Hazardous waste treatment technologies

Efficient removal of environmental pollutants by green synthesized metal nanoparticles of Clitoriaternatea

Prevention and management of water pollution are becoming a great challenge in the present scenario. Different conventional methods like carbon adsorption, ion exchange, chemical precipitation, evaporation, and biological treatments remove water pollutants. Nowadays, the requirement for effective, non-toxic and safe waste management strategies is very high. Nanomaterials have been explored in various fields due to their unique characteristics. Green synthesis of nanomaterial is becoming more popular due to their safety, non-toxicity, and ease of scale-up technology. Metal nanoparticles can be synthesized using a green synthesis method using biological sources provided by eco-friendly, non-hazardous nanomaterials with superior properties to bulk metals. Hence, this study has designed a green synthesis of magnetic (cobalt oxide) and noble (gold) nanoparticles from the fresh flowers of Clitoria ternatea. The flavonoids and polyphenols in the extract decreased the energy band gap of cobalt oxide and gold nanoparticles; hence, the capping of the natural constituents in Clitoria ternatea helped form stable metal nanoparticles. The cobalt oxide and gold nanoparticles are evaluated for their potential for eliminating organic pollutants from industrial effluent. The novelty of this present work represents the application of cobalt oxide nanoparticles in the removal of organic pollutants and a comparative study of the catalytic behaviour of both metal nanoparticles. The degradation of bromophenol blue, bromocresol green, and 4-nitrophenol in the presence of gold nanoparticles was completed in 120, 45, and 20 min with rate constants of 3.7 × 10-3/min, 6.9 × 10-3/min, and 16.5 × 10-3/min, respectively. Similarly, the photocatalysis of bromophenol blue, bromocresol green, and 4-nitrophenol in the presence of cobalt oxide nanoparticles was achieved in 60, 90, and 40 min with rate constants of 2.3 × 10-3/min, 1.8 × 10-3/min, and 1.7 × 10-3/min, respectively. The coefficient of correlation (R2) values justify that the degradation of organic pollutants follows first-order kinetics. The significance of the study is to develop green nanomaterials that can be used efficiently to remove organic pollutants in wastewater using a cost-effective method with minimal toxicity to aquatic animals. It has proved to be useful in environmental pollution management.

A critical review on sustainable hazardous waste management strategies: a step towards a circular economy

Globally, industrialisation and urbanisation have led to the generation of hazardous waste (HW). Sustainable hazardous waste management (HWM) is the need of the hour for a safe, clean, and eco-friendly environment and public health. The prominent waste management strategies should be aligned with circular economic models considering the economy, environment, and efficiency. This review critically discusses HW generation and sustainable management with the strategies of prevention, reduction, recycling, waste-to-energy, advanced treatment technology, and proper disposal. In this regard, the major HW policies, legislations, and international conventions related to HWM are summarised. The global generation and composition of hazardous industrial, household, and e-waste are analysed, along with their environmental and health impacts. The paper critically discusses recently adapted management strategies, waste-to-energy conversion techniques, treatment technologies, and their suitability, advantages, and limitations. A roadmap for future research focused on the components of the circular economy model is proposed, and the waste management challenges are discussed. This review stems to give a holistic and broader picture of global waste generation (from many sources), its effects on public health and the environment, and the need for a sustainable HWM approach towards the circular economy. The in-depth analysis presented in this work will help build cost-effective and eco-sustainable HWM projects.

Photocatalysis of environmental organic pollutants and antioxidant activity of flavonoid conjugated gold nanoparticles

The unique properties of nanomaterials have the potential application in different fields of biomedical application along with the management of environmental pollutants. This research work involved the isolation of hesperidin from the orange peel and the preparation of hesperidin gold nanoparticles by the chemical reduction method. The high substrate specificity and lower band gap enable the excitation of gold nanoparticles in visible light. Hence gold nanoparticles are chosen nowadays for the management and removal of organic pollutants. The efficacy of hesperidin gold nanoparticles was evaluated by the photocatalytic activity on organic dyes and pollutants like methyl orange, methylene blue, bromocresol green, and 4 - nitro phenol with sodium borohydride as reducing agent and the antioxidant study by scavenging of free radicals of DPPH, ABTS, and hydroxyl free radicals of hydrogen peroxide. The kinetics of photocatalytic degradation of organic dyes and 4 - nitro phenol was found to follow the first order with rate constants of 10 × 10^-3, 37 × 10^-3, 23 × 10^-3 and 49 × 10^-3 min^-1 for methyl orange, methylene blue, bromocresol green and 4 - nitro phenol respectively. The hesperidin gold nanoparticles showed significant antioxidant activity as compared to ascorbic acid as standard. The flavonoid conjugated gold nanoparticles can be an efficient antioxidant and photocatalyst for the management of different diseases and wastewater treatment respectively.

Patent analysis of chemical treatment technology for wastewater: Status and future trends

In order to reveal the status and trends of chemical treatment for wastewater, the patents analysis from both structured and unstructured data was performed in this study. 35,838 patents recorded in the Derwent Innovation Index database were adopted. The results showed that China was the country with the largest number of patents in the field, and the United States was the main exporter of international technology flows. Chemical processes combined with biological and physical processes was the mainstream, and ozonation and electrochemical treatment were the major single technologies. Technology evolution path generally showed the transition from biological process-combined chemical treatment to electrochemical treatment and finally to physical process-combined chemical treatment. Furthermore, future trends were revealed from both patents and papers. It demonstrated that efficient removal of ammonia nitrogen, green water treatment agents and resourcezation of wastewater were the key innovation directions, and technologies with regard to efficient use of energy (including photocatalytic technology and microbial fuel cell) were the main research hotspots. Overall, this study provided a comprehensive understanding for the research and application of chemical treatment for wastewater technologies.

Identification of source information for sudden hazardous chemical leakage accidents in surface water on the basis of particle swarm optimisation, differential evolution and Metropolis-Hastings sampling

A quick and accurate identification of source information on sudden hazardous chemical leakage accident is crucial for early accident warning and emergency response. This study firstly regards source identification problem of sudden hazardous chemical leakage accidents as an inverse problem and presents a source identification model based on the Bayesian framework. Secondly, a new identification method is designed on the basis of particle swarm optimisation (PSO), differential evolution (DE) and the Metropolis-Hastings (M-H) sampling method. Lastly, the designed method, i.e. PSO-DE-MH, is verified by an outdoor experiment analyses in a section of the South-North Water Transfer Project. Results show that the number of iterations, the average absolute error, the average relative error and the average standard deviations of the identification results obtained by PSO-DE-MH are less than those of PSO-DE and DE-MH. Moreover, the relative error and the sampling relative error of the identification results under five different measurement errors (MEs) (σ = 0.01, 0.05, 0.1, 0.15, 0.2) are less than 9.5% and 0.2%, respectively. The designed method is effective even when the standard deviation of the ME increases to 0.2. Therefore, the designed method can effectively and accurately obtain the source information of sudden hazardous chemical leakage accidents. This study provides a new idea and method to solve the difficult problems of emergency management.

Kinetic and Thermodynamic Characteristics of Fluoride Ions Adsorption from Solution onto the Aluminum Oxide Nanolayer of a Bacterial Cellulose-Based Composite Material

The described research examined the adsorption of fluoride ions from solution immobilized onto an aluminum oxide-coated bacterial cellulose-based composite material in which aluminum oxide had been deposited using ALD technology. The kinetic regularities of the adsorption of fluoride ions from the solution as well as the mechanism of the processes were analyzed. The established equations show that the dynamics of adsorption correspond to first-order kinetics. Based on the Langmuir adsorption isotherms, we defined the adsorption equilibrium constants, parameter maximum adsorption, and change in Gibbs free energy. It is shown that, with increasing temperature, an increase in the reaction rate is constant, both forward and reverse. This testifies to the activated character of adsorption of the first fluoride on the surface of the sorbent based on bacterial cellulose modified with an alumina nanolayer. The activation energy of the desorption process is higher than the activation energy of the adsorption process, which characterizes the adsorption as ionic. The negative value of entropy indicates that in the course of sorption, an adsorption complex "aluminum-fluorine" is formed, where the system is more ordered than the initial system in which fluorine ions are in solution. The limiting stages of the process are revealed. The high sorption capacity of the resulting bacterial cellulose-based composite material obtained by means of biosynthesis through cultivation of the bacterium Komagataeibacter sucrofermentans B-11267 was demonstrated.

Microwave-Assisted Synthesis of Chalcopyrite/Silver Phosphate Composites with Enhanced Degradation of Rhodamine B under Photo-Fenton Process

A new composite by coupling chalcopyrite (CuFeS₂) with silver phosphate (Ag₃PO₄) (CuFeS₂/Ag₃PO₄) was proposed by using a cyclic microwave heating method. The prepared composites were characterized by scanning and transmission electron microscopy and X-ray diffraction, Fourier-transform infrared, UV–Vis diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. Under optimum conditions and 2.5 W irradiation (wavelength length > 420 nm, power density = 0.38 Wcm⁻²), 96% of rhodamine B (RhB) was degraded by CuFeS₂/Ag₃PO₄ within a 1 min photo-Fenton reaction, better than the performance of Ag₃PO₄ (25% degradation within 10 min), CuFeS₂ (87.7% degradation within 1 min), and mechanically mixed CuFeS₂/Ag₃PO₄ catalyst. RhB degradation mainly depended on the amount of hydroxyl radicals generated from the Fenton reaction. The degradation mechanism of CuFeS₂/Ag₃PO₄ from the photo-Fenton reaction was deduced using a free radical trapping experiment, the chemical reaction of coumarin, and photocurrent and luminescence response. The incorporation of CuFeS₂ in Ag₃PO₄ enhanced the charge separation of Ag₃PO₄ and reduced Ag₃PO₄ photocorrosion as the photogenerated electrons on Ag₃PO₄ were transferred to regenerate Cu²⁺/Fe³⁺ ions produced from the Fenton reaction to Cu⁺/Fe²⁺ ions, thus simultaneously maintaining the CuFeS₂ intact. This demonstrates the synergistic effect on material stability. However, hydroxyl radicals were produced by both the photogenerated holes of Ag₃PO₄ and the Fenton reaction of CuFeS₂ as another synergistic effect in catalysis. Notably, the degradation performance and the reusability of CuFeS₂/Ag₃PO₄ were promoted. The practical applications of this new material were demonstrated from the effective performance of CuFeS₂/Ag₃PO₄ composites in degrading various dyestuffs (90–98.9% degradation within 10 min) and dyes in environmental water samples (tap water, river water, pond water, seawater, treated wastewater) through enhanced the Fenton reaction under sunlight irradiation.

Modeling the Mineralization Kinetics of Visible Led Graphene Oxide/Titania Photocatalytic Ozonation of an Urban Wastewater Containing Pharmaceutical Compounds

In a water ozonation process, dissolved organics undergo two reactions at least: direct ozone attack and oxidation with hydroxyl radicals generated from the ozone decomposition. In the particular case of urban wastewater contaminated with pharmaceuticals, competition between these two reactions can be studied through application of gas–liquid reaction kinetics. However, there is a lack in literature about kinetic modeling of ozone processes in water specially in photocatalytic ozonation. In this work, lumped reactions of ozone and hydroxyl radicals with total organic carbon have been proposed. Urban wastewater containing a mixture of eight pharmaceutical compounds has been used to establish the kinetic model that simulates the mineralization process. The kinetic model is based on a mechanism of free radical and molecular reactions and the knowledge of mass transfer, chemical reaction rate constants, and radiation transfer data. According to the model, both single ozonation and photocatalytic ozonation present two distinct reaction periods characterized by the absence and presence of dissolved ozone. In the first period (less than 10 min), pharmaceuticals mainly disappear by direct ozone reactions and TOC variation due to these compounds has been modeled according to gas–liquid reaction kinetics through a lumped ozone-pharmaceutical TOC fast second order reaction. The corresponding rate constant of this reaction was found to change with time from 3 × 105 to 200 M−1 s−1 with Hatta values higher than 0.3. In the second period (nearly 5 h), competition between direct and hydroxyl radical reactions takes place and a kinetic model based on a direct and free radical reaction mechanism is proposed. Main influencing parameters to be known were: Direct ozone reaction rate constant, catalyst quantum yield, and hydroxyl radical scavengers. The first two take values of 0.5 M−1 s−1 and 5 × 10−4 mol·photon−1, respectively, while a fraction of TOC between 10% and 90% that changes with time was found to possess hydroxyl radical scavenger nature.

Adsorption of Organic Pollutants from Cold Meat Industry Wastewater by Electrochemical Coagulation: Application of Artificial Neural Networks

The cold meat industry is considered to be one of the main sources of organic pollutants in the wastewater of the meat sector due to the complex mixture of protein, fats, and dyes present. This study describes electrochemical coagulation (EC) treatment for the adsorption of organic pollutants reported in cold meat industry wastewater, and an artificial neural network (ANN) was employed to model the adsorption of chemical oxygen demand (COD). To depict the adsorption process, the parameters analyzed were current density (2–6 mA cm−2), initial pH (5–9), temperature (288–308 K), and EC time (0–180 min). The experimental results were fit to the Langmuir and Freundlich isotherm equations, while the modeling of the adsorption kinetics was evaluated by means of pseudo-first and pseudo-second-order rate laws. The data reveal that current density is the main control parameter in EC treatment, and 60 min are required for an effective adsorption process. The maximum removal of COD was 2875 mg L−1 (82%) when the following conditions were employed: pH = 7, current density = 6 mA cm−2, and temperature of 298 K. Experimental results obey second-order kinetics with values of the constant in the range of 1.176 × 10−5 ≤ k2 (mg COD adsorbed/g-Al.min) ≤ 1.284 × 10−5. The ANN applied in this research established that better COD removal, 3262.70 mg L−1 (93.22%) with R2 = 0.98, was found using the following conditions: EC time of 30.22 min, initial pH = 7.80, and current density = 6 mA cm−2. The maximum adsorption capacity of 621.11 mg g−1 indicates a notable affinity between the organic pollutants and coagulant metallic ions.

Using sodium D-gluconate to suppress hydrogen production in wet aluminium waste dust collection systems

The reaction of aluminium dust and water generated in the production of aluminium products generates hydrogen, which poses a risk to wet collection systems for hydrogen explosions. In this paper, non-toxic and environmentally friendly sodium D-gluconate is used to suppress the hydrogen production reaction of aluminium waste dust and water. The results of the hydrogen evolution curves and chemical kinetics of 7 different concentrations of sodium D-gluconate showed that when the sodium D-gluconate concentration reached 0.25 g L^-1, there was almost no hydrogen generation, and the rate constant was almost zero. The scanning electron microscopy (SEM) results showed that the surface of the reaction product became smoother with increasing solution concentration. The energy dispersive spectroscopy (EDS) results showed that increasing the solution concentration slowed the formation of aluminium oxide in the product, confirming the effectiveness of sodium D-gluconate in inhibiting the reaction of aluminium waste dust particles with water. The Fourier transform infrared (FTIR) results showed that sodium D-gluconate formed a chemical adsorption film on the surface of aluminium waste dust particles to prevent the dust from contacting water, thus suppressing hydrogen production. This method provides a new approach to design safe wet collection systems by suppressing hydrogen production.