Polymer Based Hybrid Nanocomposites; A Progress Toward Enhancing Interfacial Interaction and Tailoring Advanced Applications

PANI–WO3·2H2O Nanocomposite: Phase Interaction and Evaluation of Electronic Properties by Combined Experimental Techniques and Ab-Initio Calculation

The development of conjugated polymer-based nanocomposites by adding metallic particles into the polymerization medium allows the proposition of novel materials presenting improved electrical and optical properties. Polyaniline Emeraldine-salt form (ES–PANI) has been extensively studied due to its controllable electrical conductivity and oxidation states. On the other hand, tungsten oxide (WO₃) and its di-hydrated phases, such as WO₃·2H₂O, have been reported as important materials in photocatalysis and sensors. Herein, the WO₃·2H₂O phase was directly obtained during the in-situ polymerization of aniline hydrochloride from metallic tungsten (W), allowing the formation of hybrid nanocomposites based on its full oxidation into WO₃·2H₂O. The developed ES–PANI–WO₃·2H₂O nanocomposites were successfully characterized using experimental techniques combined with Density Functional Theory (DFT). The formation of WO₃·2H₂O was clearly verified after two hours of synthesis (PW₂ nanocomposite), allowing the confirmation of purely physical interaction between matrix and reinforcement. As a result, increased electrical conductivity was verified in the PW₂ nanocomposite: the DFT calculations revealed a charge transfer from the p-orbitals of the polymeric phase to the d-orbitals of the oxide phase, resulting in higher conductivity when compared to the pure ES–PANI.

Light-Induced Polymer Response through Thermoplasmonics Transduction in Highly Monodisperse Core-Shell-Brush Nanosystems

Smart nanosystems that transduce external stimuli to physical changes are an inspiring challenge in current materials chemistry. Hybrid organic-inorganic materials attract great attention due to the combination of building blocks responsive to specific external solicitations. In this work, we present a sequential method for obtaining an integrated core-shell-brush nanosystem that transduces light irradiation into a particle size change through a thermoplasmonic effect. We first synthesize hybrid monodisperse systems made up of functionalized silica colloids covered with controllable thermoresponsive poly(N-isopropylacrylamide), PNIPAm, brushes, produced through radical photopolymerization. This methodology was successfully transferred to Au@SiO₂ nanoparticles, leading to a core-shell-brush architecture, in which the Au core acts as a nanosource of heat; the silica layer, in turn, adapts the metal and polymer interfacial chemistries and can also host a fluorescent dye for bioimaging. Upon green LED irradiation, a light-to-heat conversion process leads to the shrinkage of the external polymer layer, as proven by in situ DLS. Our results demonstrate that modular hybrid nanosystems can be designed and produced with photothermo-physical transduction. These remote-controlled nanosystems present prospective applications in smart carriers, responsive bioscaffolds, or soft robotics.

The Stability of Intercalated Sericite by Cetyl Trimethylammonium Ion under Different Conditions and the Preparation of Sericite/Polymer Nanocomposites

Layered silicates are suitable for use as fillers in nanocomposites based on their particular features, such as large aspect ratio, easy availability, and chemical resistance. Among them, sericite is distinguished for its higher aspect ratio, higher resilience, and ultraviolet shielding and absorption. Previously, sericite was structure-modified and intercalated by CTAB to expand its interlayer space. The intercalated sericite seems promising for use in the fabrication of polymer/sericite composites or pillared sericite. However, special attention should be paid to the stability of the intercalated sericite because the CTAB inside the layer may be de-intercalated, which would affect the interlayer spacing and its surface properties. In this article, the stability of the sericite intercalated by CTAB was tested by changing different variables, such as different washing solvents, different temperatures, ultrasonic cleaning, and different solution conditions. Finally, sericite/polymer nanocomposites were produced with the stable intercalated sericite, and showed excellent properties compared with pure epoxy resin.

Preparation of Prussian Blue Containing Polymeric Nanocapsule via Interfacial Confined Coordination in Crosslinked Inverse Miniemulsion

This work presents a simple and facile strategy for the creation of Prussian blue containing polymeric nanocapsules. An crosslinked inverse miniemulsion with a formula of water/ K₄Fe(CN)₆/1,2-bis-(-2-iodoethyl) ethane(BIEE)/ toluene/ PDMAEMA-b-PS stabilizer mixture was prepared as soft template firstly. A crosslinking nanocapsule structure with K₄Fe(CN)₆ in water core could be achieved by a crosslinking reaction between PDMAEMA-b-PS stabilizers and BIEE. Upon the following addition of FeCl₃ ether solution into the oil phase of this inverse miniemulsion, a coordination reaction between two iron salts occurred immediately to form a Prussian blue complex. Due to the solubility limitation of FeCl₃ in the oil phase of the miniemulsion, forcing the coordination reaction of K₄Fe(CN)₆ and FeCl₃ mainly occurred at the oil-water interface of the nanocapsules, resulting in a soft polymer/Prussian blue(PB) hybrid nanocapsule.

Green Synthesis of Carbon Nanotubes-Reinforced Molecularly Imprinted Polymer Composites for Drug Delivery of Fenbufen

The facile fabrication of single-walled carbon nanotubes (SWCNTs)-doping molecularly imprinted polymer (MIP) nanocomposite-based binary green porogen system, room-temperature ionic liquids (RTILs), and deep eutectic solvents (DESs) was developed for drug delivery system. With fenbufen (FB) as template molecule, 4-vinylpyridine (4-VP) was used as functional monomer, ethylene glycol dimethacrylate as cross-linking monomer, and 1-butyl-3-methylimidazoliumtetrafluoroborate and choline chloride/ethylene glycol as binary green solvent, in the presence of SWCNTs. The imprinting effect of the SWCNT-MIP composites was optimized by regulation of the amount of SWCNTs, ratio of RTILs and DES, and the composition of DES. Blue shifts of UV bands strongly suggested that interaction between 4-VP and FB can be enhanced due to SWCNT doping in the process of self-assembly. The reinforced imprinted effect of CNT-doping MIP can provide superior controlled release characteristics. Compared with the control MIP prepared without SWCNTs, the imprinting factor of the SWCNT-MIP composites exhibited a twofold increase. In the analysis for the FB release kinetics from all samples, the SWCNT-reinforced MIP produced the lowest value of drug diffusivity. The relative bioavailability of the SWCNT-MIP composites (F %) displayed the highest value of 143.3% compared with the commercial FB tablet, whereas the control MIP and SWCNT-non-MIP composites was only 48.3% and 44.4%, respectively. The results indicated that the SWCNT-MIP nanocomposites developed here have potentials as the controlled-release device.