution, cross-linking, wet-spinning, and nanostructured orientation. Notably, the cross-linking strategy endows the ACFs with significantly weakened internal stress, confirmed by monitoring the offset of the C-O-C group in the cellulose molecular chain with Raman imaging, which ensures a tailorable orientation of the nanostructure during wet stretching and tunable iridescent polarization colors. Interestingly, ACFs can be tailored for three-dimensional shaping through a facile water-triggered adjustable internal stress: temporary shaping with low-level internal stress in the wet state and permanent shaping with high-level internal stress in the dry state. The health, convenience, and green aesthetic filaments show great potential in personal wearables.

Polysaccharide-based hydrogels for medical devices, implants and tissue engineering: A review

Hydrogels are highly biocompatible biomaterials composed of crosslinked three-dimensional networks of hydrophilic polymers. Owing to their natural origin, polysaccharide-based hydrogels (PBHs) possess low toxicity, high biocompatibility and demonstrate in vivo biodegradability, making them great candidates for use in various biomedical devices, implants, and tissue engineering. In addition, many polysaccharides also show additional biological activities such as antimicrobial, anticoagulant, antioxidant, immunomodulatory, hemostatic, and anti-inflammatory, which can provide additional therapeutic benefits. The porous nature of PBHs allows for the immobilization of antibodies, aptamers, enzymes and other molecules on their surface, or within their matrix, potentiating their use in biosensor devices. Specific polysaccharides can be used to produce transparent hydrogels, which have been used widely to fabricate ocular implants. The ability of PBHs to encapsulate drugs and other actives has been utilized for making neural implants and coatings for cardiovascular devices (stents, pacemakers and venous catheters) and urinary catheters. Their high water-absorption capacity has been exploited to make superabsorbent diapers and sanitary napkins. The barrier property and mechanical strength of PBHs has been used to develop gels and films as anti-adhesive formulations for the prevention of post-operative adhesion. Finally, by virtue of their ability to mimic various body tissues, they have been explored as scaffolds and bio-inks for tissue engineering of a wide variety of organs. These applications have been described in detail, in this review.

Polysaccharide nanocomposites in wastewater treatment: A review

In modern times, wastewater treatment is vital due to increased water contamination arising from pollutants such as nutrients, pathogens, heavy metals, and pharmaceutical residues. Polysaccharides (PSAs) are natural, renewable, and non-toxic biopolymers used in wastewater treatment in the field of gas separation, liquid filtration, adsorption processes, pervaporation, and proton exchange membranes. Since addition of nanoparticles to PSAs improves their sustainability and strength, nanocomposite PSAs has gained significant attention for wastewater treatment in the past decade. This review presents a comprehensive analysis of PSA-based nanocomposites used for efficient wastewater treatment, focusing on adsorption, photocatalysis, and membrane-based methods. It also discusses potential future applications, challenges, and opportunities in adsorption, filtration, and photocatalysis. Recently, PSAs have shown promise as adsorbents in biological-based systems, effectively removing heavy metals that could hinder microbial activity. Cellulose-mediated adsorbents have successfully removed various pollutants from wastewater, including heavy metals, dyes, oil, organic solvents, pesticides, and pharmaceutical residues. Thus, PSA nanocomposites would support biological processes in wastewater treatment plants. A major concern is the discharge of antibiotic wastes from pharmaceutical industries, posing significant environmental and health risks. PSA-mediated bio-adsorbents, like clay polymeric nanocomposite hydrogel beads, efficiently remove antibiotics from wastewater, ensuring water quality and ecosystem balance. The successful use of PSA-mediated bio-adsorbents in wastewater treatment depends on ongoing research to optimize their application and evaluate their potential environmental impacts. Implementing these eco-friendly adsorbents on a large scale holds great promise in significantly reducing water pollution, safeguarding ecosystems, and protecting human health.

Potassium Spraying Preharvest and Nanocoating Postharvest Improve the Quality and Extend the Storage Period for Acid Lime (Citrus aurantifolia Swingle) Fruits

Citrus fruits are one of the most abundant crops globally in more than 140 countries throughout the world. Acid lime (Citrus aurantifolia swingle) is one of the citrus fruits which popularly has rich nutritional and therapeutic features. The storage period is the important factor that affects the economic and quality properties of this fruit. This study aims to demonstrate the enhancing effect of preharvest spraying with potassium, in addition to the postharvest dipping of fruits in some edible coatings, on the quality and storability of acid lime fruits. Preharvest spraying with organic and mineral forms of potassium, namely, potassium thiosulfate 1.75 g/L (S) and potassium tartrate 2 g/L (T), were carried out at three different times, in May, June, and July. On the other hand, postharvest treatments were carried out via dipping fruits in different types of biopolymers (carboxymethyl cellulose (E2) and gum arabic (E3)) and carboxymethyl cellulose/gum arabic composite (E4) as well as nanocoating formulation based on both biopolymers and doped zinc oxide nanoparticles (ZnONPs) (E1), which were prepared via acid lime peel waste extract. Herein, the physiochemical and morphological characterizations confirmed that the nanocoating was prepared at the nanoscale and doped with green synthesis ZnONPs, with recorded sizes of around 80 and 20 nm, respectively. Preharvest spraying with potassium tartrate enhanced fruit traits (Spraying with potassium tartrate at pre-harvest and nanocoating dipping at post-harvest (TE1), spraying with potassium tartrate at pre-harvest and carboxy methyl cellulose dipping at post-harvest (TE2), spraying with potassium tartrate at pre-harvest and gum arabic dipping at post-harvest (TE3) and spraying with potassium tartrate at pre-harvest and carboxymethyl cellulose/gum arabic composite dipping at post-harvest (TE4)), followed by potassium thiosulfate (spraying with potassium thiosulfate at pre-harvest and nanocoating dipping at post-harvest (SE1), spraying with potassium thiosulfate at pre-harvest and carboxy methyl cellulose dipping at post-harvest (SE2), spraying with potassium thiosulfate at pre-harvest and gum arabic dipping at post-harvest (SE3) and spraying with potassium thiosulfate at pre-harvest and carboxymethyl cellulose/gum arabic dipping at post-harvest (SE4)), compared to control. For postharvest treatments, E1 improved fruit quality, followed by E2, E4, and E3, respectively. The integration between pre- and postharvest treatments showed a clear superiority of TE2, followed by TE4, SE1, and SE2, respectively.

Chitosan-dibenzylideneacetone based Schiff base: Evaluation of antimicrobial activity and in-vitro cytotoxicity on MCF-7 and L-132

This study holds significant importance as it explores the synthesis and characterization of two chitosan dibenzylideneacetone Schiff bases. Various analytical techniques, such as UV-visible spectroscopy, FTIR, XRD, TGA, DSC, SEM, and elemental analysis, were employed to thoroughly examine these derivatives. The antimicrobial activity of the chitosan derivatives was evaluated against a range of bacterial and fungal strains, while cytotoxicity tests were conducted on MCF-7, L-132, and VERO cell lines. In the antimicrobial tests, the chitosan derivatives exhibited remarkable antibacterial properties against S. aureus, E. coli, and Pseudomonas aeruginosa, as well as potent antifungal properties against Candida albicans and Aspergillus fumigatus. The cytotoxicity assessment revealed that the dibenzylideneacetone chitosan Schiff base (CHDBA) showed significant effectiveness against the L-132 cell line, surpassing the efficacy of doxorubicin by 2.44 times. Moreover, it exhibited substantial activity against the L-132 and MCF-7 cell lines, with IC50 values of 55.29 μg/mL and 185.8 μg/mL, respectively. Notably, none of the chitosan derivatives demonstrated cytotoxicity towards the normal cell line, indicating their non-toxic nature and safe usability. Based on these findings, it is evident that CHDBA holds promise for further development as a potential treatment option for breast cancer and lung cancer.

Green, Eco-Friendly, Highly Biocompatible and Bioactive Nanocomposite-Based Biopolymers Loaded with ZnO@Fe3O4 Nanoparticles

Biocompatibility is a major concern for promising multifunctional bioactive materials. Unfortunately, bioactive materials lack biocompatibility in some respects, so active ingredient formulations are urgently needed. Bimetallic nanoparticles have demonstrated drawbacks in stabilized biocompatible formulations. This study examined the preparation of biomaterial-based multifunctional biopolymers via an eco-friendly formulation method using ultrasound. Bimetallic zinc oxide/iron oxide (magnetic form) nanoparticles (ZnO@Fe3O4NPs) were formulated using casein and starch as capping agents and stabilizers. The formulated nanocomposite was characterized using ultraviolet-visible spectroscopy (UV-vis), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HR-TEM). Herein, the formulated nanocomposite was shown to have a thermally stable nanostructure, and the bimetallic ZnO@Fe3O4 NPs were measured as 85 nm length and 13 nm width. Additionally, the biocompatibility test showed its excellent cytocompatibility with Wi 38 and Vero normal cell lines, with IC50 550 and 650 mg/mL, respectively. Moreover, the antimicrobial activity was noted against six pathogens that are represent to the most common pathogenic microbes, with the time required for killing of bacteria and unicellular fungi being 19 h and 61 h for filamentous fungi with remarket an excellent antioxidant activity.

Plant Fibers as Composite Reinforcements for Biomedical Applications

Plant fibers possess high strength, high fracture toughness and elasticity, and have proven useful because of their diversity, versatility, renewability, and sustainability. For biomedical applications, these natural fibers have been used as reinforcement for biocomposites to infer these hybrid biomaterials mechanical characteristics, such as stiffness, strength, and durability. The reinforced hybrid composites have been tested in structural and semi-structural biodevices for potential applications in orthopedics, prosthesis, tissue engineering, and wound dressings. This review introduces plant fibers, their properties and factors impacting them, in addition to their applications. Then, it discusses different methodologies used to prepare hybrid composites based on these widespread, renewable fibers and the unique properties that the obtained biomaterials possess. It also examines several examples of hybrid composites and their biomedical applications. Finally, the findings are summed up and some thoughts for future developments are provided. Overall, the focus of the present review lies in analyzing the design, requirements, and performance, and future developments of hybrid composites based on plant fibers.

Biosynthesis of cellulose from Ulva lactuca, manufacture of nanocellulose and its application as antimicrobial polymer

Green nanotechnology has recently been recognized as a more proper and safer tool for medical applications thanks to its natural reductions with low toxicity and avoidance of injurious chemicals. The macroalgal biomass was used for nanocellulose biosynthesis. Algae are abundant in the environment and have a high content of cellulose. In our study, we extracted parent cellulose from Ulva lactuca where consecutive treatments extracted cellulose to obtain an insoluble fraction rich in cellulose. The extracted cellulose has the same results obtained by matching it with reference cellulose, especially the same Fourier transform infrared (FTIR) and X-Ray diffraction (XRD) analysis peaks. Nanocellulose was synthesized from extracted cellulose with hydrolysis by sulfuric acid. Nanocellulose was examined by Scanning electron microscope (SEM) shown by a slab-like region as Fig. 4a and Energy dispersive X-ray (EDX) to examine the chemical composition. The size of nanocellulose in the range of 50 nm is calculated by XRD analysis. Antibacterial examination of nanocellulose was tested against Gram+ bacteria like Staphylococcus aureus (ATCC6538), Klebsiella pneumonia (ST627), and Gram-negative bacteria such as Escherichia coli (ATCC25922), and coagulase-negative Staphylococci (CoNS) to give 4.06, 4.66, 4.93 and 4.43 cm as respectively. Comparing the antibacterial effect of nanocellulose with some antibiotics and estimating minimal Inhibitory Concentration (MIC) of nanocellulose. We tested the influence of cellulose and nanocellulose on some fungi such as Aspergillus flavus, Candida albicans, and Candida tropicalis. These results demonstrate that nanocellulose could be developed as an excellent solution to these challenges, making nanocellulose extracted from natural algae a very important medical material that is compatible with sustainable development.

Super-Elastic Carbonized Mushroom Aerogel for Management of Uncontrolled Hemorrhage

Uncontrolled hemorrhage is still the most common cause of potentially preventable death after trauma in prehospital settings. However, there rarely are hemostatic materials that can achieve safely and efficiently rapid hemostasis simultaneously. Here, new carbonized cellulose-based aerogel hemostatic material is developed for the management of noncompressible torso hemorrhage, the most intractable issue of uncontrolled hemorrhage. The carbonized cellulose aerogel is derived from the Agaricus bisporus after a series of processing, including cutting, carbonization, purification, and freeze-drying. In vitro, the carbonized cellulose aerogels with porous structure show improved hydrophilicity, good blood absorption, and coagulation ability, rapid shape recoverable ability under wet conditions. And in vivo, the carbonized aerogels show effective hemostatic ability in both small and big animal serious hemorrhage models. The amount of blood loss and the hemostatic time of carbonized aerogels are all better than the positive control group. Moreover, the mechanism studies reveal that the good hemostatic ability of the carbonized cellulose aerogel is associated with high hemoglobin binding efficiency, red blood cell absorption, and platelets absorption and activation. Together, the carbonized aerogel developed in this study could be promising for the management of uncontrolled hemorrhage.

Carboxymethyl cellulose/sulfur-functionalized Ti-based MOF composite: synthesis, characterization, antimicrobial, antiviral and anticancer potentiality

Microbial resistance is the first morbidity and mortality cause for patients as usually a secondary infection. Additionally, the MOF is a promising material that shows a nice activity in this field. However, these materials need a good formulation to enhance biocompatibility and sustainability. Cellulose and its derivatives are well as filers for this gap. In this presented work, a novel green active system based on carboxymethyl cellulose and Ti-MOF (MIL-125-NH₂@CMC) modified with thiophene (Thio@MIL-125-NH₂@CMC) was prepared by a post-synthetic modification (PSM) route based. FTIR, SEM and PXRD were utilized to characterize nanocomposites. In addition, transmission electron microscopy (TEM) was used to corroborate the nanocomposites' particle size and diffraction pattern as well as the DLS affirmed the size as 50 and 35 nm for MIL-125-NH₂@CMC and Thio@MIL-125-NH₂@CMC, respectively. The formulation of the nanocomposites was validated by physicochemical characterization techniques, while morphological analysis confirmed the nanoform of the prepared composites. The antimicrobial, antiviral and antitumor properties of MIL-125-NH₂@CMC and Thio@MIL-125-NH₂@CMC were assessed. Antimicrobial testing revealed that Thio@MIL-125-NH₂@CMC possesses greater antimicrobial activity than MIL-125-NH₂@CMC. Additionally, Thio@MIL-125-NH₂@CMC demonstrated promising antifungal activity against C. albicans and A. niger where MICs were 31.25 and 0.97 µg/mL, respectively. Also, Thio@MIL-125-NH₂@CMC exhibited antibacterial activity against E. coli and S. aureus where MICs were 1000 and 250 µg/mL, respectively. In addition, the results demonstrated that Thio@MIL-125-NH₂@CMC displayed promising antiviral activity against both HSV1 and COX B4, with antiviral activities of 68.89% and 39.60%, respectively. Furthermore, Thio@MIL-125-NH₂@CMC exhibited potential anticancer activity against MCF7 and PC3 cancerous cell lines, where IC₅₀ was 93.16 and 88.45%, respectively. In conclusion, carboxymethyl cellulose/sulfur-functionalized Ti-based MOF composite was successfully synthesized which had antimicrobial, antiviral and anticancer activities.

Electrospun Nanomaterials Based on Cellulose and Its Derivatives for Cell Cultures: Recent Developments and Challenges

The development of electrospun nanofibers based on cellulose and its derivatives is an inalienable task of modern materials science branches related to biomedical engineering. The considerable compatibility with multiple cell lines and capability to form unaligned nanofibrous frameworks help reproduce the properties of natural extracellular matrix and ensure scaffold applications as cell carriers promoting substantial cell adhesion, growth, and proliferation. In this paper, we are focusing on the structural features of cellulose itself and electrospun cellulosic fibers, including fiber diameter, spacing, and alignment responsible for facilitated cell capture. The study emphasizes the role of the most frequently discussed cellulose derivatives (cellulose acetate, carboxymethylcellulose, hydroxypropyl cellulose, etc.) and composites in scaffolding and cell culturing. The key issues of the electrospinning technique in scaffold design and insufficient micromechanics assessment are discussed. Based on recent studies aiming at the fabrication of artificial 2D and 3D nanofiber matrices, the current research provides the applicability assessment of the scaffolds toward osteoblasts (hFOB line), fibroblastic (NIH/3T3, HDF, HFF-1, L929 lines), endothelial (HUVEC line), and several other cell types. Furthermore, a critical aspect of cell adhesion through the adsorption of proteins on the surfaces is touched upon.

A review of environmental friendly green composites: production methods, current progresses, and challenges

The growing concern about environmental damage and the inability to meet the demand for more versatile, environmentally friendly materials has sparked increasing interest in polymer composites derived from renewable and biodegradable plant-based materials, mainly from forests. These composites are mostly referred to as "green" and they can be widely employed in many industrial applications. Green composites are less harmful to the environment and could be potential substitutes for petroleum-based polymeric materials. It is helpful to limit usage of fossil oil assets by developing biopolymer matrices such as cellulose-reinforced biocomposites using renewable assets such as plant oils, carbohydrates, and proteins. This paper focuses on green composites processing utilizing a variety of naturally available resources, sustainable materials which are not detrimental to the environment, new scientific signs of progress in achieving green sustainable development, as well as nanotechnology and its environmental consequences. Additionally, the environmental impacts of different composite materials are examined in this paper, along with their production from eco-friendly materials. Moreover, the manufacturing aspects of green composites and some concerns related to their production are also discussed. The merits of green composite materials and valid reasons why they are a valuable substitute for the traditionally used composite materials are also covered.

Advances in the Physico-Chemical, Antimicrobial and Angiogenic Properties of Graphene-Oxide/Cellulose Nanocomposites for Wound Healing

Graphene oxide (GO) and its reduced form (rGO) have recently attracted a fascinating interest due to their physico-chemical properties, which have opened up new and interesting opportunities in a wide range of biomedical applications, such as wound healing. It is worth noting that GO and rGO may offer a convenient access to its ready dispersion within various polymeric matrices (such as cellulose and its derivative forms), owing to their large surface area, based on a carbon skeleton with many functional groups (i.e., hydroxyl, carboxyl, epoxy bridge, and carbonyl moieties). This results in new synergic properties due to the presence of both components (GO or rGO and polymers), acting at different length-scales. Furthermore, they have shown efficient antimicrobial and angiogenic properties, mostly related to the intracellular formation of reactive oxygen species (ROS), which are advantageous in wound care management. For this reason, GO or rGO integration in cellulose-based matrixes have allowed for designing highly advanced multifunctional hybrid nanocomposites with tailored properties. The current review aims to discuss a potential relationship between structural and physico-chemical properties (i.e., size, edge density, surface chemistry, hydrophilicity) of the nanocomposites with antimicrobials and angiogenic mechanisms that synergically influence the wound healing phenomenon, by paying particular attention to recent findings of GO or rGO/cellulose nanocomposites. Accordingly, after providing a general overview of cellulose and its derivatives, the production methods used for GO and rGO synthesis, the mechanisms that guide antimicrobial and angiogenic processes of tissue repair, as well as the most recent and remarkable outcomes on GO/cellulose scaffolds in wound healing applications, will be presented.

3D printing of polylactic acid: recent advances and opportunities

Bio-based polymers are a class of polymers made by living organisms, a few of them known and commercialized yet. Due to poor mechanical strength and economic constraints, they have not yet seen the extensive application. Instead, they have been an appropriate candidate for biological applications. Growing consumer knowledge of the environmental effect of polymers generated from petrochemical sources and a worldwide transition away from plastics with a lifespan of hundreds of years has resulted in greater interest in such hitherto unattainable sectors. Bio-based polymers come in various forms, including direct or "drop-in" replacements for their petrochemical counterparts with nearly identical properties or completely novel polymers that were previously unavailable, such as polylactide. Few of these bio-based polymers offer significantly improved technical specifications than their alternatives. Polylactic acid (PLA) has been well known in the last decade as a biodegradable thermoplastic source for use in 3DP by the "fused deposition modeling" method. The PLA market is anticipated to accomplish 5.2 billion US dollars in 2020 for its industrial usage. Conversely, 3DP is one of the emerging technologies with immense economic potential in numerous sectors where PLA is one of the critical options as the polymer source due to its environmentally friendly nature, glossiness, multicolor appearance, and ease of printing. The chemical structure, manufacturing techniques, standard features, and current market situation of PLA were examined in this study. This review looks at the process of 3DP that uses PLA filaments in extrusion-based 3DP technologies in particular. Several recent articles describing 3D-printed PLA items have been highlighted.

Cellulose-Based Composites as Scaffolds for Tissue Engineering: Recent Advances

Today, numerous studies have focused on the design of novel scaffolds for tissue engineering and regenerative medicine applications; however, several challenges still exist in terms of biocompatibility/cytocompatibility, degradability, cell attachment/proliferation, nutrient diffusion, large-scale production, and clinical translation studies. Greener and safer technologies can help to produce scaffolds with the benefits of cost-effectiveness, high biocompatibility, and biorenewability/sustainability, reducing their toxicity and possible side effects. However, some challenges persist regarding their degradability, purity, having enough porosity, and possible immunogenicity. In this context, naturally derived cellulose-based scaffolds with high biocompatibility, ease of production, availability, sustainability/renewability, and environmentally benign attributes can be applied for designing scaffolds. These cellulose-based scaffolds have shown unique mechanical properties, improved cell attachment/proliferation, multifunctionality, and enhanced biocompatibility/cytocompatibility, which make them promising candidates for tissue engineering applications. Herein, the salient developments pertaining to cellulose-based scaffolds for neural, bone, cardiovascular, and skin tissue engineering are deliberated, focusing on the challenges and opportunities.