Scientific Challenges and Improvement Strategies of Zn-Based Anodes for Aqueous Zn-Ion Batteries

Achieving Planar Zn Electroplating in Aqueous Zinc Batteries with Cathode-Compatible Current Densities by Cycling under Pressure

The value of aqueous zinc-ion rechargeable batteries is held back by the degradation of the Zn metal anode with repeated cycling. While raising the operating current density is shown to alleviate this anode degradation, such high cycling rates are not compatible with full cells, as they cause Zn-host cathodes to undergo capacity decay. A simple approach that improves anode performance while using more modest cathode-compatible current densities is required. This work reports reversible planar Zn deposition under cathode-compatible current densities can instead be achieved by applying external pressure to the cell. Employing multiscale characterization, this work illustrates how cycling under pressure results in denser and more uniform Zn deposition, analogous to that achieved under high cycling rates, even at low areal current densities of 1 to 10 mA cm-2. Microstructural mechanical measurements reveal that Zn structures plated under lower current densities are particularly susceptible to pressure-induced compression. The ability to achieve planar Zn plating at cathode-compatible current densities holds significant promise for enabling high-capacity Zn-ion battery full cells.

Effective Solution toward the Issues of Zn-Based Anodes for Advanced Alkaline Ni-Zn Batteries

Alkaline nickel-zinc (Ni-Zn) batteries, as traditional rechargeable aqueous batteries, possess an obvious advantage in terms of energy density, but their development has been hindered by the anode-concerned problems, Zn dendrites, self-corrosion, passivation, deformation, and hydrogen evolution reaction (HER). Herein, to solve these problems, a dual protective strategy is proposed toward the anode using ZnO as an initial active material, including a C coating on ZnO (ZnO@C) and a thin poly(vinyl alcohol) (PVA) layer coating on the electrode (ZnO@C-PVA). In a three-electrode configuration, the reversible capacity can reach 600 mAh g^-1 for the ZnO@C-PVA. Using excessive commercial Ni(OH)₂ as the cathode, the alkaline Ni-Zn cells exhibit good electrochemical performance: Discharge capacity can be as high as 640-650 mAh g^-1 at 4 A g^-1 with a Coulomb efficiency (CE) as high as 97-99% after activity, suggesting low self-corrosion and HER. Capacity retention is 97% after 1200 cycles, indicating rather good durability. The discharge capacity is even slightly increased with the increase of charge/discharge current density (≤8 A g^-1), implying good rate performance. Additionally, the discharge voltage can reach 1.8 V (midpoint value) at various current densities, reflecting the fast reaction kinetics of the anode. Most importantly, no Zn dendrites and passivation are observed after long-term cycling. The strategy proposed here can solve the anode-concerned problems effectively, exhibiting a high application prospect.

Na superionic conductor-type compounds as protective layers for dendrites-free aqueous Zn-ion batteries

Aqueous rechargeable Zn-ion batteries (ARZIBs) have attracted much attention owing to their safety, high energy density and environmental friendliness. However, dendrite formation and corrosive reactions on Zn anode surface limit the development of ARZIBs. Here, Ga3+-doped NaV2(PO4)3 with Na superionic conductor (NASICON) structure [NVP-Ga(x), x = 0, 0.25, 0.5, 0.75] have been exploited as the high-efficiency artificial layer to stabilize Zn anode. The optimal NVP-Ga(0.5) layer can homogenize ion flux and promote uniform deposition of zinc, the dendrite growth and the parasitic reactions can be greatly inhibited. The symmetric cell based on this unique protection layer can stably operate over 1,300 h at 0.5 mA cm-2 with 0.5 mAh cm-2. Benefitting from the high-performance Zn metal anode, the full batteries paired with MnO2 cathode deliver a high discharge capacity of 106 mAh/g with the capacity retention rate of 85 % after 8,000 cycles. This work provides an advanced strategy to stabilize Zn anode for the industrialization of ARZIBs in the near future.