Development of an osteoconductive PCL-PDIPF-hydroxyapatite composite scaffold for bone tissue engineering

Gamma radiation effect on the chemical, mechanical and thermal properties of PCL/MCM-48-PVA nanocomposite films

In this work, poly (vinyl alcohol) (PVA) was employed to produce a Mesoporous Composition of Matter-48 Modified (MCM-48-M or MCM-48-PVA). After surface modification, MCM-48-M was used to produce nanocomposite (NC) films with polycaprolactone (PCL) as a matrix at room temperature. PCL and MCM-48 nanoparticles (NPs) were chosen due to their great biocompatibility and low toxicity. However, MCM-48-M is more compatible with PCL than MCM-48. NC films were sterilized by gamma radiation with a dose of 25 kGy and characterized by experimental techniques to investigate their chemical, mechanical (tensile) and thermal properties. Scanning electron microscopy (SEM) and transmission electronic microscopy (TEM) results indicated that MCM-48-M exhibited a random distribution in the PCL matrix. The PCL chemical structure was preserved in NC films as described by Fourier transform infrared (FT-IR) spectroscopy as well as the tensile and thermal properties of NC films. FT-IR and thermogravimetric analysis (TGA) results showed surface modification. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) showed that crystalline symmetries were preserved and the crystallinity of NC films had small variations in all samples before and after irradiation, respectively. But, our results did not indicate major changes showing that this method is successful for the sterilization of PCL/MCM-48-PVA NC films.

Fabrication and Evaluation of Porous dECM/PCL Scaffolds for Bone Tissue Engineering

Porous scaffolds play a crucial role in bone tissue regeneration and have been extensively investigated in this field. By incorporating a decellularized extracellular matrix (dECM) onto tissue-engineered scaffolds, bone regeneration can be enhanced by replicating the molecular complexity of native bone tissue. However, the exploration of porous scaffolds with anisotropic channels and the effects of dECM on these scaffolds for bone cells and mineral deposition remains limited. To address this gap, we developed a porous polycaprolactone (PCL) scaffold with anisotropic channels and functionalized it with dECM to capture the critical physicochemical properties of native bone tissue, promoting osteoblast cells' proliferation, differentiation, biomineralization, and osteogenesis. Our results demonstrated the successful fabrication of porous dECM/PCL scaffolds with multiple channel sizes for bone regeneration. The incorporation of 100 μm grid-based channels facilitated improved nutrient and oxygen infiltration, while the porous structure created using 30 mg/mL of sodium chloride significantly enhanced the cells' attachment and proliferation. Notably, the mechanical properties of the scaffolds closely resembled those of human bone tissue. Furthermore, compared with pure PCL scaffolds, the presence of dECM on the scaffolds substantially enhanced the proliferation and differentiation of bone marrow stem cells. Moreover, dECM significantly increased mineral deposition on the scaffold. Overall, the dECM/PCL scaffold holds significant potential as an alternative bone graft substitute for repairing bone injuries.

Impact-Resistant Poly(3-Hydroxybutyrate)/Poly(ε-Caprolactone)-Based Materials, through Reactive Melt Processing, for Compression-Molding and 3D-Printing Applications

Biobased and biocompatible polymers, such as polyhydroxyalkanoates (PHAs), are of great interest for a large range of applications in the spirit of green chemistry and upcoming reuse and recycling strategies. Polyhydroxybutyrate (PHB), as a promising biocompatible polymer belonging to PHAs, is subject to increased research concern regarding the high degree of crystallinity and brittle behavior of the resulting materials. Therefore, the improvement of PHB's physico-mechanical properties aims to decrease the Young's modulus values and to increase the ductility of samples. Here, we proposed an ambitious approach to develop melt-processed materials, while combining PHB characteristics with the ductile properties of poly(ε-caprolactone) (PCL). In order to compatibilize the poorly miscible PHB/PCL blends, dicumyl peroxide (DCP) was used as a free-radical promotor of polyester interchain reactions via the reaction extrusion process. The resulting PHB/PCL-DCP materials revealed a slight increase in the elongation at break, and significant improvement in the impact resistance (7.2 kJ.m^-2) as compared to PHB. Additional decrease in the Young's modulus values was achieved by incorporating low molecular polyethylene glycol (PEG) as a plasticizer, leading to an important improvement in the impact resistance (15 kJ.m^-2). Successful 3D printing using fused deposition melting (FDM) of the resulting PHB/PCL-based blends for the design of a prosthetic finger demonstrated the great potential of the proposed approach for the development of next-generation biomaterials.

A Highly Ordered, Nanostructured Fluorinated CaP-Coated Melt Electrowritten Scaffold for Periodontal Tissue Regeneration

Periodontitis is a chronic inflammatory, bacteria-triggered disorder affecting nearly half of American adults. Although some level of tissue regeneration is realized, its low success in complex cases demands superior strategies to amplify regenerative capacity. Herein, highly ordered scaffolds are engineered via Melt ElectroWriting (MEW), and the effects of strand spacing, as well as the presence of a nanostructured fluorinated calcium phosphate (F/CaP) coating on the adhesion/proliferation, and osteogenic differentiation of human-derived periodontal ligament stem cells, are investigated. Upon initial cell-scaffold interaction screening aimed at defining the most suitable design, MEW poly(ε-caprolactone) scaffolds with 500 µm strand spacing are chosen. Following an alkali treatment, scaffolds are immersed in a pre-established solution to allow for coating formation. The presence of a nanostructured F/CaP coating leads to a marked upregulation of osteogenic genes and attenuated bacterial growth. In vivo findings confirm that the F/CaP-coated scaffolds are biocompatible and lead to periodontal regeneration when implanted in a rat mandibular periodontal fenestration defect model. In aggregate, it is considered that this work can contribute to the development of personalized scaffolds capable of enabling tissue-specific differentiation of progenitor cells, and thus guide simultaneous and coordinated regeneration of soft and hard periodontal tissues, while providing antimicrobial protection.

Systemic oxidative stress in old rats is associated with both osteoporosis and cognitive impairment

Aging is associated both with an increase in memory loss and with comorbidities such as Osteoporosis, which could be causatively linked. In the present study, a deleterious effect on bone is demonstrated for the first time in a model of aged rats with impaired memory. We show that bone marrow progenitor cells obtained from rats with memory deficit have a decrease in their osteogenic capacity, and an increase both in their osteoclastogenic profile and adipogenic capacity, when compared to aged rats with preserved memory. Rats with impaired (versus preserved) memory also show alterations in long-bone micro-architecture (decreased trabecular bone and osteocyte density, increased TRAP-positive osteoclasts), lower bone quality (decreased trabecular bone mineral content and density) and an increase in bone marrow adiposity. Interestingly, the development of bone alterations and memory deficit in old rats is associated with significantly higher levels of serum oxidative stress (versus unaffected aged rats). In conclusion, we have found for the first time in an aged rat model, a relationship between alterations in bone quality and memory impairment, with increased systemic oxidative stress as a possible unifying mechanism.

In vitro and in vivo biological performance of hydroxyapatite from fish waste

The aim of this study was to evaluate biocompatibility of hydroxyapatite (HAP) from fish waste using in vitro and in vivo assays. Fish samples (whitemouth croaker - Micropogonias furnieri) from the biowaste was used as HAP source. Pre-osteoblastic MC3T3-E1 cells were used in vitro study. In addition, bone defects were artificially created in rat calvaria and filled with HAP in vivo. The results demonstrated that HAP reduced cytotoxicity in pre-osteoblast cells after 3 and 6 days following HAP exposure. DNA concentration was lower in the HAP group after 6 days. Quantitative RT-PCR did not show any significant differences (p > 0.05) between groups. In vivo study revealed that bone defects filled with HAP pointed out moderate chronic inflammatory cells with slight proliferation of blood vessels after 7 and 15 days. Chronic inflammatory infiltrate was absent after 30 days of HAP exposure. There was also a decrease in the amount of biomaterial, being followed by newly formed bone tissue. All experimental groups also demonstrated strong RUNX-2 immoexpression in the granulation tissue as well as in cells in close contact with biomaterial. The number of osteoblasts inside the defect area was lower in the HAP group when compared to control group after 7 days post-implantation. Similarly, the osteoblast surface as well as the percentage of bone surface was higher in control group when compared with HAP group after 7 days post-implantation. Taken together, HAP from fish waste is a promising possibility that should be explored more carefully by tissue-engineering or biotechnology.

Terpolymer-chitosan membranes as biomaterial

The present study shows a novel copolymer synthesis, its application in the membrane design and the physicochemical and biological characterization of the biomaterial obtained. Terpolymer starting diisopropyl fumarate (F), vinyl benzoate (V) and 2-hydroxyethyl methacrylate (H) was prepared by thermal radical polymerization. This polymer (FVH) was obtained in several monomer ratios and characterized by spectroscopic and chromatographic methods (FTIR, ¹ H-NMR and SEC). The best relationship of F:V:H was 5:4:1, which allows efficient interaction with chitosan through cross-linking with borax to achieve scaffolds for potential biomedical applications. The membranes were obtained by solvent casting and analyzed by scanning electron microscopy (SEM), swelling behavior and mechanical properties. In addition, we studied the possible cytotoxicity and biocompatibility of these materials using a murine macrophage-like cell line (RAW 264.7) and bone marrow mesenchymal progenitor cells (BMPC), respectively, taking into account their intended applications. The results of this study show that the terpolymer obtained and its combination with a natural polymer is a very interesting strategy to obtain a biomaterial with possible applications in regenerative medicine and this could be extended to other structurally related systems.

Nanobiocomposite based on natural polyelectrolytes for bone regeneration

We developed a composite hydrogel based on chitosan and carboxymethyl cellulose with nanometric hydroxyapatite (nHA) as filler (ranging from 0.5 to 5%), by ultrasonic methodology to be used for bone regeneration. The 3D porous-structure of the biocomposite scaffolds were confirmed by Scanning Electron Microscopy and Microtomography analysis. Infrared analysis did not show specific interactions between the organic components of the composite and nHA in the scaffold. The hydrogel properties of the matrices were studied by swelling and mechanical tests, indicating that the scaffold presented a good mechanical behavior. The degradation test demonstrated that the material is slowly degraded, while the addition of nHA slightly influences the degradation of the scaffolds. Biocompatibility studies carried out with bone marrow mesenchymal progenitor cells (BMPC) showed that cell proliferation and alkaline phosphatase activity were increased depending on the matrix nHA content. On the other hand, no cytotoxic effect was observed when RAW264.7 cells were seeded on the scaffolds. Altogether, our results allow us to conclude that these nanobiocomposites are promising candidates to induce bone tissue regeneration.

3D gelatin-chitosan hybrid hydrogels combined with human platelet lysate highly support human mesenchymal stem cell proliferation and osteogenic differentiation

Bone marrow and adipose tissue human mesenchymal stem cells were seeded in highly performing 3D gelatin–chitosan hybrid hydrogels of varying chitosan content in the presence of human platelet lysate and evaluated for their proliferation and osteogenic differentiation. Both bone marrow and adipose tissue human mesenchymal stem cells in gelatin–chitosan hybrid hydrogel 1 (chitosan content 8.1%) or gelatin–chitosan hybrid hydrogel 2 (chitosan 14.9%) showed high levels of viability (80%–90%), and their proliferation and osteogenic differentiation was significantly higher with human platelet lysate compared to fetal bovine serum, particularly in gelatin–chitosan hybrid hydrogel 1. Mineralization was detected early, after 21 days of culture, when human platelet lysate was used in the presence of osteogenic stimuli. Proteomic characterization of human platelet lysate highlighted 59 proteins mainly involved in functions related to cell adhesion, cellular repairing mechanisms, and regulation of cell differentiation. In conclusion, the combination of our gelatin–chitosan hybrid hydrogels with hPL represents a promising strategy for bone regenerative medicine using human mesenchymal stem cells.

Evaluation of Strontium-Containing PCL-PDIPF Scaffolds for Bone Tissue Engineering: In Vitro and In Vivo Studies

Bone tissue engineering (BTE) has the general objective of restoring and improving damaged bone. A very interesting strategy for BTE is to combine an adequate polymeric scaffold with an osteoinductive compound. Strontium is a divalent cation that can substitute calcium in hydroxyapatite and induce both anabolic and anti-catabolic effects in bone. On the other hand, systemic increases in Sr²⁺ levels can provoke adverse cardiovascular effects. In the present study we have developed a compatibilized blend of poly-ε-caprolactone (PCL) and polydiisopropyl fumarate (PDIPF) enriched with 1% or 5% Sr²⁺ and evaluated the applicability of these biomaterials for BTE, both in vitro and in vivo. In vitro, whereas Blend + 5% Sr²⁺ was pro-inflammatory and anti-osteogenic, Blend + 1% Sr²⁺ released very low quantities of the cation; was not cytotoxic for cultured macrophages; and showed improved osteocompatibility when used as a substratum for primary cultures of bone marrow stromal cells. In vivo, implants with Blend + 1% Sr²⁺ significantly increased bone tissue regeneration and improved fibrous bridging (vs. Blend alone), while neither inducing a local inflammatory response nor increased serum levels of Sr²⁺. These results indicate that our compatibilized blend of PCL-PDIPF enriched with 1% Sr²⁺ could be useful for BTE.

Bone Regeneration Using Adipose-Derived Stem Cells in Injectable Thermo-Gelling Hydrogel Scaffold Containing Platelet-Rich Plasma and Biphasic Calcium Phosphate

For bone regeneration, a biocompatible thermo-gelling hydrogel, hyaluronic acid-g-chitosan-g-poly(N-isopropylacrylamide) (HA-CPN) was used as a three-dimensional organic gel matrix for entrapping rabbit adipose-derived stem cells (rASCs). Biphasic calcium phosphate (BCP) ceramic microparticles were embedded within the gel matrix as a mineralized bone matrix, which was further fortified with platelet-rich plasma (PRP) with osteo-inductive properties. In vitro culture of rASCs in HA-CPN and HA-CPN/PRP/BCP was compared for cell proliferation and osteogenic differentiation. Overall, HA-CPN/PRP/BCP was a better injectable cell carrier for osteogenesis of rASCs with increased cell proliferation rate and alkaline phosphatase activity, enhanced calcium deposition and mineralization of extracellular matrix, and up-regulated expression of genetic markers of osteogenesis. By implanting HA-CPN/PRP/BCP/rASCs constructs in rabbit critical size calvarial bone defects, new bone formation at the defect site was successfully demonstrated from computed tomography, and histological and immunohistochemical analysis. Taken together, by combining PRP and BCP as the osteo-inductive and osteo-conductive factor with HA-CPN, we successfully demonstrated the thermo-gelling composite hydrogel scaffold could promote the osteogenesis of rASCs for bone tissue engineering applications.

Advanced glycation end products and strontium ranelate promote osteogenic differentiation of vascular smooth muscle cells in vitro: Preventive role of vitamin D

Advanced glycation end products (AGE) have been demonstrated to induce the osteogenic trans-differentiation of vascular smooth muscle cells (VSMC). Strontium ranelate (SR) is an anti-osteoporotic agent that has both anti-catabolic and anabolic actions on bone tissue. However, in the last years SR has been associated with an increase of cardiovascular risk. We hypothesize that SR can increase the osteoblastic trans-differentiation of VSMC and the induction of extracellular calcifications, an effect that could be potentiated in the presence of AGE and inhibited by simultaneous administration of vitamin D. The present results of our in vitro experiments demonstrate that AGE and SR alone or in combination, stimulate L-type calcium channels, causing an increase in reactive oxygen species and activation of both ERK and NFkB, with the final effect of promoting the osteogenic shift of VSMC. Importantly, these in vitro effects of AGE and/or SR can be prevented by co-incubation with vitamin D.

Inhibition of prostate cancer RM1 cell growth in vitro by hydroxyapatite nanoparticle‑delivered short hairpin RNAs against Stat3

The present study investigated the effect of signal transducer and activator of transcription 3 (Stat3) interference on RM1 prostate cancer cell viability in vitro, using plasmid‑based Stat3 specific short hairpin RNA (sh‑Stat3) delivered by hydroxyapatite nanoparticles (HAP). HAP carrying sh‑Stat3 plasmids were transfected into tumor cells. MTT assays were used to measure RM1 cell viability 24 and 48 h following transfection, and the apoptosis rate and cell cycle phase distribution were determined by flow cytometry. Stat3 mRNA expression levels were measured by reverse transcription‑quantitative polymerase chain reaction and Stat3, Cyclin D1, B cell lymphoma 2 apoptosis regulator (Bcl‑2), vascular endothelial growth factor (VEGF), Bcl‑2 associated X apoptosis regulator (Bax) and cleaved‑caspase‑3 protein expression levels were detected using western blot analysis. The results demonstrated that HAP‑delivered sh‑Stat3 significantly decreased RM1 cell viability through the promotion of cell cycle arrest and apoptosis. Stat3 mRNA and protein expression levels were significantly downregulated in RM1 cells. Bcl‑2, VEGF and Cyclin D1 were also significantly downregulated, but cleaved‑caspase‑3 and Bax mRNA and protein expression levels were significantly upregulated. HAP‑delivered sh‑Stat3 decreased RM1 cell viability in vitro, and HAP assisted plasmid‑based delivery of shRNA into tumor cells. The present results suggest that HAP may be a useful method for successful shRNA delivery into tumors.

Graphene oxide as an interface phase between polyetheretherketone and hydroxyapatite for tissue engineering scaffolds

The poor bonding strength between biopolymer and bioceramic has remained an unsolved issue. In this study, graphene oxide (GO) was introduced as an interface phase to improve the interfacial bonding between polyetheretherketone (PEEK) and hydroxyapatite (HAP) for tissue engineering scaffolds. On the one hand, the conjugated structure of GO could form strong π-π stacking interaction with the benzene rings in PEEK. On the other hand, GO with a negatively charge resulting from oxygen functional groups could adsorb the positively charged calcium atoms (C sites) of HAP. Consequently, the dispersibility and compatibility of HAP in the PEEK matrix increased with increasing GO content up to 1 wt%. At this time, the compressive strength and modulus of scaffolds increased by 79.45% and 42.07%, respectively. Furthermore, the PEEK-HAP with GO (PEEK-HAP/GO) scaffolds possessed the ability to induce formation of bone-like apatite. And they could support cellular adhesion, proliferation as well as osteogenic differentiation. More importantly, in vivo bone defect repair experiments showed that new bone formed throughout the scaffolds at 60 days after implantation. All these results suggested that the PEEK-HAP/GO scaffolds have a promising potential for bone tissue engineering application.

Engineered electrospun poly(caprolactone)/polycaprolactone-g-hydroxyapatite nano-fibrous scaffold promotes human fibroblasts adhesion and proliferation

Polycaprolactone (PCL)/hydroxyapatite nano-composites are among the best candidates for tissue engineering. However, interactions between nHAp and PCL are difficult to control leading to inhomogeneous dispersion of the bio-ceramic particles. Grafting of polymer chains at high density/chain length while promotes the phase compatibility may result in reduced HAp exposed surface area and therefore, bioactivity is compromised. This issue is addressed here by grafting PCL chains onto HAp nano-particles through ring opening polymerization of ε-caprolactone (PCL-g-HAp). FTIR and TGA analysis showed that PCL (6.9wt%), was successfully grafted on the HAp. PCL/PCL-g-HAp nano-fibrous scaffold showed up to 10 and 33% enhancement in tensile strength and modulus, respectively, compared to those of PCL/HAp. The effects of HAp on the in vitro HAp formation were investigated for both the PCL/HAp and PCL/PCL-g-HAp scaffolds. Precipitation of HAp on the nano-composite scaffolds observed after 15days incubation in simulated body fluid (SBF), as confirmed by scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). Human fibroblasts were seeded on PCL, PCL/HAp and PCL/PCL-g-HAp scaffolds. According to MTT assay, the highest cell proliferation was recorded for PCL/PCL-g-HAp nano-composite, at all time intervals (1-21days, P<0.001). Fluorescent microscopy (of DAPI stained samples) and electron microscopy images showed that all nano-fibrous scaffolds (PCL, PCL/HAp, and PCL/PCL-g-HAp), were non-toxic against cells, while more cell adhesion, and the most uniform cell distribution observed on the PCL/PCL-g-HAp. Overall, grafting of relatively short chains of PCL on the surface of HAp nano-particles stimulates fibroblasts adhesion and proliferation on the PCL/PCL-g-HAp nano-composite.

Development of composite scaffolds for load-bearing segmental bone defects

The need for a suitable tissue-engineered scaffold that can be used to heal load-bearing segmental bone defects (SBDs) is both immediate and increasing. During the past 30 years, various ceramic and polymer scaffolds have been investigated for this application. More recently, while composite scaffolds built using a combination of ceramics and polymeric materials are being investigated in a greater number, very few products have progressed from laboratory benchtop studies to preclinical testing in animals. This review is based on an exhaustive literature search of various composite scaffolds designed to serve as bone regenerative therapies. We analyzed the benefits and drawbacks of different composite scaffold manufacturing techniques, the properties of commonly used ceramics and polymers, and the properties of currently investigated synthetic composite grafts. To follow, a comprehensive review of in vivo models used to test composite scaffolds in SBDs is detailed to serve as a guide to design appropriate translational studies and to identify the challenges that need to be overcome in scaffold design for successful translation. This includes selecting the animal type, determining the anatomical location within the animals, choosing the correct study duration, and finally, an overview of scaffold performance assessment.

Fumarate copolymers-based membranes overlooking future transdermal delivery devices: synthesis and properties

Novel copolymers of vinyl acetate and dialkylfumarates, poly(VA-co-DRF) with R = isopropyl (DIPF) or octan-2-yl (DOF), were synthesized by radical copolymerization under microwave conditions. The products were characterized by (1)H NMR and FTIR spectroscopies, size exclusion chromatography and differential scanning calorimetry. Based on these copolymers three membranes supported on polyvinyl alcohol were prepared and their morphology, swelling and mechanical properties were studied. The swelling kinetic was analyzed and interpreted in light of the Fick transport model, showing that the water transport occurs through a non-Fickian diffusion mechanism. The results show that the membrane prepared of poly(VA-co-DOF) exhibited excellent properties as potential platform for transdermal delivery system: they exhibited good tensile strength, moderated swelling and form thin and transparent films.

In vitro and in vivo radiosensitization induced by hydroxyapatite nanoparticles

BACKGROUND

Previous study showed that hydroxyapatite nanoparticles (nano-HAPs) inhibited glioma growth in vitro and in vivo; and in a drug combination, they could reduce adverse reactions. We investigated the possible enhancement of radiosensitivity induced by nano-HAPs.

METHODS

In vitro radiosensitization of nano-HAPs was measured using a clonogenic survival assay in human glioblastoma U251 and breast tumor brain metastatic tumor MDA-MB-231BR cells. DNA damage and repair were measured using γH2AX foci, and mitotic catastrophe was determined by immunostaining. The effect of nano-HAPs on in vivo tumor radiosensitivity was investigated in a subcutaneous and an orthotopic model.

RESULTS

Nano-HAPs enhanced each cell line's radiosensitivity when the exposure was 1 h before irradiation, and they had no significant effect on irradiation-induced apoptosis or on the activation of the G2 cell cycle checkpoint. The number of γH2AX foci per cell was significantly large at 24 h after the combination modality of nano-HAPs + irradiation compared with single treatments. Mitotic catastrophe was also significantly increased at an interval of 72 h in tumor cells receiving the combined modality compared with the individual treatments. In a subcutaneous model, nano-HAPs caused a larger than additive increase in tumor growth delay. In an orthotopic model, nano-HAPs significantly reduced tumor growth and extended the prolongation of survival induced by irradiation.

CONCLUSIONS

These results show that nano-HAPs can enhance the radiosensitivity of tumor cells in vitro and in vivo through the inhibition of DNA repair, resulting in an increase in mitotic catastrophe.

Gelatin nanoparticles loaded poly(ε-caprolactone) nanofibrous semi-synthetic scaffolds for bone tissue engineering

Nanofibrous semi-synthetic polymeric nanocomposite scaffolds were engineered by incorporating a maximum of 15 wt% biopolymeric gelatin nanoparticles (nGs) into the synthetic polymer poly(ε-caprolactone) (PCL) prior to electrospinning. The effect of nGs in altering the physico-chemical properties, cell material interaction and biodegradability of the scaffolds was evaluated. Experimental results showed that the inherent hydrophobicity of PCL scaffolds remained unaltered even after the incorporation of hydrophilic nGs. However, breakdown of the continuous nanofibers into lengths less than 7 µm occurred within four to eight weeks in the presence of nGs in contrast with the greater than two year time frame for the degradation of PCL fibers alone that is known from the literature. In terms of cell-material interaction, human mesenchymal stem cells (hMSCs) were found to attach and spread better and faster on PCL_nG scaffolds compared to PCL scaffolds. However, there was no difference in hMSC proliferation and differentiation into osteogenic lineage between the scaffolds. These results indicate that PCL_nG nanofibrous nanocomposite scaffolds are an improvement over PCL scaffolds for bone tissue engineering applications in that the PCL_nG scaffolds provide improved cell interaction and are able to degrade and resorb more efficiently.

Hydroxyapatite nanoparticles inhibit the growth of human glioma cells in vitro and in vivo

Hydroxyapatite nanoparticles (nano-HAPs) have been reported to exhibit antitumor effects on various human cancers, but the effects of nano-HAPs on human glioma cells remain unclear. The aim of this study was to explore the inhibitory effect of nano-HAPs on the growth of human glioma U251 and SHG44 cells in vitro and in vivo. Nano-HAPs could inhibit the growth of U251 and SHG44 cells in a dose- and time-dependent manner, according to methyl thiazoletetrazolium assay and flow cytometry. Treated with 120 mg/L and 240 mg/L nano-HAPs for 48 hours, typical apoptotic morphological changes were noted under Hoechst staining and transmission electron microscopy. The tumor growth of cells was inhibited after the injection in vivo, and the related side effects significantly decreased in the nano-HAP-and-drug combination group. Because of the function of nano-HAPs, the expression of c-Met, SATB1, Ki-67, and bcl-2 protein decreased, and the expression of SLC22A18 and caspase-3 protein decreased noticeably. The findings indicate that nano-HAPs have an evident inhibitory action and induce apoptosis of human glioma cells in vitro and in vivo. In a drug combination, they can significantly reduce the adverse reaction related to the chemotherapeutic drug 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU).