Life-cycle assessment of full-scale membrane bioreactor and tertiary treatment technologies in the fruit processing industry

Life cycle assessment for the land application of food processing wash-water and solid residuals

A life cycle assessment (LCA) study was completed to understand the environmental impacts associated with the land application of wastes produced from rural food-processing operations for final disposal. The system boundaries for the two comprised scenarios included the storage of the produced non-agriculture source material (NASM), transportation to an applicable location, land application of the NASM, and the impacts of the final emissions to the soil and groundwater for a full year. The Tool for the Reduction and Assessment of Chemicals and Other Environmental Impacts (TRACI) v2.1 was selected as the impact assessment method. Furthermore, SimaPro 8.0.4.26 was the LCA model version that was used with all the databases included. Overall, the LCA study showed that the most significant environmental impacts associated with the disposal process resulted from carcinogenic and eutrophication emissions. The component that contributed the most to carcinogenic impacts was found to be from the material required to create the concrete storage tank. Additionally, eutrophication was identified to be a potential significant impact, if proper setback requirements are not followed for the NASM material. Results of the study look to inform stakeholders about the benefits and risks encountered from NASM disposal. PRACTITIONER POINTS: Life cycle assessment was completed on a representative NASM disposal system using land application. Concrete tank used for storage of NASM had the most significant impact in carcinogenic emissions. Eutrophication impacts were the second most significant impact behind carcinogenic emissions.

Modeling and Life Cycle Assessment of a Membrane Bioreactor–Membrane Distillation Wastewater Treatment System for Potable Reuse

Wastewater treatment for indirect potable reuse (IPR) is a possible approach to address water scarcity. In this study, a novel membrane bioreactor–membrane distillation (MBR-MD) system was evaluated to determine the environmental impacts of treatment compared to an existing IPR facility (“Baseline”). Physical and empirical models were used to obtain operational data for both systems and inform a life cycle inventory. Life cycle assessment (LCA) was used to compare the environmental impacts of each system. Results showed an average 53.7% reduction in environmental impacts for the MBR-MD system when waste heat is used to operate MD; however, without waste heat, the environmental impacts of MBR-MD are significantly higher, with average impacts ranging from 218% to 1400% greater than the Baseline, depending on the proportion of waste heat used. The results of this study demonstrate the effectiveness of the novel MBR-MD system for IPR and the reduced environmental impacts when waste heat is available to power MD.