Aqueous Suspensions of Fumed Silica and Adsorption of Proteins

Bioinspired versus Enzymatic Oxidation of Some Homologous Thionine Dyes in the Presence of Immobilized Metalloporphyrin Catalysts and Ligninolytic Enzymes

Thionines are recalcitrant and polluting textile dyes presenting various degrees of N-methylation. In this paper, a complete series of homologous thionines was used as the substrates for oxidation in the presence of a bioinspired commercial iron-porphyrin immobilized on to imidazole- and pyridine-functionalized fumed silica, to emulate the active site of ligninolytic peroxidases. The obtained catalytic adducts showed a remarkable ability to catalyze thionine dye oxidation in the presence of different oxidants such as potassium monopersulfate and hydrogen peroxide. Different oxidation patterns were obtained and mechanistically discussed, in comparison with those observed in the presence of some ligninolytic oxidizing enzymes.

Inorganic materials as supports for covalent enzyme immobilization: methods and mechanisms

Several inorganic materials are potentially suitable for enzymatic covalent immobilization, by means of several different techniques. Such materials must meet stringent criteria to be suitable as solid matrices: complete insolubility in water, reasonable mechanical strength and chemical resistance under the operational conditions, the capability to form manageable particles with high surface area, reactivity towards derivatizing/functionalizing agents. Non-specific protein adsorption should be always considered when planning covalent immobilization on inorganic solids. A huge mass of experimental work has shown that silica, silicates, borosilicates and aluminosilicates, alumina, titania, and other oxides, are the materials of choice when attempting enzyme immobilizations on inorganic supports. More recently, some forms of elemental carbon, silicon, and certain metals have been also proposed for certain applications. With regard to the derivatization/functionalization techniques, the use of organosilanes through silanization is undoubtedly the most studied and the most applied, although inorganic bridge formation and acylation with selected acyl halides have been deeply studied. In the present article, the most common inorganic supports for covalent immobilization of the enzymes are reviewed, with particular focus on their advantages and disadvantages in terms of enzyme loadings, operational stability, undesired adsorption, and costs. Mechanisms and methods for covalent immobilization are also discussed, focusing on the most widespread activating approaches (such as glutaraldehyde, cyanogen bromide, divinylsulfone, carbodiimides, carbonyldiimidazole, sulfonyl chlorides, chlorocarbonates, N-hydroxysuccinimides).

TSDC spectroscopy of relaxational and interfacial phenomena

Applications of thermally stimulated depolarisation current (TSDC) technique to a variety of systems with different dispersion phases such as disperse and porous metal oxides, polymers, liquid crystals, amorphous and crystalline solids, composites, solid solutions, biomacromolecules, cells, tissues, etc. in gaseous or liquid dispersion media are analysed. The effects of dipolar, direct current (dc) and space charge relaxations are linked to the temperature dependent mobility of molecules, their fragments, protons, anions, and electrons and depend on thermal treatment, temperature and field intensity of polarisation, heating rate on depolarisation or cooling rate on polarisation. Features of the relaxation mechanisms are affected not only by the mentioned factors but also by morphological, structural and chemical characteristics of materials. The interfacial phenomena, especially the role of interfacial water, received significant attention on analysis of the TSDC data. Comparison of the data of TSDC and dielectric relaxation spectroscopy (DRS), differential scanning calorimetry (DSC), 1H NMR spectroscopy with layer-by-layer freezing-out of bulk and interfacial water, adsorption/desorption of nitrogen, water and dissolved organics demonstrates high sensitivity and information content of the TSDC technique, allowing a deeper understanding of interfacial phenomena.

Integral equation for calculation of distribution function of activation energy of shear viscosity

A new technique of calculation of a distribution function of activation energy (f(E)) of shear viscosity based on a regularization procedure applied to the Fredholm integral equation of the first kind has been developed using the Baxter-Drayton and Brady model for concentrated and flocculated suspensions. This technique has been applied to the rheological data obtained at different shear rates for aqueous suspensions with fumed silica A-300 and low-molecular (3,4,5-trihydroxybenzoic acid and 1,5-dioxynaphthalene) or high-molecular (poly(vinyl pyrrolidone) of 12.7 kDa and ossein of 20-29 kDa) compounds over a wide concentration range (up to 25 wt% of both components) and at different temperatures. Monomodal f(E) distributions are observed for the suspensions with individual A-300 or A-300 with a low amount of adsorbed organics. In the case of larger amounts of nanosilica and organics the f(E) distributions are multimodal because of stronger structurization and coagulation of the systems that require a high energy to break the coagulation structures resisting to the shear flow.

Adsorption of organic molecules on silica surface

The adsorption behaviour of various organic adsorbates on silica surface is reviewed. Most of the structural information on silica is obtained from IR spectral data and from the characteristics of water present at the silica surface. Silica surface is generally embedded with hydroxy groups and ethereal linkages, and hence considered to have a negative charged surface prone to adsorption of electron deficient species. Adsorption isotherms of the adsorbates delineate the nature of binding of the adsorbate with silica. Aromatic compounds are found to involve the pi-cloud in hydrogen bonding with silanol OH group during adsorption. Cationic and nonionic surfactants adsorb on silica surface involving hydrogen bonding. Sometimes, a polar part of the surfactants also contributes to the adsorption process. Styryl pyridinium dyes are found to anchor on silica surface in flat-on position. On modification of the silica by treating with alkali, the adsorption behaviour of cationic surfactant or polyethylene glycol changes due to change in the characteristics of silica or modified silica surface. In case of PEG-modified silica, adsolubilization of the adsorbate is observed. By using a modified adsorption equation, hemimicellization is proposed for these dyes. Adsorptions of some natural macromolecules like proteins and nucleic acids are investigated to study the hydrophobic and hydrophilic binding sites of silica. Artificial macromolecules like synthetic polymers are found to be adsorbed on silica surface due to the interaction of the multifunctional groups of the polymers with silanols. Preferential adsorption of polar adsorbates is observed in case of adsorbate mixtures. When surfactant mixtures are considered to study competitive adsorption on silica surface, critical micelle concentration of individual surfactant also contributes to the adsorption isotherm. The structural study of adsorbed surface and the thermodynamics of adsorption are given some importance in this review.

Adsorption of egg albumin onto methylated yeast biomass

A new biosorbent, methylated yeast (MeYE), was prepared for the adsorptive separation of proteins from aqueous solutions. Yeast was methylated in a 0.1 M HCl methyl alcohol solution at room temperature. About 80% of the carboxylic groups of yeast could be methylated within 9 h. The adsorption of egg albumin onto MeYE was studied to evaluate the protein adsorption ability of MeYE. At near neutral pH, egg albumin was scarcely adsorbed onto unmethylated yeast and the adsorbed amount of egg albumin increased with increasing methylation degree. The amount of egg albumin adsorbed onto MeYE increased with increasing pH from 4 to 7 and steeply decreased above pH 7. The Langmuir isotherm was applied to determine the apparent adsorption constant and the saturated adsorbed amount of egg albumin on MeYE. Both the apparent adsorption constant and the saturated adsorbed amount increased with the degree of methylation. The saturated adsorbed amount of egg albumin onto MeYE having methylation degree 77% was 8.41 x 10(-6) mol g(-1) or 0.378 gg(-1) at near neutral pH.

Photon correlation spectroscopy investigations of proteins

Physical principles of photon correlation spectroscopy (PCS), mathematical treatment of the PCS data (converting autocorrelation functions to distribution functions or average characteristics), and PCS applications to study proteins and other biomacromolecules in aqueous media are described and analysed. The PCS investigations of conformational changes in protein molecules, their aggregation itself or in consequence of interaction with other molecules or organic (polymers) and inorganic (e.g. fumed silica) fine particles as well as the influence of low molecular compounds (surfactants, drugs, salts, metal ions, etc.) reveal unique capability of the PCS techniques for elucidation of important native functions of proteins and other biomacromolecules (DNA, RNA, etc.) or microorganisms (Escherichia coli, Pseudomonas putida, Dunaliella viridis, etc.). Special attention is paid to the interaction of proteins with fumed oxides and the impact of polymers and fine oxide particles on the motion of living flagellar microorganisms analysed by means of PCS.

Study of interaction of proteins with fumed silica in aqueous suspensions by adsorption and photon correlation spectroscopy methods

The interaction of fumed silica A-300 (S(BET) = 297 m2 g(-1)) with bovine serum albumin (prepared by different methods), ovalbumin, human hemoglobin, and gelatin as a function of pH, salinity, and concentrations of components in aqueous medium was studied by adsorption and photon correlation spectroscopy (PCS) methods. Comparison of equilibrium (incubation time t(i) approximately 1 h) adsorption of proteins on A-300, minute (t(i) approximately 1 min) flocculation rate, and the particle size distributions measured by the PCS method shows different rearrangement of particle swarms depending on pH, salinity, and concentration of proteins, especially at pH close to IEP of silica or proteins. The electrokinetic mobility of protein/silica swarms is greater than that of individual components at pH far from the IEP of proteins. Changes in the Gibbs free energy (DeltaG) on protein adsorption depend on pH (-DeltaG is minimal at pH 2, close to the IEP of silica, and maximal at pH between the IEP of protein and silica), concentration (-DeltaG is maximal at C(p) between 1 and 6 mg/ml), type of proteins, and their preparation technique.

Characterization of Fumed Alumina/Silica/Titania in the Gas Phase and in Aqueous Suspension

Fumed oxide alumina/silica/titania was studied in comparison with fumed alumina, silica, titania, alumina/silica, and titania/silica by means of XRD, (1)H NMR, IR, optical, dielectric relaxation, and photon correlation spectroscopies, electrophoresis, and quantum chemical methods. The explored Al(2)O(3)/SiO(2)/TiO(2) consists of amorphous alumina ( approximately 22 wt%), amorphous silica ( approximately 28 wt%), and crystalline titania ( approximately 50 wt%, with a blend of anatase (88%) and rutile (12%)) and has a wide assortment of Brønsted and Lewis acid sites, which provide a greater acidity than that of individual fumed alumina, silica, or titania and an acidity close to that of fumed alumina/silica or titania/silica. The changes in the Gibbs free energy (DeltaG) of interfacial water in an aqueous suspension of Al(2)O(3)/SiO(2)/TiO(2) are close to the DeltaG values of the dispersions of pure rutile but markedly lower than those of alumina, anatase, or rutile covered by alumina and silica. The zeta potential of Al(2)O(3)/SiO(2)/TiO(2) (pH of the isoelectric point (IEP) equals approximately 3.3) is akin to that of fumed titania (pH(IEP(TiO2)) approximately 6) at pH > 6, but it significantly differs from the zeta of fumed alumina (pH(IEP(Al2O3)) approximately 9.8) at any pH value as well as those of fumed silica, titania/silica, and alumina/silica at pH < 6. The particle size distribution in the diluted aqueous suspensions of Al(2)O(3)/SiO(2)/TiO(2) studied by means of photon correlation spectroscopy depends relatively slightly on pH in contrast to the titania/silica or alumina/silica dispersions. Theoretical calculations of oxide cluster interaction with water show a high probability of hydrolysis of Al-O-Ti and Si-O-Ti bonds strained at the interface of alumina/titania or silica/titania due to structural differences in the lattices of the corresponding individual oxides. Ab initio calculated chemical shift delta(H) values of H atoms in different hydroxyl groups at the oxide clusters and in bound water molecules are in agreement with the (1)H NMR data and show a significant impact of charged particles (H(3)O(+) or OH(-)) on the average delta(H) values of water droplets with (H(2)O)(n) at n between 2 and 48. Copyright 1999 Academic Press.

Aqueous Suspensions of Highly Disperse Silica and Germania/Silica

Highly disperse germania has been synthesized on the surface of fumed silica by the chemical vapor deposition (CVD) technique. Aqueous suspensions both of unmodified fumed silica and of the obtained germania/silica (GS) samples have been studied by electrophoresis, photon correlation spectroscopy, nuclear magnetic resonance (1H NMR), and quantum chemical semiempirical AM1-SM1 methods. For suspensions of GS samples, electrophoretic mobility, isoelectric point (IEP), particle size distribution, average effective diameter (Def), and free energy changes (DeltaG) of interfacial water were found to depend nonlinearly on the concentration of germania (CGeO2). At small concentrations, the structure of the synthesized germania is clustered rather than layered. For the last samples, maximum reduction of the free energy for interfacial water and larger values of IEP and Def in comparison with GS at high CGeO2 or unmodified silica have been observed. In suspensions, the particle size distributions for silica and GS are uni-, bi-, and trimodal and depend on pH and CGeO2. Values of polydispersity (P) are very rarely smaller than 0.05 and are usually between 0.25 and 0.70, which points to the wide size distribution. The solvation energy of the charged and uncharged GS clusters calculated by AM1-SM1 method decreases with increasing germania concentration. Copyright 1998 Academic Press.