Advances in Graphene/Inorganic Nanoparticle Composites for Catalytic Applications

One-pot synthesis of monodisperse silver-lignin particles: Enhanced antibacterial agents against antibiotic-resistant bacteria

Lignin-based supports for metal nanoparticles (NPs) have attracted significant attention due to their abundant functional groups that facilitate NPs loading. However, many studies involve a two-step process: fabricating lignin particles and then reducing metal ions to NPs using physical energy consumption or chemical reduction. A one-step in-situ reduction method for NP synthesis on carrier surfaces, eliminating energy consumption, is needed for environmentally friendly and sustainable approach. Herein, we demonstrate that poly-l-lysine (PL) controls the self-assembly kinetics of kraft lignin (KL), and reduces silver ion (Ag+) to silver nanoparticles (AgNPs), forming highly monodisperse, co-self-assembled PL-KL particles (Ag@PL-KLPs) without chemical reducing agents or energy consumption. PL facilitated rapid KL desolvation, promoting intermolecular interactions and silver ion adsorption, followed by an efficient, separate nucleation and growth process yielded Ag@PL-KLPs approximately 270 nm in size with a narrow distribution. Notably, Ag@PL-KLPs exhibited enhanced bacteriostatic and bactericidal properties against antibiotic-resistant bacteria (ARB), including both Gram-negative and Gram-positive strains, at concentrations of 250 μg/mL. Leveraging biomass-derived lignin and this cost-effective, one-step green synthesis approach offers a sustainable method for avoiding antibiotic overuse and environmental contamination.

Green hydrothermal synthesis and characterization of Ag2O-supported MgO/rGO nanocomposites by using Phoenix leaf extract: a promising approach for enhanced photocatalytic and anticancer activities

The present work was designed to synthesize Ag2O-supported MgO/rGO nanocomposites (NCs) via green method using Phoenix leaf extract for improved photocatalytic and anticancer activity. Green synthesized Ag2O-supported MgO/rGO NCs were characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), Raman, ultraviolet-visible (UV-vis) spectroscopy, and photoluminescence (PL) spectroscopy, and gas chromatography-mass spectroscopy (GC-MS) was applied to examine the chemical components of the Phoenix leaf extract. Characterization data confirmed the preparation of MgO NPs, Ag2O-MgO NCs, and Ag2O-MgO/rGO NC with particle size of 26-28 nm. UV-vis study exhibited that the band gap energy of MgO NPs, Ag2O-MgO NCs, and Ag2O-MgO/rGO NC were in the range of 3.53-3.43 eV. The photocatalytic results showed that the photodegradation of Rh B dye of Ag2O-supported MgO/rGO NCs (82.81%) was significantly higher than pure MgO NPs. Additionally, the biological response demonstrates that the Ag2O-supported MgO/rGO NCs induced high cytotoxicity against MCF-7 cancer cells for 24 h and 48 h compared with both pure MgO NPs and Ag2O-MgO NCs. This study suggests that the adding of Ag2O and rGO sheets played significant role in the enhanced photocatalytic and anticancer performance of MgO NPs.

Exploring Recent Developments in Graphene-Based Cathode Materials for Fuel Cell Applications: A Comprehensive Overview

Fuel cells are at the forefront of modern energy research, with graphene-based materials emerging as key enhancers of performance. This overview explores recent advancements in graphene-based cathode materials for fuel cell applications. Graphene's large surface area and excellent electrical conductivity and mechanical strength make it ideal for use in different solid oxide fuel cells (SOFCs) as well as proton exchange membrane fuel cells (PEMFCs). This review covers various forms of graphene, including graphene oxide (GO), reduced graphene oxide (rGO), and doped graphene, highlighting their unique attributes and catalytic contributions. It also examines the effects of structural modifications, doping, and functional group integrations on the electrochemical properties and durability of graphene-based cathodes. Additionally, we address the thermal stability challenges of graphene derivatives at high SOFC operating temperatures, suggesting potential solutions and future research directions. This analysis underscores the transformative potential of graphene-based materials in advancing fuel cell technology, aiming for more efficient, cost-effective, and durable energy systems.

Sintering of Platinum-Containing Conjugated Polymers: Gas Adsorption and Catalysis of the Formed Pt-Carbon Composites

Pt-containing meta- and para-linked poly(phenyleneethynylene)s were synthesized by the dehydrochlorination coupling polymerization of PtCl2(PBu3)2 with m- and p-diethynylbenzenes. The formed polymers were sintered at 900 °C to obtain Pt-graphene hybrids, whose structures were examined by Raman scattering spectroscopy, X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) measurements. Shapes─facets, terraces, and steps─with average diameters of 2.0-3.4 μm were observed by field emission scanning electron microscopy (FE-SEM). The Pt-graphene hybrids moderately adsorbed CO2 and O2 and slightly adsorbed ethylene and methane. Epoxidation of stilbene was carried out using Pt-graphene hybrids as catalysts to obtain stilbene oxide.

Morphology Controlled Deposition of Vanadium Oxide (VOx) Nanoparticles on the Surface of Highly Reduced Graphene Oxide for the Photocatalytic Degradation of Hazardous Organic Dyes

Semiconducting nanomaterials based heterogeneous photocatalysis represent a low-cost, versatile technique for environmental remediation, including pollution mitigation, energy management and other environmental aspects. Herein, we demonstrate the syntheses of various heterogeneous photocatalysts based on highly reduced graphene oxide (HRG) and vanadium oxide (VOx)-based nanocomposites (HRG-VOx). Different shapes (rod, sheet and urchin forms) of VOx nanoparticles were successfully fabricated on the surface of HRG under solvo-/hydrothermal conditions by varying the amount of water and ethanol. The high concentration of water in the mixture resulted in the formation of rod-shaped VOx nanoparticles, whereas increasing the amount of ethanol led to the production of VOx sheets. The solvothermal condition using pure ethanol as solvent produced VOx nano-urchins on the surface of HRG. The as-prepared hybrid materials were characterized using various spectroscopic and microscopic techniques, including X-ray diffraction, UV-vis, FTIR, SEM and TEM analyses. The photocatalytic activities of different HRG-VOx nanocomposites were investigated for the photodegradation of methylene blue (MB) and methyl orange (MO). The experimental data revealed that all HRG-VOx composite-based photocatalysts demonstrated excellent performance toward the photocatalytic degradation of the organic dyes. Among all photocatalysts studied, the HRG-VOx nanocomposite consisting of urchin-shaped VOx nanoparticles (HRG-VOx-U) demonstrated superior photocatalytic properties towards the degradation of dyes.

Antimicrobial, anticancer, and biofilm inhibition studies of highly reduced graphene oxide (HRG): In vitro and in silico analysis

Background: Bacterial infections and cancers may cause various acute or chronic diseases, which have become serious global health issues. This requires suitable alternatives involving novel and efficient materials to replace ineffective existing therapies. In this regard, graphene composites are being continuously explored for a variety of purposes, including biomedical applications, due to their remarkable properties. Methods: Herein, we explore, in-vitro, the different biological properties of highly reduced graphene oxide (HRG), including anti-cancer, anti-bacterial, and anti-biofilm properties. Furthermore, to analyze the interactions of graphene with proteins of microbes, in silico docking analysis was also carried out. To do this, HRG was prepared using graphene oxide as a precursor, which was further chemically reduced to obtain the final product. The as-prepared HRG was characterized using different types of microscopic and spectroscopic techniques. Results: The HRG revealed significant cytotoxic ability, using a dose-dependent anti-cell proliferation approach, which substantially killed human breast cancer cells (MCF-7) with IC50 of 29.51 ± 2.68 μg/mL. The HRG demonstrated efficient biological properties, i.e., even at low concentrations, HRG exhibited efficient anti-microbial properties against a variety of microorganisms. Among the different strains, Gram-positive bacteria, such as B. subtilis, MRSA, and S. aureus are more sensitive to HRG compared to Gram-negative bacteria. The bactericidal properties of HRG are almost similar to a commercially available effective antibiotic (ampicillin). To evaluate the efficacy of HRG against bacterial biofilms, Pseudomonas aeruginosa and MRSA were applied, and the results were compared with gentamycin and ampicillin, which are commonly applied standard antibiotics. Notably, HRG demonstrated high inhibition (94.23%) against P.aeruginosa, with lower MIC (50 μg/mL) and IC50 (26.53 μg/mL) values, whereas ampicillin and gentamicin showed similar inhibition (90.45% and 91.31% respectively) but much higher MIC and IC50 values. Conclusion: Therefore, these results reveal the excellent biopotential of HRG in different biomedical applications, including cancer therapy; antimicrobial activity, especially anti-biofilm activity; and other biomedicine-based therapies. Based on the molecular docking results of Binding energy, it is predicted that pelB protein and HRG would form the best stable docking complex, and high hydrogen and hydrophobic interactions between the pelB protein and HRG have been revealed. Therefore, we conclude that HRG could be used as an antibiofilm agent against P. aeruginosa infections.

Heterogenization of Heteropolyacid with Metal-Based Alumina Supports for the Guaiacol Gas-Phase Hydrodeoxygenation

Because of the global necessity to decrease CO₂ emissions, biomass-based fuels have become an interesting option to explore; although, bio-oils need to be upgraded, for example, by catalytic hydrodeoxygenation (HDO), to reduce oxygen content. This reaction generally requires bifunctional catalysts with both metal and acid sites. For that purpose, Pt-Al₂O₃ and Ni-Al₂O₃ catalysts containing heteropolyacids (HPA) were prepared. HPAs were added by two different methods: the impregnation of a H₃PW₁₂O₄₀ solution onto the support and a physical mixture of the support with Cs_2.5H_0.5PW₁₂O₄₀. The catalysts were characterized by powder X-ray diffraction, Infrared, UV-Vis, Raman, X-ray photoelectron spectroscopy and NH₃-TPD experiments. The presence of H₃PW₁₂O₄₀ was confirmed by Raman, UV-Vis and X-ray photoelectron spectroscopy, while the presence of Cs_2.5H_0.5PW₁₂O₄₀ was confirmed by all of the techniques. However, HPW was shown to strongly interact with the supports, especially in the case of Pt-Al₂O₃. These catalysts were tested in the HDO of guaiacol, at 300 °C, under H₂ and at atmospheric pressure. Ni-based catalysts led to higher conversion and selectivity to deoxygenated compound values, such as benzene. This is attributed to both a higher metal and acidic contents of these catalysts. Among all tested catalysts, HPW/Ni-Al₂O₃ was shown to be the most promising, although it suffered a more severe deactivation with time-on-stream.

Three-Dimensional Reduced Graphene Oxide Hybrid Nano-Silver Scaffolds with High Antibacterial Properties

In recent years, hazardous wastewater treatment has been a complex and global problem. In this work, by considering the antimicrobial activity of Ag nanoparticles (AgNPs) and reduced graphene oxide (rGO), we constructed an antibacterial device (G-AgNP) with AgNPs conformably deposited onto a 3D scaffold of reduced graphene oxide in situ. The major limitation, which is difficult to recycle, of two-dimensional graphene-silver composite materials in previous studies is improved. Characterization techniques, SEM, TEM, XRD, and XPS, confirmed the synthesis of nanocomposites. Attributed to its larger specific area, more active sites, and synergistic enhancement, the G-AgNP device demonstrated the best bacterial removal capacity, with an antibacterial rate for both E. coli and S. aureus as high as 100% at quite low AgNP contents. The reported G-AgNP has potential application as a wearable sewage treatment device and for the protection of wearable sensors as a promising sterilizing candidate based on its high and stable antibacterial efficiency.

Archaeal and bacterial ecological strategies in sediment denitrification under the influence of graphene oxide and different temperatures

As an emerging material, graphene oxide (GO) has been widely used in recent years and will inevitably enter into natural water bodies, and it may have an impact on lake microbial communities owing to its potential toxicity and denitrification-enhancing ability. This study simulated the effect of 0.1 g/L GO on denitrification in lake sediments under summer (28 °C) and winter temperatures (8 °C). GO promoted carbon source metabolism and denitrification. Phylogenetic bin-based null model analysis suggested that GO significantly altered the contribution of heterogeneous selection in bacterial and archaeal community assembly. The co-occurrence network indicated that bacterial communities responded to the enhancement of heterogeneous selection by strategies of enhancing positive correlation and shared niche, whereas archaeal communities adopted strategies of enhancing negative correlation and competition. Bacterial networks also emerged with more non-hub connector species that could drive changes in community structure. Our study contributed to the understanding of different ecological strategies adopted by bacterial and archaeal communities in response to changes in ecological selection driven by GO.