Alpha-helix mimicry of a beta-turn

An autoinhibited state of 53BP1 revealed by small molecule antagonists and protein engineering

The recruitment of 53BP1 to chromatin, mediated by its recognition of histone H4 dimethylated at lysine 20 (H4K20me2), is important for DNA double-strand break repair. Using a series of small molecule antagonists, we demonstrate a conformational equilibrium between an open and a pre-existing lowly populated closed state of 53BP1 in which the H4K20me2 binding surface is buried at the interface between two interacting 53BP1 molecules. In cells, these antagonists inhibit the chromatin recruitment of wild type 53BP1, but do not affect 53BP1 variants unable to access the closed conformation despite preservation of the H4K20me2 binding site. Thus, this inhibition operates by shifting the conformational equilibrium toward the closed state. Our work therefore identifies an auto-associated form of 53BP1-autoinhibited for chromatin binding-that can be stabilized by small molecule ligands encapsulated between two 53BP1 protomers. Such ligands are valuable research tools to study the function of 53BP1 and have the potential to facilitate the development of new drugs for cancer therapy.

An autoinhibited state of 53BP1 revealed by small molecule antagonists and protein engineering

The recruitment of 53BP1 to chromatin, mediated by its recognition of histone H4 dimethylated at lysine 20 (H4K20me2), is important for DNA double-strand break repair. Using a series of small molecule antagonists, we demonstrate a conformational equilibrium between an open and a pre-existing lowly populated closed state of 53BP1 in which the H4K20me2 binding surface is buried at the interface between two interacting 53BP1 molecules. In cells, these antagonists inhibit the chromatin recruitment of wild type 53BP1, but do not affect 53BP1 variants unable to access the closed conformation despite preservation of the H4K20me2 binding site. Thus, this inhibition operates by shifting the conformational equilibrium toward the closed state. Our work therefore identifies an auto-associated form of 53BP1 - autoinhibited for chromatin binding - that can be stabilized by small molecule ligands encapsulated between two 53BP1 protomers. Such ligands are valuable research tools to study the function of 53BP1 and have the potential to facilitate the development of new drugs for cancer therapy.

A critical assessment of putative gatekeeper interactions in the villin headpiece helical subdomain

The helical subdomain of the villin headpiece (HP36) is one of the smallest naturally occurring proteins that folds cooperatively. Its small size, rapid folding, and simple three-helix topology have made it an extraordinary popular model system for computational, theoretical, and experimental studies of protein folding. Aromatic-proline interactions involving Trp64 and Pro62 have been proposed to play a critical role in specifying the subdomain fold by acting as gatekeeper residues. Note that the numbering corresponds to full-length headpiece. Mutation of Pro62 has been shown to lead to a protein that does not fold, but this may arise for two different reasons: The residue may make interactions that are critical for the specificity of the fold or the mutation may simply destabilize the domain. In the first case, the protein cannot fold, while in the second, the small fraction of molecules that do fold adopt the correct structure. The modest stability of the wild type prevents a critical analysis of these interactions because even moderately destabilizing mutations lead to a very small folded state population. Using a hyperstable variant of HP36, denoted DM HP36, as our new wild type, we characterized a set of mutants designed to assess the role of the putative gatekeeper interactions. Four single mutants, DM Pro62Ala, DM Trp64Leu, DM Trp64Lys, and DM Trp64Ala, and a double mutant, DM Pro62Ala Trp64Leu, were prepared. All mutants are less stable than DM HP36, but all are well folded as judged by CD and (1)H NMR. All of the mutants display sigmoidal thermal unfolding and urea-induced unfolding curves. Double-mutant cycle analysis shows that the interactions between Pro62 and Trp64 are weak but favorable. Interactions involving Pro62 and proline-aromatic interactions are, thus, not required for specifying the subdomain fold. The implications for the design and thermodynamics of miniature proteins are discussed.

Topological side-chain classification of β-turns: Ideal motifs for peptidomimetic development

Beta-turns are important topological motifs for biological recognition of proteins and peptides. Organic molecules that sample the side chain positions of beta-turns have shown broad binding capacity to multiple different receptors, for example benzodiazepines. Beta-turns have traditionally been classified into various types based on the backbone dihedral angles (phi2, psi2, phi3 and psi3). Indeed, 57-68% of beta-turns are currently classified into 8 different backbone families (Type I, Type II, Type I', Type II', Type VIII, Type VIa1, Type VIa2 and Type VIb and Type IV which represents unclassified beta-turns). Although this classification of beta-turns has been useful, the resulting beta-turn types are not ideal for the design of beta-turn mimetics as they do not reflect topological features of the recognition elements, the side chains. To overcome this, we have extracted beta-turns from a data set of non-homologous and high-resolution protein crystal structures. The side chain positions, as defined by C(alpha)-C(beta) vectors, of these turns have been clustered using the kth nearest neighbor clustering and filtered nearest centroid sorting algorithms. Nine clusters were obtained that cluster 90% of the data, and the average intra-cluster RMSD of the four C(alpha)-C(beta) vectors is 0.36. The nine clusters therefore represent the topology of the side chain scaffold architecture of the vast majority of beta-turns. The mean structures of the nine clusters are useful for the development of beta-turn mimetics and as biological descriptors for focusing combinatorial chemistry towards biologically relevant topological space.

Toward a better understanding of the basis of the molecular mimicry of polysaccharide antigens by peptides: the example of Shigella flexneri 5a

Protein conjugates of oligosaccharides or peptides that mimic complex bacterial polysaccharide antigens represent alternatives to the classical polysaccharide-based conjugate vaccines developed so far. Hence, a better understanding of the molecular basis ensuring appropriate mimicry is required in order to design efficient carbohydrate mimic-based vaccines. This study focuses on the following two unrelated sets of mimics of the Shigella flexneri 5a O-specific polysaccharide (O-SP): (i) a synthetic branched pentasaccharide known to mimic the average solution conformation of S. flexneri 5a O-SP, and (ii) three nonapeptides selected upon screening of phage-displayed peptide libraries with two protective murine monoclonal antibodies (mAbs) of the A isotype specific for S. flexneri 5a O-SP. By inducing anti-O-SP antibodies upon immunization in mice when appropriately presented to the immune system, the pentasaccharide and peptides p100c and p115, but not peptide p22, were qualified as mimotopes of the native antigen. NMR studies based on transferred NOE (trNOE) experiments revealed that both kinds of mimotopes had an average conformation when bound to the mAbs that was close to that of their free form. Most interestingly, saturation transfer difference (STD) experiments showed that the characteristic turn conformations adopted by the major conformers of p100c and p115, as well as of p22, are clearly involved in mAb binding. These latter experiments also showed that the branched glucose residue of the pentasaccharide was a key part of the determinant recognized by the protective mAbs. Finally, by using NMR-derived pentasaccharide and peptide conformations coupled to STD information, models of antigen-antibody interaction were obtained. Most interestingly, only one model was found compatible with experimental data when large O-SP fragments were docked into one of the mIgA-binding sites. This newly made available system provides a new contribution to the understanding of the molecular mimicry of complex polysaccharides by peptides and short oligosaccharides.

Rapid cooperative two-state folding of a miniature alpha-beta protein and design of a thermostable variant

There is a great deal of interest in developing small stably folded miniature proteins. A limited number of these molecules have been described, however they typically have not been characterized in depth. In particular, almost no detailed studies of the thermodynamics and folding kinetics of these proteins have been reported. Here we describe detailed studies of the thermodynamics and kinetics of folding of a 39 residue mixed alpha-beta protein (NTL9(1-39)) derived from the N-terminal domain of the ribosomal protein L9. The protein folds cooperatively and rapidly in a two-state fashion to a native state typical of those found for normal globular proteins. At pH 5.4 in 20mM sodium acetate, 100mM NaCl the temperature of maximum stability is 6 degrees C, the t(m) is 65.3 degrees C, deltaH degrees (t(m)) is between 24.6 kcalmol(-1) and 26.3 kcalmol(-1), and deltaC(p) degrees is 0.38 kcalmol(-1)deg(-1). The thermodynamic parameters are in the range expected on the basis of per residue values determined from databases of globular proteins. H/2H exchange measurements reveal a set of amides that exchange via global unfolding, exactly as expected for a normal cooperatively folded globular protein. Kinetic measurements show that folding is two-state folding. The folding rate is 640 s(-1) and the value of deltaG degrees calculated from the folding and unfolding rates is in excellent agreement with the equilibrium value. A designed thermostable variant, generated by mutating K12 to M, was characterized and found to have a t(m) of 82 degrees C. Equilibrium and kinetic measurements demonstrate that its folding is cooperative and two-state.

Motions and structural variability within toxins: implication for their use as scaffolds for protein engineering

Animal toxins are small proteins built on the basis of a few disulfide bonded frameworks. Because of their high variability in sequence and biologic function, these proteins are now used as templates for protein engineering. Here we report the extensive characterization of the structure and dynamics of two toxin folds, the "three-finger" fold and the short alpha/beta scorpion fold found in snake and scorpion venoms, respectively. These two folds have a very different architecture; the short alpha/beta scorpion fold is highly compact, whereas the "three-finger" fold is a beta structure presenting large flexible loops. First, the crystal structure of the snake toxin alpha was solved at 1.8-A resolution. Then, long molecular dynamics simulations (10 ns) in water boxes of the snake toxin alpha and the scorpion charybdotoxin were performed, starting either from the crystal or the solution structure. For both proteins, the crystal structure is stabilized by more hydrogen bonds than the solution structure, and the trajectory starting from the X-ray structure is more stable than the trajectory started from the NMR structure. The trajectories started from the X-ray structure are in agreement with the experimental NMR and X-ray data about the protein dynamics. Both proteins exhibit fast motions with an amplitude correlated to their secondary structure. In contrast, slower motions are essentially only observed in toxin alpha. The regions submitted to rare motions during the simulations are those that exhibit millisecond time-scale motions. Lastly, the structural variations within each fold family are described. The localization and the amplitude of these variations suggest that the regions presenting large-scale motions should be those tolerant to large insertions or deletions.

Exploiting molecular mimicry: defining rules of the game

Molecular mimicry has been touted as a mean to develop new generation of vaccines to target carbohydrate antigens on pathogens and on tumor cells. Structural and immunological rules governing molecular mimicry require definition for its successful exploitation. Of interest are the kinds of structures that peptides adopt as carbohydrate mimics, the extent to which topological or sequence similarities among peptide mimeotopes define serum cross-reactivity to carbohydrate antigens and the extent to which peptide mimeotopes affect T-cell responses. Rational design concepts can be applied to define how a peptide may mimic carbohydrate antigens, similarities in binding affinities of antibodies for carbohydrate and for peptides, how peptides can mimic core structures on otherwise dissimilar carbohydrate antigens, and how peptide mimeotopes can be used to manipulate cellular responses not achievable by carbohydrate antigens.

Surface grafting onto template-assembled synthetic protein scaffolds in molecular recognition

Creating functional biological molecules de novo requires a detailed understanding of the intimate relationship between primary sequence, folding mechanism, and packing topology, and remains up to now a most challenging goal in protein design and mimicry. As a consequence, the use of well-defined robust macromolecules as scaffolds for the introduction of function by grafting surface residues has become a major objective in protein engineering and de novo design. In this article, the concept of scaffolds is demonstrated on some selected examples, illustrating that novel types of functional molecules can be generated. Reengineered proteins and, most notably, de novo designed peptide scaffolds exhibiting molecular function, are ideal tools for structure-function studies and as leads in drug design.

Matching organic libraries with protein-substructures

We present a general approach which allows automatic identification of sub-structures in proteins that resemble given three-dimensional templates. This paper documents its success with non-peptide templates such as beta-turn mimetics. We considered well-tested turn-mimetics such as the bicyclic turned dipeptide (BTD), spiro lactam (Spiro) and the 2,5-disubstituded tetrahydrofuran (THF), a new furan-derivative which was recently developed and characterized. The detected geometric similarity between the templates and the protein patches corresponds to r.m.s.-values of 0.3 A for more than 80% of the constituting atoms, which is typical for active site comparisons of homologous proteins. This fast automatic procedure might be of biomedical value for finding special mimicking leads for particular protein sub-structures as well as for template-assembled synthetic protein (TASP) design.

Characterization of the internal motions of a chimeric protein by 13C NMR highlights the important dynamic consequences of the engineering on a millisecond time scale

By transferring the central curaremimetic beta hairpin of the snake toxin alpha into the scaffold of the scorpion charybdotoxin, a chimeric protein was constructed that reproduced the three-dimensional structure and partially reproduced the function of the parent beta hairpin, without perturbing the three-dimensional structure of the scaffold [1]. Picosecond to hour time scale motions of charybdotoxin and the engineered protein were observed, in order to evaluate the dynamic consequences of the six deletions and eight mutations differentiating the two molecules. The chimeric protein dynamics were also compared to that of toxin alpha, in order to examine the beta hairpin motions in both structural contexts. Thus, 13C R1, R1rho and 1H-->13C nOe were measured for all the CalphaHalpha and threonine CbetaHbeta vectors. As the proteins were not labeled, accordion techniques combined to coherence selection by pulsed field gradients and preservation of magnetization following equivalent pathways were used to considerably reduce the spectrometer time needed. On one hand, we observed that the chimeric protein and charybdotoxin are subjected to similar picosecond to nanosecond time scale motions except around the modified beta sheet region. The chimeric protein also exhibits an additional millisecond time scale motion on its whole sequence, and its beta structure is less stable on a minute to hour time scale. On the other hand, when the beta hairpin dynamics is compared in two different structural contexts, i.e. in the chimeric protein and the curaremimetic toxin alpha, the picosecond to nanosecond time scale motions are fairly conserved. However, the microsecond to millisecond time scale motions are different on most of the beta hairpin sequence, and the beta sheet seems more stable in toxin alpha than in the chimera. The slower microsecond to hour time scale motions seem to be extremely sensitive to the structural context, and thus poorly transferred from one protein to another.

De novo protein design. I. In search of stability and specificity

We have developed a fully automated protein design strategy that works on the entire sequence of the protein and uses a full atom representation. At each step of the procedure, an all-atom model of the protein is built using the template protein structure and the current designed sequence. The energy of the model is used to drive a Monte Carlo optimization in sequence space: random moves are either accepted or rejected based on the Metropolis criterion. We rely on the physical forces that stabilize native protein structures to choose the optimum sequence. Our energy function includes van der Waals interactions, electrostatics and an environment free energy. Successful protein design should be specific and generate a sequence compatible with the template fold and incompatible with competing folds. We impose specificity by maintaining the amino acid composition constant, based on the random energy model. The specificity of the optimized sequence is tested by fold recognition techniques. Successful sequence designs for the B1 domain of protein G, for the lambda repressor and for sperm whale myoglobin are presented. We show that each additional term of the energy function improves the performance of our design procedure: the van der Waals term ensures correct packing, the electrostatics term increases the specificity for the correct native fold, and the environment solvation term ensures a correct pattern of buried hydrophobic and exposed hydrophilic residues. For the globin family, we show that we can design a protein sequence that is stable in the myoglobin fold, yet incompatible with the very similar hemoglobin fold.

Solution structure of a conformationally constrained Arg-Gly-Asp-like motif inserted into the alpha/beta scaffold of leiurotoxin I

A monoclonal antibody, AC7, directed against the RGD-binding site of the GPIIIa subunit of the platelet fibrinogen receptor, interacts with activated platelet. The H3 region (H3, RQMIRGYFDV sequence) of the complementarity-determining region 3 heavy chain of AC7 inhibits platelet aggregation and fibrinogen binding to platelet. H3 contains the arginine, glycine and aspartate residues, but in an unusual order. The solution structure of the decapeptide has been studied by proton NMR. The NMR data suggested a helical equilibrium. To test whether the helical structure of H3 was biologically relevant, a conformationally constrained peptide with the RGD-like motif was designed. The sequence of a scorpion toxin (leiurotoxin I) has been modified in order to constrain the H3 sequence in a rigid helical conformation. The structure of leiurotoxin I consists of a beta-sheet and an alpha-helix, linked by three disulfide bridges. The structural feature of the chimeric peptide (H3-leiurotoxin) has been determined by standard two-dimensional NMR techniques. H3-Leiurotoxin structure closely resembles that of leiurotoxin I.