Probing the kinetics of formation of the bacteriophage MS2 translational operator complex: identification of a protein conformer unable to bind RNA

Optimizing the synthesis and purification of MS2 virus like particles

Introducing bacteriophage MS2 virus-like particles (VLPs) as gene and drug delivery tools increases the demand for optimizing their production and purification procedure. PEG precipitation method is used efficiently to purify VLPs, while the effects of pH and different electrolytes on the stability, size, and homogeneity of purified MS2 VLPs, and the encapsulated RNA sequences remained to be elucidated. In this regard, a vector, capable of producing VLP with an shRNA packed inside was prepared. The resulting VLPs in different buffers/solutions were assessed for their size, polydispersity index, and ability to protect the enclosed shRNA. We report that among Tris, HEPES, and PBS, with or without NaNO3, and also NaNO3 alone in different pH and ionic concentrations, the 100 mM NaNO3-Tris buffer with pH:8 can be used as a new and optimal MS2 VLP production buffer, capable of inhibiting the VLPs aggregation. These VLPs show a size range of 27-30 nm and suitable homogeneity with minimum 12-month stability at 4 °C. Moreover, the resulting MS2 VLPs were highly efficient and stable for at least 48 h in conditions similar to in vivo. These features of MS2 VLPs produced in the newly introduced buffer make them an appropriate candidate for therapeutic agents' delivery.

Approaches for measuring the dynamics of RNA-protein interactions

RNA-protein interactions are pivotal for the regulation of gene expression from bacteria to human. RNA-protein interactions are dynamic; they change over biologically relevant timescales. Understanding the regulation of gene expression at the RNA level therefore requires knowledge of the dynamics of RNA-protein interactions. Here, we discuss the main experimental approaches to measure dynamic aspects of RNA-protein interactions. We cover techniques that assess dynamics of cellular RNA-protein interactions that accompany biological processes over timescales of hours or longer and techniques measuring the kinetic dynamics of RNA-protein interactions in vitro. This article is categorized under: RNA Interactions with Proteins and Other Molecules > Protein-RNA Interactions: Functional Implications RNA Interactions with Proteins and Other Molecules > Protein-RNA Recognition RNA Interactions with Proteins and Other Molecules > RNA-Protein Complexes RNA Evolution and Genomics > Ribonomics.

RNA-Mediated Virus Assembly: Mechanisms and Consequences for Viral Evolution and Therapy

Viruses, entities composed of nucleic acids, proteins, and in some cases lipids lack the ability to replicate outside their target cells. Their components self-assemble at the nanoscale with exquisite precision-a key to their biological success in infection. Recent advances in structure determination and the development of biophysical tools such as single-molecule spectroscopy and noncovalent mass spectrometry allow unprecedented access to the detailed assembly mechanisms of simple virions. Coupling these techniques with mathematical modeling and bioinformatics has uncovered a previously unsuspected role for genomic RNA in regulating formation of viral capsids, revealing multiple, dispersed RNA sequence/structure motifs [packaging signals (PSs)] that bind cognate coat proteins cooperatively. The PS ensemble controls assembly efficiency and accounts for the packaging specificity seen in vivo. The precise modes of action of the PSs vary between viral families, but this common principle applies across many viral families, including major human pathogens. These insights open up the opportunity to block or repurpose PS function in assembly for both novel antiviral therapy and gene/drug/vaccine applications.

RNA Virus Evolution via a Quasispecies-Based Model Reveals a Drug Target with a High Barrier to Resistance

The rapid occurrence of therapy-resistant mutant strains provides a challenge for anti-viral therapy. An ideal drug target would be a highly conserved molecular feature in the viral life cycle, such as the packaging signals in the genomes of RNA viruses that encode an instruction manual for their efficient assembly. The ubiquity of this assembly code in RNA viruses, including major human pathogens, suggests that it confers selective advantages. However, their impact on viral evolution cannot be assessed in current models of viral infection that lack molecular details of virus assembly. We introduce here a quasispecies-based model of a viral infection that incorporates structural and mechanistic knowledge of packaging signal function in assembly to construct a phenotype-fitness map, capturing the impact of this RNA code on assembly yield and efficiency. Details of viral replication and assembly inside an infected host cell are coupled with a population model of a viral infection, allowing the occurrence of therapy resistance to be assessed in response to drugs inhibiting packaging signal recognition. Stochastic simulations of viral quasispecies evolution in chronic HCV infection under drug action and/or immune clearance reveal that drugs targeting all RNA signals in the assembly code collectively have a high barrier to drug resistance, even though each packaging signal in isolation has a lower barrier than conventional drugs. This suggests that drugs targeting the RNA signals in the assembly code could be promising routes for exploitation in anti-viral drug design.

A Model for Viral Assembly around an Explicit RNA Sequence Generates an Implicit Fitness Landscape

Previously, a stochastic model of single-stranded RNA virus assembly was created to model the cooperative effects between capsid proteins and genomic RNA that would occur in a packaging signal-mediated assembly process. In such an assembly scenario, multiple secondary structural elements from within the RNA, termed "packaging signals" (PS), contact coat proteins and facilitate efficient capsid assembly. In this work, the assembly model is extended to incorporate explicit nucleotide sequence information as well as simple aspects of RNA folding that would be occurring during the RNA/capsid coassembly process. Applying this paradigm to a dodecahedral viral capsid, a computer-derived nucleotide sequence is evolved de novo that is optimal for packaging the RNA into capsids, while also containing capacity for coding for a viral protein. Analysis of the effects of mutations on the ability of the RNA sequence to successfully package into a viral capsid reveals a complex fitness landscape where the majority of mutations are neutral with respect to packaging efficiency with a small number of mutations resulting in a near-complete loss of RNA packaging. Moreover, the model shows how attempts to ablate PSs in the viral RNA sequence may result in redundant PSs already present in the genome fulfilling their packaging role. This explains why recent experiments that attempt to ablate putative PSs may not see an effect on packaging. This modeling framework presents an example of how an implicit mapping can be made from genotype to a fitness parameter important for viral biology, i.e., viral capsid yield, with potential applications to theoretical models of viral evolution.

Direct Evidence for Packaging Signal-Mediated Assembly of Bacteriophage MS2

Using cross-linking coupled to matrix-assisted laser desorption/ionization mass spectrometry and CLIP-Seq sequencing, we determined the peptide and oligonucleotide sequences at the interfaces between the capsid proteins and the genomic RNA of bacteriophage MS2. The results suggest that the same coat protein (CP)-RNA and maturation protein (MP)-RNA interfaces are used in every viral particle. The portions of the viral RNA in contact with CP subunits span the genome, consistent with a large number of discrete and similar contacts within each particle. Many of these sites match previous predictions of the locations of multiple, dispersed and degenerate RNA sites with cognate CP affinity termed packaging signals (PSs). Chemical RNA footprinting was used to compare the secondary structures of protein-free genomic fragments and the RNA in the virion. Some PSs are partially present in protein-free RNA but others would need to refold from their dominant solution conformations to form the contacts identified in the virion. The RNA-binding peptides within the MP map to two sections of the N-terminal half of the protein. Comparison of MP sequences from related phages suggests a similar arrangement of RNA-binding sites, although these N-terminal regions have only limited sequence conservation. In contrast, the sequences of the C-termini are highly conserved, consistent with them encompassing pilin-binding domains required for initial contact with host cells. These results provide independent and unambiguous support for the assembly of MS2 virions via a PS-mediated mechanism involving a series of induced-fit viral protein interactions with RNA.

A novel delivery platform based on Bacteriophage MS2 virus-like particles

•

Here we reviewed Bacteriophage MS2 virus-like particles, including introduction to their structure, their potential as a delivery platform, and their expected use in medicine and other fields.

•

Bacteriophage MS2 virus-like particles represent the novel delivery platform.

•

Bacteriophage MS2 virus-like particles possess promising application prospect.

Our objective here is to review the novel delivery platform based on Bacteriophage MS2 virus-like particles (VLPs), including introduction to their structure, their potential as a delivery platform, and their expected use in medicine and other fields. Bacteriophage MS2 VLPs are nanoparticles devoid of viral genetic material and can self-assemble from the coat protein into an icosahedral capsid. As a novel delivery platform, they possess numerous features that make them suitable and attractive for targeted delivery of RNAs or DNAs, epitope peptides, and drugs within the protein capsid. In short, as a novel delivery platform, MS2 VLPs are suitable for delivery of targeted agents and hold promise for use in diagnostics, vaccines, and therapeutic modalities.

Evaluating the dual target binding capabilities of immobilized aptamers using flow cytometry

In the current study, the authors quantify the binding activity of particle-immobilized DNA aptamers to their nucleotide and non-nucleotide targets. For the purposes of this work, DNA and vascular endothelial growth factor (VEGF) binding analysis was carried out for VEGF-binding aptamers and compared to that of an ampicillin-binding aptamer as well as a non-aptamer DNA probe. Binding analysis followed incubation of one target type, coincubation of both DNA and VEGF targets, and serial incubations of each target type. Moreover, recovery of aptamer binding activity following displacement of the DNA target from aptamer:DNA duplexes was also explored. Flow cytometry served as the quantitative tool to directly monitor binding events of both the DNA target and protein target to the various aptamer and non-aptamer functionalized particles. The current work demonstrates how processing steps such as annealing and binding history of particle-immobilized aptamers can affect subsequent binding activity. To this end, the authors demonstrate the ability to fully recover DNA target binding activity capabilities and to partially recover protein target binding activity.

Solving a Levinthal's paradox for virus assembly identifies a unique antiviral strategy

One of the important puzzles in virology is how viruses assemble the protein containers that package their genomes rapidly and efficiently in vivo while avoiding triggering their hosts' antiviral defenses. Viral assembly appears directed toward a relatively small subset of the vast number of all possible assembly intermediates and pathways, akin to Levinthal's paradox for the folding of polypeptide chains. Using an in silico assembly model, we demonstrate that this reduction in complexity can be understood if aspects of in vivo assembly, which have mostly been neglected in in vitro experimental and theoretical modeling assembly studies, are included in the analysis. In particular, we show that the increasing viral coat protein concentration that occurs in infected cells plays unexpected and vital roles in avoiding potential kinetic assembly traps, significantly reducing the number of assembly pathways and assembly initiation sites, and resulting in enhanced assembly efficiency and genome packaging specificity. Because capsid assembly is a vital determinant of the overall fitness of a virus in the infection process, these insights have important consequences for our understanding of how selection impacts on the evolution of viral quasispecies. These results moreover suggest strategies for optimizing the production of protein nanocontainers for drug delivery and of virus-like particles for vaccination. We demonstrate here in silico that drugs targeting the specific RNA-capsid protein contacts can delay assembly, reduce viral load, and lead to an increase of misencapsidation of cellular RNAs, hence opening up unique avenues for antiviral therapy.

Recognition modes of RNA tetraloops and tetraloop-like motifs by RNA-binding proteins

RNA hairpins are the most commonly occurring secondary structural elements in RNAs and serve as nucleation sites for RNA folding, RNA-RNA, and RNA-protein interactions. RNA hairpins are frequently capped by tetraloops, and based on sequence similarity, three broad classes of RNA tetraloops have been defined: GNRA, UNCG, and CUYG. Other classes such as the UYUN tetraloop in histone mRNAs, the UGAA in 16S rRNA, the AUUA tetraloop from the MS2 bacteriophage, and the AGNN tetraloop that binds RNase III have also been characterized. The tetraloop structure is compact and is usually characterized by a paired interaction between the first and fourth nucleotides. The two unpaired nucleotides in the loop are usually involved in base-stacking or base-phosphate hydrogen bonding interactions. Several structures of RNA tetraloops, free and complexed to other RNAs or proteins, are now available and these studies have increased our understanding of the diverse mechanisms by which this motif is recognized. RNA tetraloops can mediate RNA-RNA contacts via the tetraloop-receptor motif, kissing hairpin loops, A-minor interactions, and pseudoknots. While these RNA-RNA interactions are fairly well understood, how RNA-binding proteins recognize RNA tetraloops and tetraloop-like motifs remains unclear. In this review, we summarize the structures of RNA tetraloop-protein complexes and the general themes that have emerged on sequence- and structure-specific recognition of RNA tetraloops. We highlight how proteins achieve molecular recognition of this nucleic acid motif, the structural adaptations observed in the tetraloop to accommodate the protein-binding partner, and the role of dynamics in recognition.

Packaging signals in two single-stranded RNA viruses imply a conserved assembly mechanism and geometry of the packaged genome

The current paradigm for assembly of single-stranded RNA viruses is based on a mechanism involving non-sequence-specific packaging of genomic RNA driven by electrostatic interactions. Recent experiments, however, provide compelling evidence for sequence specificity in this process both in vitro and in vivo. The existence of multiple RNA packaging signals (PSs) within viral genomes has been proposed, which facilitates assembly by binding coat proteins in such a way that they promote the protein-protein contacts needed to build the capsid. The binding energy from these interactions enables the confinement or compaction of the genomic RNAs. Identifying the nature of such PSs is crucial for a full understanding of assembly, which is an as yet untapped potential drug target for this important class of pathogens. Here, for two related bacterial viruses, we determine the sequences and locations of their PSs using Hamiltonian paths, a concept from graph theory, in combination with bioinformatics and structural studies. Their PSs have a common secondary structure motif but distinct consensus sequences and positions within the respective genomes. Despite these differences, the distributions of PSs in both viruses imply defined conformations for the packaged RNA genomes in contact with the protein shell in the capsid, consistent with a recent asymmetric structure determination of the MS2 virion. The PS distributions identified moreover imply a preferred, evolutionarily conserved assembly pathway with respect to the RNA sequence with potentially profound implications for other single-stranded RNA viruses known to have RNA PSs, including many animal and human pathogens.

A new paradigm for the roles of the genome in ssRNA viruses

Recent work with RNA phages and an ssRNA plant satellite virus challenges the widely held view that the sequences and structures of genomic RNAs are unimportant for virion assembly. In the T=3 phages, RNA–coat protein interactions occur throughout the genome, defining the quasiconformers of their protein shells. In the plant virus, there are multiple packaging signals dispersed throughout the genome that overcome electrostatic barriers to protein self-assembly. Both viral coat proteins cause the solution structures of their cognate genomes to collapse into a form that is readily encapsidated in a two-stage assembly process. Such similar behavior in two structurally unrelated viral protein folds implies that this might be a conserved feature of many viral assembly reactions. These results suggest a highly defined structure for the RNA in the virions, consistent with recent structural studies. They also have implications both for subsequent genome release during infection and for the evolution of viral sequences.

Building a viral capsid in the presence of genomic RNA

Virus capsid assembly has traditionally been considered as a process that can be described primarily via self-assembly of the capsid proteins, neglecting interactions with other viral or cellular components. Our recent work on several ssRNA viruses, a major class of viral pathogens containing important human, animal, and plant viruses, has shown that this protein-centric view is too simplistic. Capsid assembly for these viruses relies strongly on a number of cooperative roles played by the genomic RNA. This realization requires a new theoretical framework for the modeling and prediction of the assembly behavior of these viruses. In a seminal paper Zlotnick [J. Mol. Biol. 241, 59 (1994)] laid the foundations for the modeling of capsid assembly as a protein-only self-assembly process, illustrating his approach using the example of a dodecahedral study system. We describe here a generalized framework for modeling assembly that incorporates the regulatory functions provided by cognate protein-nucleic-acid interactions between capsid proteins and segments of the genomic RNA, called packaging signals, into the model. Using the same dodecahedron system we demonstrate, using a Gillespie-type algorithm to deal with the enhanced complexity of the problem instead of a master equation approach, that assembly kinetics and yield strongly depend on the distribution and nature of the packaging signals, highlighting the importance of the crucial roles of the RNA in this process.

Engineered mutations change the structure and stability of a virus-like particle

The single-coat protein (CP) of bacteriophage Qβ self-assembles into T = 3 icosahedral virus-like particles (VLPs), of interest for a wide range of applications. These VLPs are very stable, but identification of the specific molecular determinants of this stability is lacking. To investigate these determinants along with manipulations that confer more capabilities to our VLP material, we manipulated the CP primary structure to test the importance of various putative stabilizing interactions. Optimization of a procedure to incorporate fused CP subunits allowed for good control over the average number of covalent dimers in each VLP. We confirmed that the disulfide linkages are the most important stabilizing elements for the capsid and that acidic conditions significantly enhance the resistance of VLPs to thermal degradation. Interdimer interactions were found to be less important for VLP assembly than intradimer interactions. Finally, a single point mutation in the CP resulted in a population of smaller VLPs in three distinct structural forms.

A perspective of the dynamic structure of the nucleus explored at the single-molecule level

Cellular life can be described as a dynamic equilibrium of a highly complex network of interacting molecules. For this reason, it is no longer sufficient to “only” know the identity of the participants in a cellular process, but questions such as where, when, and for how long also have to be addressed to understand the mechanism being investigated. Additionally, ensemble measurements may not sufficiently describe individual steps of molecular mobility, spatial-temporal resolution, kinetic parameters, and geographical mapping. It is vital to investigate where individual steps exactly occur to enhance our understanding of the living cell. The nucleus, home too many highly complex multi-order processes, such as replication, transcription, splicing, etc., provides a complicated, heterogeneous landscape. Its dynamics were studied to a new level of detail by fluorescence correlation spectroscopy (FCS). Single-molecule tracking, while still in its infancy in cell biology, is becoming a more and more attractive method to deduce key elements of this organelle. Here we discuss the potential of tracking single RNAs and proteins in the nucleus. Their dynamics, localization, and interaction rates will be vital to our understanding of cellular life. To demonstrate this, we provide a review of the HIV life cycle, which is an extremely elegant balance of nuclear and cytoplasmic functions and provides an opportunity to study mechanisms deeply integrated within the structure of the nucleus. In summary, we aim to present a specific, dynamic view of nuclear cellular life based on single molecule and FCS data and provide a prospective for the future.

A Fast and Robust Poisson-Boltzmann Solver Based on Adaptive Cartesian Grids

An adaptive Cartesian grid (ACG) concept is presented for the fast and robust numerical solution of the 3D Poisson-Boltzmann Equation (PBE) governing the electrostatic interactions of large-scale biomolecules and highly charged multi-biomolecular assemblies such as ribosomes and viruses. The ACG offers numerous advantages over competing grid topologies such as regular 3D lattices and unstructured grids. For very large biological molecules and multi-biomolecule assemblies, the total number of grid-points is several orders of magnitude less than that required in a conventional lattice grid used in the current PBE solvers thus allowing the end user to obtain accurate and stable nonlinear PBE solutions on a desktop computer. Compared to tetrahedral-based unstructured grids, ACG offers a simpler hierarchical grid structure, which is naturally suited to multigrid, relieves indirect addressing requirements and uses fewer neighboring nodes in the finite difference stencils. Construction of the ACG and determination of the dielectric/ionic maps are straightforward, fast and require minimal user intervention. Charge singularities are eliminated by reformulating the problem to produce the reaction field potential in the molecular interior and the total electrostatic potential in the exterior ionic solvent region. This approach minimizes grid-dependency and alleviates the need for fine grid spacing near atomic charge sites. The technical portion of this paper contains three parts. First, the ACG and its construction for general biomolecular geometries are described. Next, a discrete approximation to the PBE upon this mesh is derived. Finally, the overall solution procedure and multigrid implementation are summarized. Results obtained with the ACG-based PBE solver are presented for: (i) a low dielectric spherical cavity, containing interior point charges, embedded in a high dielectric ionic solvent - analytical solutions are available for this case, thus allowing rigorous assessment of the solution accuracy; (ii) a pair of low dielectric charged spheres embedded in a ionic solvent to compute electrostatic interaction free energies as a function of the distance between sphere centers; (iii) surface potentials of proteins, nucleic acids and their larger-scale assemblies such as ribosomes; and (iv) electrostatic solvation free energies and their salt sensitivities - obtained with both linear and nonlinear Poisson-Boltzmann equation - for a large set of proteins. These latter results along with timings can serve as benchmarks for comparing the performance of different PBE solvers.

Visualising a viral RNA genome poised for release from its receptor complex

We describe the cryo-electron microscopy structure of bacteriophage MS2 bound to its receptor, the bacterial F-pilus. The virus contacts the pilus at a capsid 5-fold vertex, thus locating the surface-accessible portion of the single copy of the pilin-binding maturation protein present in virions. This arrangement allows a 5-fold averaged map to be calculated, showing for the first time in any virus-receptor complex the nonuniform distribution of RNA within the capsid. Strikingly, at the vertex that contacts the pilus, a rod of density that may include contributions from both genome and maturation protein sits above a channel that goes through the capsid to the outside. This density is reminiscent of the DNA density observed in the exit channel of double-stranded DNA phages, suggesting that the RNA-maturation protein complex is poised to leave the capsid as the first step of the infection process.

Simple rules for efficient assembly predict the layout of a packaged viral RNA

Single-stranded RNA (ssRNA) viruses, which include major human pathogens, package their genomes as they assemble their capsids. We show here that the organization of the viral genomes within the capsids provides intriguing insights into the highly cooperative nature of the assembly process. A recent cryo-electron microscopy structure of bacteriophage MS2, determined with only 5-fold symmetry averaging, has revealed the asymmetric distribution of its encapsidated genome. Here we show that this RNA distribution is consistent with an assembly mechanism that follows two simple rules derived from experiment: (1) the binding of the MS2 maturation protein to the RNA constrains its conformation into a loop, and (2) the capsid must be built in an energetically favorable way. These results provide a new level of insight into the factors that drive efficient assembly of ssRNA viruses in vivo.

Determining the topology of virus assembly intermediates using ion mobility spectrometry-mass spectrometry

We have combined ion mobility spectrometry-mass spectrometry with tandem mass spectrometry to characterise large, non-covalently bound macromolecular complexes in terms of mass, shape (cross-sectional area) and stability (dissociation) in a single experiment. The results indicate that the quaternary architecture of a complex influences its residual shape following removal of a single subunit by collision-induced dissociation tandem mass spectrometry. Complexes whose subunits are bound to several neighbouring subunits to create a ring-like three-dimensional (3D) architecture undergo significant collapse upon dissociation. In contrast, subunits which have only a single neighbouring subunit within a complex retain much of their original shape upon complex dissociation. Specifically, we have determined the architecture of two transient, on-pathway intermediates observed during in vitro viral capsid assembly. Knowledge of the mass, stoichiometry and cross-sectional area of each viral assembly intermediate allowed us to model a range of potential structures based on the known X-ray structure of the coat protein building blocks. Comparing the cross-sectional areas of these potential architectures before and after dissociation provided tangible evidence for the assignment of the topologies of the complexes, which have been found to encompass both the 3-fold and the 5-fold symmetry axes of the final icosahedral viral shell. Such insights provide unique information about virus assembly pathways that could allow the design of anti-viral therapeutics directed at the assembly step. This methodology can be readily applied to the structural characterisation of many other non-covalently bound macromolecular complexes and their assembly pathways.

Mutually-induced conformational switching of RNA and coat protein underpins efficient assembly of a viral capsid

Single-stranded RNA viruses package their genomes into capsids enclosing fixed volumes. We assayed the ability of bacteriophage MS2 coat protein to package large, defined fragments of its genomic, single-stranded RNA. We show that the efficiency of packaging into a T=3 capsid in vitro is inversely proportional to RNA length, implying that there is a free-energy barrier to be overcome during assembly. All the RNAs examined have greater solution persistence lengths than the internal diameter of the capsid into which they become packaged, suggesting that protein-mediated RNA compaction must occur during assembly. Binding ethidium bromide to one of these RNA fragments, which would be expected to reduce its flexibility, severely inhibited packaging, consistent with this idea. Cryo-EM structures of the capsids assembled in these experiments with the sub-genomic RNAs show a layer of RNA density beneath the coat protein shell but lack density for the inner RNA shell seen in the wild-type virion. The inner layer is restored when full-length virion RNA is used in the assembly reaction, implying that it becomes ordered only when the capsid is filled, presumably because of the effects of steric and/or electrostatic repulsions. The cryo-EM results explain the length dependence of packaging. In addition, they show that for the sub-genomic fragments the strongest ordered RNA density occurs below the coat protein dimers forming the icosahedral 5-fold axes of the capsid. There is little such density beneath the proteins at the 2-fold axes, consistent with our model in which coat protein dimers binding to RNA stem-loops located at sites throughout the genome leads to switching of their preferred conformations, thus regulating the placement of the quasi-conformers needed to build the T=3 capsid. The data are consistent with mutual chaperoning of both RNA and coat protein conformations, partially explaining the ability of such viruses to assemble so rapidly and accurately.

The impact of viral RNA on the association rates of capsid protein assembly: bacteriophage MS2 as a case study

A large number of single-stranded RNA viruses, which form a major class of all viruses, co-assemble their protein container and their genomic material. The multiple roles of the viral genome in this process are presently only partly understood. Recent experimental results indicate that RNA, in addition to its function as a repository for genetic information, could play important functional roles during the assembly of the viral protein containers. An investigation of the impact of genomic RNA on the association of the protein subunits may therefore provide further insights into the mechanism of virus assembly. We study here the impact of viral RNA on the association rates of the capsid proteins during virus assembly. As a case study, we consider the viral capsid of bacteriophage MS2, which is formed from 60 asymmetric (AB) and 30 symmetric (CC) protein dimers. Using Brownian dynamics simulations, we investigate the effect of the binding of an RNA stem-loop (the translational repressor) on the association rates of the capsid protein dimers. Our analysis shows that translational repressor binding results in self-association of AB dimers being inhibited, whilst association of AB with CC dimers is greatly enhanced. This provides an explanation for experimental results in which an alternating assembly pattern of AB and CC dimer addition to the growing assembly intermediate has been observed to be the dominant mode of assembly. The presence of the RNA hence dramatically decreases the number of dominant assembly pathways and thereby reduces the complexity of the self-assembly process of these viruses.

All-atom normal-mode analysis reveals an RNA-induced allostery in a bacteriophage coat protein

Assembly of the T=3 bacteriophage MS2 is initiated by the binding of a 19 nucleotide RNA stem loop from within the phage genome to a symmetric coat protein dimer. This binding event effects a folding of the FG loop in one of the protein subunits of the dimer and results in the formation of an asymmetric dimer. Since both the symmetric and asymmetric forms of the dimer are needed for the assembly of the protein container, this allosteric switch plays an important role in the life cycle of the phage. We provide here details of an all-atom normal-mode analysis of this allosteric effect. The results suggest that asymmetric contacts between the A -duplex RNA phosphodiester backbone of the stem loop with the EF loop in one coat protein subunit results in an increased dynamic behavior of its FG loop. The four lowest-frequency modes, which encompass motions predominantly on the FG loops, account for over 90% of the increased dynamic behavior due to a localization of the vibrational pattern on a single FG loop. Finally, we show that an analysis of the allosteric effect using an elastic network model fails to predict this localization effect, highlighting the importance of using an all-atom full force field method for this problem.

Viral genomic single-stranded RNA directs the pathway toward a T=3 capsid

The molecular mechanisms controlling genome packaging by single-stranded RNA viruses are still largely unknown. It is necessary in most cases for the protein to adopt different conformations at different positions on the capsid lattice in order to form a viral capsid from multiple copies of a single protein. We showed previously that such quasi-equivalent conformers of RNA bacteriophage MS2 coat protein dimers (CP(2)) can be switched by sequence-specific interaction with a short RNA stem-loop (TR) that occurs only once in the wild-type phage genome. In principle, multiple switching events are required to generate the phage T=3 capsid. We have therefore investigated the sequence dependency of this event using two RNA aptamer sequences selected to bind the phage coat protein and an analogous packaging signal from phage Qbeta known to be discriminated against by MS2 coat protein both in vivo and in vitro. All three non-cognate stem-loops support T=3 shell formation, but none shows the kinetic-trapping effect seen when TR is mixed with equimolar CP(2). We show that this reflects the fact that they are poor ligands compared with TR, failing to saturate the coat protein under the assay conditions, ensuring that sufficient amounts of both types of dimer required for efficient assembly are present in these reactions. Increasing the non-cognate RNA concentration restores the kinetic trap, confirming this interpretation. We have also assessed the effects of extending the TR stem-loop at the 5' or 3' end with short genomic sequences. These longer RNAs all show evidence of the kinetic trap, reflecting the fact that they all contain the TR sequence and are more efficient at promoting capsid formation than TR. Mass spectrometry has shown that at least two pathways toward the T=3 shell occur in TR-induced assembly reactions: one via formation of a 3-fold axis and another that creates an extended 5-fold complex. The longer genomic RNAs suppress the 5-fold pathway, presumably as a consequence of steric clashes between multiply bound RNAs. Reversing the orientation of the extension sequences with respect to the TR stem-loop produces RNAs that are poor assembly initiators. The data support the idea that RNA-induced protein conformer switching occurs throughout assembly of the T=3 shell and show that both positional and sequence-specific effects outside the TR stem-loop can have significant impacts on the precise assembly pathway followed.

Biophysical characterization of DNA aptamer interactions with vascular endothelial growth factor

The binding of a DNA aptamer (5'-CCGTCTTCCAGACAAGAGTGCAGGG-3') to recombinant human vascular endothelial growth factor (VEGF(165)) was characterized using surface plasmon resonance (SPR), fluorescence anisotropy and isothermal titration calorimetry (ITC). Results from both fluorescence anisotropy and ITC indicated that a single aptamer molecule binds to each VEGF homodimer, unlike other VEGF inhibitors that exhibit 2(ligand):1(VEGF homodimer) stoichiometry. In addition, ITC revealed that the association of the aptamer to VEGF at 20 degrees C is enthalpically driven, with an unfavorable entropy contribution. SPR kinetic studies, with careful control of possible mass transfer effects, demonstrated that the aptamer binds to VEGF with an association rate constant k(on) = 4.79 +/- 0.03 x 10(4) M(-1) s(-1) and a dissociation rate constant k(off) = 5.21 +/- 0.02 x 10(-4) s(-1) at 25 degrees C. Key recognition hot-spots were determined by a combination of aptamer sequence substitutions, truncations, and extensions. Most single-nucleotide substitutions, particularly within an mfold-predicted stem, suppress binding, whereas those within a predicted loop have a minimal effect. The 5'-end of the aptamer plays a key role in VEGF recognition, as a single-nucleotide truncation abolished VEGF binding. Conversely, an 11-fold increase in the association rate (and affinity) is observed with a single cytosine nucleotide extension, due to pairing of the 3'-GGG with 5'-CCC in the extended aptamer. Our approach effectively maps the secondary structural elements in the free aptamer, which present the unpaired interface for high affinity VEGF recognition. These data demonstrate that a directed binding analysis can be used in concert with library screening to characterize and improve aptamer/ligand recognition.

Single-molecule fluorescence resonance energy transfer assays reveal heterogeneous folding ensembles in a simple RNA stem-loop

We have examined the folding ensembles present in solution for a series of RNA oligonucleotides that encompass the replicase translational operator stem-loop of the RNA bacteriophage MS2. Single-molecule (SM) fluorescence assays suggest that these RNAs exist in solution as ensembles of differentially base-paired/base-stacked states at equilibrium. There are two distinct ensembles for the wild-type sequence, implying the existence of a significant free energy barrier between "folded" and "unfolded" ensembles. Experiments with sequence variants are consistent with an unfolding mechanism in which interruptions to base-paired duplexes, in this example by the single-stranded loop and a single-base bulge in the base-paired stem, as well as the free ends, act as nucleation points for unfolding. The switch between folded and unfolded ensembles is consistent with a transition that occurs when all base-pairing and/or base-stacking interactions that would orientate the legs of the RNA stem are broken. Strikingly, a U-to-C replacement of a residue in the loop, which creates a high-affinity form of the operator for coat protein binding, results in dramatically different (un)folding behaviour, revealing distinct subpopulations that are either stabilised or destabilised with respect to the wild-type sequence. This result suggests additional reasons for selection against the C-variant stem-loop in vivo and provides an explanation for the increased affinity.

The three-dimensional structure of genomic RNA in bacteriophage MS2: implications for assembly

Using cryo-electron microscopy, single particle image processing and three-dimensional reconstruction with icosahedral averaging, we have determined the three-dimensional solution structure of bacteriophage MS2 capsids reassembled from recombinant protein in the presence of short oligonucleotides. We have also significantly extended the resolution of the previously reported structure of the wild-type MS2 virion. The structures of recombinant MS2 capsids reveal clear density for bound RNA beneath the coat protein binding sites on the inner surface of the T=3 MS2 capsid, and show that a short extension of the minimal assembly initiation sequence that promotes an increase in the efficiency of assembly, interacts with the protein capsid forming a network of bound RNA. The structure of the wild-type MS2 virion at approximately 9 A resolution reveals icosahedrally ordered density encompassing approximately 90% of the single-stranded RNA genome. The genome in the wild-type virion is arranged as two concentric shells of density, connected along the 5-fold symmetry axes of the particle. This novel RNA fold provides new constraints for models of viral assembly.

A simple, RNA-mediated allosteric switch controls the pathway to formation of a T=3 viral capsid

Using mass spectrometry we have detected both assembly intermediates and the final product, the T=3 viral capsid, during reassembly of the RNA bacteriophage MS2. Assembly is only efficient when both types of quasiequivalent coat protein dimer seen in the final capsid are present in solution. NMR experiments confirm that interconversion of these conformers is allosterically regulated by sequence-specific binding of a short RNA stem-loop. Isotope pulse-chase experiments confirm that all intermediates observed are competent for further coat protein addition, i.e., they are all on the pathway to capsid formation, and that the unit of capsid growth is a coat protein dimer. The major intermediate species are dominated by stoichiometries derived from formation of the particle threefold axis, implying that there is a defined pathway toward the T=3 shell. These results provide the first experimental evidence for a detailed mechanistic explanation of the regulation of quasiequivalent capsid assembly. They suggest a direct role for the encapsidated RNA in assembly in vivo, which is consistent with the structure of the genomic RNA within wild-type phage.

Dissecting the role of protein-protein and protein-nucleic acid interactions in MS2 bacteriophage stability

To investigate the role of protein-protein and protein-nucleic acid interactions in virus assembly, we compared the stabilities of native bacteriophage MS2, virus-like particles (VLPs) containing nonviral RNAs, and an assembly-defective coat protein mutant (dlFG) and its single-chain variant (sc-dlFG). Physical (high pressure) and chemical (urea and guanidine hydrochloride) agents were used to promote virus disassembly and protein denaturation, and the changes in virus and protein structure were monitored by measuring tryptophan intrinsic fluorescence, bis-ANS probe fluorescence, and light scattering. We found that VLPs dissociate into capsid proteins that remain folded and more stable than the proteins dissociated from authentic particles. The proposed model is that the capsid disassembles but the protein remains bound to the heterologous RNA encased by VLPs. The dlFG dimerizes correctly, but fails to assemble into capsids, because it lacks the 15-amino acid FG loop involved in inter-dimer interactions at the viral fivefold and quasi-sixfold axes. This protein was very unstable and, when compared with the dissociation/denaturation of the VLPs and the wild-type virus, it was much more susceptible to chemical and physical perturbation. Genetic fusion of the two subunits of the dimer in the single-chain dimer sc-dlFG stabilized the protein, as did the presence of 34-bp poly(GC) DNA. These studies reveal mechanisms by which interactions in the capsid lattice can be sufficiently stable and specific to ensure assembly, and they shed light on the processes that lead to the formation of infectious viral particles.

Dissecting the Fine Details of Assembly of aT = 3 Phage Capsid

The RNA bacteriophages represent ideal model systems in which to probe the detailed assembly pathway for the formation of aT = 3 quasi-equivalent capsid. For MS2, the assembly reaction can be probedin vitrousing acid disassembled coat protein subunits and a short (19 nt) RNA stem-loop that acts as the translational operator of the replicase gene and leads to sequence-specific sequestration and packaging of the cognate phage RNAin vivo. Reassembly reactions can be initiated by mixing these components at neutral pH. The molecular basis of the sequence-specific RNA–protein interaction is now well understood. Recent NMR studies on the protein demonstrate extensive mobility in the loops of the polypeptide that alter their conformations to form the quasi-equivalent conformers of the final capsid. It seems reasonable to assume that RNA binding results in reduction of this flexibility. However, mass spectrometry suggests that these RNA–protein complexes may only provide one type of quasi-equivalent capsid building block competent to form five-fold axes but not the full shell. Work with longer RNAs suggests that the RNA may actively template the assembly pathway providing a partial explanation of how conformers are selected in the growing shell.

Sequential dimerization of human zipcode-binding protein IMP1 on RNA: a cooperative mechanism providing RNP stability

Active cytoplasmic RNA localization depends on the attachment of RNA-binding proteins that dictate the destination of the RNA molecule. In this study, we used an electrophoretic mobility-shift assay in combination with equilibrium and kinetic analyses to characterize the assembly of the human zipcode-binding protein IMP1 on targets in the 3'-UTR from Igf-II mRNA and in H19 RNA. In both cases, two molecules of IMP1 bound to RNA by a sequential, cooperative mechanism, characterized by an initial fast step, followed by a slow second step. The first step created an obligatory assembly intermediate of low stability, whereas the second step was the discriminatory event that converted a putative RNA target into a 'locked' stable RNP. The ability to dimerize was also observed between members of the IMP family of zipcode-binding proteins, providing a multitude of further interaction possibilities within RNP granules and with the localization apparatus.

Structural studies of MS2 bacteriophage virus particle disassembly by nuclear magnetic resonance relaxation measurements

In this article we studied, by nuclear magnetic resonance relaxation measurements, the disassembly of a virus particle-the MS2 bacteriophage. MS2 is one of the single-stranded RNA bacteriophages that infect Escherichia coli. At pH 4.5, the phage turns to a metastable state, as is indicated by an increase in the observed nuclear magnetic resonance signal intensity upon decreasing the pH from 7.0 to 4.5. Steady-state fluorescence and circular dichroism spectra at pH 4.5 show that the difference in conformation and secondary structure is not pronounced if compared with the phage at pH 7.0. At pH 4.5, two-dimensional (15)N-(1)H heteronuclear multiple quantum coherence (HMQC) spectrum shows approximately 40 crosspeaks, corresponding to the most mobile residues of MS2 coat protein at pH 4.5. The (15)N linewidth is approximately 30 Hz, which is consistent with an intermediate with a rotational relaxation time of 100 ns. The average spin lattice relaxation time (T(1)) of the mobile residues was measured at different temperatures, clearly distinguishing between the dimer and the equilibrium intermediate. The results show, for the first time, the presence of intermediates in the process of dissociation of the MS2 bacteriophage.

Kinetic analysis of sequence-specific recognition of ssDNA by an autoantibody

11F8 is a pathogenic monoclonal anti-ssDNA autoantibody isolated from a lupus prone mouse. Previous studies established that 11F8 is sequence-specific and identified the thermodynamic and kinetic basis for the specific recognition of ssDNA, and binding site mutations of a single-chain construct reveal that (Y32)LCDR1, (R31)HCDR1, (W33)HCDR1, (R98)HCDR3, (L97)HCDR3, and (Y100)HCDR3 are responsible for approximately 80% of the binding free energy. Here we evaluate the role of these residues along with a group of basic residues (K62, K64, R24, K52) within the context of the binding mechanism. Binding of 11F8 takes place in two steps. In the first step, the overall positive charge of the antigen binding site attracts the negatively charged DNA to form an encounter complex that is stabilized by two salt bridges and a hydrogen bond. The second step is a slow process in which minor conformational changes occur. During this step, aromatic side chains become desolvated, presumably through stacking interactions involving two thymine bases within the DNA recognition epitope. Although the stability of the complex arises primarily from interactions formed in the second step, sequence specificity results from interactions with residues involved in both steps. These studies also show that the way in which 11F8 achieves high affinity sequence-specific binding is more closely related to RNA binding proteins than those that bind DNA and point to strategies for disrupting DNA binding that could prove to be therapeutically useful.

Interaction of C5 protein with RNA aptamers selected by SELEX

RNA aptamers binding to C5 protein, the protein component of Escherichia coli RNase P, were selected and characterized as an initial step in elucidating the mechanism of action of C5 protein as an RNA-binding protein. Sequence analyses of the RNA aptamers suggest that C5 protein binds various RNA molecules with dissociation constants comparable to that of M1 RNA, the RNA component of RNase P. The dominant sequence, W2, was chosen for further study. Interactions between W2 and C5 protein were independent of Mg2+, in contrast to the Mg2+ dependency of M1 RNA-C5 protein interactions. The affinity of W2 for C5 protein increased with increasing concentration of monovalent NH4+, suggesting interactions via hydrophobic attraction. W2 forms a fairly stable complex with C5 protein, although the stability of this complex is lower than that of the complex of M1 RNA with C5 protein. The core RNA motif essential for interaction with C5 protein was identified as a stem-loop structure, comprising a 5 bp stem and a 20 nt loop. Our results strongly imply that C5 protein is an interacting partner protein of some cellular RNA species apart from M1 RNA.

Pre-steady-state and stopped-flow fluorescence analysis of Escherichia coli ribonuclease III: insights into mechanism and conformational changes associated with binding and catalysis

To better understand substrate recognition and catalysis by RNase III, we examined steady-state and pre-steady-state reaction kinetics, and changes in intrinsic enzyme fluorescence. The multiple turnover cleavage of a model RNA substrate shows a pre-steady-state burst of product formation followed by a slower phase, indicating that the steady-state reaction rate is not limited by substrate cleavage. RNase III catalyzed hydrolysis is slower at low pH, permitting the use of pre-steady-state kinetics to measure the dissociation constant for formation of the enzyme-substrate complex (K(d)=5.4(+/-0.6) nM), and the rate constant for phosphodiester bond cleavage (k(c)=1.160(+/-0.001) min(-1), pH 5.4). Isotope incorporation analysis shows that a single solvent oxygen atom is incorporated into the 5' phosphate of the RNA product, which demonstrates that the cleavage step is irreversible. Analysis of the pH dependence of the single turnover rate constant, k(c), fits best to a model for two or more titratable groups with pK(a) of ca 5.6, suggesting a role for conserved acidic residues in catalysis. Additionally, we find that k(c) is dependent on the pK(a) value of the hydrated divalent metal ion included in the reaction, providing evidence for participation of a metal ion hydroxide in catalysis, potentially in developing the nucleophile for the hydrolysis reaction. In order to assess whether conformational changes also contribute to the enzyme mechanism, we monitored intrinsic tryptophan fluorescence. During a single round of binding and cleavage by the enzyme we detect a biphasic change in fluorescence. The rate of the initial increase in fluorescence was dependent on substrate concentration yielding a second-order rate constant of 1.0(+/-0.1)x10(8) M(-1) s(-1), while the rate constant of the second phase was concentration independent (6.4(+/-0.8) s(-1); pH 7.3). These data, together with the unique dependence of each phase on divalent metal ion identity and pH, support the hypothesis that the two fluorescence transitions, which we attribute to conformational changes, correlate with substrate binding and catalysis.