Comparison of gram positive and gram negative bacterial strains cloned with different types of luciferase genes in bioluminescence cytotoxicity tests

Enhanced sensitivity and responses to viologens from a whole-cell bacterial bioreporter treated with branched polyethyleneimines

AIMS

Evaluate the use of polyethyleneimines (PEIs) as membrane permeabilizers to improve the responses and sensitivity of a bacterial bioreporter strain to viologens.

METHODS AND RESULTS

The responses from E. coli str. EBS, i.e., E. coli BW25113 carrying plasmid pSDS, when exposed to five different viologens were characterized, as were the toxicities of seven different PEIS, including two linear and five branched species. Based on these results, benzyl viologen led to the greatest responses, and 0·8-kDa branched PEI (BPEI) was the least toxic of the PEIs tested and, therefore, both were selected for the subsequent tests. The bioluminescence and relative responses from E. coli str. EBS exposed to various concentrations of 0·8 kDa BPEI identified 400 mg l^-1 as the optimal concentration. Using this concentration, tests were performed with all five of the viologens.

CONCLUSIONS

The responses from E. coli str. EBS to the viologens were improved, with the maximum relative bioluminescence values increasing between 5·6 and 16·5-fold. The minimum detectable levels for four of the viologens were likewise improved 2- to 4-fold.

SIGNIFICANCE AND IMPACT OF STUDY

Improving bacterial membrane permeability in a controlled manner using BPEIs can improve biosensing of toxic compounds, as well as be used in biofuel and bioenergy applications where membrane permeability to a solute is important.

Improving the sensitivity of bacterial bioreporters for heavy metals

Whole-cell bacterial bioreporters represent a convenient testing method for quantifying the bioavailability of contaminants in environmental samples. Despite the fact that several bioreporters have been constructed for measuring heavy metals, their application to environmental samples has remained minimal. The major drawbacks of the available bioreporters include a lack of sensitivity and specificity. Here, we report an improvement in the limit of detection of bacterial bioreporters by interfering with the natural metal homeostasis system of the host bacterium. The limit of detection of a Pseudomonas putida KT2440-based Zn/Cd/Pb-biosensor was improved by a factor of up to 45 by disrupting four main efflux transporters for Zn/Cd/Pb and thereby causing the metals to accumulate in the cell. The specificity of the bioreporter could be modified by changing the sensor element. A Zn-specific bioreporter was achieved by using the promoter of the cadA1 gene from P. putida as a sensor element. The constructed transporter-deficient P. putida reporter strain detected Zn(2+) concentrations about 50 times lower than that possible with other available Zn-bioreporters. The achieved detection limits were significantly below the permitted limit values for Zn and Pb in water and in soil, allowing for reliable detection of heavy metals in the environment.

Antioxidant enzyme activity in bacterial resistance to nicotine toxicity by reactive oxygen species

We analyzed superoxide dismutase (SOD), catalase (CAT), and ATPase activities in the highly nicotine-degrading strain Pseudomonas sp. HF-1 and two standard strains Escherichia coli and Bacillus subtilis in an attempt to understand antioxidant enzymes in bacteria are produced in response to nicotine, which increases the virulence of the bacteria. Nicotine had different effects on different antioxidant enzymes of different bacteria. SOD plays a more important role in resistance to nicotine stress in E. coli than it does in CAT. Multiple antioxidant enzymes are involved in combating oxidative stress caused by nicotine in Pseudomonas sp. HF-1. The contribution of a particular antioxidant enzyme for protection from nicotine stress varies with the growth phase involved. The inhibition of ATPase in Pseudomonas sp. HF-1 at the stationary phase was enhanced with increasing nicotine concentration, showing a striking dose-response relationship. Nicotine probably affected the metabolism of ATP to some extent. Furthermore, different bacteria possessed distinct SOD isoforms to cope with oxidative stress caused by nicotine.

In vivo imaging of bioluminescent Escherichia coli in a cutaneous wound infection model for evaluation of an antibiotic therapy

A rapid, continuous method for noninvasively monitoring the effectiveness of several antibacterial agents in real time by using a model of wound infection was developed. This study was divided into three steps: (i) construction of a plasmid to transform Escherichia coli into a bioluminescent variant, (ii) study of the bioluminescent E. coli in vitro as a function of temperature and pH, and (iii) determination of the MIC and the minimal bactericidal concentration of sulfamethoxazole-trimethoprim (SMX-TMP). Finally, the efficacy of SMX-TMP was monitored in vivo in a cutaneous wound model (hairless rat) infected with this bioluminescent bacterium by using a bioluminescence imaging system. E. coli was transformed by electroporation with a shuttle vector (pRB474) containing the firefly (Photinus pyralis) luciferase gene, resulting in a bioluminescent phenotype. It was found that pH 5.0 was optimal for incorporation of the susbstrate D-luciferin for the luciferase reaction. In vitro, when the agar dilution method, standard turbidity assays, and the bioluminescence imaging system were used, E. coli(pRB474) proved to be susceptible to SMX-TMP. In vivo, at 4 h, SMX-TMP treatment was already efficient compared to no treatment (P = 0.034). At 48 h, no bioluminescence was detected in the wound, demonstrating the susceptibility of E. coli to SMX-TMP. In conclusion, this study points out the advantage of using bioluminescence imaging to evaluate the effects of antibiotics for the treatment of acute infections in vivo in a nondestructive and noninvasive manner.

Construction and Use of Broad Host Range Mercury and Arsenite Sensor Plasmids in the Soil Bacterium Pseudomonas fluorescens OS8

We have generated new sensors for the specific detection and studies of bioavailability of metals by engineering Pseudomonas fluorescens with reporter gene systems. One broad host range mercury (pTPT11) and two arsenite (pTPT21 and pTPT31) sensor plasmids that express metal presence by luminescence phenotype were constructed and transferred into Escherichia coli DH5a and Pseudomonas fluorescens OS8. The maximal induction was reached after 2 h of incubation in metal solutions at room temperature (22 degrees C). In optimized conditions the half maximal velocity of reaction was achieved at acidic pH using a d-luciferin substrate concentration that was nearly sixfold lower for P. fluorescens OS8 than for E. coli DH5a. When using a luciferin concentration (150 mM) that was optimal for E. coli the luminescence declined rapidly in the case of Pseudomonas, for which the substrate level 25 mM gave a stable reading between about 20 min and 3 h. The ability of the strain OS8 to quantitatively detect specific heavy metals in spiked soil and soil extracts is as good, or even better in being a real-time reporter system, than that of a traditional chemical analysis. The Pseudomonas strain used is an isolate from pine rhizosphere in oil and heavy metal contaminated soil. It is also a good humus soil colonizer and is therefore a good candidate for measuring soil heavy metal bioavailability.

Detection of tetracyclines with luminescent bacterial strains

The performance of two bioluminescent Escherichia coli K-12 strains for the specific detection of the tetracycline family of antimicrobial agents was compared, and the analytical applicability of one of the strains was preliminarily evaluated. One sensor plasmid contained the bacterial luciferase operon of Photorhabdus luminescens under the control of the tetracycline-responsive element from transposon Tn10 (15). An analogous plasmid construction with firefly (Photinus pyralis) luciferase reporter gene was constructed, and these two divergent tetracycline-inducible light-emitting systems were compared for their suitability for the qualitative detection of tetracyclines. Both sensor strains behaved in a similar manner kinetically, and the most sensitive tetracycline response for both sensor strains was achieved in 90-120 min by performing the assay at 37 degrees C. The sensor strain containing the bacterial luciferase operon responded slightly more sensitively to different tetracyclines than the strain containing firefly luciferase gene. The sensor bacteria retained their inducibility in lyophilization, and freeze-dried cells detected tetracyclines as sensitively as freshly cultivated sensor cells. The preliminary results from the analysis of tetracycline-spiked pork serum samples indicated that these sensor bacteria could be used to screen veterinary samples for tetracycline residues in real-time.

Generation of bioluminescent Streptococcus mutans and its usage in rapid analysis of the efficacy of antimicrobial compounds

The oral bacterium Streptococcus mutans was transformed by electroporation with a shuttle vector (pCSS945) containing insect luciferase gene from a click beetle (Pyrophorus plagiophthalamus) resulting in a bioluminescent phenotype. This S. mutans strain was used in experiments in which light emission was used as a rapid and, compared to conventional CFU counting, more convenient means of estimating the effects of various antimicrobial treatments. The basic parameters affecting in vivo light production by the strain were studied. It was found that pH 6.0 was optimal for incorporation of the substrate D-luciferin for the luciferase reaction. The optimum concentration of D-luciferin was approximately 150 microM at room temperature. Under optimum conditions the light emission in vivo increased rapidly to a constant level and thereafter had a decay of 0.6%/min when logarithmic-growth-phase cells were used. The light emission closely paralleled the numbers of CFU, giving a detectable signal from 30,000 cells and having a dynamic measurement range over 4 log CFU/relative light unit. The cells were treated with various antimicrobial agents, and the emitted bioluminescence was measured. With the bioluminescent measurements, the results were obtained within hours compared to the days required for agar plates, and also, the kinetics of the antibacterial actions could be followed. Thus, the light emission was found to be a reliable, sensitive, and real-time indicator of the bacteriostatic actions of the antimicrobial agents tested.

A miniaturized Ames mutagenicity assay employing bioluminescent strains of Salmonella typhimurium

Increased awareness of the role of environmental factors in carcinogenesis has led to an emphasis on preventing or minimizing exposure to genotoxicants. This is presently promoting the development of simple, rapid, cost-effective mutagenicity screening assays. We have developed a test system based on the well-known Salmonella mutagenicity assay. The lux genes, which permit cells to emit light through bioluminescence, were introduced into Salmonella typhimurium strain TA98. These bacteria were exposed for 48 h to chemicals or complex mixtures in 48-well microplates containing an appropriate liquid medium. Cells were subsequently centrifuged and resuspended in buffer. The final postexposure revertant biomass was then estimated using a microluminometer. Replication trials confirmed methodological reproducibility. Clear dose-response relationships were obtained with the direct frameshift mutagens 4NQO and 2NF. Mutagenicity threshold effect concentrations found for these compounds were comparable to those reported in the literature. Industrial effluents and environmental extracts (effluents, suspended solids) were also tested and results compared well with those of the SOS Chromotest. While further validation of this new adaptation of the Ames test will be required, it appears at this time that it could be well suited for routine screening of xenobiotics and environmental samples.

Use of controlled luciferase expression to monitor chemicals affecting protein synthesis

In this article, we present a new bioluminescent test system for the screening of chemical compounds with an inhibitory effect on protein synthesis. The test is based on the measurement of real-time in vivo light production by Escherichia coli strains expressing different luciferase genes. The eukaryotic lucGR gene from Pyrophorus plagiophthalamus was found to be the best of three types of luciferase genes tested. Chemicals with known inhibitory effects on protein synthesis were used as test chemicals together with some general toxicants. The incubation of a test chemical with cells was performed either prior to or after the induction of protein synthesis, and the difference in the results of the two methods distinguishes the possible influence on protein synthesis from direct metabolic inhibition. Using lyophilized bacteria, the test is performed in less than an hour without any bacterial cultivation, which makes the test suitable for rapid and sensitive screening of chemicals or environmental samples. Compared with the standardized 50% inhibitory concentration calculation method of the bioluminescent cytotoxicity test, the more direct approach of calculation developed in this study proved to be more convenient than and as reliable as the standard method.