Carbon-Based Capacitive Deionization Electrodes: Development Techniques and its Influence on Electrode Properties

Development of Composite Nanostructured Electrodes for Water Desalination via Membrane Capacitive Deionization

Novel two-layer nanostructured electrodes are successfully prepared for their application in membrane capacitive deionization (MCDI) processes. Nanostructured carbonaceous materials such as graphene oxide (GO) and carbon nanotubes (CNTs), as well as activated carbon (AC) are dispersed in a solution of poly(vinyl alcohol) (PVA), mixed with polyacrylic acid (PAA) or polydimethyldiallylammonium chloride (PDMDAAC), and subsequently cast on the top surface of an AC-based modified graphite electrode to form a thin composite layer that is cross-linked with glutaraldehyde (GA). Cyclic voltammetry (CV) is performed to investigate the electrochemical properties of the composite electrodes and desalination experiments are conducted in batch mode using a MCDI unit cell to investigate the effects of i) the nanostructured carbonaceous material, ii) its concentration in the polymer blend, and iii) the molecular weight of the polymers on the desalination efficiency of the system. Comparative studies with commercial membranes are performed proving that the composite nanostructured electrodes are more efficient in salt removal. The improved performance of the composite electrodes is attributed to the ion exchange properties of the selected polymers and the increased specific capacitance of the nanostructured carbonaceous materials. This research paves the way for wider application of MCDI in water desalination.

Development of nitric acid-modified activated carbon electrode for removal of Co2+/Mn2+/Ni2+ by electrosorption

In this paper, nitric acid-modified activated carbon was used as an electrode in the electrosorption process for the removal of Co²⁺, Mn²⁺, and Ni²⁺ from wastewater. The effects of applied voltage, initial pH, and coexisting ions on removal efficiency were investigated. The adsorption process was evaluated by adsorption isotherm models. The results indicated that the electrosorption process was consistent with the Langmuir model, proving that the electrosorption process was a monolayer adsorption process. The maximum adsorption capacities of Co²⁺, Mn²⁺, and Ni²⁺ were 131.58 mg/g, 102.04 mg/g, and 103.09 mg/g. Electrochemical tests revealed that the specific capacitance of AC-HNO₃ was 54.11 F/g when the scanning rate was 5 mV/s, while the specific capacitance of AC was 36.51 F/g. The Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) confirmed that the content of oxygen groups on the surface of activated carbon increased after modification, which provided more adsorption sites for electrosorption. When the selected concentration of HCl was used as the eluent, the elution efficiency of Co²⁺, Mn²⁺, and Ni²⁺ could reach 94.23%, 93.65%, and 90.61%. The removal efficiency could reach more than 95% after three cycles. The results of the study can be used as a reference significance for the removal of cobalt, manganese, and nickel ions from heavy metal wastewater by electrosorption.

Recent progress in materials and architectures for capacitive deionization: A comprehensive review

Capacitive deionization is an emerging and rapidly developing electrochemical technique for water desalination across the globe with exponential growth in publications. There are various architectures and materials being explored to obtain utmost electrosorption performance. The symmetric architectures consist of the same material on both electrodes, while asymmetric architectures have electrodes loaded with different materials. Asymmetric architectures possess higher electrosorption performance as compared with that of symmetric architectures owing to the inclusion of either faradaic materials, redox-active electrolytes, or ion specific pre-intercalation material. With the materials perspective, faradaic materials have higher electrosorption performance than carbon-based materials owing to the occurrence of faradaic reactions for electrosorption. Moreover, the architecture and material may be tailored in order to obtain desired selectivity of the target component and heavy metal present in feed water. In this review, we describe recent developments in architectures and materials for capacitive deionization and summarize the characteristics and salt removal performances. Further, we discuss recently reported architectures and materials for the removal of heavy metals and radioactive materials. The factors that affect the electrosorption performance including the synthesis procedure for electrode materials, incorporation of additives, operational modes, and organic foulants are further illustrated. This review concludes with several perspectives to provide directions for further development in the subject of capacitive deionization. PRACTITIONER POINTS: Capacitive deionization (CDI) is a rapidly developing electrochemical water desalination technique with exponential growth in publications. Faradaic materials have higher salt removal capacity (SAC) because of reversible redox reactions or ion-intercalation processes. Combination of CDI with other techniques exhibits improved selectivity and removal of heavy metals. Operational parameters and materials properties affect SAC. In future, comprehensive experimentation is needed to have better understanding of the performance of CDI architectures and materials.