Recent Advances Utilized in the Recycling of Homogeneous Catalysis

Magnetically Recyclable Borane Lewis Acid Catalyst for Hydrosilylation of Imines and Reductive Amination of Carbonyls

Fluorinated arylborane-based Lewis acid catalysts have shown remarkable activity and serve as ideal examples of transition metal-free catalysts for diverse organic transformations. However, their homogeneous nature poses challenges in terms of recyclability and separation from reaction mixtures. This work presents an efficient technique for the heterogenization of boron Lewis acid catalysts by anchoring Piers' borane to allyl-functionalized iron oxide. This catalyst demonstrates excellent activity in the hydrosilylation of imines and the reductive amination of carbonyls using various silanes as reducing agents under mild reaction conditions. The catalyst exhibits broad tolerance towards a wide range of functional substrates. Furthermore, it exhibits good recyclability and can be easily separated from the products using an external magnetic field. This work represents a significant advance in the development of sustainable heterogenous metal-free catalysts for organic transformations.

3-(Sulfamic acid)-propyltriethoxysilane on biochar nanoparticles as a practical, biocompatible, recyclable and chemoselective nanocatalyst in organic reactions

Recyclable and inexpensive catalysts, waste regeneration, use of available and safe solvents are important principles of green chemistry. Therefore, in this project, biochar nanoparticles (BNPs) were synthesized by the pyrolysis method from chicken manure. Then, 3-(sulfamic acid)-propyltriethoxysilane (SAPES) was immobilized on the surface of BNPs (SAPES@BNPs). The prepared catalyst (SAPES@BNPs) was used as a commercial, practical, biocompatible and reusable catalyst in the selective oxidation of sulfides to sulfoxides. Further, the catalytic application of SAPES@BNPs was explored in the multicomponent synthesis of tetrahydrobenzo[b]pyrans under mild and green conditions. BNPs were characterized using SEM, TGA and XRD techniques. SAPES@BNPs were characterized using SEM, FT-IR spectroscopy, WDX, EDS, TGA, and XRD techniques. Particle size distribution was obtained by histogram graph. SAPES@BNPs can be recovered and reused several times. The purity of the products was studied using NMR spectroscopy.

Palladium(II)-immobilized Triptycene based Hypercrosslinked Polymers: An Efficient, Green, and Reusable Heterogenous Catalyst for Suzuki-Miyaura Cross-coupling Reaction

The Suzuki-Miyaura cross-coupling (SMCC) involves the coupling of organohalides and organoboron molecules in the presence of Pd(II)-based catalysts. Often SMCC reactions employ homogenous catalysts. However, such homogenous SMCC reactions are associated with certain limitations which has motivated design of effective and sustainable Pd(II)-based heterogeneous catalytic systems. Herein, we report a systematic development of a Pd(II)-immobilized and triptycene based ionic hyper crosslinked polymer (Pd@TP-iHCP) and explored its application as a heterogeneous catalyst for SMCC reaction. Pd@TP-iHCP has ample N-heterocyclic carbene (NHC) pendants that anchor Pd(II) centres on the polymeric matrix. Pd@TP-iHCP was characterized satisfactorily using FT-IR, 13 C CP-MAS NMR, BET surface area analysis, SEM, EDX and HRTEM. The performance of Pd@TP-iHCP as a heterogeneous catalyst for SMCC reactions was explored using various combinations of aryl boronic acids and aryl halides. Experimental results show that Pd@TP-iHCP is associated with a moderately high surface area. It is an efficient catalyst for SMCC (in aqueous media) with a modest loading of 0.8 mol % Pd(II)-catalyst since high yields of the expected products were obtained in shorter time intervals. Pd@TP-iHCP also features excellent stability and catalyst recyclability since it could be re-used for several cycles without any significant decrease in catalytic efficiency.

2D Covalent Organic Framework Membranes for Liquid-Phase Molecular Separations: State of the Field, Common Pitfalls, and Future Opportunities

2D covalent organic frameworks (2D COFs) are attractive candidates for next-generation membranes due to their robust linkages and uniform, tunable pores. Many publications have claimed to achieve selective molecular transport through COF pores, but reported performance metrics for similar networks vary dramatically, and in several cases the reported experiments are inadequate to support such conclusions. These issues require a reevaluation of the literature. Published examples of 2D COF membranes for liquid-phase separations can be broadly divided into two categories, each with common performance characteristics: polycrystalline COF films (most >1 µm thick) and weakly crystalline or amorphous films (most <500 nm thick). Neither category has demonstrated consistent relationships between the designed COF pore structure and separation performance, suggesting that these imperfect materials do not sieve molecules through uniform pores. In this perspective, rigorous practices for evaluating COF membrane structures and separation performance are described, which will facilitate their development toward molecularly precise membranes capable of performing previously unrealized chemical separations. In the absence of this more rigorous standard of proof, reports of COF-based membranes should be treated with skepticism. As methods to control 2D polymerization improve, precise 2D polymer membranes may exhibit exquisite and energy efficient performance relevant for contemporary separation challenges.

SnAg2O3-Coated Adhesive Tape as a Recyclable Catalyst for Efficient Reduction of Methyl Orange

Silver oxide-doped tin oxide (SnAg2O3) nanoparticles were synthesized and different spectroscopic techniques were used to structurally identify SnAg2O3 nanoparticles. The reduction of 4-nitrophenol (4-NP), congo red (CR), methylene blue (MB), and methyl orange (MO) was studied using SnAg2O3 as a catalyst. Only 1.0 min was required to reduce 95% MO; thus, SnAg2O3 was found to be effective with a rate constant of 3.0412 min-1. Being a powder, SnAg2O3 is difficult to recover and recycle multiple times. For this reason, SnAg2O3 was coated on adhesive tape (AT) to make it recyclable for large-scale usage. SnAg2O3@AT catalyst was assessed toward MO reduction under various conditions. The amount of SnAg2O3@AT, NaBH4, and MO was optimized for best possible reduction conditions. The catalyst had a positive effect since it speed up the reduction of MO by adding more SnAg2O3@AT and NaBH4 as well as lowering the MO concentration. SnAg2O3@AT totally reduced MO (98%) in 3.0 min with a rate constant of 1.3669 min-1. These findings confirmed that SnAg2O3@AT is an effective and useful catalyst for MO reduction that can even be utilized on a large scale for industrial purposes.

Supramolecular Cu(ii) nanoparticles supported on a functionalized chitosan containing urea and thiourea bridges as a recoverable nanocatalyst for efficient synthesis of 1H-tetrazoles

A cost-effective and convenient method for supporting of Cu(ii) nanoparticles on a modified chitosan backbone containing urea and thiourea bridges using thiosemicarbazide (TS), pyromellitic dianhydride (PMDA) and toluene-2,4-diisocyanate (TDI) linkers was designed. The prepared supramolecular (CS-TDI-PMDA-TS-Cu(ii)) nanocomposite was characterized by using Fourier-transform infrared (FT-IR) spectroscopy, field emission scanning electron microscopy (FESEM), thermogravimetry/differential thermogravimetry analysis (TGA/DTA), energy-dispersive X-ray spectroscopy (EDS), EDS elemental mapping and X-ray diffraction (XRD). The obtained supramolecular CS-TDI-PMDA-TS-Cu(ii) nanomaterial was demonstrated to act as a multifunctional nanocatalyst for promoting of multicomponent cascade Knoevenagel condensation/click 1,3-dipolar azide-nitrile cycloaddition reactions very efficiently between aromatic aldehydes, sodium azide and malononitrile under solvent-free conditions and affording the corresponding (E)-2-(1H-tetrazole-5-yl)-3-arylacrylenenitrile derivatives. Low catalyst loading, working under solvent-free conditions and short reaction time as well as easy preparation and recycling, and reuse of the catalyst for five consecutive cycles without considerable decrease in its catalytic efficiency make it a suitable candidate for the catalytic reactions promoted by Cu species.

A Supported Catalyst that Enables the Synthesis of Colorless CO2 -Polyols with Ultra-Low Molecular Weight

Ultra-low molecular weight (ULMW) CO2 -polyols with well-defined hydroxyl end groups represent useful soft segments for the preparation of high-performance polyurethane foams. However, owing to the poor proton tolerance of catalysts towards CO2 /epoxide telomerization, it remains challenging to synthesize ULMW yet colorless CO2 -polyols. Herein, we propose an immobilization strategy of constructing supported catalysts by chemical anchoring of aluminum porphyrin on Merrifield resin. The resulting supported catalyst displays both extremely high proton tolerance (≈8000 times the equivalents of metal centers) and independence of cocatalyst, affording CO2 -polyols with ULMW (580 g mol-1 ) and high polymer selectivity (>99 %). Moreover, the ULMW CO2 -polyols with various architectures (tri-, quadra-, and hexa-arm) can be obtained, suggesting the wide proton universality of supported catalysts. Notably, benefiting from the heterogeneous nature of the supported catalyst, colorless products can be facilely achieved by simple filtration. The present strategy provides a platform for the synthesis of colorless ULMW polyols derived from not only CO2 /epoxides, but also lactone, anhydrides etc. or their combinations.

High-value utilisation of PGM-containing residual oil: Recovery of inorganic acids, potassium, and PGMs using a zero-waste approach

Residual oil containing platinum group metals (PGMs), which is under-researched, can easily pose resource waste and environmental risks. PGMs feature as scarce strategic metals, and inorganic acids and potassium salts are also considered valuable. An integrated process for the harmless treatment and recovery of useful resources from residual oil is proposed herein. This work developed a zero-waste process based on the study of the main components and characteristics of the PGM-containing residual oil. The process consists of three modules: pre-treatment for phase separation, liquid-phase resource utilisation, and solid-phase resource utilisation. Separating the residual oil into liquid and solid phases allows for the maximum recovery of valuable components. However, concerns about the accurate determination of valued components emerged. Findings revealed that Fe and Ni are highly susceptible to spectral interference in the PGMs test when using the inductively coupled plasma method. After studying 26 PGM emission lines, Ir 212.681 nm, Pd 342.124 nm, Pt 299.797 nm, and Rh 343.489 nm were reliably identified. Finally, formic acid (81.5 g/t), acetic acid (117.2 kg/t), propionic acid (291.9 kg/t), butyric acid (3.6 kg/t), potassium salt (553.3 kg/t), Ir (27.8 g/t), Pd (10960.0 g/t), Pt (193.1 g/t), and Rh (109.8 g/t) were successfully obtained from the PGM-containing residual oil. This study provides a helpful reference for the determination of PGM concentrations and high-value utilisation of PGM-containing residual oil.

A Review of Biomass-Derived Heterogeneous Catalysts for Biodiesel Production

The scientific community is being forced to consider alternative renewable fuels such as biodiesel as a result of the sharp increases in the price of petroleum and the increased demand for petroleum-derived products. Transesterification is a technique used to create biodiesel where a variety of edible oils, non-edible oils, and animal fats are used. For this, either a homogeneous or heterogeneous catalyst is utilized. An appropriate catalyst is chosen based on the quantity of free fatty acid content in the oil. The main distinction between homogeneous and heterogeneous catalysts is that compared to the heterogeneous catalyst, the homogeneous catalyst is not affected by the quantity of free fatty acids in the oil. Early methods of producing biodiesel relied on homogeneous catalysts, which have drawbacks such as high flammability, toxicity, corrosion, byproducts such as soap and glycerol, and high wastewater output. The majority of these issues are solved by heterogeneous catalysts. Recent innovations use novel heterogeneous catalysts that are obtained from biomass and biowaste resources. Numerous researchers have documented the use of biomass-derived heterogeneous catalysts in the production of high-quality, pure biodiesel as a potentially greener manufacturing method. The catalysts were significantly altered through conventional physical processes that were both cost- and energy-effective. The present review is intended to analyze catalysts from biowaste for making biodiesel at a minimal cost. The most recent methods for creating diverse kinds of catalysts—including acidic, basic, bifunctional, and nanocatalysts—from various chemicals and biomass are highlighted in this review. Additionally, the effects of various catalyst preparation methods on biodiesel yield are thoroughly explored.

Investigation of Fe3O4@boehmite NPs as efficient and magnetically recoverable nanocatalyst in the homoselective synthesis of tetrazoles

Magnetic boehmite nanoparticles (Fe3O4@boehmite NPs) were synthesized from a hybrid of boehmite and Fe3O4 nanoparticles. At first, boehmite nanoparticles (aluminum oxide hydroxide) were prepared via a simple procedure in water using commercially available materials such as sodium hydroxide and aluminum nitrate. Then, these nanoparticles were magnetized using Fe3O4 NPs in a basic solution of FeCl2·4H2O and FeCl3·6H2O. Fe3O4@boehmite NPs have advantages of both boehmite nanoparticles and Fe3O4 magnetic materials. Magnetic boehmite nanoparticles have been characterized by various techniques such as TEM, SEM, EDS, WDX, ICP, FT-IR, Raman, XRD and VSM. SEM and TEM images confirmed that particles size are less than 50 nm in diameter with a cubic orthorhombic structure. Then, Fe3O4@boehmite NPs were applied as a homoselective, highly efficient, cheap, biocompatibility, heterogeneous and magnetically recoverable nanocatalyst in the synthesis of 5-substituted 1H-tetrazole derivatives. Fe3O4@boehmite NPs can be recycled for several runs in the synthesis of tetrazoles. Also, all tetrazoles were isolated in high yields, which reveals high activity of Fe3O4@boehmite NPs in the synthesis of tetrazole derivatives. Fe3O4@boehmite NPs shows a good homoselectivity in synthesis of 5-substituted 1H-tetrazole derivatives.

Branched Tertiary Amines from Aldehydes and α-Olefins by Combined Multiphase Tandem Reactions

This study presents the transformation of olefins to branched amines by combining a hydroformylation/aldol condensation tandem reaction with the reductive amination in a combined multiphase system that can be recycled 9 times. The products are branched amines that are precursors for surfactants. Since the multiphase hydrofomylation/aldol condensation system has already been studied, the first step was to develop the partial hydrogenation of unsaturated aldehydes together with a subsequent reductive amination. The rhodium/phosphine catalyst is immobilized in a polar polyethylene phase which separates from the product phase after the reaction. Reaction and catalyst recycling are demonstrated by the conversion of the C14 -aldehyde 2-pentylnonenal with the dimethylamine surrogate dimethylammonium dimethylcarbamate to the corresponding tertiary amine with yields up to 88 % and an average rhodium leaching of less than 0.1 % per recycling run. Furthermore, the positive influence of a Bronsted acid and carbon monoxide on the selectivity are discussed. Finally, the two PEG based systems have been merged in one recycling approach, by using the product phase of the hydroformylation aldol condensation reaction for the reductive amination reaction. The yields are stable during a nine recycling runs and the leaching low with 0.09 % over the two recycling stages.

Endohedrally Functionalized Metal-Organic Cage-Cross-Linked Polymer Gels as Modular Heterogeneous Catalysts

The immobilization of homogeneous catalysts onto supports to improve recyclability while maintaining catalytic efficiency is often a trial-and-error process limited by poor control of the local catalyst environment and few strategies to append catalysts to support materials. Here, we introduce a modular heterogenous catalysis platform that addresses these challenges. Our approach leverages the well-defined interiors of self-assembled Pd₁₂L₂₄ metal-organic cages/polyhedra (MOCs): simple mixing of a catalyst-ligand of choice with a polymeric ligand, spacer ligands, and a Pd salt induces self-assembly of Pd₁₂L₂₄-cross-linked polymer gels featuring endohedrally catalyst-functionalized junctions. Semi-empirical calculations show that catalyst incorporation into the MOC junctions of these materials has minimal affect on the MOC geometry, giving rise to well-defined nanoconfined catalyst domains as confirmed experimentally using several techniques. Given the unique network topology of these freestanding gels, they are mechanically robust regardless of their endohedral catalyst composition, allowing them to be physically manipulated and transferred from one reaction to another to achieve multiple rounds of catalysis. Moreover, by decoupling the catalyst environment (interior of MOC junctions) from the physical properties of the support (the polymer matrix), this strategy enables catalysis in environments where homogeneous catalyst analogues are not viable, as demonstrated for the Au(I)-catalyzed cyclization of 4-pentynoic acid in aqueous media.

Nucleophilic Fluorination Catalyzed by a Cyclometallated Rhodium Complex

Quantitative catalytic nucleophilic fluorination of a range of acyl chlorides to acyl fluorides was promoted by a cyclometallated rhodium complex [(η5,κ2C-C5Me4CH2C6F5CH2NC3H2NMe)- RhCl] (1). 1 can be prepared in high yields from commercially available starting materials using a one-pot method. The catalyst could be separated, regenerated, and reused. Rapid quantitative fluorination generated the fluoride analogue of the active pharmaceutical ingredient probenecid. Infrared in situ monitoring verified the clean conversion of the substrates to products. VTNA graphical kinetic analysis and DFT calculations lead to a postulated reaction mechanism involving a nucleophilic Rh-F bond.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Adaptive Synthesis of Functional Amphiphilic Dendrons as a Novel Approach to Artificial Supramolecular Objects

Supramolecular structures, such as micelles, liposomes, polymerosomes or dendrimerosomes, are widely studied and used as drug delivery systems. The behavior of amphiphilic building blocks strongly depends on their spatial distribution and shape of polar and nonpolar component. This report is focused on the development of new versatile synthetic protocols for amphiphilic carbosilane dendrons (amp-CS-DDNs) capable of self-assembly to regular micelles and other supramolecular objects. The presented strategy enables the fine modification of amphiphilic structure in several ways and also enables the facile connection of a desired functionality. DLS experiments demonstrated correlations between structural parameters of amp-CS-DDNs and the size of formed nanoparticles. For detailed information about the organization and spatial distribution of amp-CS-DDNs assemblies, computer simulation models were studied by using molecular dynamics in explicit water.

Chemo-selective control of Ritter-type reaction by coordinatively unsaturated inorganic salt hydrates

We used a readily available water source, MgSO4·2H2O, to realize the control of the chemo-selectivity of the Ritter-type reaction efficiently.

Heterometallic CeIV/ VV Oxo Clusters with Adjustable Catalytic Reactivities

Heterometallic Ce^IV/M oxo clusters are underexplored yet and can benefit from synergistic properties from combining cerium and other metal cations to produce efficient redox catalysts. Herein, we designed and synthesized a series of new Ce₁₂V₆ oxo clusters with different capping ligands: Ce₁₂V₆-SO₄, Ce₁₂V₆-OTs (OTs: toluenesulfonic acid), and Ce₁₂V₆-NBSA (NBSA: nitrobenzenesulfonic acid). Single crystal X-ray diffraction (SCXRD) for all three structures reveals a Ce₁₂V₆ cubane core formulated [Ce₁₂(VO)₆O₂₄]¹⁸⁺ with cerium on the edges of the cube, vanadyl capping the faces, and sulfate on the corners. While infrared spectroscopy (IR), ultraviolet-visible spectroscopy (UV-vis), electrospray ionization mass spectrometry (ESI-MS), and proton nuclear magnetic resonance (¹H NMR) proved the successful coordination of the organic ligands to the Ce₁₂V₆ core, liquid phase ⁵¹V NMR and small-angle X-ray scattering (SAXS) confirmed the integrity of the clusters in the organic solutions. Furthermore, functionalization of the Ce₁₂V₆ core with organic ligands both provides increased solubility in term of homogeneous application and introduces porosity to the assemblies of Ce₁₂V₆-OTs and Ce₁₂V₆-NBSA in term of heterogeneous application, thus allowing more catalytic sites to be accessible and improving reactivity as compared to the nonporous and less soluble Ce₁₂V₆-SO₄. Meanwhile, the coordinated ligands also influenced the electronic environment of the catalytic sites, in turn affecting the reactivity of the cluster, which we probed by the selective oxidation of 2-chloroethyl ethyl sulfide (CEES). This work provides a strategy to make full use of the catalytic sites within a class of inorganic sulfate capped clusters via organic ligand introduction.

Recent Advancement of Ullmann Condensation Coupling Reaction in the Formation of Aryl-Oxygen (C-O) Bonding by Copper-Mediated Catalyst

Transition metal-catalyzed chemical transformation of organic electrophiles and organometallic reagents belong to the most important cross coupling reaction in organic synthesis. The biaryl ether division is not only popular in natural products and synthetic pharmaceuticals but also widely found in many pesticides, polymers, and ligands. Copper catalyst has received great attention owing to the low toxicity and low cost. However, traditional Ullmann-type couplings suffer from limited substrate scopes and harsh reaction conditions. The introduction of homogeneous copper catalyst with presence of bidentate ligands over the past two decades has totally changed this situation as these ligands enable the reaction promoted in mild condition. The reaction scope has also been greatly expanded, rendering this copper-based cross-coupling attractive for both academia and industry. In this review, we will highlight the latest progress in the development of useful homogeneous copper catalyst with presence of ligand and heterogeneous copper catalyst in Ullmann type C-O cross-coupling reaction. Additionally, the application of Ullmann type C-O cross coupling reaction will be discussed.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Ru-Catalyzed Repetitive Batch Borylative Coupling of Olefins in Ionic Liquids or Ionic Liquids/scCO2 Systems

The first, recyclable protocol for the selective synthesis of (E)-alkenyl boronates via borylative coupling of olefins with vinylboronic acid pinacol ester in monophasic (cat@IL) or biphasic (cat@IL/scCO2) systems is reported in this article. The efficient immobilization of [Ru(CO)Cl(H)(PCy3)2] (1 mol%) in [EMPyr][NTf2] and [BMIm][OTf] with the subsequent extraction of products with n-heptane permitted multiple reuses of the catalyst without a significant decrease in its activity and stability (up to 7 runs). Utilization of scCO2 as an extractant enabled a significant reduction in the amount of catalyst leaching during the separation process, compared to extraction with n-heptane. Such efficient catalyst immobilization allowed an intensification of the processes in terms of its productivity, which was indicated by high cumulative TON values (up to 956) in contrast to the traditional approach of applying volatile organic solvents (TON = ~50–100). The reaction was versatile to styrenes with electron-donating and withdrawing substituents and vinylcyclohexane, generating unsaturated organoboron compounds, of which synthetic utility was shown by the direct transformation of extracted products in iododeborylation and Suzuki coupling processes. All synthesized compounds were characterized using 1H, 13C NMR and GC-MS, while leaching of the catalyst was detected with ICP-MS.

Isolation of Living Conjugated Polymer Chains

Living polymerizations currently play a central role in polymer chemistry. However, one feature of these polymerizations is often overlooked, namely, the isolation of living polymer chains. Herein we report the isolation of living π-conjugated polymer chains, synthesized by catalyst-transfer polycondensation. Successful preservation of the nickel complex at polymer chain ends is evidenced by nuclear magnetic resonance spectroscopy, end group analysis, and chain extension experiments. When characterizing living chains by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, we discovered a unique photoionization-photodissociation fragmentation process for polymers containing a nickel phosphine end group. Living chains are isolated for several types of conjugated polymers as well as discrete living oligomers. Additionally, we are able to recycle the catalysts from the isolated polymer chains. Catalyst recycling after π-conjugated polymerization has previously been impossible without chain isolation. This strategy not only exhibits general applicability to different monomers but also has far-reaching potential for other catalytic systems.

Chitosan modified Ti-PILC supported PdOx catalysts for coupling reactions of aryl halides with terminal alkynes

Biopolymer of chitosan (CS) and titanium pillared clays (Ti-PILCs) have been combined in a hybrid as advanced supports for immobilization of PdOx=0,1 species to prepare novel PdOx=0,1@Ti-PILC/CS nano-composite catalysts. The Ti-PILC materials showed high specific surface areas and abundant meso-porous structure with many irregular pore channels caused by collapses of layered structure of clay during Ti pillaring process. Both CS chains and sub-nano sized PdOx particles were successfully incorporated into the pore channels of Ti-PILC, resulting in a decrease in both the specific surface areas and uniform distribution of pore size. Besides conventional methods characterizations, the strong interactions between PdOx species and Ti-PILC/CS support were further evidenced with positron annihilation lifetime spectroscopy studies. The resultant PdOx@Ti-PILC/CS catalyst was highly active for the coupling reactions of aryl halides with phenyl acetylenes. It was recyclable and gave excellent yield up to 13 runs with low leaching of Pd species.

Plasma-Assisted Immobilization of a Phosphonium Salt and Its Use as a Catalyst in the Valorization of CO2

The first plasma-assisted immobilization of an organocatalyst, namely a bifunctional phosphonium salt in an amorphous hydrogenated carbon coating, is reported. This method makes the requirement for prefunctionalized supports redundant. The immobilized catalyst was characterized by solid-state ¹³ C and ³¹ P NMR spectroscopy, SEM, and energy-dispersive X-ray spectroscopy. The immobilized catalyst (1 mol %) was employed in the synthesis of cyclic carbonates from epoxides and CO₂ . Notably, the efficiency of the plasma-treated catalyst on SiO₂ was higher than those of the SiO₂ support impregnated with the catalyst and even the homogeneous counterpart. After optimization of the reaction conditions, 13 terminal and four internal epoxides were converted with CO₂ to the respective cyclic carbonates in yields of up to 99 %. Furthermore, the possibility to recycle the immobilized catalyst was evaluated. Even though the catalyst could be reused, the yields gradually decreased from the third run. However, this is the first example of the recycling of a plasma-immobilized catalyst, which opens new possibilities in the recovery and reuse of catalysts.

Developing Multicompartment Biopolymer Hydrogel Beads for Tandem Chemoenzymatic One-Pot Process

Chemoenzymatic processes have been gaining interest to implement sustainable reaction steps or even create new synthetic routes. In this study, we combined Grubbs’ second-generation catalyst with pig liver esterase and conducted a chemoenzymatic one-pot process in a tandem mode. To address sustainability, we encapsulated the catalysts in biopolymer hydrogel beads and conducted the reaction cascade in an aqueous medium. Unfortunately, conducting the process in tandem led to increased side product formation. We then created core-shell beads with catalysts located in different compartments, which notably enhanced the selectivity towards the desired product compared to homogeneously distributing both catalysts within the matrix. Finally, we designed a specific large-sized bead with a diameter of 13.5 mm to increase the diffusion route of the Grubbs’ catalyst-containing shell. This design forced the ring-closing metathesis to occur first before the substrate could diffuse into the pig liver esterase-containing core, thus enhancing the selectivity to 75%. This study contributes to addressing reaction-related issues by designing specific immobilisates for chemoenzymatic processes.