Hydrotreating of Atmospheric Gas Oil and Co-Processing with Rapeseed Oil Using Sulfur-Free PMoCx/Al2O3 Catalysts

Sulfur-free molybdenum carbides have the potential to replace the conventional sulfided catalysts used for hydrotreating. For these catalysts, it is not necessary to add sulfur to maintain their activity. This fact makes it worthwhile to continue working on improving their hydrotreating efficiency. According to our previous studies, the addition of Co or Ni promotes the hydrotreating activity, but only significant in the case of hydrodesulfurization efficiency (up to 30%). To increase the hydrodenitrogenation efficiency, other promoters, such as phosphorus, can be added. However, most of the published studies do not focus on co-processing or only on hydrotreating of gas oil model molecules at a laboratory scale. In this paper, we build on our previous research by studying five sulfur-free phosphorus-modified MoCx/Al₂O₃ catalysts (0.5, 1.5, 2.5, 3.5, and 4.5 wt %) for the hydrotreating of atmospheric gas oil and co-processing with rapeseed oil (5, 10, and 25 wt %) under industrial conditions (330-350 °C, 5.5 MPa, WHSV 1-2 h^-1). A phosphorus content up to 1.5 wt % promoted the hydrodesulfurization (5-10%) and the hydrodenitrogenation (10-25%) efficiencies of catalysts. Moreover, the triglycerides addition did not significantly decrease the catalyst activity during co-processing. Therefore, our results enable us to define the range of phosphorus addition that enhances MoCx activity using industrial conditions and commercial feedstocks, pointing the way to develop a suitable and sulfur-free alternative to conventional hydrotreating catalysts.

Efficient depolymerization of lignins to alkylphenols using phosphided NiMo catalysts

A series of phosphided NiMo catalysts on different supports was tested for the catalytic hydrotreatment of lignins to biobased building blocks like alkylphenols.

Operando QEXAFS studies of Ni₂P during thiophene hydrodesulfurization: direct observation of Ni-S bond formation under reaction conditions

Structural changes in Ni(2)P/MCM-41 were followed by quick extended X-ray absorption fine structure (QEXAFS) and were directly related to changes in X-ray absorption near-edge structure (XANES) which had been used earlier for the study of the active catalyst phase. An equation is proposed to correct the transient QEXAFS spectra up to second-order in time to remove spectral distortions induced by structural changes occurring during measurements. A good correlation between the corrected QEXAFS and the XANES spectral changes was found, giving support to the conclusions derived from the XANES in the previous work, namely that the formation of a Ni-S bond in a surface NiPS phase is involved in the active site for the hydrodesulfurization reaction.