DNA cleavage by the EcoRV restriction endonuclease: roles of divalent metal ions in specificity and catalysis

Kinetic Analysis of the Interaction of Nicking Endonuclease BspD6I with DNA

Nicking endonucleases (NEs) are enzymes that incise only one strand of the duplex to produce a DNA molecule that is 'nicked' rather than cleaved in two. Since these precision tools are used in genetic engineering and genome editing, information about their mechanism of action at all stages of DNA recognition and phosphodiester bond hydrolysis is essential. For the first time, fast kinetics of the Nt.BspD6I interaction with DNA were studied by the stopped-flow technique, and changes of optical characteristics were registered for the enzyme or DNA molecules. The role of divalent metal cations was estimated at all steps of Nt.BspD6I-DNA complex formation. It was demonstrated that divalent metal ions are not required for the formation of a non-specific complex of the protein with DNA. Nt.BspD6I bound five-fold more efficiently to its recognition site in DNA than to a random DNA. DNA bending was confirmed during the specific binding of Nt.BspD6I to a substrate. The optimal size of Nt.BspD6I's binding site in DNA as determined in this work should be taken into account in methods of detection of nucleic acid sequences and/or even various base modifications by means of NEs.

Structural basis for recognition and repair of the 3'-phosphate by NExo, a base excision DNA repair nuclease from Neisseria meningitidis

NExo is an enzyme from Neisseria meningitidis that is specialized in the removal of the 3'-phosphate and other 3'-lesions, which are potential blocks for DNA repair. NExo is a highly active DNA 3'-phosphatase, and although it is from the class II AP family it lacks AP endonuclease activity. In contrast, the NExo homologue NApe, lacks 3'-phosphatase activity but is an efficient AP endonuclease. These enzymes act together to protect the meningococcus from DNA damage arising mainly from oxidative stress and spontaneous base loss. In this work, we present crystal structures of the specialized 3'-phosphatase NExo bound to DNA in the presence and absence of a 3'-phosphate lesion. We have outlined the reaction mechanism of NExo, and using point mutations we bring mechanistic insights into the specificity of the 3'-phosphatase activity of NExo. Our data provide further insight into the molecular origins of plasticity in substrate recognition for this class of enzymes. From this we hypothesize that these specialized enzymes lead to enhanced efficiency and accuracy of DNA repair and that this is important for the biological niche occupied by this bacterium.

Role of Mg2+ Ions in DNA Hydrolysis by EcoRV, Studied by the 3D-Reference Interaction Site Model and Molecular Dynamics

The role of Mg²⁺ ions during precursor formation in DNA hydrolysis by the homodimeric restriction enzyme EcoRV was elucidated based on the 3D-reference interaction site model (RISM) theory and the molecular dynamics (MD) simulation. From an analysis of the spatial distribution of Mg²⁺ in an active site using 3D-RISM, we identified a new position for Mg²⁺ in the X-ray EcoRV-DNA complex structure ( 1rvb ). We refer to the position as site IV^†. Site IV^† is almost at the same position as that of a Ca²⁺ ion in the superimposed X-ray crystallographic active-site structure of the PvuII-DNA complex ( 1f0o ). 3D-RISM was also used to locate the position of water molecules, including the water nucleophile at the active site. MD simulations were carried out with the initial structure having two Mg²⁺ ions at site IV^† and at site I*, experimentally identified by Horton et al., to find a stable complex structure in which the DNA fragment was rearranged to orient the scissile bond direction toward the water nucleophile. The equilibrium active-site structure of the EcoRV-DNA complex obtained from the MD simulation was similar to the superimposed X-ray crystallographic structure of the BamHI-DNA complex ( 2bam ). In the active-site structure, two metal ions have almost the same position (≤1.0 Å) as that of 2bam , and the scissile phosphate is twisted to orient the scissile bond toward the water nucleophile, as is the case in 2bam . We propose the equilibrium active-site structure obtained in this study as a precursor for the hydrolysis reaction of EcoRV.

Metal Ion Binding at the Catalytic Site Induces Widely Distributed Changes in a Sequence Specific Protein-DNA Complex

Metal ion cofactors can alter the energetics and specificity of sequence specific protein–DNA interactions, but it is unknown if the underlying effects on structure and dynamics are local or dispersed throughout the protein–DNA complex. This work uses EcoRV endonuclease as a model, and catalytically inactive lanthanide ions, which replace the Mg²⁺ cofactor. Nuclear magnetic resonance (NMR) titrations indicate that four Lu³⁺ or two La³⁺ cations bind, and two new crystal structures confirm that Lu³⁺ binding is confined to the active sites. NMR spectra show that the metal-free EcoRV complex with cognate (GATATC) DNA is structurally distinct from the nonspecific complex, and that metal ion binding sites are not assembled in the nonspecific complex. NMR chemical shift perturbations were determined for ¹H–¹⁵N amide resonances, for ¹H–¹³C Ile-δ-CH₃ resonances, and for stereospecifically assigned Leu-δ-CH₃ and Val-γ-CH₃ resonances. Many chemical shifts throughout the cognate complex are unperturbed, so metal binding does not induce major conformational changes. However, some large perturbations of amide and side chain methyl resonances occur as far as 34 Å from the metal ions. Concerted changes in specific residues imply that local effects of metal binding are propagated via a β-sheet and an α-helix. Both amide and methyl resonance perturbations indicate changes in the interface between subunits of the EcoRV homodimer. Bound metal ions also affect amide hydrogen exchange rates for distant residues, including a distant subdomain that contacts DNA phosphates and promotes DNA bending, showing that metal ions in the active sites, which relieve electrostatic repulsion between protein and DNA, cause changes in slow dynamics throughout the complex.

Crystal structure of λ exonuclease in complex with DNA and Ca(2+)

Bacteriophage λ exonuclease (λexo) is a ring-shaped homotrimer that resects double-stranded DNA ends in the 5'-3' direction to generate a long 3'-overhang that is a substrate for recombination. λexo is a member of the type II restriction endonuclease-like superfamily of proteins that use a Mg(2+)-dependent mechanism for nucleotide cleavage. A previous structure of λexo in complex with DNA and Mg(2+) was determined using a nuclease defective K131A variant to trap a stable complex. This structure revealed the detailed coordination of the two active site Mg(2+) ions but did not show the interactions involving the side chain of the conserved active site Lys-131 residue. Here, we have determined the crystal structure of wild-type (WT) λexo in complex with the same DNA substrate, but in the presence of Ca(2+) instead of Mg(2+). Surprisingly, there is only one Ca(2+) bound in the active site, near the position of Mg(A) in the structure with Mg(2+). The scissile phosphate is displaced by 2.2 Å relative to its position in the structure with Mg(2+), and the network of interactions involving the attacking water molecule is broken. Thus, the structure does not represent a catalytic configuration. However, the crystal structure does show clear electron density for the side chain of Lys-131, which is held in place by interactions with Gln-157 and Glu-129. By combining the K131A-Mg(2+) and WT-Ca(2+) structures, we constructed a composite model to show the likely interactions of Lys-131 during catalysis. The implications with regard to the catalytic mechanism are discussed.

Distinct facilitated diffusion mechanisms by E. coli Type II restriction endonucleases

The passive search by proteins for particular DNA sequences involving nonspecific DNA is essential for gene regulation, DNA repair, phage defense, and diverse epigenetic processes. Distinct mechanisms contribute to these searches, and it remains unresolved as to which mechanism or blend of mechanisms best suits a particular protein and, more importantly, its biological role. To address this, we compare the translocation properties of two well-studied bacterial restriction endonucleases (ENases), EcoRI and EcoRV. These dimeric, magnesium-dependent enzymes hydrolyze related sites (EcoRI ENase, 5'-GAATTC-3'; EcoRV ENase, 5'-GATATC-3'), leaving overhangs and blunt DNA segments, respectively. Here, we demonstrate that the extensive sliding by EcoRI ENase, involving sliding up to ∼600 bp prior to dissociating from the DNA, contrasts with a larger reliance on hopping mechanism(s) by EcoRV ENase. The mechanism displayed by EcoRI ENase results in a highly thorough search of DNA, whereas the EcoRV ENase mechanism results in an extended, yet less rigorous, interrogation of DNA sequence space. We describe how these mechanistic distinctions are complemented by other aspects of these endonucleases, such as the 10-fold higher in vivo concentrations of EcoRI ENase compared to that of EcoRV ENase. Further, we hypothesize that the highly diverse enzyme arsenal that bacteria employ against foreign DNA involves seemingly similar enzymes that rely on distinct but complementary search mechanisms. Our comparative approach reveals how different proteins utilize distinct site-locating strategies.

Calcium inhibition of ribonuclease H1 two-metal ion catalysis

Most phosphate-processing enzymes require Mg(2+) as a cofactor to catalyze nucleotide cleavage and transfer reactions. Ca(2+) ions inhibit many of these enzymatic activities, despite Ca(2+) and Mg(2+) having comparable binding affinities and overall biological abundances. Here we study the molecular details of the calcium inhibition mechanism for phosphodiester cleavage, an essential reaction in the metabolism of nucleic acids and nucleotides, by comparing Ca(2+)- and Mg(2+) catalyzed reactions. We study the functional roles of the specific metal ion sites A and B in enabling the catalytic cleavage of an RNA/DNA hybrid substrate by B. halodurans ribonuclease (RNase) H1 using hybrid quantum-mechanics/molecular mechanics (QM/MM) free energy calculations. We find that Ca(2+) substitution of either of the two active-site Mg(2+) ions substantially increases the height of the reaction barrier and thereby abolishes the catalytic activity. Remarkably, Ca(2+) at the A site is inactive also in Mg(2+)-optimized active-site structures along the reaction path, whereas Mg(2+) substitution recovers activity in Ca(2+)-optimized structures. Geometric changes resulting from Ca(2+) substitution at metal ion site A may thus be a secondary factor in the loss of catalytic activity. By contrast, at metal ion site B geometry plays a more important role, with only a partial recovery of activity after Mg(2+) substitution in Ca(2+)-optimized structures. Ca(2+)-substitution also leads to a change in mechanism, with deprotonation of the water nucleophile requiring a closer approach to the scissile phosphate, which in turn increases the barrier. As a result, Ca(2+) is less efficient in activating the water. As a likely cause for the different reactivities of Mg(2+) and Ca(2+) ions in site A, we identify differences in charge transfer to the ions and the associated decrease in the pKa of the oxygen nucleophile attacking the phosphate group.

Metal ion dependence of DNA cleavage by SepMI and EhoI restriction endonucleases

Most of type II restriction endonucleases show an absolute requirement for divalent metal ions as cofactors for DNA cleavage. While Mg(2+) is the natural cofactor other metal ions can substitute it and mediate the catalysis, however Ca(2+) (alone) only supports DNA binding. To investigate the role of Mg(2+) in DNA cleavage by restriction endonucleases, we have studied the Mg(2+) and Mn(2+) concentration dependence of DNA cleavage by SepMI and EhoI. Digestion reactions were carried out at different Mg(2+) and Mn(2+) concentrations at constant ionic strength. These enzymes showed different behavior regarding the ions requirement, SepMI reached near maximal level of activity between 10 and 20mM while no activity was detected in the presence of Mn(2+) and in the presence of Ca(2+) cleavage activity was significantly decreased. However, EhoI was more highly active in the presence of Mn(2+) than in the presence of Mg(2+) and can be activated by Ca(2+). Our results propose the two-metal ion mechanism for EhoI and the one-metal ion mechanism for SepMI restriction endonuclease. The analysis of the kinetic parameters under steady state conditions showed that SepMI had a K(m) value for pTrcHisB DNA of 6.15 nM and a V(max) of 1.79×10(-2)nM min(-1), while EhoI had a K(m) for pUC19 plasmid of 8.66 nM and a V(max) of 2×10(-2)nM min(-1).

ESR spectroscopy identifies inhibitory Cu2+ sites in a DNA-modifying enzyme to reveal determinants of catalytic specificity

The relationship between DNA sequence recognition and catalytic specificity in a DNA-modifying enzyme was explored using paramagnetic Cu(2+) ions as probes for ESR spectroscopic and biochemical studies. Electron spin echo envelope modulation spectroscopy establishes that Cu(2+) coordinates to histidine residues in the EcoRI endonuclease homodimer bound to its specific DNA recognition site. The coordinated His residues were identified by a unique use of Cu(2+)-ion based long-range distance constraints. Double electron-electron resonance data yield Cu(2+)-Cu(2+) and Cu(2+)-nitroxide distances that are uniquely consistent with one Cu(2+) bound to His114 in each subunit. Isothermal titration calorimetry confirms that two Cu(2+) ions bind per complex. Unexpectedly, Mg(2+)-catalyzed DNA cleavage by EcoRI is profoundly inhibited by Cu(2+) binding at these hitherto unknown sites, 13 Å away from the Mg(2+) positions in the catalytic centers. Molecular dynamics simulations suggest a model for inhibition of catalysis, whereby the Cu(2+) ions alter critical protein-DNA interactions and water molecule positions in the catalytic sites. In the absence of Cu(2+), the Mg(2+)-dependence of EcoRI catalysis shows positive cooperativity, which would enhance EcoRI inactivation of foreign DNA by irreparable double-strand cuts, in preference to readily repaired single-strand nicks. Nonlinear Poisson-Boltzmann calculations suggest that this cooperativity arises because the binding of Mg(2+) in one catalytic site makes the surface electrostatic potential in the distal catalytic site more negative, thus enhancing binding of the second Mg(2+). Taken together, our results shed light on the structural and electrostatic factors that affect site-specific catalysis by this class of endonucleases.

Restriction endonuclease SsoII with photoregulated activity--a "molecular gate" approach

A novel method for regulating the activity of homodimeric proteins--"molecular gate" approach--was proposed and its usefulness illustrated for the type II restriction endonuclease SsoII (R.SsoII) as a model. The "molecular gate" approach is based on the modification of R.SsoII with azobenzene derivatives, which allows regulating DNA binding and cleavage via illumination with light. R.SsoII variants with single cysteine residues introduced at selected positions were obtained and modified with maleimidoazobenzene derivatives. A twofold change in the enzymatic activity after illumination with light of wavelengths of 365 and 470 nm, respectively, was demonstrated when one or two molecules of azobenzene derivatives were attached to the R.SsoII at the entrance of or within the DNA-binding site.

Brønsted analysis and rate-limiting steps for the T5 flap endonuclease catalyzed hydrolysis of exonucleolytic substrates

During replication and repair flap endonucleases (FENs) catalyze endonucleolytic and exonucleolytic (EXO) DNA hydrolyses. Altering the leaving group pK(a), by replacing the departing nucleoside with analogues, had minimal effect on k(cat)/K(M) in a T5FEN-catalyzed EXO reaction, producing a very low Brønsted coefficient, β(lg). Investigation of the viscosity dependence of k(cat)/K(M) revealed that reactions of EXO substrates are rate limited by diffusional encounter of enzyme and substrate, explaining the small β(lg). However, the maximal single turnover rate of the FEN EXO reaction also yields a near zero β(lg). A low β(lg) was also observed when evaluating k(cat)/K(M) for D201I/D204S FEN-catalyzed reactions, even though these reactions were not affected by added viscogen. But an active site K83A mutant produced a β(lg) = -1.2 ± 0.10, closer to the value observed for solution hydrolysis of phosphate diesters. The pH-maximal rate profiles of the WT and K83A FEN reactions both reach a maximum at high pH and do not support an explanation of the data that involves catalysis of leaving group departure by Lys 83 functioning as a general acid. Instead, a rate-limiting physical step, such as substrate unpairing or helical arch ordering, that occurs after substrate association must kinetically hide an inherent large β(lg). It is suggested that K83 acts as an electrostatic catalyst that stabilizes the transition state for phosphate diester hydrolysis. When K83 is removed from the active site, chemistry becomes rate limiting and the leaving group sensitivity of the FEN-catalyzed reaction is revealed.

Substrate-dependent metal preference of PPM1H, a cancer-associated protein phosphatase 2C: comparison with other family members

Protein phosphatase 2C (PP2C) family is characterized by requirement of metal cation for phosphatase activity. We previously established that PPM1H is a cancer-associated member of the PP2C family. Here we further characterized the phosphatase activity of PPM1H, focusing on its dependence on metal cation. PPM1H possesses the potential to dephosphorylate p-nitrophenyl phosphate (pNPP), casein and phosphopeptides. Interestingly, PPM1H shows the metal preference that is varied depending on the substrate (substrate-dependent metal preference); PPM1H prefers Mn(2+) when pNPP or phosphopeptides is used as a substrate. Meanwhile, a preference for Mg(2+) is displayed by PPM1H with casein as a substrate. When both cations are added to the reaction, the degree of the effect is always closer to that with Mn(2+) alone, irrespective of the substrate. This preponderance of Mn(2+) is explained by its greater affinity for PPM1H than Mg(2+). From the literature the substrate-dependent metal preference appears to be shared by other PP2Cs. According to the crystal structure, a binuclear metal center of PP2C plays an important role for coordinating the substrate and nucleophilic waters in the active site. Therefore, the differences in the size, preferred geometry and coordination requirements between two metals, in relation to the substrate, may be responsible for this intriguing property.

Early interrogation and recognition of DNA sequence by indirect readout

Control of replication, transcription, recombination and repair requires proteins capable of finding particular DNA sequences in a background of a large excess of nonspecific sequences. Such recognition can involve direct readout, with direct contacts to the bases of DNA, or in some cases through the less well-characterized indirect readout mechanisms. In order to measure the relative contributions of direct and indirect readout by a sequence specific endonuclease, HincII, a mutant enzyme deficient in a direct contact, was characterized, and surprisingly showed no loss of sequence specificity. The three dimensional crystal structure shows the loss of most of the direct readout contacts to the DNA, possibly capturing an early stage in target site recognition using predominately indirect readout to prescreen sites before full sequence interrogation.

The structure of SgrAI bound to DNA; recognition of an 8 base pair target

The three-dimensional X-ray crystal structure of the 'rare cutting' type II restriction endonuclease SgrAI bound to cognate DNA is presented. SgrAI forms a dimer bound to one duplex of DNA. Two Ca(2+) bind in the enzyme active site, with one ion at the interface between the protein and DNA, and the second bound distal from the DNA. These sites are differentially occupied by Mn(2+), with strong binding at the protein-DNA interface, but only partial occupancy of the distal site. The DNA remains uncleaved in the structures from crystals grown in the presence of either divalent cation. The structure of the dimer of SgrAI is similar to those of Cfr10I, Bse634I and NgoMIV, however no tetrameric structure of SgrAI is observed. DNA contacts to the central CCGG base pairs of the SgrAI canonical target sequence (CR|CCGGYG, | marks the site of cleavage) are found to be very similar to those in the NgoMIV/DNA structure (target sequence G|CCGGC). Specificity at the degenerate YR base pairs of the SgrAI sequence may occur via indirect readout using DNA distortion. Recognition of the outer GC base pairs occurs through a single contact to the G from an arginine side chain located in a region unique to SgrAI.

Identifying and characterizing substrates of the RNase E/G family of enzymes

The study of RNA decay and processing in Escherichia coli has revealed a central role for RNase E, an endonuclease that is essential for cell viability. This enzyme is required for the normal rapid decay of many transcripts and is involved in the processing of precursors of 16S and 5S ribosomal RNA, transfer RNA, the transfer-messenger RNA, and the RNA component of RNase P. Although there is reasonable knowledge of the repertoire of transcripts cleaved by RNase E in E. coli, a detailed understanding of the molecular recognition events that control the cleavage of RNA by this key enzyme is only starting to emerge. Here we describe methods for identifying sites of endonucleolytic cleavage and determining whether they depend on functional RNase E. This is illustrated with the pyrG eno bicistronic transcript, which is cleaved in the intergenic region primarily by an RNase E-dependent activity and not as previously thought by RNase III. We also describe the use of oligoribonucleotide and in vitro-transcribed substrates to investigate cis-acting factors such as 5'-monophosphorylation, which can significantly enhance the rate of cleavage but is insufficient to ensure processivity. Most of the approaches that we describe can be applied to the study of homologs of E. coli RNase E, which have been found in approximately half of the eubacteria that have been sequenced.

Domain organization and metal ion requirement of the Type IIS restriction endonuclease MnlI

A two-domain structure of the Type IIS restriction endonuclease MnlI has been identified by limited proteolysis. An N-terminal domain of the enzyme mediates the sequence-specific interaction with DNA, whereas a monomeric C-terminal domain resembles bacterial colicin nucleases in its requirement for alkaline earth as well as transition metal ions for double- and single-stranded DNA cleavage activities. The results indicate that the fusion of the non-specific HNH-type nuclease to the DNA binding domain had transformed MnlI into a Mg(2+)-, Ni(2+)-, Co(2+)-, Mn(2+)-, Zn(2+)-, Ca(2+)-dependent sequence-specific enzyme. Nevertheless, MnlI retains a residual single-stranded DNA cleavage activity controlled by its C-terminal colicin-like nuclease domain.

Efficient methodology for the cyclization of linear peptide libraries via intramolecularS-alkylation using Multipin™ solid phase peptide synthesis

Methodology is described here for the efficient parallel synthesis and cyclization of linear peptide libraries using intramolecular S-alkylation chemistry in combination with Multipin solid phase peptide synthesis (Multipin SPPS). The effective use of this methodology was demonstrated with the synthesis of a 72-member combinatorial library of cyclic thioether peptide derivatives of the conserved four-residue structural motif DD/EXK found in the active sites of the five crystallographically defined orthodox type II restriction endonucleases, EcoRV, EcoRI, PvuII, BamHI and BglI.

Non-cognate Enzyme–DNA Complex: Structural and Kinetic Analysis of EcoRV Endonuclease Bound to the EcoRI Recognition Site GAATTC

The crystal structure of EcoRV endonuclease bound to non-cognate DNA at 2.0 angstroms resolution shows that very small structural adaptations are sufficient to ensure the extreme sequence specificity characteristic of restriction enzymes. EcoRV bends its specific GATATC site sharply by 50 degrees into the major groove at the center TA step, generating unusual base-base interactions along each individual DNA strand. In the symmetric non-cognate complex bound to GAATTC, the center step bend is relaxed to avoid steric hindrance caused by the different placement of the exocyclic thymine methyl groups. The decreased base-pair unstacking in turn leads to small conformational rearrangements in the sugar-phosphate backbone, sufficient to destabilize binding of crucial divalent metal ions in the active site. A second crystal structure of EcoRV bound to the base-analog GAAUTC site shows that the 50 degrees center-step bend of the DNA is restored. However, while divalent metals bind at high occupancy in this structure, one metal ion shifts away from binding at the scissile DNA phosphate to a position near the 3'-adjacent phosphate group. This may explain why the 10(4)-fold attenuated cleavage efficiency toward GAATTC is reconstituted by less than tenfold toward GAAUTC. Examination of DNA binding and bending by equilibrium and stopped-flow florescence quenching and fluorescence resonance energy transfer (FRET) methods demonstrates that the capacity of EcoRV to bend the GAATTC non-cognate site is severely limited, but that full bending of GAAUTC is achieved at only a threefold reduced rate compared with the cognate complex. Together, the structural and biochemical data demonstrate the existence of distinct mechanisms for ensuring specificity at the bending and catalytic steps, respectively. The limited conformational rearrangements observed in the EcoRV non-cognate complex provide a sharp contrast to the extensive structural changes found in a non-cognate BamHI-DNA crystal structure, thus demonstrating a diversity of mechanisms by which restriction enzymes are able to achieve specificity.

Measurement of the contributions of 1D and 3D pathways to the translocation of a protein along DNA

Proteins that act at specific DNA sequences bind DNA randomly and then translocate to the target site. The translocation is often ascribed to the protein sliding along the DNA while maintaining continuous contact with it. Proteins also can move on DNA by multiple cycles of dissociation/reassociation within the same chain. To distinguish these pathways, a strategy was developed to analyze protein motion between DNA sites. The strategy reveals whether the protein maintains contact with the DNA as it transfers from one site to another by sliding or whether it loses contact by a dissociation/reassociation step. In reactions at low salt, the test protein stayed on the DNA as it traveled between sites, but only when the sites were <50 bp apart. Transfers of >30 bp at in vivo salt, and over distances of >50 bp at any salt, always included at least one dissociation step. Hence, for this enzyme, 1D sliding operates only over short distances at low salt, and 3D dissociation/reassociation is its main mode of translocation.

Mechanism of the Escherichia coli DNA T:G-mismatch endonuclease (Vsr protein) probed with thiophosphate-containing oligodeoxynucleotides

The mechanism of the Escherichia coli DNA T:G mismatch endonuclease (Vsr) has been investigated using oligodeoxynucleotides substituted, at the scissile phosphate, with isomeric phosphorothioates and a 3'-phosphorothiolate. Binding and kinetic data with the phosphorothioates/phosphorothiolate indicate that the two magnesium ions, which constitute essential co-factors, are required to stabilise the extra negative charge developed on the phosphate as the transition state is formed. Additionally one of the magnesium ions serves to activate the leaving group (the non-bridging 3'-oxygen atom of the scissile phosphate) during the hydrolysis reaction. Stereochemical analysis, using the R(p) phosphorothioate isomer, indicates that Vsr carries out a hydrolytic reaction with inversion of stereochemistry at phosphorus, compatible with an in-line attack of water and a pentacovalent transition state with trigonal bipyramidal geometry. In conjunction with structures of Vsr bound to its products, these data allow the reconstruction of the enzyme-substrate complex and a comprehensive description of the hydrolysis mechanism.

Site-Specific DNA-nicking Mutants of the Heterodimeric Restriction Endonuclease R.BbvCI

The restriction enzyme R.BbvCI cleaves duplex DNA within a seven base-pair asymmetric recognition sequence, thus: CCTCAGC/GCTGAGG-->CC--TCAGC/GC--TGAGG. We show that R.BbvCI comprises two different subunits, R(1) and R(2); that each subunit contains a catalytic site for DNA strand hydrolysis; and that these sites act independently and strand-specifically. In turn, each catalytic site was inactivated by mutagenesis to form dimeric enzymes in which only one site remained functional. The altered enzymes hydrolyzed just one strand of the recognition sequence, nicking the DNA rather than cleaving it. Enzymes in which the catalytic site in the R(1) subunit remained functional nicked the bottom strand of the sequence, producing CCTCAGC/GC--TGAGG, while those in which the catalytic site in the R(2) subunit remained functional nicked the top strand, producing CC--TCAGC/GCTGAGG. These DNA-nicking enzymes could prove useful for investigation of DNA repair, recombination, and replication, and for laboratory procedures that initiate from nicks, such as DNA degradation, synthesis, and amplification.

Mechanistic insights from the structures of HincII bound to cognate DNA cleaved from addition of Mg2+ and Mn2+

The three-dimensional X-ray crystal structures of HincII bound to cognate DNA containing GTCGAC and Mn(2+) or Mg(2+), at 2.50A and 2.95A resolution, respectively, are presented. In both structures, the DNA is found cleaved, and the positions of the active-site groups, cleaved phosphate group, and 3' oxygen atom of the leaving group are in very similar positions. Two highly occupied Mn(2+) positions are found in each active site of the four crystallographically independent subunit copies in the HincII/DNA/Mn(2+) structure. The manganese ion closest to the previously identified single Ca(2+) position of HincII is shifted 1.7A and has lost direct ligation to the active-site aspartate residue, Asp127. A Mn(2+)-ligated water molecule in a position analogous to that seen in the HincII/DNA/Ca(2+) structure, and proposed to be the attacking nucleophile, is beyond hydrogen bonding distance from the active-site lysine residue, Lys129, but remains within hydrogen bonding distance from the proRp oxygen atom of the phosphate group 3' to the scissile phosphate group. In addition, the position of the cleaved phosphate group is on the opposite side of the axis connecting the two metal ions relative to that found in the BamHI/product DNA/Mn(2+) structure. Mechanistic implications are discussed, and a model for the two-metal-ion mechanism of DNA cleavage by HincII is proposed.

Ca2+ binding in the active site of HincII: implications for the catalytic mechanism

The 2.8 A crystal structure of the type II restriction endonuclease HincII bound to Ca(2+) and cognate DNA containing GTCGAC is presented. The DNA is uncleaved, and one calcium ion is bound per active site, in a position previously described as site I in the related blunt cutting type II restriction endonuclease EcoRV [Horton, N. C., Newberry, K. J., and Perona, J. J. (1998) Proc. Natl. Acad. Sci. U.S.A. 95 (23), 13489-13494], as well as that found in other related enzymes. Unlike the site I metal in EcoRV, but similar to that of PvuII, NgoMIV, BamHI, BglII, and BglI, the observed calcium cation is directly ligated to the pro-S(p) oxygen of the scissile phosphate. A calcium ion-ligated water molecule is well positioned to act as the nucleophile in the phosphodiester bond cleavage reaction, and is within hydrogen bonding distance of the conserved active site lysine (Lys 129), as well as the pro-R(p) oxygen of the phosphate group 3' of the scissile phosphate, suggesting possible roles for these groups in the catalytic mechanism. Kinetic data consistent with an important role for the 3'-phosphate group in DNA cleavage by HincII are presented. The previously observed sodium ion [Horton, N. C., Dorner, L. F., and Perona, J. J. (2002) Nat. Struct. Biol. 9, 42-47] persists in the active sites of the Ca(2+)-bound structure; however, kinetic data show little effect on the single-turnover rate of DNA cleavage in the absence of Na(+) ions.

Holliday junction binding and resolution by the Rap structure-specific endonuclease of phage lambda

Rap endonuclease targets recombinant joint molecules arising from phage lambda Red-mediated genetic exchange. Previous studies revealed that Rap nicks DNA at the branch point of synthetic Holliday junctions and other DNA structures with a branched component. However, on X junctions incorporating a three base-pair core of homology or with a fixed crossover, Rap failed to make the bilateral strand cleavages characteristic of a Holliday junction resolvase. Here, we demonstrate that Rap can mediate symmetrical resolution of 50 bp and chi Holliday structures containing larger homologous cores. On two different mobile 50 bp junctions Rap displays a weak preference for cleaving the phosphodiester backbone between 5'-GC dinucleotides. The products of resolution on both large and small DNA substrates can be sealed by T4 DNA ligase, confirming the formation of nicked duplexes. Rap protein was also assessed for its capacity to influence the global conformation of junctions in the presence or absence of magnesium ions. Unlike the known Holliday junction binding proteins, Rap does not affect the angle of duplex arms, implying an unorthodox mode of junction binding. The results demonstrate that Rap can function as a Holliday junction resolvase in addition to eliminating other branched structures that may arise during phage recombination.

DNA Cleavage byEcoRV Endonuclease: Two Metal Ions in Three Metal Ion Binding Sites†

Four crystal structures of EcoRV endonuclease mutants K92A and K38A provide new insight into the mechanism of DNA bending and the structural basis for metal-dependent phosphodiester bond cleavage. The removal of a key active site positive charge in the uncleaved K92A-DNA-M(2+) substrate complex results in binding of a sodium ion in the position of the amine nitrogen, suggesting a key role for a positive charge at this position in stabilizing the sharp DNA bend prior to cleavage. By contrast, two structures of K38A cocrystallized with DNA and Mn(2+) ions in different lattice environments reveal cleaved product complexes featuring a common, novel conformation of the scissile phosphate group as compared to all previous EcoRV structures. In these structures, the released 5'-phosphate and 3'-OH groups remain in close juxtaposition with each other and with two Mn(2+) ions that bridge the conserved active site carboxylates. The scissile phosphates are found midway between their positions in the prereactive substrate and postreactive product complexes of the wild-type enzyme. Mn(2+) ions occupy two of the three sites previously described in the prereactive complexes and are plausibly positioned to generate the nucleophilic hydroxide ion, to compensate for the incipient additional negative charge in the transition state, and to ionize a second water for protonation of the 3'-oxyanion. Reconciliation of these findings with earlier X-ray and fluorescence studies suggests a novel mechanism in which a single initially bound metal ion in a third distinct site undergoes a shift in position together with movement of the scissile phosphate deeper into the active site cleft. This reconfigures the local environment to permit binding of the second metal ion followed by movement toward the pentacovalent transition state. The new mechanism suggested here embodies key features of previously proposed two- and three-metal catalytic models, and offers a view of the stereochemical pathway that integrates much of the copious structural and functional data that are available from exhaustive studies in many laboratories.

Preparation of cyclic peptide libraries using intramolecular oxime formation

A new method for the synthesis of cyclic head-to-side chain peptide libraries has been developed in which the key cyclization step involves reaction between a C-terminal ketone and an N-terminal hydroxylamine to form a macrocyclic oxime. This methodology efficiently delivers cyclic products that consist of mixtures of syn and anti isomers.

Simultaneous DNA Binding and Bending by EcoRV Endonuclease Observed by Real-Time Fluorescence†

The complete catalytic cycle of EcoRV endonuclease has been observed by combining fluorescence anisotropy with fluorescence resonance energy transfer (FRET) measurements. Binding, bending, and cleavage of substrate oligonucleotides were monitored in real time by rhodamine-x anisotropy and by FRET between rhodamine and fluorescein dyes attached to opposite ends of a 14-mer DNA duplex. For the cognate GATATC site binding and bending are found to be nearly simultaneous, with association and bending rate constants of (1.45-1.6) x 10(8) M(-1) s(-1). On the basis of the measurement of k(off) by a substrate-trapping approach, the equilibrium dissociation constant of the enzyme-DNA complex in the presence of inhibitory calcium ions was calculated as 3.7 x 10(-12) M from the kinetic constants. Further, the entire DNA cleavage reaction can be observed in the presence of catalytic Mg(2+) ions. These measurements reveal that the binding and bending steps occur at equivalent rates in the presence of either Mg(2+) or Ca(2+), while a slow decrease in fluorescence intensity following bending corresponds to k(cat), which is limited by the cleavage and product dissociation steps. Measurement of k(on) and k(off) in the absence of divalent metals shows that the DNA binding affinity is decreased by 5000-fold to 1.4 x 10(-8) M, and no bending could be detected in this case. Together with crystallographic studies, these data suggest a model for the induced-fit conformational change in which the role of divalent metal ions is to stabilize the sharply bent DNA in an orientation suitable for accessing the catalytic transition state.

Determination of the catalytic parameters of the N-terminal half of Escherichia coli ribonuclease E and the identification of critical functional groups in RNA substrates

Ribonuclease E is required for the rapid decay and correct processing of RNA in Escherichia coli. A detailed understanding of the hydrolysis of RNA by this and related enzymes will require the integration of structural and molecular data with quantitative measurements of RNA hydrolysis. Therefore, an assay for RNaseE that can be set up to have relatively high throughput while being sensitive and quantitative will be advantageous. Here we describe such an assay, which is based on the automated high pressure liquid chromatography analysis of fluorescently labeled RNA samples. We have used this assay to optimize reaction conditions, to determine for the first time the catalytic parameters for a polypeptide of RNaseE, and to investigate the RNaseE-catalyzed reaction through the modification of functional groups within an RNA substrate. We find that catalysis is dependent on both protonated and unprotonated functional groups and that the recognition of a guanosine sequence determinant that is upstream of the scissile bond appears to consist of interactions with the exocyclic 2-amino group, the 7N of the nucleobase and the imino proton or 6-keto group. Additionally, we find that a ribose-like sugar conformation is preferred in the 5'-nucleotide of the scissile phosphodiester bond and that a 2'-hydroxyl group proton is not essential. Steric bulk at the 2' position in the 5'-nucleotide appears to be inhibitory to the reaction. Combined, these observations establish a foundation for the functional interpretation of a three-dimensional structure of the catalytic domain of RNaseE when solved.

Metal Ion Binding in the Active Site of the Junction-resolving Enzyme T7 Endonuclease I in the Presence and in the Absence of DNA

Endonuclease I of bacteriophage T7 is a DNA junction-resolving enzyme. We have previously used crystallography to demonstrate the binding of two manganese ions into the active site that is formed by three carboxylate (Glu 20, Asp 55 and Glu 65) and a lysine residue (Lys 67). Endonuclease I is active in the presence of magnesium, manganese, iron (II) and cobalt (II) ions, weakly active in the presence of nickel, copper (II) and zinc ions, and completely inactive in the presence of calcium ions. However, using calorimetry, we have observed the binding of two calcium ions to the free enzyme in a manner very similar to the binding of manganese ions. In the presence of iron (II) ions, we have obtained a cleavage of the continuous strands of a junction bound by endonuclease I, at sites close to (but not identical with) enzyme-induced hydrolysis. The results suggest that this arises from attack by locally generated hydroxyl radicals, arising from iron (II) ions bound into the active site. This therefore provides an indirect way of examining metal ion binding in the enzyme-junction complex. Ion binding in free protein (by calorimetry) and the enzyme-junction complex (iron-induced cleavage) have been studied in series of active-site mutants. Both confirm the importance of the three carboxylate ligands, and the lack of a requirement for Lys67 for the ion binding. Calorimetry points to particularly critical role of Asp55, as mutation completely abolishes all binding of both manganese and calcium ions.

DNA recognition by the EcoRV restriction endonuclease probed using base analogues

The EcoRV restriction endonuclease recognises palindromic GATATC sequences and cuts between the central T and dA bases in a reaction that has an absolute requirement for a divalent metal ion, physiologically Mg(2+). Use has been made of base analogues, which delete hydrogen bonds between the protein and DNA (or hydrophobic interactions in the case of the 5-CH(3) group of thymine), to evaluate the roles of the outer two base-pairs (GATATC) in DNA recognition. Selectivity arises at both the binding steps leading to the formation of the enzyme-DNA-metal ion ternary complex (assayed by measuring the dissociation constant in the presence of the non-reactive metal Ca(2+)) and the catalytic step (evaluated using single-turnover hydrolysis in the presence of Mg(2+)), with each protein-DNA contact contributing to recognition. With the A:T base-pair, binding was reduced by the amount expected for the simple loss of a single contact; much more severe effects were observed with the G:C base-pair, suggesting additional conformational perturbation. Most of the modified bases lowered the rate of hydrolysis; furthermore, the presence of an analogue in one strand of the duplex diminished cutting at the second, unmodified strand, indicative of communication between DNA binding and the active site. The essential metal ion Mg(2+) plays a key role in mediating interactions between the DNA binding site and active centre and in many instances rescue of hydrolysis was seen with Mn(2+). It is suggested that contacts between the GATATC site are required for tight binding and for the correct assembly of metal ions and bound water at the catalytic site, functions important in providing acid/base catalysis and transition state stabilisation.

Protein motion from non-specific to specific DNA by three-dimensional routes aided by supercoiling

DNA-binding proteins are generally thought to locate their target sites by first associating with the DNA at random and then translocating to the specific site by one-dimensional (1D) diffusion along the DNA. We report here that non-specific DNA conveys proteins to their target sites just as well when held near the target by catenation as when co-linear with the target. Hence, contrary to the prevalent view, proteins move from random to specific sites primarily by three-dimensional (3D) rather than 1D pathways, by multiple dissociation/re-association events within a single DNA molecule. We also uncover a role for DNA supercoiling in target-site location. Proteins find their sites more readily in supercoiled than in relaxed DNA, again indicating 3D rather than 1D routes.

Dynamic evidence for metal ion catalysis in the reaction mediated by a flap endonuclease

On the basis of structural work, metal ions are proposed to play a catalytic role in reactions mediated by many phosphoryl transfer enzymes. To gain dynamic support for such mechanisms, the role of metal ion cofactors in phosphate diester hydrolysis catalysed by a flap endonuclease has been studied. The pH maximal rate profiles were measured in the presence of various metal ion cofactors; in each case, a single ionic form of the enzyme/cofactor accounts for the pH dependence. The kinetic pK(a)s display good correlation with the acidity of the corresponding hexahydrated metal ions, which strongly suggests a role for metal-bound hydroxide, or its equivalent ionic species, in the reaction. Comparing rates of reaction in the pH-independent regions, a small negative beta(nuc) value is observed. This suggests that expected trends in the nucleophilicity of the various metal-bound hydroxides are balanced by a second form of metal ion catalysis that is related to the acidity of the hexahydrated metal ion. This is likely to be either electrophilic catalysis or leaving group activation.

Multiple metal ions drive DNA association by PvuII endonuclease

Restriction enzymes serve as important model systems for understanding the role of metal ions in phosphodiester hydrolysis. To this end, a number of laboratories have reported dramatic differences between the metal ion-dependent and metal ion-independent DNA binding behaviors of these systems. In an effort to illuminate the underlying mechanistic details which give rise to these differences, we have quantitatively dissected these equilibrium behaviors into component association and dissociation rates for the representative PvuII endonuclease and use these data to assess the stoichiometry of metal ion involvement in the binding process. The dependence of PvuII cognate DNA on Ca(II) concentration binding appears to be cooperative, exhibiting half-saturation at 0.6 mM metal ion and yielding an n(H) of 3.5 +/- 0.2 per enzyme homodimer. Using both nitrocellulose filter binding and fluorescence assays, we observe that the cognate DNA dissociation rate (k(-)(1) or k(off)) is very slow (10(-)(3) s(-)(1)) and exhibits a shallow dependence on metal ion concentration. DNA trap cleavage experiments with Mg(II) confirm the general irreversibility of DNA binding relative to cleavage, even at low metal ion concentrations. More dramatically, the association rate (k(1) or k(on)) also appears to be cooperative, increasing more than 100-fold between 0.2 and 10 mM Ca(II), with an optimum value of 2.7 x 10(7) M(-)(1) s (-)(1). Hill analysis of the metal ion dependence of k(on) indicates an n(H) of 3.6 +/- 0.2 per enzyme dimer. This value is consistent with the involvement in DNA association of two metal ions per subunit active site, a result which lends new strength to arguments for two-metal ion mechanisms in restriction enzymes.

PvuII-endonuclease induces structural alterations at the scissile phosphate group of its cognate DNA

We investigated the PvuII endonuclease with its cognate DNA by means of molecular dynamics simulations. Comparing the complexed DNA with a reference simulation of free DNA, we saw structural changes at the scissile phosphodiester bond. At this GpC step, the enzyme induces the highest twist and axial rise, inclination is increased and the minor groove widened. The distance between the scissile phosphate group and the phosphate group of the following thymine base is shortened significantly, indicating a substrate-assisted catalysis. A feasible reason for this vicinity is the catalytically important amino acid residue lysine 70, which bridges the free oxygen atoms of the successive phosphate groups. Due to this geometry, a compact reaction pocket is formed where a water molecule can be held, thus bringing the reaction partners for hydrolysis into contact. The O1-P-O2 angle of the scissile nucleotide is decreased, probably due to a complexation of the negative oxygen atoms through protein and solvent contacts.

Type II restriction endonucleases

Type II restriction endonucleases have emerged as important paradigms for the study of protein-nucleic acid interactions. This is due to their ability to catalyse phosphodiester bond cleavage with very large rate enhancements while also maintaining exquisite sequence selectivities. The principles and methods developed to analyze site-specific binding and catalysis for restriction endonucleases can be applied to other enzymes which also operate on nucleic acids. This paper reviews biochemical and structural approaches to characterization of these enzymes, with particular attention to the multiple crucial roles of divalent metal ions, the possibilities for use of alternative substrates in binding and catalytic experiments, the strategies for exploring the detailed chemistry of phosphoryl transfer, and the use of X-ray crystallography to provide descriptions of conformational pathways at specific, nonspecific, and noncognate DNA sites.

Electrostatic contributions to site specific DNA cleavage by EcoRV endonuclease

Mutational analysis of amino acids at the periphery of the EcoRV endonuclease active site suggests that moderate-range electrostatic effects play a significant role in modulating the efficiency of phosphoryl transfer. Asp36 and Lys38 located on minor-groove binding surface loops approach within 7-9 A of the scissile phosphates of the DNA. While the rates of single-site mutations removing the carboxylate or amine moieties at these positions are decreased 10(3)-10(5)-fold compared to that of wild-type EcoRV, we find that double mutants which rebalance the charge improve catalysis by up to 500-fold. Mutational analysis also suggests that catalytic efficiency is influenced by Lys173, which is buried at the base of a deep depression penetrating from a distal surface of the enzyme. The Lys173 amine group lies just 6 A from the amine group of the conserved essential Lys92 side chain in the active site. Kinetic and crystallographic analyses of the EcoRV E45A mutant enzyme further show that the Glu45 carboxylate group facilitates an extensive set of conformational transitions which occur upon DNA binding. The crystal structure of E45A bound to DNA and Mn2+ ions reveals significant conformational alterations in a small alpha-helical portion of the dimer interface located adjacent to the DNA minor groove. This leads to a tertiary reorientation of the two monomers as well as shifting of the key major-groove binding recognition loops. Because the Glu45 side chain does not appear to play a direct structural role in maintaining the active site, these rearrangements may instead originate in an altered electrostatic potential caused by removal of the negative charge. A Mn2+ binding site on the scissile phosphate is also disrupted in the E45A structure such that inner-sphere metal interactions made by the scissile DNA phosphate and conserved Asp90 carboxylate are each replaced with water molecules in the mutant. These findings argue against a proposed role for Asp36 as the general base in EcoRV catalysis, and reveal that the induced-fit conformational changes necessary for active site assembly and metal binding are significantly modulated by the electrostatic potential in this region.

Mutating conserved residues in the ribonuclease H domain of Ty3 reverse transcriptase affects specialized cleavage events

The reverse transcriptase-associated ribonuclease H (RT/RNase H) domains from the gypsy group of retrotransposons, of which Ty3 is a member, share considerable sequence homology with their retroviral counterparts. However, the gypsy elements have a conserved tyrosine (position 459 in Ty3 RT) instead of the conserved histidine in the catalytic center of retroviral RTs such as at position 539 of HIV-1. In addition, the gypsy group shows conservation of histidine adjacent to the third of the metal-chelating carboxylate residues, which is Asp-426 of Ty3 RT. The role of these and additional catalytic residues was assessed with purified recombinant enzymes and through the ability of Ty3 mutants to support transposition in Saccaromyces cerevisiae. Although all mutations had minimal impact on DNA polymerase function, amidation of Asp-358, Glu-401, and Asp-426 eliminated Mg(2+)- and Mn(2+)-dependent RNase H function. Replacing His-427 and Tyr-459 with Ala and Asp-469 with Asn resulted in reduced RNase H activity in the presence of Mg(2+), whereas in the presence of Mn(2+) these mutants displayed a lack of turnover. Despite this, mutations at all positions were lethal for transposition. To reconcile these apparently contradictory findings, the efficiency of specialized RNase H-mediated events was examined for each enzyme. Mutants retaining RNase H activity on a heteropolymeric RNA.DNA hybrid failed to support DNA strand transfer and release of the (+) strand polypurine tract primer from (+) RNA, suggesting that interrupting one or both of these events might account for the transposition defect.

Mechanisms of metal ion action in Tn10 transposition

Tn10/IS10 transposition involves assembly of a synaptic complex (or transpososome) in which two transposon ends are paired, followed by four distinct chemical steps at each transposon end. The chemical steps are dependent on the presence of a suitable divalent metal cation (Me(2+)). Transpososome assembly and structure are also affected by Me(2+). To gain further insight into the mechanisms of Me(2+) action in Tn10/IS10 transposition we have investigated the effects of substituting Mn(2+) for Mg(2+), the physiologic Me(2+), in transposition. We have also investigated the significance of an Me(2+)-assisted conformational change in transpososome structure. We show that Mn(2+) has two previously unrecognized effects on the Tn10 donor cleavage reaction. It accelerates the rates of hairpin formation and hairpin resolution without significantly affecting the rate of the first chemical step, first strand nicking. Mn(2+) also relaxes the specificity of first strand nicking. We also show that Me(2+)-assisted transpososome unfolding coincides with a structural transition in the transposon-donor junction that may be necessary for hairpin formation. Possible mechanisms for these observations are considered.

Pre-steady-state and stopped-flow fluorescence analysis of Escherichia coli ribonuclease III: insights into mechanism and conformational changes associated with binding and catalysis

To better understand substrate recognition and catalysis by RNase III, we examined steady-state and pre-steady-state reaction kinetics, and changes in intrinsic enzyme fluorescence. The multiple turnover cleavage of a model RNA substrate shows a pre-steady-state burst of product formation followed by a slower phase, indicating that the steady-state reaction rate is not limited by substrate cleavage. RNase III catalyzed hydrolysis is slower at low pH, permitting the use of pre-steady-state kinetics to measure the dissociation constant for formation of the enzyme-substrate complex (K(d)=5.4(+/-0.6) nM), and the rate constant for phosphodiester bond cleavage (k(c)=1.160(+/-0.001) min(-1), pH 5.4). Isotope incorporation analysis shows that a single solvent oxygen atom is incorporated into the 5' phosphate of the RNA product, which demonstrates that the cleavage step is irreversible. Analysis of the pH dependence of the single turnover rate constant, k(c), fits best to a model for two or more titratable groups with pK(a) of ca 5.6, suggesting a role for conserved acidic residues in catalysis. Additionally, we find that k(c) is dependent on the pK(a) value of the hydrated divalent metal ion included in the reaction, providing evidence for participation of a metal ion hydroxide in catalysis, potentially in developing the nucleophile for the hydrolysis reaction. In order to assess whether conformational changes also contribute to the enzyme mechanism, we monitored intrinsic tryptophan fluorescence. During a single round of binding and cleavage by the enzyme we detect a biphasic change in fluorescence. The rate of the initial increase in fluorescence was dependent on substrate concentration yielding a second-order rate constant of 1.0(+/-0.1)x10(8) M(-1) s(-1), while the rate constant of the second phase was concentration independent (6.4(+/-0.8) s(-1); pH 7.3). These data, together with the unique dependence of each phase on divalent metal ion identity and pH, support the hypothesis that the two fluorescence transitions, which we attribute to conformational changes, correlate with substrate binding and catalysis.

Many type IIs restriction endonucleases interact with two recognition sites before cleaving DNA

Type IIs restriction endonucleases recognize asymmetric DNA sequences and cleave both DNA strands at fixed positions, typically several base pairs away from the recognition site. These enzymes are generally monomers that transiently associate to form dimers to cleave both strands. Their reactions could involve bridging interactions between two copies of their recognition sequence. To examine this possibility, several type IIs enzymes were tested against substrates with either one or two target sites. Some of the enzymes cleaved the DNA with two target sites at the same rate as that with one site, but most cut their two-site substrate more rapidly than the one-site DNA. In some cases, the two sites were cut sequentially, at rates that were equal to each other but that exceeded the rate on the one-site DNA. In another case, the DNA with two sites was cleaved rapidly at one site, but the residual site was cleaved at a much slower rate. In a further example, the two sites were cleaved concertedly to give directly the final products cut at both sites. Many type IIs enzymes thus interact with two copies of their recognition sequence before cleaving DNA, although via several different mechanisms.

Probing the general base catalysis in the first step of BamHI action by computer simulations

BamHI is a type II restriction endonuclease that catalyzes the scission of the phoshodiester bond in the GAGTCC cognate sequence in the presence of two divalent metal ions. The first step of the reaction is the preparation of water for nucleophilic attack by Glu-113, which has been proposed to abstract the proton from the attacking water molecule. Alternatively, the 3'-phosphate group to the susceptible phosphodiester bond has been suggested to play a role as the general base. The two hypotheses have been tested by computer simulations using the semiempirical protein dipoles Langevin dipoles (PDLD/S) method. Deprotonation of water by Glu-113 has been found to be less favorable by 5.7 kcal/mol than metal-catalyzed deprotonation with a concomitant proton transfer to bulk solvent. The preparation of the nucleophile by the 3'-phosphate group is less favorable by 12.3 kcal/mol. These results suggest that both the general base and the substrate-assisted mechanisms in the first step of BamHI action are less likely than the metal-catalyzed reaction. The metal ions in the active site of BamHI make the largest contributions to the reduction of the free energy of hydroxide ion formation. On the basis of these findings we propose that the first step of endonuclease catalysis does not require a general base; rather, the essential attacking nucleophile in BamHI catalytic action is stabilized by the metal ions.

Structure and function of type II restriction endonucleases

More than 3000 type II restriction endonucleases have been discovered. They recognize short, usually palindromic, sequences of 4-8 bp and, in the presence of Mg(2+), cleave the DNA within or in close proximity to the recognition sequence. The orthodox type II enzymes are homodimers which recognize palindromic sites. Depending on particular features subtypes are classified. All structures of restriction enzymes show a common structural core comprising four beta-strands and one alpha-helix. Furthermore, two families of enzymes can be distinguished which are structurally very similar (EcoRI-like enzymes and EcoRV-like enzymes). Like other DNA binding proteins, restriction enzymes are capable of non-specific DNA binding, which is the prerequisite for efficient target site location by facilitated diffusion. Non-specific binding usually does not involve interactions with the bases but only with the DNA backbone. In contrast, specific binding is characterized by an intimate interplay between direct (interaction with the bases) and indirect (interaction with the backbone) readout. Typically approximately 15-20 hydrogen bonds are formed between a dimeric restriction enzyme and the bases of the recognition sequence, in addition to numerous van der Waals contacts to the bases and hydrogen bonds to the backbone, which may also be water mediated. The recognition process triggers large conformational changes of the enzyme and the DNA, which lead to the activation of the catalytic centers. In many restriction enzymes the catalytic centers, one in each subunit, are represented by the PD. D/EXK motif, in which the two carboxylates are responsible for Mg(2+) binding, the essential cofactor for the great majority of enzymes. The precise mechanism of cleavage has not yet been established for any enzyme, the main uncertainty concerns the number of Mg(2+) ions directly involved in cleavage. Cleavage in the two strands usually occurs in a concerted fashion and leads to inversion of configuration at the phosphorus. The products of the reaction are DNA fragments with a 3'-OH and a 5'-phosphate.

Structure of Hjc, a Holliday junction resolvase, from Sulfolobus solfataricus

The 2.15-A structure of Hjc, a Holliday junction-resolving enzyme from the archaeon Sulfolobus solfataricus, reveals extensive structural homology with a superfamily of nucleases that includes type II restriction enzymes. Hjc is a dimer with a large DNA-binding surface consisting of numerous basic residues surrounding the metal-binding residues of the active sites. Residues critical for catalysis, identified on the basis of sequence comparisons and site-directed mutagenesis studies, are clustered to produce two active sites in the dimer, about 29 A apart, consistent with the requirement for the introduction of paired nicks in opposing strands of the four-way DNA junction substrate. Hjc displays similarity to the restriction endonucleases in the way its specific DNA-cutting pattern is determined but uses a different arrangement of nuclease subunits. Further structural similarity to a broad group of metal/phosphate-binding proteins, including conservation of active-site location, is observed. A high degree of conservation of surface electrostatic character is observed between Hjc and T4-phage endonuclease VII despite a complete lack of structural homology. A model of the Hjc-Holliday junction complex is proposed, based on the available functional and structural data.