Purification, properties, and multiple forms of a manganese-activated inorganic pyrophosphatase from Bacillus subtilis

Ionic Liquids as Protein Crystallization Additives

Among its attributes, the mythical philosopher’s stone is supposedly capable of turning base metals to gold or silver. In an analogous fashion, we are finding that protein crystallization optimization using ionic liquids (ILs) often results in the conversion of base protein precipitate to crystals. Recombinant inorganic pyrophosphatases (8 of the 11 proteins) from pathogenic bacteria as well as several other proteins were tested for optimization by 23 ILs, plus a dH₂O control, at IL concentrations of 0.1, 0.2, and 0.4 M. The ILs were used as additives, and all proteins were crystallized in the presence of at least one IL. For 9 of the 11 proteins, precipitation conditions were converted to crystals with at least one IL. The ILs could be ranked in order of effectiveness, and it was found that ~83% of the precipitation-derived crystallization conditions could be obtained with a suite of just eight ILs, with the top two ILs accounting for ~50% of the hits. Structural trends were found in the effectiveness of the ILs, with shorter-alkyl-chain ILs being more effective. The two top ILs, accounting for ~50% of the unique crystallization results, were choline dihydrogen phosphate and 1-butyl-3-methylimidazolium tetrafluoroborate. Curiously, however, a butyl group was present on the cation of four of the top eight ILs.

The tetrameric structure of nucleotide-regulated pyrophosphatase and its modulation by deletion mutagenesis and ligand binding

A quarter of prokaryotic Family II inorganic pyrophosphatases (PPases) contain a regulatory insert comprised of two cystathionine β-synthase (CBS) domains and one DRTGG domain in addition to the two catalytic domains that form canonical Family II PPases. The CBS domain-containing PPases (CBS-PPases) are allosterically activated or inhibited by adenine nucleotides that cooperatively bind to the CBS domains. Here we use chemical cross-linking and analytical ultracentrifugation to show that CBS-PPases from Desulfitobacterium hafniense and four other bacterial species are active as 200-250-kDa homotetramers, which seems unprecedented among the four PPase families. The tetrameric structure is stabilized by Co²⁺, the essential cofactor, pyrophosphate, the substrate, and adenine nucleotides, including diadenosine tetraphosphate. The deletion variants of dhPPase containing only catalytic or regulatory domains are dimeric. Co²⁺ depletion by incubation with EDTA converts CBS-PPase into inactive tetrameric and dimeric forms. Dissociation of tetrameric CBS-PPase and its catalytic part by dilution renders them inactive. The structure of CBS-PPase tetramer was modelled from the structures of dimeric catalytic and regulatory parts. These findings signify the role of the unique oligomeric structure of CBS-PPase in its multifaced regulation.

Structural and Biochemical Characterization of Apicomplexan Inorganic Pyrophosphatases

Inorganic pyrophosphatases (PPase) participate in energy cycling and they are essential for growth and survival of organisms. Here we report extensive structural and functional characterization of soluble PPases from the human parasites Plasmodium falciparum (PfPPase) and Toxoplasma gondii (TgPPase). Our results show that PfPPase is a cytosolic enzyme whose gene expression is upregulated during parasite asexual stages. Cambialistic PfPPase actively hydrolyzes linear short chain polyphosphates like PP_i, polyP₃ and ATP in the presence of Zn²⁺. A remarkable new feature of PfPPase is the low complexity asparagine-rich N-terminal region that mediates its dimerization. Deletion of N-region has an unexpected and substantial effect on the stability of PfPPase domain, resulting in aggregation and significant loss of enzyme activity. Significantly, the crystal structures of PfPPase and TgPPase reveal unusual and unprecedented dimeric organizations and provide new fundamental insights into the variety of oligomeric assemblies possible in eukaryotic inorganic PPases.

Expression, purification, and characterization of cold-adapted inorganic pyrophosphatase from psychrophilic Shewanella sp. AS-11

In the presence of divalent cations, inorganic pyrophosphatase is activated to hydrolyze inorganic pyrophosphate to inorganic phosphate. Here, we clone, express, purify, and characterize inorganic pyrophosphatase from the psychrophilic Shewanella sp. AS-11 (Sh-PPase). The recombinant Sh-PPase was expressed in Escherichia coli BL21 (DE3) at 20°C using pET16b as an expression vector and purified from the cell extracts by a combination of ammonium sulfate fractionation and anion-exchange chromatography. Sh-PPase was found to be a family II PPase with a subunit molecular mass of 34 kD that preferentially utilizes Mn²⁺ over Mg²⁺ ions for activity. The functional characteristics of Sh-PPase, such as activity, temperature dependency, and thermal inactivation, were greatly influenced by manganese ions. Manganese ion activation increased the enzyme's activity at low temperatures; therefore, it was required to gain the cold-adapted characteristics of Sh-PPase.

The Crystal Structure of the Cytosolic Exopolyphosphatase from Saccharomyces cerevisiae Reveals the Basis for Substrate Specificity

Inorganic long-chain polyphosphate is a ubiquitous linear polymer in biology, consisting of many phosphate moieties linked by phosphoanhydride bonds. It is synthesized by polyphosphate kinase, and metabolised by a number of enzymes, including exo- and endopolyphosphatases. The Saccharomyces cerevisiae gene PPX1 encodes for a 45 kDa, metal-dependent, cytosolic exopolyphosphatase that processively cleaves the terminal phosphate group from the polyphosphate chain, until inorganic pyrophosphate is all that remains. PPX1 belongs to the DHH family of phosphoesterases, which includes: family-2 inorganic pyrophosphatases, found in Gram-positive bacteria; prune, a cyclic AMPase; and RecJ, a single-stranded DNA exonuclease. We describe the high-resolution X-ray structures of yeast PPX1, solved using the multiple isomorphous replacement with anomalous scattering (MIRAS) technique, and its complexes with phosphate (1.6 A), sulphate (1.8 A) and ATP (1.9 A). Yeast PPX1 folds into two domains, and the structures reveal a strong similarity to the family-2 inorganic pyrophosphatases, particularly in the active-site region. A large, extended channel formed at the interface of the N and C-terminal domains is lined with positively charged amino acids and represents a conduit for polyphosphate and the site of phosphate hydrolysis. Structural comparisons with the inorganic pyrophosphatases and analysis of the ligand-bound complexes lead us to propose a hydrolysis mechanism. Finally, we discuss a structural basis for substrate selectivity and processivity.

Inositol-1 (or 4)-monophosphatase from Glycine max embryo axes is a phosphatase with broad substrate specificity that includes phytate dephosphorylation

A phosphate-hydrolyzing activity from Glycine max embryo axes was purified by a series of chromatographic steps and electroelution from activity gels, and demonstrated to be an inositol-1 (or 4)-monophosphatase by partial internal amino acid sequence. This enzyme hydrolyzed ATP, sodium pyrophosphate (NaPPi), inositol hexakisphosphate, and inositol 1-monophosphate, but not p-nitrophenyl phosphate, ADP, AMP or glucose 6-P. Using NaPPi as substrate, the highly purified protein hydrolyzed up to 0.4 mmol phosphate min(-1) mg(-1) protein and had a Km(avg) of 235 microM for NaPPi. Since NaPPi is relatively inexpensive and readily available, we used this as substrate for the subsequent characterization. We observed the following: (a) specific inhibition by Li and NaF but not by butanedione monoxime, or orthovanadate; (b) activation by Cu(2+) and Mg(2+); (c) optimum activity at pH 7.4; and (d) temperature stability after 1-h incubations at 37-80 degrees C, with maximum activity at 37 degrees C. The partially purified protein was detected by in-gel activity assays and the band was electroeluted to yield a highly purified protein. Analysis by SDS-PAGE and native IEF-PAGE yielded a single major polypeptide of 29 kDa and pI approximately 5.9, respectively. In addition, in-gel activity from embryo axes and whole hypocotyls at early germination times revealed one high and one intermediate molecular weight isoform, but only the intermediate one corresponded to IMPase. Throughout the post-imbibition period, the activity of the high molecular weight isoform disappeared and IMPase increased, indicating an increasing expression of the enzyme as germination and growth proceeded. These data indicate that the inositol-1 (or 4)-monophosphatase present in the embryo axis of G. max has a wide phosphate substrate specificity, and may play an important role in phosphate metabolism during the germination process.

Streptococcus gordonii soluble inorganic pyrophosphatase: An important role for the interdomain region in enzyme activity

Streptococcus gordonii DL1(Challis) soluble inorganic pyrophosphatase was shown to be a homo dimer with a subunit molecular mass of 33407. In solution, in the presence of Mn(2+), the protein is ellipsoidal with an axial ratio of 3.37 and molecular mass of 67000. In the absence of the divalent cation, the molecular mass is unchanged but the axial ratio increases to 3.94. The enzyme, in the presence of 5 mM Mg(2+), at 25 degrees Celsius and pH 9.0, has K(m) and k(cat) values of 62 microM and 6290 s(-1), respectively. The free N- and C-terminal domains of Streptococcus gordonii PPase did not interact productively when mixed together. Replacing the interdomain region with that from Bacillus subtilis decreased the catalytic efficiency of the enzyme whereas inserting the same region from the Archaeglobus fulgidus thermophilic enzyme yielded an inactive protein. Substitution, deletion and insertion of amino acid residues in the interdomain region were found to affect the monomer dimer equilibrium in the absence of Mn(2+) ions. In the presence of these ions however the variant proteins were dimers. Proteins with altered interdomain regions also displayed a 2- to 625-fold decrease in catalytic efficiency. These data together with that of computer analysis show that the interdomain region has characteristics of a mechanical hinge. Modelling mutant proteins onto the wild type shows that the active site regions are not significantly perturbed. These results show that, although distant from the active site, the interdomain region plays a role in enzyme activity and both its length and composition are important. This supports the hypothesis that catalytic activity requires the N- and C terminal domains of the enzyme to open and close using the interdomain region as a hinge.

Rhodobacter sphaeroides has a family II pyrophosphatase: comparison with other species of photosynthetic bacteria

The cytoplasmic pyrophosphatase from Rhodobacter sphaeroides was purified and characterized. The enzyme is a homodimer of 64 kDa. The N-terminus was sequenced and used to obtain the complete pyrophosphatase sequence from the preliminary genome sequence of Rba. sphaeroides, showing extensive sequence similarity to family II or class C pyrophosphatases. The enzyme hydrolyzes only Mg-PP(i) and Mn-PP(i) with a K(m) of 0.35 mM for both substrates. It is not activated by free Mg (2+), in contrast to the cytoplasmic pyrophosphatase from Rhodospirillum rubrum, and it is not inhibited by NaF, methylendiphosphate, or imidodiphosphate. This work shows that Rba. sphaeroides and Rhodobacter capsulatus cytoplasmic pyrophosphatases belong to family II, in contrast to Rsp. rubrum, Rhodopseudomonas palustris, Rhodopseudomonas gelatinosa, and Rhodomicrobium vannielii cytoplasmic pyrophosphatases which should be classified as members of family I. This is the first report of family II cytoplasmic pyrophosphatases in photosynthetic bacteria and in a gram-negative organism.

Bacillus subtilis inorganic pyrophosphatase: the C-terminal signature sequence is essential for enzyme activity and conformational integrity

Bacillus subtilis inorganic pyrophosphatase is the first member of a newly identified Family II of PPases. To examine the role of a signature sequence found near the C-terminus, two truncated variants and a series of site-specific mutants were produced. A truncation of 17 residues (17AATR) but also single alanine substitutions, R295A and K296A, produced inactive enzyme. Removal of 5 nonconserved terminal residues (5AATR) markedly affected enzyme stability. Replacing S294 with A, T, C, or V decreased activity, the latter two mutations showing the greatest effect. Substitutions V299I and V300I had no or minor effects, whereas V300W and V299G/V300W significantly reduced activity. The sizes of truncated proteins and the full-length PPase were indistinguishable by gel-filtration. We conclude that the C-terminus has no role in multimerization, while both its conserved and nonconserved regions are essential for full enzyme activity. The signature sequence is required for both the conformation and composition of the active site.

The "open" and "closed" structures of the type-C inorganic pyrophosphatases from Bacillus subtilis and Streptococcus gordonii

Recently, a new class of soluble inorganic pyrophosphatase (type-C PPase) has been described that is not homologous in amino acid sequence or kinetic properties to the well-studied PPases (types A and B) found in many organisms from bacteria to humans and thought to be essential to the cell. Structural studies of the type-C PPases from Streptococcus gordonii and Bacillus subtilis reveal a homodimeric structure, with each polypeptide folding into two domains joined by a flexible hinge. The active site, formed at the interface between the N and C-terminal domains, binds two manganese ions approximately 3.6 A apart in a conformation resembling binuclear metal centres found in other hydrolytic enzymes. An activated water molecule bridging the two metal ions is likely poised for nucleophilic attack of the substrate. Importantly, the S. gordonii and B. subtilis enzymes have crystallised in strikingly different conformations. In both subunits of the S. gordonii crystal structure (1.5 A resolution) the C-terminal domain is positioned such that the active site is occluded, with a sulphate ion bound in the active site. In contrast, in the B. subtilis structure (3.0 A resolution) the C-terminal domain is rotated by about 90 degrees, leaving the active site wide open and accessible for substrate binding.

Expression in Escherichia coli of the thermostable inorganic pyrophosphatase from the Aquifex aeolicus and purification and characterization of the recombinant enzyme

The gene encoding the inorganic pyrophosphatase from a hyperthermophilic bacterium, Aquifex aeolicus (Aae), was amplified by PCR. Then, the gene was overexpressed in Escherichia coli using a pJR-based expression plasmid, pAIPD. The recombinant Aae pyrophosphatase was purified 16.2-fold with a 53.4% yield and a specific activity of 34 U/mg protein by a combination of heating (to denature E. coli proteins) and two steps of DEAE-Sephacel column chromatography (nonabsorbed enzyme at pH 7.3 and absorbed enzyme at pH 8.0). This enzyme has an approximate molecular mass of 105,000 Da and consists of four subunits, each with a molecular mass of 24,500 Da. The enzyme shows the optimal activity in the pH range 7.5-8.0. The enzyme was stable at 80-95 degrees C. A divalent cation was absolutely required for the enzyme activity, Mg(2+) being most effective.

Directed mutagenesis studies of the C-terminal fingerprint region of Bacillus subtilis pyrophosphatase

The sequence SRKKQxxP near the C-terminus is conserved in pyrophosphatases of the recently discovered family II and includes a triplet of positively charged residues, two of which (Arg295 and Lys296 in Bacillus subtilis pyrophosphatase) are part of the active site and one (Lys297) is not. The importance of this triplet for catalysis by B. subtilis pyrophosphatase has been estimated by mutational analysis. R295K and K296R substitutions were found to decrease the catalytic constant 650- and 280-fold, respectively, and decrease the pK(a) of the essential acidic group by 1.1 and 0.5, respectively. K297R substitution was found to increase the catalytic constant 4.7-fold and to markedly change the protein circular dichroism spectrum in the range 250-300 nm. These results, together with the results of theoretical modelling of the enzyme-substrate complex, provide support for the direct involvement of Arg295 and Lys296 in substrate binding in family II pyrophosphatases.

Quaternary structure and metal ion requirement of family II pyrophosphatases from Bacillus subtilis, Streptococcus gordonii, and Streptococcus mutans

Pyrophosphatase (PPase) from Bacillus subtilis has recently been found to be the first example of a family II soluble PPase with a unique requirement for Mn2+. In the present work, we cloned and overexpressed in Escherichia coli putative genes for two more family II PPases (from Streptococcus mutans and Streptococcus gordonii), isolated the recombinant proteins, and showed them to be highly specific and active PPases (catalytic constants of 1700-3300 s(-)1 at 25 degrees C in comparison with 200-400 s(-)1 for family I). All three family II PPases were found to be dimeric manganese metalloenzymes, dissociating into much less active monomers upon removal of Mn2+. The dimers were found to have one high affinity manganese-specific site (K(d) of 0.2-3 nm for Mn2+ and 10-80 microm for Mg2+) and two or three moderate affinity sites (K(d) approximately 1 mm for both cations) per subunit. Mn2+ binding to the high affinity site, which occurs with a half-time of less than 10 s at 1.5 mm Mn2+, dramatically shifts the monomer <--> dimer equilibrium in the direction of the dimer, further activates the dimer, and allows substantial activity (60-180 s(-)1) against calcium pyrophosphate, a potent inhibitor of family I PPases.

Crystal structure of Streptococcus mutans pyrophosphatase: a new fold for an old mechanism

BACKGROUND

Streptococcus mutans pyrophosphatase (Sm-PPase) is a member of a relatively uncommon but widely dispersed sequence family (family II) of inorganic pyrophosphatases. A structure will answer two main questions: is it structurally similar to the family I PPases, and is the mechanism similar?

RESULTS

The first family II PPase structure, that of homodimeric Sm-PPase complexed with metal and sulfate ions, has been solved by X-ray crystallography at 2.2 A resolution. The tertiary fold of Sm-PPase consists of a 189 residue alpha/beta N-terminal domain and a 114 residue mixed beta sheet C-terminal domain and bears no resemblance to family I PPase, even though the arrangement of active site ligands and the residues that bind them shows significant similarity. The preference for Mn2+ over Mg2+ in family II PPases is explained by the histidine ligands and bidentate carboxylate coordination. The active site is located at the domain interface. The C-terminal domain is hinged to the N-terminal domain and exists in both closed and open conformations.

CONCLUSIONS

The active site similiarities, including a water coordinated to two metal ions, suggest that the family II PPase mechanism is "analogous" (not "homologous") to that of family I PPases. This is a remarkable example of convergent evolution. The large change in C-terminal conformation suggests that domain closure might be the mechanism by which Sm-PPase achieves specificity for pyrophosphate over other polyphosphates.

Methanococcus jannaschii ORF mj0608 codes for a class C inorganic pyrophosphatase protected by Co(2+) or Mn(2+) ions against fluoride inhibition

Openreading frame mj0608 of the Methanococcus jannaschii genome, recognized by its sequence similarity to that of the gene coding for class C inorganic pyrophosphatase in Bacillus subtilis, was cloned and over-expressed in Escherichia coli. The protein was purified and characterized by SDS-PAGE, M(r), and N-terminal sequence. Under suitable conditions it catalyzed the specific hydrolysis of PPi at about 600 micromol x min(-1) x mg(-1) at 25 degrees C, and at 8000 micromol x min(-1) x mg(-1) at 85 degrees C. Therefore this protein is a specific inorganic pyrophosphatase. The activities of Mg(2+), Mn(2+), Co(2+), and Zn(2+) ions as cofactors for hydrolysis of PPi were compared at pH 7.5 and 9.0. Unlike the class C pyrophosphatase of B. subtilis, this enzyme required no prior activation by low concentrations of Mn(2+) or Co(2+) ions. However, prior exposure to these ions afforded striking protection against inhibition by sodium fluoride, to which the enzyme was otherwise very sensitive.

Cloning and characterization of a bifunctional RelA/SpoT homologue from Mycobacterium tuberculosis

A 2.2kb relA/spoT homologue was isolated from Mycobacterium tuberculosis (Mtb) genomic DNA by PCR-amplification. The Mtb gene encodes a protein of 738 amino acid residues, and is flanked upstream by an ORF that is highly similar to the apt gene, and downstream by an ORF that is highly similar to the cypH gene. This dual function Mtb homologue belongs to the relA/spoT family of genes that mediate the stringent response by regulating the synthesis and degradation of guanosine 3',5'-bis(diphosphate) (ppGpp) and pppGpp. In vitro biochemical data indicate that purified RelMtb is a ribosome- and tRNA-independent ATP:GTP/GDP/ITP 3'-pyrophosphoryltransferase. Additionally, purified RelMtb is an Mn2+-dependent, ribosome and tRNA-independent, (p)ppGpp 3'-pyrophosphohydrolase. These reactions were also assessed in vivo in E. coli deleted in both the relA and spoT genes, which generates a (p)ppGpp0 phenotype. RelMtb can suppress this phenotype and can generate more (p)ppGpp than relA in the wild type E. coli control.

Cloning and expression of a unique inorganic pyrophosphatase from Bacillus subtilis: evidence for a new family of enzymes

An open reading frame located in the COTF-TETB intergenic region of Bacillus subtilis was cloned and expressed in Escherichia coli and shown to encode inorganic pyrophosphatase (PPase). The isolated enzyme is Mn2+-activated, like the authentic PPase isolated from B. subtilis. Although 13 functionally important active site residues are conserved in all 31 soluble PPase sequences so far identified, only two of them are conserved in B. subtilis PPase. This suggests that B. subtilis PPase represents a new family of soluble PPases (a Bs family), putative members of which were found in Archaeoglobus fulgidus, Methanococcus jannaschii, Streptococcus mutans and Streptococcus gordonii.

Bacillus subtilis ORF yybQ encodes a manganese-dependent inorganic pyrophosphatase with distinctive properties: the first of a new class of soluble pyrophosphatase?

The N-terminal 15 amino acids of the major protein associated with inorganic pyrophosphatase activity in Bacillus subtilis WB600 are identical to those of B. subtilis ORF yybQ. This ORF was amplified from B. subtilis WB600 DNA by PCR and cloned into an overexpression vector in Escherichia coli. Induction of overexpression produced a soluble protein of 34,000 Da by SDS-PAGE and by matrix-assisted laser desorption and ionization mass spectrometry. The overexpressed protein had a high specific activity for the hydrolysis of magnesium pyrophosphate, and was specifically and reversibly activated by Mn2+ ions. These properties are identical to those of inorganic pyrophosphatase purified from B. subtilis WB600. No significant similarity was found between the derived sequence of the B. subtilis yybQ-encoded protein and published sequences of identified inorganic pyrophosphatases of Eukarya, Bacteria or Archaea domains. However, there is significant similarity to three putative proteins of unknown function from the archaea Methanococcus jannaschii and Archaeoglobus fulgidus, and from Streptococcus gordonii. The genomes of B. subtilis, M. jannaschii and A. fulgidus do not contain sequences similar to those of hitherto known soluble inorganic pyrophosphatases. The present findings, together with a survey of the properties of inorganic pyrophosphatases from 38 different sources, suggest that the B. subtilis yybQ-encoded protein is the first fully characterized member of a new class of inorganic pyrophosphatase.