Catalytic Conversion of Renewable Resources into Bulk and Fine Chemicals

Inhibition of the Decomposition Pathways of Ruthenium Olefin Metathesis Catalysts: Development of Highly Efficient Catalysts for Ethenolysis

Ruthenium-based Hoveyda-type olefin metathesis catalysts bearing novel rigid spirocyclic alkyl amino carbenes (CAACs) have been developed. They are characterized by exceptional stability toward decomposition through β-elimination and bimolecular pathways, thus enabling unprecedented efficiency in the cross-metathesis of seed oil-derived fatty acid esters with ethylene (ethenolysis). Catalyst loading as low as 100 ppb was applied to the ethenolysis of the model substrate methyl oleate, leading to a remarkable turnover number (TON) of 2.6 million, significantly higher than previously reported (TON 340 000 at 1 ppm and 744 000 at 0.5 ppm catalyst loading). Ethenolysis of methyl esters derived from high oleic sunflower oil and rapeseed oil, readily available on an industrial scale, inexpensive, and renewable feedstocks, was for the first time effectively carried out with 0.5 ppm catalyst loading with TON as high as 964 000.

Deriving high value products from depolymerized lignin oil, aided by (bio)catalytic funneling strategies

Lignin holds tremendous and versatile possibilities to produce value-added chemicals and high performing polymeric materials. Over the years, different cutting-edge lignin depolymerization methodologies have been developed, mainly focusing on achieving excellent yields of mono-phenolic products, some even approaching the theoretical maximum. However, due to lignin's inherent heterogeneity and recalcitrance, its depolymerization leads to relatively complex product streams, also containing dimers, and higher molecular weight fragments in substantial quantities. The subsequent chemo-catalytic valorization of these higher molecular weight streams, containing difficult-to-break, mainly C-C covalent bonds, is tremendously challenging, and has consequently received much less attention. In this minireview, we present an overview of recent advances on the development of sustainable biorefinery strategies aimed at the production of well-defined chemicals and polymeric materials, the prime focus being on depolymerized lignin oils, containing high molecular weight fractions. The key central unit operation to achieve this is (bio)catalytic funneling, which holds great potential to overcome separation and purification challenges.

Ru-Catalyzed Direct Asymmetric Reductive Amination of Bio-Based Levulinic Acid and Ester for the Synthesis of Chiral Pyrrolidinone

Direct asymmetric reductive amination of bio-based levulinic acid (LA) to the enantioenriched 5-methylpyrrolidinone is achieved by using a readily available chiral Ru/bisphosphine catalyst with excellent enantioselectivity (up to 96 % ee) and high isolated yield (up to 89 %). Methyl levulinate (ML), a byproduct from the industrial production of 2,5-furandicarboxylic acid (FDCA), can be used instead of LA with similar reactivity and selectivity. Mass spectrometry and isotope labelling studies indicate that the chiral lactam is formed via imine-enamine tautomerization/cyclization followed by asymmetric hydrogenation of the cyclic enamide.

Ozonolysis of α-angelica lactone: a renewable route to malonates

Industrially relevant intermediates such as malonic acid, malonates and 3-oxopropionates can be easily accessed by ozonolysis of α-angelica lactone, derived from the platform chemical levulinic acid. The roles of the solvent and of the quenching conditions are of key importance for the outcome of the reaction.

Hydrogenation of Cyclic 1,3-Diones to Their 1,3-Diols Using Heterogeneous Catalysts: Toward a Facile, Robust, Scalable, and Potentially Bio-Based Route

Cyclopentane-1,3-diol (4b) has gained renewed attention as a potential building block for polymers and fuels because its synthesis from hemicellulose-derived 4-hydroxycyclopent-2-enone (3) was recently disclosed. However, cyclopentane-1,3-dione (4), which is a constitutional isomer of 3, possesses a higher chemical stability and can therefore afford higher carbon mass balances and higher yields of 4b in the hydrogenation reaction under more concentrated conditions. In this work, the hydrogenation of 4 into 4b over a commercial Ru/C catalyst was systematically investigated on a bench scale through kinetic studies and variation of reaction conditions. Herein, the temperature, H2-pressure, and the solvent choice were found to have significant effects on the reaction rate and suppression of undesired dehydration of 4. The cis-trans ratio of 4b is naturally generated as 7:3 in these reactions. However, at elevated reaction temperatures, 4b epimerizes, yielding more trans products. This effect was also studied and rationalized from a thermodynamic perspective using DFT. The combined optimized reaction conditions provided 78% yield for 4b, and successful applications to 8-fold scaled up reactions (40 g) and a substrate scope of several 1,3-diones demonstrate the general applicability of this catalytic approach.

100th Anniversary of Macromolecular Science Viewpoint: Polymers from Lignocellulosic Biomass. Current Challenges and Future Opportunities

Sustainable polymers from lignocellulosic biomass have the potential to reduce the environmental impact of commercial plastics while also offering significant performance and cost benefits relative to petrochemical-derived macromolecules. However, most currently available biobased polymers are hampered by insufficient thermomechanical properties, low economic feasibility (e.g., high relative cost), and reduced scalability in comparison to petroleum-based incumbents. Future biobased materials must overcome these limitations to be competitive in the marketplace. Additionally, sustainability challenges at the beginning and end of the polymer lifecycle need to be addressed using green chemistry practices and improved end-of-life waste management strategies. This viewpoint provides an overview of recent developments that can mitigate many concerns with present materials and discusses key aspects of next-generation, biobased polymers derived from lignocellulosic biomass.

Bio-based building blocks from 5-hydroxymethylfurfural via 1-hydroxyhexane-2,5-dione as intermediate

The limits to the supply of fossil resources and their ever increasing use forces us to think about future scenarios for fuels and chemicals. The platform chemical 5-hydroxymethyl-furfural (HMF) can be obtained from biomass in good yield and has the potential to be converted in just a few steps into a multitude of interesting products. Over the last 20 years, the conversion of HMF to 1-hydroxyhexane-2,5-dione (HHD) has been studied by several groups. It is possible to convert HMF into HHD by hydrogenation/hydrolytic ring opening reaction in aqueous phase using various heterogeneous and homogeneous catalysts. This review addresses both the state of the art of HHD synthesis, including mechanistic aspects of its formation, as well as the recent progress in the application of HHD as a building block for many useful chemicals including pyrroles, cyclopentanone derivatives and triols.

Synthesis of Ethyl-4-ethoxy Pentanoate by Reductive Etherification of Ethyl Levulinate in Ethanol on Pd/SiO2 -C Catalysts

The synthesis of biomass-derived ethers to be used as biofuels or biofuel additives has attracted much attention. Following the recently reported synthesis of etherified ester ethyl-4-ethoxy pentanoate (EEP) from γ-valerolactone (GVL) in ethanol catalyzed by H-beta zeolite, an alternative route to prepare EEP in high yield has been developed by reductive etherification of ethyl levulinate (EL) in ethanol at 140 °C under 0.5 MPa H₂ with a silica-modified Pd/C catalyst. The ether production likely follows a tandem acetalization-hydrogenolysis process with ethyl-4,4-diethoxy pentanoate (EDEP) as the intermediate. The acetalization step can be favored by introducing acidic materials, such as SiO₂ -carbon or beta zeolite, as a cocatalyst. The combination of the Pd/SiO₂ -C and beta zeolite mixture leads to 100 % EL conversion and 93 % EEP selectivity under optimized reaction conditions. For the first time, the standard molar combustion enthalpy of as-prepared EEP is measured by using a static oxygen bomb, and the value of which is determined to be about -5658 kJ mol^-1 , which is much larger than that of GVL (-2650 kJ mol^-1 ).

Cyclopentanone Derivatives from 5-Hydroxymethylfurfural via 1-Hydroxyhexane-2,5-dione as Intermediate

An efficient strategy for the conversion of biomass derived 5-hydroxymethylfurfural (HMF) into 2-hydroxy-3-methylcyclopent-2-enone (MCP) by an intramolecular aldol condensation of 1-hydroxyhexane-2,5-dione (HHD) has been developed. Further transformations of MCP towards the diol, enol acetate, levulinic acid and N-heterocyclic compounds are also reported.

The synthesis of HMF-based α-amino phosphonatesviaone-pot Kabachnik–Fields reaction

The first use of biomass-derived HMF in the one-pot Kabachnik–Fields reaction is reported here. A wide range of furan-based α-amino phosphonates were prepared in moderate to excellent yields under mild, effective and environmentally-benign conditions: iodine as a non-metal catalyst, biobased 2-MeTHF as the solvent and room or moderate temperature. The hydroxymethyl group of HMF persists in the Kabachnik–Fields products, widening the scope of further modification and derivatization compared to those arising from furfural. Issues involving the diastereoselectivity and double Kabachnik–Fields condensation were also faced.

A mild and efficient one-pot protocol for the synthesis of α-amino phosphonates directly from 5-HMF was described.