Self-assembled Monolayers of Two Aromatic Disulfides and a Diselenide on Polycrystalline Silver Films: An Investigation by SERS and XPS

One Stone Three Birds: Silver Sulfadiazine Modulates the Stability and Dynamics of Hydrogels for Infected Wound Healing

Dynamic covalent bond hydrogels have demonstrated significant application potential in biomedical fields for their dynamic reversibility. However, the contradiction between the stability and dynamics of the hydrogel restricts its application. Here, utilizing silver sulfadiazine (AgSD) as a catalyst, hyaluronic acid-based hydrogels are constructed through imine bond crosslinking and incorporated disulfide bonds within the same crosslinking chain. It is found that AgSD can accelerate the formation of imine crosslinking bonds to improve the stability of hydrogels, thereby shortening the gelation time by ≈36.9 times, enhancing compression strength and adhesion strength by ≈2.4 times and 1.7 times, respectively, while inhibiting swelling and degradation rates to ≈2.1 times and 3.7 times. Besides, AgSD can coordinate with disulfide bonds to enhance the dynamics of hydrogel, enhancing the hydrogel self-healing efficiency by ≈2.3 times while reducing the relaxation time by ≈25.1 times. Significantly, AgSD imparts remarkable antibacterial properties to the hydrogel, thereby effectively facilitating the healing of bacterial infected wounds. Consequently, introducing AgSD enables hydrogels to possess concurrent stability, dynamics, and antibacterial properties. This strategy of regulating hydrogels by introducing AgSD provides a valuable reference for the application of dynamic covalent bonds.

Simultaneous in situ nutrient recovery and sustainable wastewater purification based on metal anion- and cation-targeted selective adsorbents

The recovery of nitrogen (N) and phosphorus (P) from wastewater is of great importance in addressing the global nutrient crisis. The limitations of existing methods require the development of effective technology. Here, two different hydrogel adsorbents were fabricated with good separation ability for metal cation (M⁺) and metal anion (M^-) but showed little removal of nutrients. Based on the materials, a novel three-stage operation system combining adsorption and capacitive deionization (CDI) technology was presented for nutrient recovery and wastewater treatment. In the first two stages, mixed metals in wastewater were successfully separated (Cu²⁺: 144.6 mg/g; Cr₂O₇^2-: 167.0 mg/g), and nutrients were retained (N and P < 1 mg/g). In the third stage, the residual trace metal ions in the solution were removed (2.0 mg/L to N/A), and the nutrients were enriched through electroadsorption and desorption processes by CDI. Plants using recovered liquid fertilizers revealed similar values for height, root length, and chlorophyll compared with those obtained using actual fertilizers. The results indicated that this novel three-stage operation system (3S A-C system) combining adsorption and CDI is efficient in recovering liquid fertilizers from wastewater and is a promising technology for simultaneously addressing nutrient crises and environmental pollution.

Comparative Study on the Corrosion Inhibitive Effect of 2-Mecraptobenzothiazole and Na2HPO4 on Industrial Conveying API 5L X42 Pipeline Steel

Mild or low-carbon steel has an increasing utilization and is widely used for building construction, machinery parts, and pipelines, because it can be machined easily and has enhanced weldability as well as a low price. In any case, the corrosion resistance of mild steel under the conditions in industrial applications or in atmosphere is a thoughtful concern. This study inquires into the application of 2-mecraptobenzothiazole (MBT) and Na2HPO4 as corrosion inhibitors for the protection of API 5L X42 pipeline steel in 3.5 wt % NaCl as well as in water from the Athens city supply system. The electrochemical/morphological characterizations of the aforementioned mild steel proved that the corrosion protection mechanisms can be assigned to the protective layers created onto the metal surface because of the presence of the inhibitors, which prevent chloride’s penetration. The synergistic effect of the MBT and Na2HPO4 corrosion inhibition behavior, in a molar ratio of 1:1, revealed that the additives performed effectively with corrosion inhibition efficiency above 90%.

Self-assembled selenium monolayers: from nanotechnology to materials science and adaptive catalysis

Self-assembled monolayers (SAMs) of selenium have emerged into a rapidly developing field of nanotechnology with several promising opportunities in materials chemistry and catalysis. Comparison between sulfur-based self-assembled monolayers and newly developed selenium-based monolayers reveal outstanding complimentary features on surface chemistry and highlighted the key role of the headgroup element. Diverse structural properties and reactivity of organosulfur and organoselenium groups on the surface provide flexible frameworks to create new generations of materials and adaptive catalysts with unprecedented selectivity. Important practical utility of adaptive catalytic systems deals with development of sustainable technologies and industrial processes based on natural resources. Independent development of nanotechnology, materials science and catalysis has led to the discovery of common fundamental principles of the surface chemistry of chalcogen compounds.

One-, two-, and three-dimensional superstructures of gold nanorods induced by dimercaptosuccinic acid

A method is described for assembling gold nanorods into one-, two-, and three-dimensional superstructures. The addition of dimercaptosuccinic acid (DMSA) into the nanorod solution was found to induce self-assembly of the latter to one-dimensional "tapelike", two-dimensional "sheetlike" and three-dimensional "superlattice-like" structures depending on the DMSA concentration. The assembly was found to follow a smectic structure, where the nanorod long axes are parallel to each other. The rods are spaced 8.5 +/- 0.3 nm apart in the resulting structures, which extend over several micrometers in length. Organizations perpendicular to the grid were also found. The nanorod tapes were found to bend, and they form circular assemblies as well. The assembly and morphology of the nanorod structures were characterized by transmission electron microscopy and UV-vis spectroscopy. The effect of the DMSA concentration as well as the pH of the medium was also studied. On the basis of several control experiments utilizing similar molecules, charge neutralization of the nanorods by the carboxylic group of DMSA was found to be the principal reason for such an assembly, while the mercapto groups render additional stability to its structure. A mechanistic model of the assembly is proposed. This type of assembly would plausibly function as a plasmonic waveguide in potential nanodevices.

UV polymerization of self-assembled monolayers of a novel diacetylene on silver: a spectroscopic analysis by surface plasmon resonance and surface enhanced Raman scattering

UV polymerization of self-assembled monolayers of a novel carbazolyl-diacetylene (CDS9) chemisorbed on silver films was demonstrated by surface plasmon resonance (SPR) and surface enhanced Raman scattering (SERS) experiments. SPR tests performed during UV exposure permitted one to observe the growth of the absorption coefficient, associated with the formation of the polymeric backbone. The Raman spectra of polymerized monolayers exhibited the bands associated with the C=C stretching modes of the conjugated backbone, typical of the blue and red polymeric phases usually present in polydiacetylenes, with a clear predominance of the red form. Moreover, the strong surface enhancement of the Raman band corresponding to the aromatic C=C stretching modes suggested that carbazolyl groups arrange nearly perpendicularly to the metal surface. In contrast, the absence of a SERS signal in the region of conjugated C[triple bond]C bond stretchings confirmed a polymerization scheme with conjugated triple bonds nearly parallel to the plane of the metal.

Scanning Tunneling Microscopy, Fourier Transform Infrared Spectroscopy, and Electrochemical Characterization of 2-Naphthalenethiol Self-Assembled Monolayers on the Au Surface: A Study of Bridge-Mediated Electron Transfer in Ru(NH3)62+|Ru(NH3)63+ Redox Reactions

We have studied the structure, adsorption kinetics, and barrier properties of self-assembled monolayers of 2-naphthalenethiol on Au using electrochemical techniques, grazing-angle Fourier transform infrared (FTIR) spectroscopy, and scanning tunneling microscopy (STM). The results of cyclic voltammetric and impedance measurements using redox probes show that 2-naphthalenethiol on Au forms a stable and reproducible, but moderately blocking, monolayer. Annealing of the self-assembled monolayer (SAM)-modified surface at 72 +/- 2 degrees C remarkably improves the blocking property of the monolayer of 2-naphthalenethiol on Au. From the study of kinetics of SAM formation, we find that the self-assembly follows Langmuir adsorption isotherm. Our STM and FTIR results show that the molecules are adsorbed with the naphthalene ring tilted from the surface normal by forming a square root 3 x 3 R30 degrees overlayer structure. From our studies, we conclude that the electron-transfer reaction of ferro/ferricyanide in the freshly formed monolayer occurs predominantly through the pinholes and defects present in the monolayer. However, in the case of thermally annealed specimen, although the ferro/ferricyanide reaction is almost completely blocked, the electron-transfer reaction of hexaammineruthenium(III) chloride is not significantly inhibited. It is proposed that the electron-transfer reaction in the case of the ruthenium redox couple takes place by a tunneling mechanism through the high-electron-density aromatic naphthalene ring acting as a bridge between the monolayer-modified electrode and the ruthenium complex.