Effects of atomic-level nano-structured hydroxyapatite on adsorption of bone morphogenetic protein-7 and its derived peptide by computer simulation

Hydroxyapatite (HA) is the principal inorganic component of bones and teeth and has been widely used as a bone repair material because of its good biocompatibility and bioactivity. Understanding the interactions between proteins and HA is crucial for designing biomaterials for bone regeneration. In this study, we evaluated the effects of atomic-level nano-structured HA (110) surfaces on the adsorption of bone morphogenetic protein-7 (BMP-7) and its derived peptide (KQLNALSVLYFDD) using molecular dynamics and density functional theory methods. The results indicated that the atomic-level morphology of HA significantly affected the interaction strength between proteins and HA substrates. The interactions of BMP-7 and its derived peptide with nano-concave and nano-pillar HA surfaces were stronger than those with flat or nano-groove HA surfaces. The results also revealed that if the groove size of nano-structured HA surfaces matched that of residues in the protein or peptide, these residues were likely to spread into the grooves of the nano-groove, nano-concave, and nano-pillar HA, further strengthening the interactions. These results are helpful in better understanding the adsorption behaviors of proteins onto nano-structured HA surfaces, and provide theoretical guidance for designing novel bioceramic materials for bone regeneration and tissue engineering.

Charge specific protein placement at submicrometer and nanometer scale by direct modification of surface potential by electron beam

The understanding and the precise control of protein adsorption is extremely important for the development and optimization of biomaterials. The challenge resides in controlling the different surface properties, such as surface chemistry, roughness, wettability, or surface charge, independently, as modification of one property generally affects the other. We demonstrate the creation of electrically modified patterns on hydroxyapatite by using scanning electron beam to tailor the spatial regulation of protein adsorption via electrostatic interactions without affecting other surface properties of the material. We show that domains, presenting modulated surface potential, can be created to precisely promote or reduce protein adsorption.

Adsorption mechanism of BMP-7 on hydroxyapatite (001) surfaces

Many properties and functions of bone-related proteins perform through the interface with the hydroxyapatite. However, the mechanism of difference of proteins adsorbing behaviors caused by the variation of calcium and phosphate ions on hydroxyapatite is still unclear at atomic level. In this work, we investigated the site-selective adhesion and the adsorption mechanism of protein BMP-7 to the hydroxyapatite surfaces in aqueous media during adsorption and desorption processes. Molecular dynamics (MD) and steered molecular dynamics (SMD) simulations combined with trajectory analysis were employed to give insight into the underlying behaviors of BMP-7 binding. The results suggest that the adsorption sites could be divided into two categories: COO(-) and NH(2)/NH3+. For COO(-), the adsorption phenomenon is driven by the electrostatic interaction formed between the negative charged carboxylate groups and the Ca1 cations on the hydroxyapatite surface. While for NH(2)/NH3+, the interaction is through the intermolecular H-bonds between the N-containing groups and the phosphate on the hydroxyapatite surface.

'Magic bullets' for bone diseases: progress in rational design of bone-seeking medicinal agents

An ideal therapeutic agent for bone diseases should act solely on bone tissue with no pharmacological activity at other anatomical sites. Current therapeutic agents, however, do not usually display a preferential affinity to bones and non-specifically distribute throughout the body after administration. Attempts to design bone-specific agents have relied on engineering a desired therapeutic agent with bone-seeking molecules so that the latter delivers the therapeutic agents specifically to bones. In this critical review, we summarize the latest attempts to engineer bone-seeking therapeutic agents based on formulating therapeutic agents with bisphosphonates, a class of compounds with high affinity to biological apatite. We first provide a relevant summary of the structure of bone mineral and bisphosphonates, highlighting the mode of interaction between these two entities. The use of bisphosphonates in the diagnosis of bone diseases is then presented, since this application helps us to understand the bone-carrier properties of bisphosphonates under physiological conditions. A summary of recent attempts to formulate bisphosphonates with traditional therapeutic agents to restrict their activities to bone tissues is then provided, with special emphasis on the structure-function relationships of the engineered compounds. Finally, attempts to use bisphosphonates to deliver macromolecular therapeutics (i.e., proteins) are summarized, based on recent data from the authors' lab. The collective research into bone-seeking medicinal agents is progressively laying the foundation for next-generation 'magic bullets' that display desirable activities at the disease sites with no undesirable activity on other organ systems. (164 references.).

Adsorption of citric acid from dilute aqueous solutions by hydroxyapatite

The role of citric acid in the demineralization of dental enamel, which is mainly constituted by hydroxyapatite, is important for periodontal regeneration and in the conditioning of enamel or dentin for bonding restorative resins. The adsorption of citric acid from aqueous solutions onto synthetic hydroxyapatite at 278, 288, 298, and 308 K and pH 4.8 has been studied by means of UV spectroscopy. The adsorption reaction, which takes place by an interaction between phosphate groups and citrate anions at the solid-solution interface, yields an adsorbate-adsorbent complex of high stability. The adsorption isotherms fit the Langmuirian shape. The proposed adsorption model, where citrate species interact in a bidentate manner (one citrate ion links two phosphate sites), is coherent with the experimental data. The activation standard heat and activation standard entropy were calculated. All the thermodynamic and kinetic parameters were in concordance with the adsorption reaction proposed in this work.

Adsorption of immunogamma globulin onto various synthetic calcium hydroxyapatite particles

This paper presents data on adsorption of immunogamma globulin (IgG) onto synthetic rodlike calcium hydroxyapatite particles (CaHaps) with various particle lengths and calcium/phosphate (Ca/P) atomic ratios ranging from 1.54 to 1.65 and compares the obtained results to those of acidic (bovine serum albumin, BSA), neutral (myoglobin, MGB), and basic (lysozyme, LSZ) proteins reported before. The effect of electrolyte concentration on IgG adsorption was also examined. The initial rate of IgG adsorption was similar to that of BSA and was slower than that of MGB and LSZ. This fact was interpreted by the difference in the structural stability and molecular weight of these proteins. The isotherms of IgG adsorption onto the CaHap particles were of pseudo-Langmuir type. The saturated amount of adsorbed IgG values (nsIgG) for the particles with mean particle length less than 70 nm decreased with increasing Ca/P ratio. The adsorption behavior of IgG molecules was very similar to that of basic LSZ, though IgG has zero net charge. The nsIgG value was increased with increased mean particle length of CaHaps; the relationship was less significant than that for BSA but similar to those for MGB and LSZ. The similar adsorption behavior of IgG and LSZ suggested that the Fab parts of IgG molecules preferentially adsorb onto CaHap to provide the reversed Y-shaped conformation of IgG. The change of the adsorption mode of IgG molecules from the reversed Y-shaped conformation to side-on by "spreading" the Fc part of IgG molecules onto the particle surface over a longer adsorption time was suggested. The nsIgG value was increased with increasing electrolyte concentration by screening the intra- and intermolecular electrostatic interactions of proteins.

Effects of Acetonitrile on Adsorption Behavior of Bovine Serum Albumin onto Synthetic Calcium Hydroxyapatite Particles

The objective of this study was to examine the effects of acetonitrile (AN) on the adsorption behavior of bovine serum albumin (BSA) onto calcium hydroxyapatite [Ca10(PO4)6(OH)2 Ca10, Hap] materials by combining the ultraviolet (UV) and circular dichroism (CD) measurements of BSA solution. The structural change of BSA molecules with addition of AN was investigated by UV and CD spectroscopy measurements prior to studying adsorption behavior of BSA onto Hap. The CD spectra revealed that the fraction of alpha-helical content of BSA is remarkably decreased at AN concentrations above 30 vol.%, while beta-sheet content is increased. On the other hand, the percentages of random coil and turn contents were decreased only slightly. In addition to this secondary structural change of BSA, the UV spectra suggested that the tertiary structure of protein molecules was also changed by the addition of large amounts of AN; BSA molecules associate to form molecular aggregates at [AN]> or =40 vol.%. From the adsorption of BSA onto Hap particles (ca. 30 nm in the particle length) from a water-AN mixed solution, it was revealed that the adsorption behavior of BSA strongly depends on the change of secondary and tertiary structures of BSA by addition of AN. The contraction of BSA molecules at low AN concentrations (10-20 vol.%) gave their small cross-sectional area, providing a large amount of adsorption (n(BSA)), although n(BSA) was decreased above 30 vol.% AN by enlargement of BSA molecules with solvation and unfolding some alpha-helix domains. The n(BSA) values of the systems with AN exhibited a maximum; n(BSA) was increased at a lower BSA concentration region, although it was decreased at a higher BSA concentration due to self-association. Accompanying the change of n(BSA) with AN addition, the maxima of electrophoretic mobility (em) of the Hap particles were observed for the systems with AN, although the em of Hap particles was normally increased and saturated with increase in protein coverage for the native structure on the system without AN. On the other hand, because the aggregated BSA molecules could be cooperatively bound, the adsorption of BSA onto the Hap particles with large size (108 nm in the particle length) was enhanced in the presence of AN.

Adsorption of Bovine Serum Albumin and Lysozyme on Hydrophobic Calcium Hydroxyapatites

The adsorption of bovine serum albumin (BSA) and lysozyme (LSZ) to oleyl phosphate(OP)-grafted calcium hydroxyapatite (OP-CaHAP) with different degrees of hydrophobicity, ranging the number of surface oleyl group per unit nm2 (nO) from 0 to 2.60, was investigated. The pronounced effects of the hydrophobic moiety of adsorbent on protein adsorption were observed. The saturated amount of adsorbed BSA (ns) was increased up to nO = 0.6 by an enlargement of hydrophobic interaction between hydrophobic CaHAP particle and proteins. However, ns decreased at nO >/= 1.3 by increasing the electrostatic repulsive force between negatively charged BSA and OP-CaHAP particles. On the other hand, the ns value of LSZ was continuously increased up to nO = 2.0 and saturated by increasing either the hydrophobic interaction or the electrostatic attraction of positively charged LSZ and negatively charged OP-grafted CaHAPs. The BSA adsorption experiment revealed that the effect of positively charged adsorption sites on the exposed ac or bc crystal faces (C-sites) of the CaHAPs is screened by the OP-groups grafted on their particle surfaces. Copyright 1999 Academic Press.

Adsorption of human lysozyme onto hydroxyapatite. Identification of its adsorbing site using site-directed mutagenesis

To elucidate hydroxyapatite-protein interaction, mutant human lysozymes in which the surface charge was modified by site-directed mutagenesis were used. Five mutant human lysozymes (K1A, K13A, K33A, R10A, R14A) were expressed in yeast. The chromatographic behavior of these lysozymes was studied with a HPLC hydroxyapatite column. Elution molarities of K1A and R14A mutants were greatly lowered. While Lys-13 and Arg-10 are located around Lys-1 and Arg-14, K13A and R10A mutants bound onto hydroxyapatite stronger than K1A and R14A mutants. In combination with an X-ray crystal structure of human lysozyme, it is concluded that the adsorbing site of human lysozyme is at the back of the active site and that Arg-14, Lys-1, Arg-10 and Lys-13 play important roles in binding.