Functionalised Silver Chalcogenide Clusters

Anion-templated silver nanoclusters: precise synthesis and geometric structure

Metal nanoclusters (NCs) are gaining much attention in nanoscale materials research because they exhibit size-specific physicochemical properties that are not observed in the corresponding bulk metals. Among them, silver (Ag) NCs can be precisely synthesized not only as pure Ag NCs but also as anion-templated Ag NCs. For anion-templated Ag NCs, we can expect the following capabilities: 1) size and shape control by regulating the central anion (anion template); 2) stabilization by adjusting the charge interaction between the central anion and surrounding Ag atoms; and 3) functionalization by selecting the type of central anion. In this review, we summarize the synthesis methods and influences of the central anion on the geometric structure of anion-templated Ag NCs, which include halide ions, chalcogenide ions, oxoanions, polyoxometalate, or hydride/deuteride as the central anion. This summary provides a reference for the current state of anion-templated Ag NCs, which may promote the development of anion-templated Ag NCs with novel geometric structures and physicochemical properties.

A New Synthetic Methodology in the Preparation of Bimetallic Chalcogenide Clusters via Cluster-to-Cluster Transformations

A decanuclear silver chalcogenide cluster, [Ag₁₀(Se){Se₂P(OⁱPr)₂}₈] (2) was isolated from a hydride-encapsulated silver diisopropyl diselenophosphates, [Ag₇(H){Se₂P(OⁱPr)₂}₆], under thermal condition. The time-dependent NMR spectroscopy showed that 2 was generated at the first three hours and the hydrido silver cluster was completely consumed after thirty-six hours. This method illustrated as cluster-to-cluster transformations can be applied to prepare selenide-centered decanuclear bimetallic clusters, [Cu_xAg_10-x(Se){Se₂P(OⁱPr)₂}₈] (x = 0-7, 3), via heating [Cu_xAg_7-x(H){Se₂P(OⁱPr)₂}₆] (x = 1-6) at 60 °C. Compositions of 3 were accurately confirmed by the ESI mass spectrometry. While the crystal 2 revealed two un-identical [Ag₁₀(Se){Se₂P(OⁱPr)₂}₈] structures in the asymmetric unit, a co-crystal of [Cu₃Ag₇(Se){Se₂P(OⁱPr)₂}₈]_0.6[Cu₄Ag₆(Se){Se₂P(OⁱPr)₂}₈]_0.4 ([3a]_0.6[3b]_0.4) was eventually characterized by single-crystal X-ray diffraction. Even though compositions of 2, [3a]_0.6[3b]_0.4 and the previous published [Ag₁₀(Se){Se₂P(OEt)₂}₈] (1) are quite similar (10 metals, 1 Se^2-, 8 ligands), their metal core arrangements are completely different. These results show that different synthetic methods by using different starting reagents can affect the structure of the resulting products, leading to polymorphism.

Synthesis, Structures, and Photoluminescence of Elongated Face-Centered-Cubic Ag14 Clusters Containing Lipoic Acid and Its Amide Analogue

Three face-centered-cubic (fcc) silver clusters-namely, [Ag₁₄(LA)₂(HLA)₄(PPh₃)₈]^2- (1), [Ag₁₄(HLA)₆(PPh₃)₈] (2), and [Ag₁₄(NLA)₆(PPh₃)₈] (3)-that are coprotected by lipoic acid (or its amide derivative) and phosphine ligands have been synthesized and structurally characterized (HLA = (±)-α-lipoic acid, LA = (±)-α-lipoate, and NLA = d,l-6,8-thioctamide). These clusters possess two superatomic electrons (the Jellium model), in harmony with a bonding octahedral Ag₆ core capped with 8 Ag atoms. Alternatively, the metal framework of 1-3 can be described as adopting a face-centered cubic (fcc) structure elongated along one of the 3-fold axes. The 12 S atoms from the six bioligands bridge the 12 edges of the (fcc) cube, forming a distorted icosahedron. The counterions, solvent or guest molecules play an important role in dictating the crystal lattices of the products. This is the first report of atom-precise structures of Ag-lipoic acid (or its derivatives) clusters, paving the way for further study of structure-property relationships of these bioligand protected metal nanoclusters. Photoluminescence was observed for cluster 3 with complex temperature-dependent emission patterns and efficiencies.

Recent advances in the self-assembly of polynuclear metal–selenium and –tellurium compounds from 14–16 reagents

The use of reagents containing bonds between group 14 elements and Se or Te for the self-assembly of polynuclear metal–chalcogen compounds is covered. Background material is briefly reviewed and examples from the literature are highlighted from the period 2007–2017. Emphasis is placed on the different classes of 14–16 precursors and their application in the targeted synthesis of metal–chalcogen compounds. The unique properties arising from the combination of specific 14–16 precursors, metal atoms, and ancillary ligands are also described. Selected examples are chosen to underline the progress in (i) controlled synthesis of heterometallic (ternary) chalcogen clusters, (ii) chalcogen clusters with organic functionalized surfaces, and (iii) crystalline open-framework metal chalcogenides.

Formation of an NIR-emitting Ag34S3SBB20(CF3COO)62+ cluster from a hydride-protected silver cluster

Formation of an NIR emitting Ag₃₄S₃SBB₂₀(CF₃COO)₆²⁺ cluster.

Monitoring the growth of Ag–S clusters through crystallization of intermediate clusters

We report a series of Ag–S nanoscale clusters in an attempt to understand the growth process of Ag₂S clusters.

Photoluminescence modulation of an atomically precise silver(i)-thiolate cluster via site-specific surface engineering

A series of pyridyl ligand functionalized silver-thiolate nanoclusters with an identical cuboctahedron Ag12 core were prepared through site-specific surface engineering and fully characterized. Their wide-range photoluminescence modulation was systematically studied.

Formation and Structural Diversity of Organo-Functionalized Tin-Silver Selenide Clusters

When reacting the organic functionalized tin selenide clusters [(SnR¹ )₃ Se₄ Cl] (A, R¹ =CMe₂ CH₂ C(O)Me) or [(SnR¹ )₄ Se₆ ] (B) with (SiMe₃ )₂ Se and [Ag(PPh₃ )₃ Cl] at -78 °C in CH₂ Cl₂ , a microcrystalline intermediate (compound 1) precipitates, which was investigated by magic angle spinning (MAS) NMR spectroscopy, powder X-ray diffraction (PXRD), energy dispersive X-ray (EDX) spectroscopy, and quantum chemistry calculations, to derive information about its composition and structure. Compound 1 re-dissolves under reorganization into the organo-functionalized Ag/Sn/Se cluster compound [Ag₆ (μ₆ -Se)(Ag₈ Se₁₂ ){(R¹ Sn)₂ Se₂ }₆ ] (2), or the mixed-valence cluster [(AgPPh₃ )₂ (Sn^II Cl)₂ Se₂ {(R¹ Sn^IV )₂ Se₂ }₂ ] (3), depending on the presence or the exclusion of daylight, respectively. The addition of N₂ H₄ ⋅H₂ O to a solution of 1 yields selectively [Ag₇ (μ₇ -Se)(Ag₇ Se₁₂ ){(R² Sn)₂ Se₂ }₆ ] (4, R² =CMe₂ CH₂ C(N₂ H₂ )Me), the Ag/Sn/Se core of which is isomeric to that of 2. 2-4 were characterized by X-ray diffraction. NMR spectroscopic studies on solutions of 1 indicate the co-existence of different species.

[Ag115S34(SCH2C6H4t Bu)47(dpph)6]: synthesis, crystal structure and NMR investigations of a soluble silver chalcogenide nanocluster

With the aim to synthesize soluble cluster molecules, the silver salt of (4-(tert-butyl)phenyl)methanethiol [AgSCH2C6H4t Bu] was applied as a suitable precursor for the formation of a nanoscale silver sulfide cluster. In the presence of 1,6-(diphenylphosphino)hexane (dpph), the 115 nuclear silver cluster [Ag115S34(SCH2C6H4t Bu)47(dpph)6] was obtained. The molecular structure of this compound was elucidated by single crystal X-ray analysis and fully characterized by spectroscopic techniques. In contrast to most of the previously published cluster compounds with more than a hundred heavy atoms, this nanoscale inorganic molecule is soluble in organic solvents, which allowed a comprehensive investigation in solution by UV-Vis spectroscopy and one- and two-dimensional NMR spectroscopy including 31P/109Ag-HSQC and DOSY experiments. These are the first heteronuclear NMR investigations on coinage metal chalcogenides. They give some first insight into the behavior of nanoscale silver sulfide clusters in solution. Additionally, molecular weight determinations were performed by 2D analytical ultracentrifugation and HR-TEM investigations confirm the presence of size-homogeneous nanoparticles present in solution.

Two types of lanthanide selenidostannates(IV) first prepared under the same solvothermal conditions

Two types of lanthanide selenidostannates(iv) [Ln2(tepa)2(μ-OH)2Sn2Se6] {Ln = Y(), Pr (), Dy (), Er (), Tm (); tepa = tetraethylenepentamine} and [Ln2(tepa)2(μ2-OH)2Cl2]2[Sn4Se10]·4H2O {Ln = Y (), Dy (), Er (), Tm ()} have been synthesized under identical solvothermal conditions and characterized structurally. Type I (, , , and ) displays 1-D neutral chains [Ln2(tepa)2(μ-OH)2Sn2Se6]n, while type II (, , and ) contains discrete adamantane-like [Sn4Se10](4-) ions with binuclear lanthanide complex [Ln2(tepa)2(μ-OH)2Cl2](2+) ions as counterions. Although the solvothermal synthetic methods could result in the formation of various transition-metal chalcogenidometalates, such identical experimental conditions usually result in the only stable phases of lanthanide chalcogenidometalates. Hence, two different lanthanide selenidostannates(iv), obtained under same solvothermal conditions and starting materials, have been first observed in this work. The optical properties of all the compounds have been investigated by UV-vis spectra.

Bronze, silver and gold: functionalized group 11 organotin sulfide clusters

The synthesis, properties and reactivity of group 11 organotin sulfide clusters [(R(1)Sn)4(SnCl)2(MPPh3)2S8] (M = Cu, Ag), [(R(3)Sn)10Ag10S20], and [(R(1,3)Sn)2(AuPPh3)2S4] with covalently bound, carbonyl or hydrazine-terminated ligands R(1) = CMe2CH2C(Me)O or R(3) = CMe2CH2C(Me)NNH2 are reported.

N-Heterocyclic carbene stabilized Ag–P nanoclusters

The N-heterocyclic carbene (NHC) 1,3-di-isopropylbenzimidazole-2-ylidene (ⁱPr₂-bimy) is found to be an excellent ligand for the stabilization of silver–phosphorus polynuclear complexes.