Highly sensitive and specific detection of viable Escherichia coli in drinking water

Progress in methods for the detection of viable Escherichia coli

Escherichia coli (E. coli) is a prevalent enteric bacterium and a necessary organism to monitor for food safety and environmental purposes. Developing efficient and specific methods is critical for detecting and monitoring viable E. coli due to its high prevalence. Conventional culture methods are often laborious and time-consuming, and they offer limited capability in detecting potentially harmful viable but non-culturable E. coli in the tested sample, which highlights the need for improved approaches. Hence, there is a growing demand for accurate and sensitive methods to determine the presence of viable E. coli. This paper scrutinizes various methods for detecting viable E. coli, including culture-based methods, molecular methods that target DNAs and RNAs, bacteriophage-based methods, biosensors, and other emerging technologies. The review serves as a guide for researchers seeking additional methodological options and aiding in the development of rapid and precise assays. Moving forward, it is anticipated that methods for detecting E. coli will become more stable and robust, ultimately contributing significantly to the improvement of food safety and public health.

Application of DNA Nanotweezers in biosensing: Nanoarchitectonics and advanced challenges

Deoxyribonucleic acid (DNA) is a carrier of genetic information. DNA hybridization is characterized by predictability, diversity, and specificity owing to the strict complementary base-pairing assembly mode, which stimulates the use of DNA to build a variety of nanomachines, including DNA tweezers, motors, walkers, and robots. DNA nanomachines have become prevalent for signal amplification and transformation in the field of biosensing, providing a new method for constructing highly sensitive sensing analysis strategies. DNA tweezers have exhibited unique advantages in biosensing applications owing to their simple structures and fast responses. The two-state conformation of DNA tweezers, the open and closed states, enable them to open and close autonomously after stimulation, thus facilitating the quick detection of corresponding signal changes of different targets. This review discusses the recent progress in the application of DNA nanotweezers in the field of biosensing, and the trends in their development for application in the field of biosensing are summarized.

Bacterial drug-resistance and viability phenotyping upon disinfectant exposure revealed by single-nucleotide resolved-allele specific isothermal RNA amplification

Disinfectant abuse poses a risk of bacterial evolution against stresses, especially during the coronavirus disease 2019 (COVID-19) pandemic. However, bacterial phenotypes, such as drug resistance and viability, are hard to access quickly. Here, we reported an allele specific isothermal RNA amplification (termed AlleRNA) assay, using an isothermal RNA amplification technique, i.e., nucleic acid sequence-based amplification (NASBA), integrated the amplification refractory mutation system (ARMS), involving the use of sequence-specific primers to allow the amplification of the targets with complete complementary sequences. AlleRNA assay enables rapid and simultaneous detection of the single nucleotide polymorphism (SNP) (a detection limit, a LOD of 0.5 % SNP) and the viability (a LOD of 80 CFU) of the quinolone resistant Salmonella enterica. With the use of AlleRNA assay, we found that the quinolone resistant S. enterica exhibited higher survival ability during exposure toquaternary ammonium salt, 75 % ethanol and peracetic acid, which might be attributed to the upregulation of stress response-associated genescompared with the susceptible counterparts. Additionally, the AlleRNA assay indicated the potential risk in a high-frequency occurrence of viable but nonculturable (VBNC) quinolone resistant S. enterica induced by disinfectants due to the depression of ATP biosynthesis. The excessive usage of disinfectants during the COVID-19 pandemic should be carefully evaluated due to the latent threat to ecological and human health.

A duplex real-time NASBA assay targeting serotype-specific gene for rapid detection of viable S. enterica serovar Paratyphi C in retail foods of animal origin

Salmonella enterica serovars Paratyphi C is highly adapted to humans and can cause a typhoid-like disease with high mortality rates. In this study, three serovar-specific genes were determined for S. Paratyphi C, SPC_0871，SPC_0872, and SPC_0908, by comparative genomics method. Based on SPC_0908 and xcd gene for testing Salmonella spp., we have developed a duplex real-time nucleic acid sequence-based amplification (real-time NASBA) with molecular beacon approach for simultaneous detection of viable cells of Salmonella spp. and serotype Paratyphi C. The test selectively and consistently detected 53 Salmonella spp. (representing 31 serotypes) and 18 non-Salmonella strains. Additionally, the method showed high resistance to interference by natural background flora in pork and chicken samples. The sensitivity of the established approach was determined to be 4.89 CFU/25 g in artificially contaminated pork and chicken samples after pre-enrichment. We propose this NASBA-based protocol as a potential detection method for Salmonella spp. and serotype Paratyphi C in food of animal origin.

Electroanalytical Overview: Electrochemical Sensing Platforms for Food and Drink Safety

Robust, reliable, and affordable analytical techniques are essential for screening and monitoring food and water safety from contaminants, pathogens, and allergens that might be harmful upon consumption. Recent advances in decentralised, miniaturised, and rapid tests for health and environmental monitoring can provide an alternative solution to the classic laboratory-based analytical techniques currently utilised. Electrochemical biosensors offer a promising option as portable sensing platforms to expedite the transition from laboratory benchtop to on-site analysis. A plethora of electroanalytical sensor platforms have been produced for the detection of small molecules, proteins, and microorganisms vital to ensuring food and drink safety. These utilise various recognition systems, from direct electrochemical redox processes to biological recognition elements such as antibodies, enzymes, and aptamers; however, further exploration needs to be carried out, with many systems requiring validation against standard benchtop laboratory-based techniques to offer increased confidence in the sensing platforms. This short review demonstrates that electroanalytical biosensors already offer a sensitive, fast, and low-cost sensor platform for food and drink safety monitoring. With continued research into the development of these sensors, increased confidence in the safety of food and drink products for manufacturers, policy makers, and end users will result.

Recombinase polymerase amplification for fast, selective, DNA-based detection of faecal indicator Escherichia coli

The bacterium Escherichia coli is commonly associated with the presence of faecal contamination in environmental samples, and is therefore subject to statutory surveillance. This is normally done using a culture-based methodology, which can be slow and laborious. Nucleic acid amplification for the detection of E. coli DNA sequences is a significantly more rapid approach, suited for applications in the field such as a point of sample analysis, and to provide an early warning of contamination. An existing, high integrity qPCR method to detect the E. coli ybbW gene, which requires almost an hour to detect low quantities of the target, was compared with a novel, isothermal RPA method, targeting the same sequence but achieving the result within a few minutes. The RPA technique demonstrated equivalent inclusivity and selectivity, and was able to detect DNA extracted from 100% of 99 E. coli strains, and exclude 100% of 30 non-target bacterial species. The limit of detection of the RPA assay was at least 100 target sequence copies. The high speed and simple, isothermal amplification chemistry may indicate that RPA is a more suitable methodology for on-site E. coli monitoring than an existing qPCR technique.

Electrochemical Immuno- and Aptamer-Based Assays for Bacteria: Pros and Cons over Traditional Detection Schemes

Microbiological safety of the human environment and health needs advanced monitoring tools both for the specific detection of bacteria in complex biological matrices, often in the presence of excessive amounts of other bacterial species, and for bacteria quantification at a single cell level. Here, we discuss the existing electrochemical approaches for bacterial analysis that are based on the biospecific recognition of whole bacterial cells. Perspectives of such assays applications as emergency-use biosensors for quick analysis of trace levels of bacteria by minimally trained personnel are argued.

Early detection of E. coli and total coliform using an automated, colorimetric and fluorometric fiber optics-based device

Lack of access to clean water is a major global issue that affects millions of people worldwide. Drinking contaminated water can be extremely hazardous, so it is imperative that it is tested sufficiently. One method commonly used to determine the quality of water is testing for both E. coli and total coliform. Here, we present a cost-effective and automated device which can concurrently test drinking water samples for both E. coli and total coliform using an EPA-approved reagent. Equipped with a Raspberry Pi microcontroller and camera, we perform automated periodic measurements of both the absorption and fluorescence of the water under test over 24 hours. In each test, 100 mL of the water sample is split into a custom designed 40-well plate, where the transmitted blue light and the fluorescent light (under UV excitation) are collected by 520 individual optical fibers. Images of these fiber outputs are then acquired periodically, and digitally processed to determine the presence of the bacteria in each well of the 40-well plate. We demonstrate that this cost-effective device, weighing 1.66 kg, can automatically detect the presence of both E. coli and total coliform in drinking water within ∼16 hours, down to a level of one colony-forming unit (CFU) per 100 mL. Furthermore, due to its automated analysis, this approach is also more sensitive than a manual count performed by an expert, reducing the time needed to determine whether the water under test is safe to drink or not.

Conjugated Oligo- and Polymers for Bacterial Sensing

Fast and accurate detection of bacteria and differentiation between pathogenic and commensal colonization are important keys in preventing the emergence and spread of bacterial resistance toward antibiotics. As bacteria undergo major lifestyle changes during colonization, bacterial sensing needs to be achieved on different levels. In this review, we describe how conjugated oligo- and polymers are used to detect bacterial colonization. We summarize how oligothiophene derivatives have been tailor-made for detection of biopolymers produced by a wide range of bacteria upon entering the biofilm lifestyle. We further describe how these findings are translated into diagnostic approaches for biofilm-related infections. Collectively, this provides an overview on how synthetic biorecognition elements can be used to produce fast and easy diagnostic tools and new methods for infection control.

Modern Approach to Medical Diagnostics - the Use of Separation Techniques in Microorganisms Detection

Background:

Analytical chemistry and biotechnology as an interdisciplinary fields of science have been developed during many years and are experiencing significant growth, to cover a wide range of microorganisms separation techniques and methods, utilized for medical therapeutic and diagnostic purposes. Currently scientific reports contribute by introducing electrophoretical and immunological methods and formation of devices applied in food protection (avoiding epidemiological diseases) and healthcare (safety ensuring in hospitals).

Methods:

Electrophoretic as well as nucleic-acid-based or specific immunological methods have contributed tremendously to the advance of analyses in recent three decades, particularly in relation to bacteria, viruses and fungi identifications, especially in medical in vitro diagnostics, as well as in environmental or food protection.

Results:

The paper presents the pathogen detection competitiveness of these methods against conventional ones, which are still too time consuming and also labor intensive. The review is presented in several parts following the current trends in improved pathogens separation and detection methods and their subsequent use in medical diagnosis.

Discussion:

Part one, consists of elemental knowledge about microorganisms as an introduction to their characterization: descriptions of divisions, sizes, membranes (cells) components. Second section includes the development, new technological and practical solution descriptions used in electrophoretical procedures during microbes analyses, with special attention paid to bio-samples analyses like blood, urine, lymph or wastewater. Third part covers biomolecular areas that have created a basis needed to identify the progress, limitations and challenges of nucleic-acid-based and immunological techniques discussed to emphasize the advantages of new separative techniques in selective fractionating of microorganisms.

A New Tactic for Label-Free Recognition of β-Trophin via Electrochemiluminescent Signalling on an AuNPs Supported Immuno-Interface

In this paper, a new strategy is reported for preparing a label-free β-trophin electrochemiluminescent (ECL) immunosensor with good specificity, reproducibility and stability. An aquagel polymer from the hydrolysis of (3-aminopropyl) trimethoxysilane acted as the linker to catch the Au nanoparticles (AuNPs) on the indium-tin oxide (ITO) substrate by a two-step method. The AuNPs play an important role in enhancing ECL and immobilizing the β-trophin antibody. This immunosensor can test for β-trophin using luminol as an ECL probe. The ECL intensity at the resultant sensor, after the direct immuno-interaction, was proportional to the concentration of β-trophin and had a low limit of quantification as 4.2 ng mL⁻¹. After deep discussions on the ECL mechanism of this immunosensor, we found that its sensitivity is greatly affected by the presence of oxygen and improved under deoxygenation. We believe that this sensor can be used for clinical cases.

Advanced molecular diagnostic techniques for detection of food-borne pathogens: Current applications and future challenges

The elimination of disease-causing microbes from the food supply is a primary goal and this review deals with the overall techniques available for detection of food-borne pathogens. Now-a-days conventional methods are replaced by advanced methods like Biosensors, Nucleic Acid-based Tests (NAT), and different PCR-based techniques used in molecular biology to identify specific pathogens. Bacillus cereus, Staphylococcus aureus, Proteus vulgaris, Escherichia coli, Campylobacter, Listeria monocytogenes, Salmonella spp., Aspergillus spp., Fusarium spp., Penicillium spp., and pathogens are detected in contaminated food items that cause always diseases in human in any one or the other way. Identification of food-borne pathogens in a short period of time is still a challenge to the scientific field in general and food technology in particular. The low level of food contamination by major pathogens requires specific sensitive detection platforms and the present area of hot research looking forward to new nanomolecular techniques for nanomaterials, make them suitable for the development of assays with high sensitivity, response time, and portability. With the sound of these, we attempt to highlight a comprehensive overview about food-borne pathogen detection by rapid, sensitive, accurate, and cost affordable in situ analytical methods from conventional methods to recent molecular approaches for advanced food and microbiology research.

RNA as a stable polymer to build controllable and defined nanostructures for material and biomedical applications

The value of polymers is manifested in their vital use as building blocks in material and life sciences. Ribonucleic acid (RNA) is a polynucleic acid, but its polymeric nature in materials and technological applications is often overlooked due to an impression that RNA is seemingly unstable. Recent findings that certain modifications can make RNA resistant to RNase degradation while retaining its authentic folding property and biological function, and the discovery of ultra-thermostable RNA motifs have adequately addressed the concerns of RNA unstability. RNA can serve as a unique polymeric material to build varieties of nanostructures including nanoparticles, polygons, arrays, bundles, membrane, and microsponges that have potential applications in biomedical and material sciences. Since 2005, more than a thousand publications on RNA nanostructures have been published in diverse fields, indicating a remarkable increase of interest in the emerging field of RNA nanotechnology. In this review, we aim to: delineate the physical and chemical properties of polymers that can be applied to RNA; introduce the unique properties of RNA as a polymer; review the current methods for the construction of RNA nanostructures; describe its applications in material, biomedical and computer sciences; and, discuss the challenges and future prospects in this field.

A versatile-deployable bacterial detection system for food and environmental safety based on LabTube-automated DNA purification, LabReader-integrated amplification, readout and analysis

Contamination of foods is a public health hazard that episodically causes thousands of deaths and sickens millions worldwide. To ensure food safety and quality, rapid, low-cost and easy-to-use detection methods are desirable. Here, the LabSystem is introduced for integrated, automated DNA purification, amplification and detection. It consists of a disposable, centrifugally driven DNA purification platform (LabTube) and a low-cost UV/vis-reader (LabReader). For demonstration of the LabSystem in the context of food safety, purification of Escherichia coli (non-pathogenic E. coli and pathogenic verotoxin-producing E. coli (VTEC)) in water and milk and the product-spoiler Alicyclobacillus acidoterrestris (A. acidoterrestris) in apple juice was integrated and optimized in the LabTube. Inside the LabReader, the purified DNA was amplified, readout and analyzed using both qualitative isothermal loop-mediated DNA amplification (LAMP) and quantitative real-time PCR. For the LAMP-LabSystem, the combined detection limits for purification and amplification of externally lysed VTEC and A. acidoterrestris are 10(2)-10(3) cell-equivalents. In the PCR-LabSystem for E. coli cells, the quantification limit is 10(2) cell-equivalents including LabTube-integrated lysis. The demonstrated LabSystem only requires a laboratory centrifuge (to operate the disposable, fully closed LabTube) and a low-cost LabReader for DNA amplification, readout and analysis. Compared with commercial DNA amplification devices, the LabReader improves sensitivity and specificity by the simultaneous readout of four wavelengths and the continuous readout during temperature cycling. The use of a detachable eluate tube as an interface affords semi-automation of the LabSystem, which does not require specialized training. It reduces the hands-on time from about 50 to 3 min with only two handling steps: sample input and transfer of the detachable detection tube.

Waterborne pathogens: detection methods and challenges

Waterborne pathogens and related diseases are a major public health concern worldwide, not only by the morbidity and mortality that they cause, but by the high cost that represents their prevention and treatment. These diseases are directly related to environmental deterioration and pollution. Despite the continued efforts to maintain water safety, waterborne outbreaks are still reported globally. Proper assessment of pathogens on water and water quality monitoring are key factors for decision-making regarding water distribution systems’ infrastructure, the choice of best water treatment and prevention waterborne outbreaks. Powerful, sensitive and reproducible diagnostic tools are developed to monitor pathogen contamination in water and be able to detect not only cultivable pathogens but also to detect the occurrence of viable but non-culturable microorganisms as well as the presence of pathogens on biofilms. Quantitative microbial risk assessment (QMRA) is a helpful tool to evaluate the scenarios for pathogen contamination that involve surveillance, detection methods, analysis and decision-making. This review aims to present a research outlook on waterborne outbreaks that have occurred in recent years. This review also focuses in the main molecular techniques for detection of waterborne pathogens and the use of QMRA approach to protect public health.

On the track for an efficient detection of Escherichia coli in water: A review on PCR-based methods

Ensuring water safety is an ongoing challenge to public health providers. Assessing the presence of fecal contamination indicators in water is essential to protect public health from diseases caused by waterborne pathogens. For this purpose, the bacteria Escherichia coli has been used as the most reliable indicator of fecal contamination in water. The methods currently in use for monitoring the microbiological safety of water are based on culturing the microorganisms. However, these methods are not the desirable solution to prevent outbreaks as they provide the results with a considerable delay, lacking on specificity and sensitivity. Moreover, viable but non-culturable microorganisms, which may be present as a result of environmental stress or water treatment processes, are not detected by culture-based methods and, thus, may result in false-negative assessments of E. coli in water samples. These limitations may place public health at significant risk, leading to substantial monetary losses in health care and, additionally, in costs related with a reduced productivity in the area affected by the outbreak, and in costs supported by the water quality control departments involved. Molecular methods, particularly polymerase chain reaction-based methods, have been studied as an alternative technology to overcome the current limitations, as they offer the possibility to reduce the assay time, to improve the detection sensitivity and specificity, and to identify multiple targets and pathogens, including new or emerging strains. The variety of techniques and applications available for PCR-based methods has increased considerably and the costs involved have been substantially reduced, which together have contributed to the potential standardization of these techniques. However, they still require further refinement in order to be standardized and applied to the variety of environmental waters and their specific characteristics. The PCR-based methods under development for monitoring the presence of E. coli in water are here discussed. Special emphasis is given to methodologies that avoid pre-enrichment during the water sample preparation process so that the assay time is reduced and the required legislated sensitivity is achieved. The advantages and limitations of these methods are also reviewed, contributing to a more comprehensive overview toward a more conscious research in identifying E. coli in water.

Rapid methods for the detection of foodborne bacterial pathogens: principles, applications, advantages and limitations

The incidence of foodborne diseases has increased over the years and resulted in major public health problem globally. Foodborne pathogens can be found in various foods and it is important to detect foodborne pathogens to provide safe food supply and to prevent foodborne diseases. The conventional methods used to detect foodborne pathogen are time consuming and laborious. Hence, a variety of methods have been developed for rapid detection of foodborne pathogens as it is required in many food analyses. Rapid detection methods can be categorized into nucleic acid-based, biosensor-based and immunological-based methods. This review emphasizes on the principles and application of recent rapid methods for the detection of foodborne bacterial pathogens. Detection methods included are simple polymerase chain reaction (PCR), multiplex PCR, real-time PCR, nucleic acid sequence-based amplification (NASBA), loop-mediated isothermal amplification (LAMP) and oligonucleotide DNA microarray which classified as nucleic acid-based methods; optical, electrochemical and mass-based biosensors which classified as biosensor-based methods; enzyme-linked immunosorbent assay (ELISA) and lateral flow immunoassay which classified as immunological-based methods. In general, rapid detection methods are generally time-efficient, sensitive, specific and labor-saving. The developments of rapid detection methods are vital in prevention and treatment of foodborne diseases.

Rapid methods for the detection of foodborne bacterial pathogens: principles, applications, advantages and limitations

The incidence of foodborne diseases has increased over the years and resulted in major public health problem globally. Foodborne pathogens can be found in various foods and it is important to detect foodborne pathogens to provide safe food supply and to prevent foodborne diseases. The conventional methods used to detect foodborne pathogen are time consuming and laborious. Hence, a variety of methods have been developed for rapid detection of foodborne pathogens as it is required in many food analyses. Rapid detection methods can be categorized into nucleic acid-based, biosensor-based and immunological-based methods. This review emphasizes on the principles and application of recent rapid methods for the detection of foodborne bacterial pathogens. Detection methods included are simple polymerase chain reaction (PCR), multiplex PCR, real-time PCR, nucleic acid sequence-based amplification (NASBA), loop-mediated isothermal amplification (LAMP) and oligonucleotide DNA microarray which classified as nucleic acid-based methods; optical, electrochemical and mass-based biosensors which classified as biosensor-based methods; enzyme-linked immunosorbent assay (ELISA) and lateral flow immunoassay which classified as immunological-based methods. In general, rapid detection methods are generally time-efficient, sensitive, specific and labor-saving. The developments of rapid detection methods are vital in prevention and treatment of foodborne diseases.

Centrifugal LabTube platform for fully automated DNA purification and LAMP amplification based on an integrated, low-cost heating system

This paper introduces a disposable battery-driven heating system for loop-mediated isothermal DNA amplification (LAMP) inside a centrifugally-driven DNA purification platform (LabTube). We demonstrate LabTube-based fully automated DNA purification of as low as 100 cell-equivalents of verotoxin-producing Escherichia coli (VTEC) in water, milk and apple juice in a laboratory centrifuge, followed by integrated and automated LAMP amplification with a reduction of hands-on time from 45 to 1 min. The heating system consists of two parallel SMD thick film resistors and a NTC as heating and temperature sensing elements. They are driven by a 3 V battery and controlled by a microcontroller. The LAMP reagents are stored in the elution chamber and the amplification starts immediately after the eluate is purged into the chamber. The LabTube, including a microcontroller-based heating system, demonstrates contamination-free and automated sample-to-answer nucleic acid testing within a laboratory centrifuge. The heating system can be easily parallelized within one LabTube and it is deployable for a variety of heating and electrical applications.

Isolation and amplification of mRNA within a simple microfluidic lab on a chip

The major modules for realizing molecular biological assays in a micro-total analysis system (μTAS) were developed for the detection of pathogenic organisms. The specific focus was the isolation and amplification of eukaryotic mRNA within a simple, single-channel device for very low RNA concentrations that could then be integrated with detection modules. The hsp70 mRNA from Cryptosporidium parvum was used as a model analyte. Important points of study were surface chemistries within poly(methyl methacrylate) (PMMA) microfluidic channels that enabled specific and sensitive mRNA isolation and amplification reactions for very low mRNA concentrations. Optimal conditions were achieved when the channel surface was carboxylated via UV/ozone treatment followed by the immobilization of polyamidoamine (PAMAM) dendrimers on the surface, thus increasing the immobilization efficiency of the thymidine oligonucleotide, oligo(dT)25, and providing a reliable surface for the amplification reaction, importantly, without the need for blocking agents. Additional chemical modifications of the remaining active surface groups were studied to avoid nonspecific capturing of nucleic acids and hindering of the mRNA amplification at low RNA concentrations. Amplification of the mRNA was accomplished using nucleic acid sequence-based amplification (NASBA), an isothermal, primer-dependent technique. Positive controls consisting of previously generated NASBA amplicons could be diluted 10(15) fold and still result in successful on-chip reamplification. Finally, the successful isolation and amplification of mRNA from as few as 30 C. parvum oocysts was demonstrated directly on-chip and compared to benchtop devices. This is the first proof of successful mRNA isolation and NASBA-based amplification of mRNA within a simple microfluidic device in relevant analytical volumes.

Alternative molecular tests for virological diagnosis

Several nucleic acid amplification techniques (NAATs), particularly PCR and real-time PCR, are currently used in the routine clinical laboratories. Such approaches have allowed rapid diagnosis with a high degree of sensitivity and specificity. However, conventional PCR methods have several intrinsic disadvantages such as the requirement for temperature cycling apparatus, and sophisticated and costly analytical equipments. Therefore, amplification at a constant temperature is an attractive alternative method to avoid these requirements. A new generation of isothermal amplification techniques are gaining a wide popularity as diagnostic tools due to their simple operation, rapid reaction and easy detection. The main isothermal methods reviewed here include loop-mediated isothermal amplification, nucleic acid sequence-based amplification, and helicase-dependent amplification. In this review, design criteria, potential of amplification, and application of these alternative molecular tests will be discussed and compared to conventional NAATs.

Colorimetric and electrochemical genosensors for the detection of Escherichia coli DNA without amplification in seawater

Monitoring seawater, particularly recreational water, for indicator bacteria presence is required to protect the public from exposure to fecal pollution and to guarantee the safety of the swimming areas. Two methods for the detection and quantification of Escherichia coli DNA were developed: a colorimetric assay in a microplate and an electrochemical biosensor. These assays were based on the double hybridization recognition of a single-strand DNA capture probe immobilized onto the microplate or the screen-printed carbon electrode to its complementary ssDNA, which is hybridized with an ssDNA signal probe labeled with horseradish peroxidase enzyme. The hybridization recognition step used the colorimetric monitoring of the oxidation state of the 3,3',5,5'-tetramethylbenzidine. The electrochemical monitoring of the oxidation state of 5 methyl-phenazinium methyl sulfate was allowed when the horseradish-peroxidase was in the presence of the mediator (5 methyl-phenazinium methyl sulfate and hydrogen peroxide). These approaches allow for the detection and quantification of 10(2) to 10(3) cells of E. coli in 5l of seawater samples in less than 5h. Detection was achieved without a nucleic acid amplification step. The specificity of the two methods against E. coli was demonstrated by testing a panel of bacteria. The two methods can be used for on-site monitoring of seawater quality.

Micro-fluidic chip platform for the characterization of breast cancer cells using aptamer-assisted immunohistochemistry

We demonstrated a new QIHC (Quantitative Immunohistochemistry) microfluidic PDMS (Polydimethylsiloxane) platform by the introduction of the aptamer specific to the Fc region of the IgG antibody as a reporting probe. The aptamer was designed and synthesized. Various breast cancer cell lines were prepared as paraffin block slides, which were covered by a microfluidic PDMS platform to form a micro-reaction chamber. Primary antibodies specific to marker proteins (HER2, ER, PR, and ki-67) for breast cancer characterization were loaded in the micro-fluidic chip prior to the introduction of the aptamer. A master mixture of QNASBA (Quantitative Nucleic Acid Sequence Based Amplification) was used to quantify marker proteins by real time amplification of the aptamers. The quantitative results of aptamer amplification were linearly proportional to the concentrations of 4 different primary antibodies. The characterization results of the aptamer-assisted IHC using the microfluidic platform were well-correlated with those of conventional IHC for breast cancer cell lines (SK-BR-3, MCF-7, MDA-MB-231). Objective quantitative evaluations were carried out and compared with conventional results for real clinical samples.

Pyrosequencing on templates generated by asymmetric nucleic acid sequence-based amplification (asymmetric-NASBA)

Pyrosequencing is an ideal tool for verifying the sequence of amplicons. To enable pyrosequencing on amplicons from nucleic acid sequence-based amplification (NASBA), asymmetric NASBA with unequal concentrations of T7 promoter primer and reverse transcription primer was proposed. By optimizing the ratio of two primers and the concentration of dNTPs and NTPs, the amount of single-stranded cDNA in the amplicons from asymmetric NASBA was found increased 12 times more than the conventional NASBA through the real-time detection of a molecular beacon specific to cDNA of interest. More than 20 bases have been successfully detected by pyrosequencing on amplicons from asymmetric NASBA using Human parainfluenza virus (HPIV) as an amplification template. The primary results indicate that the combination of NASBA with a pyrosequencing system is practical, and should open a new field in clinical diagnosis.

Rapid concentration and molecular enrichment approach for sensitive detection of Escherichia coli and Shigella species in potable water samples

In this work, we used a rapid, simple, and efficient concentration-and-recovery procedure combined with a DNA enrichment method (dubbed CRENAME [concentration and recovery of microbial particles, extraction of nucleic acids, and molecular enrichment]), that we coupled to an Escherichia coli/Shigella-specific real-time PCR (rtPCR) assay targeting the tuf gene, to sensitively detect E. coli/Shigella in water. This integrated method was compared to U.S. Environmental Protection Agency (EPA) culture-based Method 1604 on MI agar in terms of analytical specificity, ubiquity, detection limit, and rapidity. None of the 179 non-E. coli/Shigella strains tested was detected by both methods, with the exception of Escherichia fergusonii, which was detected by the CRENAME procedure combined with the E. coli/Shigella-specific rtPCR assay (CRENAME + E. coli rtPCR). DNA from all 90 E. coli/Shigella strains tested was amplified by the CRENAME + E. coli rtPCR, whereas the MI agar method had limited ubiquity and detected only 65 (72.2%) of the 90 strains tested. In less than 5 h, the CRENAME + E. coli rtPCR method detected 1.8 E. coli/Shigella CFU whereas the MI agar method detected 1.2 CFU/100 ml of water in 24 h (95% confidence). Consequently, the CRENAME method provides an easy and efficient approach to detect as little as one Gram-negative E. coli/Shigella cell present in a 100-ml potable water sample. Coupled with an E. coli/Shigella-specific rtPCR assay, the entire molecular procedure is comparable to U.S. EPA Method 1604 on MI agar in terms of analytical specificity and detection limit but provides significant advantages in terms of speed and ubiquity.

Miniaturized isothermal nucleic acid amplification, a review

Micro-Total Analysis Systems (µTAS) for use in on-site rapid detection of DNA or RNA are increasingly being developed. Here, amplification of the target sequence is key to increasing sensitivity, enabling single-cell and few-copy nucleic acid detection. The several advantages to miniaturizing amplification reactions and coupling them with sample preparation and detection on the same chip are well known and include fewer manual steps, preventing contamination, and significantly reducing the volume of expensive reagents. To-date, the majority of miniaturized systems for nucleic acid analysis have used the polymerase chain reaction (PCR) for amplification and those systems are covered in previous reviews. This review provides a thorough overview of miniaturized analysis systems using alternatives to PCR, specifically isothermal amplification reactions. With no need for thermal cycling, isothermal microsystems can be designed to be simple and low-energy consuming and therefore may outperform PCR in portable, battery-operated detection systems in the future. The main isothermal methods as miniaturized systems reviewed here include nucleic acid sequence-based amplification (NASBA), loop-mediated isothermal amplification (LAMP), helicase-dependent amplification (HDA), rolling circle amplification (RCA), and strand displacement amplification (SDA). Also, important design criteria for the miniaturized devices are discussed. Finally, the potential of miniaturization of some new isothermal methods such as the exponential amplification reaction (EXPAR), isothermal and chimeric primer-initiated amplification of nucleic acids (ICANs), signal-mediated amplification of RNA technology (SMART) and others is presented.

A DNA sequence-specific electrochemical biosensor based on alginic acid-coated cobalt magnetic beads for the detection of E. coli

A new type of DNA sequence-specific electrochemical biosensor based on magnetic beads for the detection of Escherichia coli is reported in the present work. Alginic acid-coated cobalt magnetic beads, capped with 5'-(NH(2)) oligonucleotide and employed not only for magnetic separation but also as the solid adsorbent, were used as DNA probes to hybridize with the target E. coli DNA sequence. This assay was specific for E. coli detection depending on the uid A gene, which encodes for the enzyme β-d-glucuronidase produced by E. coli strains. When daunomycin (DNR) was used as DNA hybridization indicator, the target sequences of E. coli hybridized with the probes resulted in the decrease of DNR reduction peak current, which was proportional to the E. coli concentration. The optimization of the hybridization detection was carried out and the specificity of the probes was also demonstrated. This DNA biosensor can be employed to detect a complementary target sequence for 3.0×10(-10) mol/L and denatured PCR products for 0.5 ng/μL. The linear range of the developed biosensor for the detection of E. coli cells was from 1.0×10(2) to 2.0×10(3) cells/mL with a detection limit of 50 cells/mL. After a brief enrichment process, a concentration of 10 cells/mL E. coli in real water samples was detected by the electrochemical biosensor.

Nucleic acids as viability markers for bacteria detection using molecular tools

A large set of nucleic acid detection methods with good sensitivity and specificity are now available for the detection of pathogens in clinical, food and environmental samples. Given increasing demand, many efforts have been made to combine these methods to assess viability. Genomic DNA PCR amplification has been shown to be inappropriate for distinguishing viable from dead bacteria owing to DNA stability. Many authors have tried to bypass this difficulty by switching to RNA amplification methods such as reverse transcription-PCR and nucleic acid sequence-based amplification. More recently, researchers have developed methods combining specific sample pretreatment with nucleic acid detection methods, notably ethidium or propidium monoazide pretreatment coupled with PCR DNA detection or direct viable count methods and subsequent fluorescent in situ hybridization of 16S rRNA. This review evaluates the performance of these different methods for viability assessment.

Development of an electrochemical immunoassay for rapid detection of E. coli using anodic stripping voltammetry based on Cu@Au nanoparticles as antibody labels

A sensitive electrochemical immunoassay for rapid detection of Escherichia coli has been developed by anodic stripping voltammetry (ASV) based on core-shell Cu@Au nanoparticles (NPs) as anti-E. coli antibody labels. The characteristics of Cu@Au NPs before and after binding with antibody were confirmed by transmission electron microscopy (TEM). After Cu@Au-labeled antibody reacted with the immobilized E. coli on Polystyrene (PS)-modified ITO chip, Cu@Au NPs were dissolved by oxidation to the metal ionic forms, and the released Cu(2+) ions were determined at GC/Nafion/Hg modified electrode by ASV. The utilization of GC/Nafion/Hg modified electrode could enhance the sensitivity for Cu(2+) detection with a concentration as low as 9.0 x 10(-12)mol/L. Since Cu@Au NPs labels were only present when antibody reacted with E. coli, the amount of Cu(2+) directly reflected the number of E. coli. The technique could detect E. coli with a detection limit of 30CFU/mL and the overall analysis could be completed in 2h. By introducing a pre-enrichment step, a concentration of 3CFU/10mL E. coli in surface water was detected by the electrochemical immunoassay.

Influence of long time storage in mineral water on RNA stability of Pseudomonas aeruginosa and Escherichia coli after heat inactivation

Background

Research of RNA viability markers was previously studied for many bacterial species. Few and different targets of each species have been checked and motley results can be found in literature. No research has been done about Pseudomonas aeruginosa in this way.

Methodology/Principal Findings

Disappearance of 48 transcripts was analyzed by two-steps reverse transcription and real time polymerase chain reaction (RT-PCR) after heat-killing of Pseudomonas aeruginosa previously stored in mineral water or not. Differential results were obtained for each target. 16S rRNA, 23S rRNA, groEL, and rpmE were showed as the most persistent transcripts and rplP, rplV, rplE and rpsD were showed as the most labile transcripts after P. aeruginosa death. However, the labile targets appeared more persistent in bacteria previously stored in mineral water than freshly cultivated (non stored). These nine transcripts were also analyzed in Escherichia coli after heat-killing and different to opposite results were obtained, notably for groEL which was the most labile transcript of E. coli. Moreover, opposite results were obtained between mineral water stored and freshly cultivated E. coli.

Conclusions and Significance

This study highlights four potential viability markers for P. aeruginosa and four highly persistent transcripts. In a near future, these targets could be associated to develop an efficient viability kit. The present study also suggests that it would be difficult to determine universal RNA viability markers for environmental bacteria, since opposite results were obtained depending on the bacterial species and the physiological conditions.

An antibody microarray, in multiwell plate format, for multiplex screening of foodborne pathogenic bacteria and biomolecules

Intoxication and infection caused by foodborne pathogens are important problems worldwide, and screening tests for multiple pathogens are needed because foods may be contaminated with multiple pathogens and/or toxic metabolites. We developed a 96-well microplate, multiplex antibody microarray method to simultaneously capture and detect Escherichia coli O157:H7 and Salmonella enterica serovar Typhimurium (S. typhimurium), as well as a biomolecule (chicken immunoglobulin G or IgG employed as a proteinaceous toxin analog) in a single sample. Microarrayed spots of capture antibodies against the targeted analytes were printed within individual wells of streptavidin-coated polystyrene 96-multiwell microtiter plates and a sandwich assay with fluorescein- or Cy3-labeled reporter antibodies was used for detection. (Printing was achieved with a conventional microarray printing robot that was operated with custom-developed microplate arraying software.) Detection of the IgG was realized from ca. 5 to 25 ng/mL, and detection of E. coli O157:H7 and S. typhimurium was realized from ca. 10(6) to 10(9) and ca. 10(7) to 10(9) cells/mL, respectively. Multiplex detection of the two bacteria and the IgG in buffer and in culture-enriched ground beef filtrate was established with a total assay (including detection) time of ca. 2.5 h. Detection of S. typhimurium was largely unaffected by high concentrations of the other bacteria and IgG as well as the ground beef filtrate, whereas a small decrease in response was observed for E. coli O157:H7. The multiwell plate, multiplex antibody microarray platform developed here demonstrates a powerful approach for high-throughput screening of large numbers of food samples for multiple pathogens and toxins.

Detection of Vibrio cholerae by real-time nucleic acid sequence-based amplification

A multitarget molecular beacon-based real-time nucleic acid sequence-based amplification (NASBA) assay for the specific detection of Vibrio cholerae has been developed. The genes encoding the cholera toxin (ctxA), the toxin-coregulated pilus (tcpA; colonization factor), the ctxA toxin regulator (toxR), hemolysin (hlyA), and the 60-kDa chaperonin product (groEL) were selected as target sequences for detection. The beacons for the five different genetic targets were evaluated by serial dilution of RNA from V. cholerae cells. RNase treatment of the nucleic acids eliminated all NASBA, whereas DNase treatment had no effect, showing that RNA and not DNA was amplified. The specificity of the assay was investigated by testing several isolates of V. cholerae, other Vibrio species, and Bacillus cereus, Salmonella enterica, and Escherichia coli strains. The toxR, groEL, and hlyA beacons identified all V. cholerae isolates, whereas the ctxA and tcpA beacons identified the O1 toxigenic clinical isolates. The NASBA assay detected V. cholerae at 50 CFU/ml by using the general marker groEL and tcpA that specifically indicates toxigenic strains. A correlation between cell viability and NASBA was demonstrated for the ctxA, toxR, and hlyA targets. RNA isolated from different environmental water samples spiked with V. cholerae was specifically detected by NASBA. These results indicate that NASBA can be used in the rapid detection of V. cholerae from various environmental water samples. This method has a strong potential for detecting toxigenic strains by using the tcpA and ctxA markers. The entire assay including RNA extraction and NASBA was completed within 3 h.

A molecular beacon-based real time NASBA assay for detection of Listeria monocytogenes in food products: role of target mRNA secondary structure on NASBA design

A molecular beacon-based real-time NASBA (QNASBA) assay for detection and identification of Listeria monocytogenes has been developed. A correlation between targeting highly accessible mRNA sequences and QNASBA efficiency and sensitivity was demonstrated. The assay targets a sequence from the mRNA transcript of the hly gene which is specific for this bacterium; and includes an internal amplification control to disclose failure of the reaction. It was fully selective and consistently detected down to 100 target molecules and 40 L. monocytogenes exponentially growing cells per reaction. In addition, it was capable of accurate quantification of target RNA molecules independently of the presence of DNA in the sample. In combination with a short RNase treatment prior to nucleic acids extraction our QNASBA specifically detected viable L. monocytogenes cells. It was successfully applied to rapid detection of this pathogen in meat and salmon products, and is therefore a useful tool for the study of L. monocytogenes in food samples. We finally discuss considerations of target secondary structure with regard to development of NASBA assays.

Recent developments in bio-molecular electronics techniques for food pathogens

Food borne illnesses contribute to the majority of infections caused by pathogenic microorganisms. Detection of these pathogens originating from different sources has led to increased interest of researchers. New bio-molecular techniques for food pathogen detection are being developed to improve the sensor characteristics such as sensitivity, reusability, simplicity and economic viability. Present article deals with the various methods of food pathogen detection with special emphasis on bio-molecular electronics techniques such as biosensors, microarrays, electronic nose, and nano-materials based methods.