Highly efficient nanostructured CoFe2 O4 thin film electrodes for electrochemical degradation of rhodamine B

Gemini Quaternary Ammonium Surfactants with Different Counterions-modified Montmorillonite for Efficient Removal of Methyl Orange

Organic Na-montmorillonite (OMt-12-2-12·2Y - , Y=CH 3 CO 3 - , C 6 H 5 COO - and Br - ) modified by a series of Gemini quaternary ammonium surfactants with different counterions was prepared for enhancing the adsorption capacity of methyl orange. Compared with the initial adsorption capacity of 5.251 mg/g of Na-Mt, the adsorption effect of OMts under the optimal conditions increased by about 31~34 times. The adsorption isotherms and kinetics of all adsorption processes were respectively described by Langmuir and pseudo-second-order models. The structure, hydrophobicity and hydration of the counterions, as well as the affinity of the counterions with the long aliphatic chains, had a certain influence on the adsorption performance of OMts for methyl orange.

Rapid removal of high-concentration Rhodamine B by peroxymonosulfate activated with Co3O4-Fe3O4 composite loaded on rice straw biochar

In this study, rice straw biochar modified with Co₃O₄-Fe₃O₄ (RSBC@Co₃O₄-Fe₃O₄) was successfully prepared via calcinating oxalate coprecipitation precursor and employed as a catalyst to activate peroxymonosulfate (PMS) for the treatment of Rhodamine B (RhB)-simulated wastewater. The results indicated that RSBC@Co₃O₄-Fe₃O₄ exhibited high catalytic performance due to the synergy between Co₃O₄ and Fe₃O₄ doping into RSBC. Approximately 98% of RhB (180 mg/L) was degraded in the RSBC@Co₃O₄-Fe₃O₄/PMS system at initial pH 7 within 15 min. The degradation efficiency of RhB maintained over 90% after the fourth cycle, illustrating that RSBC@Co₃O₄-Fe₃O₄ displayed excellent stability and reusability. The primary reactive oxygen species (ROS) answerable for the degradation of RhB were ¹O₂, •OH, and SO₄^•-. Moreover, the intermediates involved in the degradation of RhB were identified and the possible degradation pathways were deduced. This work can provide a new approach to explore Co-based and BC-based catalysts for the degradation of organic pollutants.

Fabrication of nano-biocomposite for the removal of Eriochrome Black T and malachite green from aqueous solution: isotherm and kinetic studies

The increasing generation of toxic dye wastewater from various enterprises continues to be a serious public health issue and happens to be of environmental concern, posing a significant challenge to existing conventional water treatment facilities. Malachite green (MG) and Eriochrome Black T (EBT) are extremely hazardous and carcinogenic substances; hence it is crucial to remove them from water bodies. A well-known cleaner, more economical, and environmentally friendly treatment method is adsorption. The kind of adsorbent material employed determines how well the treatment procedure works. A physiologically compatible nanocomposite adsorbent (HAP@CT@MNP) was fabricated from laboratory synthesized hydroxyapatite (HAP) and magnetite (MNP) for its application in the wastewater remediation process. The ability of the fabricated nanocomposite to remove the harmful dyes EBT and MG from a simulated wastewater was evaluated. The impact of operational parameters including pH, adsorbate concentration, adsorbent dose, contact time, and temperature was examined to gauge the maximum adsorption capacity of the developed nanocomposite. The optimum pH for the eradication of EBT and MG were found to be 3 and 7.4, respectively. The maximum capacity evaluated was 222 mg/g and 500 mg/g at room temperature and at contact time of 50 and 40 min respectively. The binding of either EBT or MG followed the monolayer Langmuir model and kinetic studies revealed the suitability of pseudo-second-order model. Studies using spectroscopy and isotherm modeling showed that the main mechanism controlling the adsorption of EBT and MG onto HAP@CT@MNP is physisorption. The efficacy of the adsorbent to be reused with 8% loss in its efficiency reveals the economic viability of HAP@CT@MNP. The current work showed that a biocompatible nanocomposite could be successfully fabricated and used as an enhanced adsorbent for the quick and effective removal of the toxic dyes EBT and MG from wastewater.

Green antimicrobial adsorbent containing grafted xanthan gum/SiO2 nanocomposites for malachite green dye

Recently, removal of synthetic dyes, especially cationic dye of malachite green (MG), and inhibition of the growth of pathogenic microorganism from drinking water have gained much interest due to their high toxic potency for aquatic biosystems. Herein, a new dye adsorbent with outstanding antibacterial activity was fabricated based on xanthan gum (XG) and SiO₂ nanoparticles through ultrasonication followed by the crosslinking polymerization with vinyl imidazole monomer. The nano adsorbents were characterized with various techniques such as FTIR, XRD, SEM, EDX, and TEM. The nanocomposites were applied as a filter for discarding MG dye and killing the growth of bacterial strains such as E.coli and S.aureus which are considered as the common impurities for drinking water. The data revealed that a maximum adsorption capacity was recorded as 99.5% (Q_max = 588.2 mg/g) at optimum conditions including 10 mg nanocomposite, 10 mL of MG dye (450 ppm), pH = 7, the temperature of 30 °C, and the adsorption time was adjusted within 6 h. The process of dye adsorption was applied to the common isotherm models of Langmuir, Temkin, and Freundlich, and the findings showed that the adsorption behavior was well fitted with the Langmuir one (R² = 0.9983). Moreover, different adsorption kinetic models such as pseudo-first order, pseudo-second order, and intra-particle diffusion were studied for understanding the mechanism of MG adsorption onto nanocomposite surface. It was found that both intraparticle diffusion and pseudo-first-order have participated evenly in the adsorption mechanism of MG dye. Ultimately, the as-prepared nanocomposites were tested against the growth of S. aureus, and E.coli manifesting a superior inhibition diameter as 23.5 ± 0.50, and 25.33 ± 0.47 mm against E.coli, and S. aureus, respectively. Therefore, our new XG-g-PVI/SiO₂ adsorbent is a very promising adsorbent for the fast and efficient capture of dyes from aqueous solutions.

Earth abundant transition metal ferrite nanoparticles anchored ZnO nanorods as efficient and stable photoanodes for solar water splitting

Poor light absorption, severe surface charge recombination and fast degradation are the key challenges with ZnO nanostructures based electrodes for photoelectrochemical (PEC) water splitting. Here, this study attempts to design an efficient and durable nano-heterojunction photoelectrode by integrating earth abundant chemically stable transition metal spinel ferrites MFe₂O₄ (M = Co and Ni) nano-particles on ZnO Nanorod arrays. The low band gap magnetic ferrites improve the solar energy harvesting ability of the nano-heterojunction electrodes in ultraviolet-visible light region resulting in a maximum increase of 105% and 190% in photocurrent density and applied bias photon-to-current efficiency, respectively, compared to pristine ZnO nanorods. The favourable type-II band alignment at the ferrites/ZnO nano-heterojunction provides significantly enhanced photo-generated carrier separation and transfer, endowing the excellent solar H₂ evolution ability (743 and 891 μmol cm^-2 h^-1for ZnO/CoFe₂O₄ and ZnO/NiFe₂O₄, respectively) of the photoanodes by using sacrificial agent. The hybrid nanostructures deliver long term stability of the electrode against photocorrosion. This work demonstrates an easy but effective strategy to develop low-cost earth abundant ferrites-based heterojunction electrodes, which offers excellent PEC activity and stability.