Green production of hydrochar nut group from waste materials in subcritical water medium and investigation of their adsorption performance for crystal violet

Effect of wood and peanut shell hydrochars on the desiccation cracking characteristics of clayey soils

Soil cracking can significantly alter the water and nutrient migration pathways in the soil, influencing plant growth and development. While biochar usage has effectively addressed soil cracking, the feasibility of using less energy-intensive hydrochars in desiccating soils remains unexplored. This study investigates the impact of wood and peanut shell hydrochars on the desiccation cracking characteristics of clayey soil. A series of controlled environmental laboratory incubations with regular imaging was conducted to determine crack development's dynamic in unamended and hydrochar-amended soils. The results reveal that the addition of wood hydrochar at 2% and 4% dosage reduced the crack intensity factor (CIF) by 22% and 43%, respectively, compared to the unamended control soil. Similarly, the inclusion of peanut shell hydrochar at 2% and 4% lowered the CIF by 22% and 51%, respectively. The presence of hydrophilic groups on the surface of hydrochars, such as O-H, CH, and C-O-C, enhanced the water retention capacity, as confirmed by Fourier-transform infrared analysis. The CIF decrease is attributed to mitigated water evaporation rates, enabled by enhanced water retention within the hydrochar pore spaces. These findings are supported by scanning electron microscopy analyses of the hydrochar morphology. Despite CIF reduction with hydrochar incorporation, the crack length density (CLD) increased across all hydrochar-amended series. In contrast to unamended soil which exhibited pronounced widening of large cracks and extensive inter-pore voids, the incorporation of hydrochar resulted in higher CLD due to the formation of finer interconnecting crack meshes. Consequently, the unamended control soil suffered greater water loss due to heightened evaporation rates. This study sheds new light on the potential of hydrochars in addressing desiccation-induced soil cracking and its implications for water conservation.

Effective adsorption of crystal violet onto aromatic polyimides: Kinetics and isotherm studies

The motive of this work is to synthesis aromatic polyimides by a two-step poly condensation process and the prepared aromatic polyamides (APIs) is been used as an effective functionalized adsorbent for the removal of carcinogenic crystal violet (CV) from aqueous medium. The adsorption efficiency of the APIs was enhanced by incorporation different functional moieties (varying aromatic dianhydrides with -O-, -(CF₃)₂-, -(CH₃)₂-) in the polymer structure. The initial and final concentration of CV was measured using UV-Vis spectrometer. The adsorption process was optimized by varying the parameters such as the effect of solution pH, contact time, initial dye concentration, and adsorbent dosage. Kinetics and isotherms of the adsorption system were appraised using data obtained from effect of contact time and initial dye concentration with corresponding empirical modelling techniques respectively. The evaluated results of the adsorption kinetic studies confirmed that the adsorption of API onto CV is followed a pseudo-second-order kinetic model. The adsorption behaviour and their interactions between APIs and CV are well established. The experimental results of this research output could be confirmed that APIs is a very effective adsorbent for the removal of cationic dye from aqueous.

Walnut Shell Biowaste Valorization via HTC Process for the Removal of Some Emerging Pharmaceutical Pollutants from Aqueous Solutions

This research emphasizes the performance of some eco-friendly carbon materials as hydrochars (HC) obtained by the hydrothermal carbonization (HTC) process applied to walnut shell (WS) biowaste. These materials display promising properties that can be used for environmental applications such as emerging pharmaceutical pollutant retention from water sources. Thus, three hydrochars coded HCWS1, HCWS2, and HCWS3 were obtained using a dynamic autoclave in specific conditions—temperature of 220 °C, autogenous pressure, 1:10 biomass–water weight ratio—and for three different reaction times, 1 h, 6 h, and 12 h. The HCWSs were characterized by means of ATR-FTIR and SEM-EDS analyses and tested as possible adsorbents to assess the removal efficiencies of some emerging pharmaceutical pollutants (paracetamol and methylene blue) by UV–VIS spectrophotometry. Kinetic and adsorption studies were carried out. The best results were obtained for the HCWS3 hydrochar. Further perspectives include an activation step of the hydrochars and their testing on other emerging pharmaceutical pollutants.

Leonardite powder as an efficient adsorbent for cationic and anionic dyes

This paper aims to investigate the uses of leonardite powder (LP) as an effective adsorbent for the removal of basic red 18 (BR18) and reactive red 180 (RR180) dyes. LP was characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Zeta potential, Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared spectroscopy (FTIR), and X-ray fluorescence (XRF). The adsorption process was assessed based on pH, size and the amount of the adsorbent, BR18 and RR180 concentration, and the contact time. BR18 dye was completely adsorbed onto the LP (the removal efficiency equals 100%) after 45 min at the optimum condition (original pH [6.5], the particle size of 45 μm, the adsorbent dose of 0.25 g/L, and the initial concentration of 10 mg/L). For RR180, the maximum removal efficiency (74%) was obtained when 1 g/L LP with 45 um size was added to an RR180 solution of 10 mg/L concentration. Temkin isotherm was used to explain the adsorption of BR18. In contrast, RR180 adsorption was described by the Freundlich model. The adsorptions of both dyes followed the pseudo-second-order kinetics. The reusability of the LP was assessed. For BR18, the efficiency decreased to 96% in the second cycle and reached 42% in the fifth cycle. In RR180, LP was not able to be reused efficiently. As a result, the LP ability for BR18 removal is higher than the RR180 in terms of uptake and reusability. PRACTITIONER POINTS: BR18 and RR180 dyes elimination was carried out with leonardite powder (LP). The maximum removal efficiencies for BR18 and RR180 were 100% and 74%, respectively. The LP ability for BR18 removal is higher than the RR180 in terms of uptake and reusability.