Pre-steady-state and stopped-flow fluorescence analysis of Escherichia coli ribonuclease III: insights into mechanism and conformational changes associated with binding and catalysis

Protocol for detection of in vitro R-loop formation using dot blots

Dot-blot analysis is a technique that allows for fast and convenient detection and identification of nucleic acids and proteins. Here, we provide a guide for nucleic acid isolation from eukaryotic cells and sample processing to detect RNA/DNA hybrids. We then provide detailed steps to quantify dot signal intensity. This protocol can be adapted for screening conditions that result in the accumulation of R-loops. For complete details on the use and execution of this protocol, please refer to Smith et al.1.

Structural basis of microRNA biogenesis by Dicer-1 and its partner protein Loqs-PB

In animals and plants, Dicer enzymes collaborate with double-stranded RNA-binding domain (dsRBD) proteins to convert precursor-microRNAs (pre-miRNAs) into miRNA duplexes. We report six cryo-EM structures of Drosophila Dicer-1 that show how Dicer-1 and its partner Loqs‑PB cooperate (1) before binding pre-miRNA, (2) after binding and in a catalytically competent state, (3) after nicking one arm of the pre-miRNA, and (4) following complete dicing and initial product release. Our reconstructions suggest that pre-miRNA binds a rare, open conformation of the Dicer‑1⋅Loqs‑PB heterodimer. The Dicer-1 dsRBD and three Loqs‑PB dsRBDs form a tight belt around the pre-miRNA, distorting the RNA helix to place the scissile phosphodiester bonds in the RNase III active sites. Pre-miRNA cleavage shifts the dsRBDs and partially closes Dicer-1, which may promote product release. Our data suggest a model for how the Dicer‑1⋅Loqs‑PB complex affects a complete cycle of pre-miRNA recognition, stepwise endonuclease cleavage, and product release.

A method for quantifying how the activity of an enzyme is affected by the net charge of its nearest crowded neighbor

The electrostatic effects of protein crowding have not been systematically explored. Rather, protein crowding is generally studied with co‐solvents or crowders that are electrostatically neutral, with no methods to measure how the net charge (Z) of a crowder affects protein function. For example, can the activity of an enzyme be affected electrostatically by the net charge of its neighbor in crowded milieu? This paper reports a method for crowding proteins of different net charge to an enzyme via semi‐random chemical crosslinking. As a proof of concept, RNase A was crowded (at distances ≤ the Debye length) via crosslinking to different heme proteins with Z = +8.50 ± 0.04, Z = +6.39 ± 0.12, or Z = −10.30 ± 1.32. Crosslinking did not disrupt the structure of proteins, according to amide H/D exchange, and did not inhibit RNase A activity. For RNase A, we found that the electrostatic environment of each crowded neighbor had significant effects on rates of RNA hydrolysis. Crowding with cationic cytochrome c led to increases in activity, while crowding with anionic “supercharged” cytochrome c or myoglobin diminished activity. Surprisingly, electrostatic crowding effects were amplified at high ionic strength (I = 0.201 M) and attenuated at low ionic strength (I = 0.011 M). This salt dependence might be caused by a unique set of electric double layers at the dimer interspace (maximum distance of 8 Å, which cannot accommodate four layers). This new method of crowding via crosslinking can be used to search for electrostatic effects in protein crowding.

RNase III, Ribosome Biogenesis and Beyond

The ribosome is the universal catalyst for protein synthesis. Despite extensive studies, the diversity of structures and functions of this ribonucleoprotein is yet to be fully understood. Deciphering the biogenesis of the ribosome in a step-by-step manner revealed that this complexity is achieved through a plethora of effectors involved in the maturation and assembly of ribosomal RNAs and proteins. Conserved from bacteria to eukaryotes, double-stranded specific RNase III enzymes play a large role in the regulation of gene expression and the processing of ribosomal RNAs. In this review, we describe the canonical role of RNase III in the biogenesis of the ribosome comparing conserved and unique features from bacteria to eukaryotes. Furthermore, we report additional roles in ribosome biogenesis re-enforcing the importance of RNase III.

High-yield production of human Dicer by transfection of human HEK293-EBNA1 cells grown in suspension

Background

Dicer is a 219-kDa protein that plays key roles in gene regulation, particularly as the ribonuclease III enzyme responsible for cleaving precursor miRNA substrates. Its enzymatic activity is highly regulated by protein factors, and this regulation can impact on the levels of miRNAs and modulate the behavior of a cell. To better understand the underlying mechanisms of regulation, detailed enzymatic and structural characterization of Dicer are needed. However, these types of studies generally require several milligrams of recombinant protein, and efficient preparation of such quantities of pure human Dicer remains a challenge. To prepare large quantities of human Dicer, we have optimized transfection in HEK293-6E cells grown in suspension and streamlined a purification procedure.

Results

Transfection conditions were first optimized to achieve expression levels between 10 and 18 mg of recombinant Dicer per liter of culture. A three-step purification protocol was then developed that yields 4–9 mg of purified Dicer per liter of culture in a single day. From SEC-MALS/RI analysis and negative stain TEM, we confirmed that the purified protein is monomerically pure ( ≥ 98%) and folds with the characteristic L-shape geometry. Using an electrophoretic mobility shift assay, a dissociation constant (K_d) of 5 nM was measured for Dicer binding to pre-let-7a-1, in agreement with previous reports. However, when probing the cleavage activity of Dicer for pre-let-7a-1, we measured k_cat (7.2 ± 0.5 min^− 1) and K_M (1.2 ± 0.3 μM) values that are much higher than previously reported due to experimental conditions that better respect the steady-state assumption.

Conclusions

The expression and purification protocols described here provide high yields of monomerically pure and active human Dicer. Cleavage studies of a pre-let-7 substrate with this purified Dicer reveal higher k_cat and K_M values than previously reported and support the current view that conformational changes are associated with substrate binding. Large quantities of highly pure Dicer will be valuable for future biochemical, biophysical and structural investigations of this key protein of the miRNA pathway.

Electronic supplementary material

The online version of this article (10.1186/s12896-018-0485-3) contains supplementary material, which is available to authorized users.

The Impact of DNA Topology and Guide Length on Target Selection by a Cytosine-Specific Cas9

Cas9 is an RNA-guided DNA cleavage enzyme being actively developed for genome editing and gene regulation. To be cleaved by Cas9, a double stranded DNA, or the protospacer, must be complementary to the guide region, typically 20-nucleotides in length, of the Cas9-bound guide RNA, and adjacent to a short Cas9-specific element called Protospacer Adjacent Motif (PAM). Understanding the correct juxtaposition of the protospacer- and PAM-interaction with Cas9 will enable development of versatile and safe Cas9-based technology. We report identification and biochemical characterization of Cas9 from Acidothermus cellulolyticus (AceCas9). AceCas9 depends on a 5'-NNNCC-3' PAM and is more efficient in cleaving negative supercoils than relaxed DNA. Kinetic as well as in vivo activity assays reveal that AceCas9 achieves optimal activity when combined with a guide RNA containing a 24-nucleotide complementarity region. The cytosine-specific, DNA topology-sensitive, and extended guide-dependent properties of AceCas9 may be explored for specific genome editing applications.

The catalytic efficiency of yeast ribonuclease III depends on substrate specific product release rate

Members of the ribonuclease III (RNase III) family regulate gene expression by triggering the degradation of double stranded RNA (dsRNA). Hundreds of RNase III cleavage targets have been identified and their impact on RNA maturation and stability is now established. However, the mechanism defining substrates’ reactivity remains unclear. In this study, we developed a real-time FRET assay for the detection of dsRNA degradation by yeast RNase III (Rnt1p) and characterized the kinetic bottlenecks controlling the reactivity of different substrates. Surprisingly, the results indicate that Rnt1p cleavage reaction is not only limited by the rate of catalysis but can also depend on base-pairing of product termini. Cleavage products terminating with paired nucleotides, like the degradation signals found in coding mRNA sequence, were less reactive and more prone to inhibition than products having unpaired nucleotides found in non-coding RNA substrates. Mutational analysis of U5 snRNA and Mig2 mRNA confirms the pairing of the cleavage site as a major determinant for the difference between cleavage rates of coding and non-coding RNA. Together the data indicate that the base-pairing of Rnt1p substrates encodes reactivity determinants that permit both constitutive processing of non-coding RNA while limiting the rate of mRNA degradation.

Mechanism of Ribonuclease III Catalytic Regulation by Serine Phosphorylation

Ribonuclease III (RNase III) is a conserved, gene-regulatory bacterial endonuclease that cleaves double-helical structures in diverse coding and noncoding RNAs. RNase III is subject to multiple levels of control, reflective of its global regulatory functions. Escherichia coli (Ec) RNase III catalytic activity is known to increase during bacteriophage T7 infection, reflecting the expression of the phage-encoded protein kinase, T7PK. However, the mechanism of catalytic enhancement is unknown. This study shows that Ec-RNase III is phosphorylated on serine in vitro by purified T7PK, and identifies the targets as Ser33 and Ser34 in the N-terminal catalytic domain. Kinetic experiments reveal a 5-fold increase in k_cat and a 1.4-fold decrease in K_m following phosphorylation, providing a 7.4–fold increase in catalytic efficiency. Phosphorylation does not change the rate of substrate cleavage under single-turnover conditions, indicating that phosphorylation enhances product release, which also is the rate-limiting step in the steady-state. Molecular dynamics simulations provide a mechanism for facilitated product release, in which the Ser33 phosphomonoester forms a salt bridge with the Arg95 guanidinium group, thereby weakening RNase III engagement of product. The simulations also show why glutamic acid substitution at either serine does not confer enhancement, thus underscoring the specific requirement for a phosphomonoester.

Biochemical properties of Bacillus Calmette Guerin ribonuclease III

Double-stranded RNA (dsRNA) is discovered to participate in the regulation of gene expression in both bacterial and eukaryotic cells. Members of ribonuclease III (RNase III) family recognize RNA motifs and cleave substrates at specific sites in a divalent-metal-ion-dependent manner. In this study, we find the RNase III from Bacillus Calmette Guerin (BCG-RNase III) cleaves small hairpin RNA based on the conserved stem structure associated with Mycobacterium 16S ribosomal RNA precursor at specific sites which are not determined. To evaluate the influence of remnant endogenous ribonucleases from expression host on RNA cleavage assays for RNase III, we use E44A and D48A mutant of the enzyme to perform RNA cleavage assays and find that remnant ribonucleases have no effect on cleavage assays. The RNA cleavage activity of the enzyme can be supported by Mg(2+), Mn(2+), and Co(2+) and enhanced with the increasing salt concentration. The catalytic activity of the enzyme is exhibited when the temperature of the reaction buffer ranges from 30 to 55 °C and the pH of the buffer from 7.0 to 10.0. Two major cleavage sites in RNA substrate are identified using RNA Ligase Mediated Rapid Amplification of cDNA Ends (RLM-RACE).

Regulation of Escherichia coli RNase III activity

Bacterial cells respond to changes in the environment by adjusting their physiological reactions. In cascades of cellular responses to stresses of various origins, rapid modulation of RNA function is known to be an effective biochemical adaptation. Among many factors affecting RNA function, RNase III, a member of the phylogenetically highly conserved endoribonuclease III family, plays a key role in posttranscriptional regulatory pathways in Escherichia coli. In this review, we provide an overview of the factors affecting RNase III activity in E. coli.

Mechanistic Studies Reveal Similar Catalytic Strategies for Phosphodiester Bond Hydrolysis by Protein-only and RNA-dependent Ribonuclease P

Ribonuclease P (RNase P) is an endonuclease that catalyzes the essential removal of the 5' end of tRNA precursors. Until recently, all identified RNase P enzymes were a ribonucleoprotein with a conserved catalytic RNA component. However, the discovery of protein-only RNase P (PRORP) shifted this paradigm, affording a unique opportunity to compare mechanistic strategies used by naturally evolved protein and RNA-based enzymes that catalyze the same reaction. Here we investigate the enzymatic mechanism of pre-tRNA hydrolysis catalyzed by the NYN (Nedd4-BP1, YacP nuclease) metallonuclease of Arabidopsis thaliana, PRORP1. Multiple and single turnover kinetic data support a mechanism where a step at or before chemistry is rate-limiting and provide a kinetic framework to interpret the results of metal alteration, mutations, and pH dependence. Catalytic activity has a cooperative dependence on the magnesium concentration (nH = 2) under kcat/Km conditions, suggesting that PRORP1 catalysis is optimal with at least two active site metal ions, consistent with the crystal structure. Metal rescue of Asp-to-Ala mutations identified two aspartates important for enhancing metal ion affinity. The single turnover pH dependence of pre-tRNA cleavage revealed a single ionization (pKa ∼ 8.7) important for catalysis, consistent with deprotonation of a metal-bound water nucleophile. The pH and metal dependence mirrors that observed for the RNA-based RNase P, suggesting similar catalytic mechanisms. Thus, despite different macromolecular composition, the RNA and protein-based RNase P act as dynamic scaffolds for the binding and positioning of magnesium ions to catalyze phosphodiester bond hydrolysis.

Ribonuclease III mechanisms of double-stranded RNA cleavage

Double-stranded(ds) RNA has diverse roles in gene expression and regulation, host defense, and genome surveillance in bacterial and eukaryotic cells. A central aspect of dsRNA function is its selective recognition and cleavage by members of the ribonuclease III (RNase III) family of divalent-metal-ion-dependent phosphodiesterases. The processing of dsRNA by RNase III family members is an essential step in the maturation and decay of coding and noncoding RNAs, including miRNAs and siRNAs. RNase III, as first purified from Escherichia coli, has served as a biochemically well-characterized prototype, and other bacterial orthologs provided the first structural information. RNase III family members share a unique fold (RNase III domain) that can dimerize to form a structure that binds dsRNA and cleaves phosphodiesters on each strand, providing the characteristic 2 nt, 3′-overhang product ends. Ongoing studies are uncovering the functions of additional domains, including, inter alia, the dsRNA-binding and PAZ domains that cooperate with the RNase III domain to select target sites, regulate activity, confer processivity, and support the recognition of structurally diverse substrates. RNase III enzymes function in multicomponent assemblies that are regulated by diverse inputs, and at least one RNase III-related polypeptide can function as a noncatalytic, dsRNA-binding protein. This review summarizes the current knowledge of the mechanisms of catalysis and target site selection of RNase III family members, and also addresses less well understood aspects of these enzymes and their interactions with dsRNA. WIREs RNA 2014, 5:31–48. doi: 10.1002/wrna.1195

Characterization of Aquifex aeolicus ribonuclease III and the reactivity epitopes of its pre-ribosomal RNA substrates

Ribonuclease III cleaves double-stranded (ds) structures in bacterial RNAs and participates in diverse RNA maturation and decay pathways. Essential insight on the RNase III mechanism of dsRNA cleavage has been provided by crystallographic studies of the enzyme from the hyperthermophilic bacterium, Aquifex aeolicus. However, the biochemical properties of A. aeolicus (Aa)-RNase III and the reactivity epitopes of its substrates are not known. The catalytic activity of purified recombinant Aa-RNase III exhibits a temperature optimum of ∼70–85°C, with either Mg²⁺ or Mn²⁺ supporting efficient catalysis. Small hairpins based on the stem structures associated with the Aquifex 16S and 23S rRNA precursors are cleaved at sites that are consistent with production of the immediate precursors to the mature rRNAs. Substrate reactivity is independent of the distal box sequence, but is strongly dependent on the proximal box sequence. Structural studies have shown that a conserved glutamine (Q157) in the Aa-RNase III dsRNA-binding domain (dsRBD) directly interacts with a proximal box base pair. Aa-RNase III cleavage of the pre-16S substrate is blocked by the Q157A mutation, which reflects a loss of substrate binding affinity. Thus, a highly conserved dsRBD-substrate interaction plays an important role in substrate recognition by bacterial RNase III.

Brønsted analysis and rate-limiting steps for the T5 flap endonuclease catalyzed hydrolysis of exonucleolytic substrates

During replication and repair flap endonucleases (FENs) catalyze endonucleolytic and exonucleolytic (EXO) DNA hydrolyses. Altering the leaving group pK(a), by replacing the departing nucleoside with analogues, had minimal effect on k(cat)/K(M) in a T5FEN-catalyzed EXO reaction, producing a very low Brønsted coefficient, β(lg). Investigation of the viscosity dependence of k(cat)/K(M) revealed that reactions of EXO substrates are rate limited by diffusional encounter of enzyme and substrate, explaining the small β(lg). However, the maximal single turnover rate of the FEN EXO reaction also yields a near zero β(lg). A low β(lg) was also observed when evaluating k(cat)/K(M) for D201I/D204S FEN-catalyzed reactions, even though these reactions were not affected by added viscogen. But an active site K83A mutant produced a β(lg) = -1.2 ± 0.10, closer to the value observed for solution hydrolysis of phosphate diesters. The pH-maximal rate profiles of the WT and K83A FEN reactions both reach a maximum at high pH and do not support an explanation of the data that involves catalysis of leaving group departure by Lys 83 functioning as a general acid. Instead, a rate-limiting physical step, such as substrate unpairing or helical arch ordering, that occurs after substrate association must kinetically hide an inherent large β(lg). It is suggested that K83 acts as an electrostatic catalyst that stabilizes the transition state for phosphate diester hydrolysis. When K83 is removed from the active site, chemistry becomes rate limiting and the leaving group sensitivity of the FEN-catalyzed reaction is revealed.

Thermotoga maritima ribonuclease III. Characterization of thermostable biochemical behavior and analysis of conserved base pairs that function as reactivity epitopes for the Thermotoga 23S rRNA precursor

The cleavage of double-stranded (ds) RNA by ribonuclease III is a conserved early step in bacterial rRNA maturation. Studies on the mechanism of dsRNA cleavage by RNase III have focused mainly on the enzymes from mesophiles such as Escherichia coli. In contrast, neither the catalytic properties of extremophile RNases III nor the structures and reactivities of their cognate substrates have been described. The biochemical behavior of RNase III of the hyperthermophilic bacterium Thermotoga maritima was analyzed using purified recombinant enzyme. T. maritima (Tm) RNase III catalytic activity exhibits a broad optimal temperature range of approximately 40-70 degrees C, with significant activity at 95 degrees C. Tm-RNase III cleavage of substrate is optimally supported by Mg(2+) at >or=1 mM concentrations. Mn(2+), Co(2+), and Ni(2+) also support activity but with reduced efficiencies. The enzyme functions optimally at pH 8 and approximately 50-80 mM salt concentrations. Small RNA hairpins that incorporate the 16S and 23S pre-rRNA stem sequences are efficiently cleaved by Tm-RNase III at sites that are consistent with production in vivo of the immediate precursors to the mature rRNAs. Analysis of pre-23S substrate variants reveals a dependence of reactivity on the base-pair (bp) sequence in the proximal box (pb), a site of protein contact that functions as a positive recognition determinant for Escherichia coli (Ec) RNase III substrates. The dependence of reactivity on the pb sequence is similar to that observed with Ec-RNase III substrates. In fact, Tm-RNase III cleaves an Ec-RNase III substrate with identical specificity and is inhibited by antideterminant bp that also inhibit Ec-RNase III. These results indicate the conservation, across a broad phylogenetic distance, of positive and negative determinants of reactivity of bacterial RNase III substrates.

Structural and functional modules in RNA interference

RNA interference (RNAi) uses small RNA molecules to regulate transcriptional and post-transcriptional gene expression. In recent years, a number of structural studies provided insights into the molecular architecture and mechanism of functional modules of RNAi. Mechanisms of nucleic acid recognition and cleavage have been revealed by structural studies of proteins and their nucleic acid complexes involved in RNA biogenesis, for example, Argonaute, PIWI, RNase III, Dicer, Drosha, and DGCR8. While quite a few questions remain, an excellent structural and mechanistic overview of RNAi processes has already emerged. In this review, we examine functional modules and their assemblies in RNAi processes.

Probing the catalytic triad of an archaeal RNA splicing endonuclease

Among the four known mechanisms of intron removal, three are reputedly catalyzed by RNA molecules. In the fourth mechanism, a protein endonuclease removes introns from nuclear tRNA and all archaeal RNAs. Three strictly conserved residues of the splicing endonuclease, a histidine, a lysine, and a tyrosine, were predicted to catalyze the intron cleavage reaction in a manner similar to that of the catalytic triad of ribonuclease A. Single-turnover kinetic parameters were obtained for the wild-type enzyme and two triad mutants. Mutation of histidine to alanine produced an at least approximately 28-fold reduction; mutation of tyrosine to phenylalanine produced an at least approximately 7-fold reduction in activity, while a histidine and tyrosine double mutation abolished cleavage. The single mutation of lysine to glutamic acid abolished RNA cleavage activity in the absence of a divalent metal but maintained a substantial level of activity in the presence of specific divalent metals. These data support important functional roles already proposed for the catalytic triad and suggest an intriguing hypothesis in which the splicing endonuclease is an intermediate in the transition from the RNA to the RNP world.

Heterodimer-based analysis of subunit and domain contributions to double-stranded RNA processing by Escherichia coli RNase III in vitro

Members of the RNase III family are the primary cellular agents of dsRNA (double-stranded RNA) processing. Bacterial RNases III function as homodimers and contain two dsRBDs (dsRNA-binding domains) and two catalytic sites. The potential for functional cross-talk between the catalytic sites and the requirement for both dsRBDs for processing activity are not known. It is shown that an Escherichia coli RNase III heterodimer that contains a single functional wt (wild-type) catalytic site and an inactive catalytic site (RNase III[E117A/wt]) cleaves a substrate with a single scissile bond with a k(cat) value that is one-half that of wt RNase III, but exhibits an unaltered K(m). Moreover, RNase III[E117A/wt] cleavage of a substrate containing two scissile bonds generates singly cleaved intermediates that are only slowly cleaved at the remaining phosphodiester linkage, and in a manner that is sensitive to excess unlabelled substrate. These results demonstrate the equal probability, during a single binding event, of placement of a scissile bond in a functional or nonfunctional catalytic site of the heterodimer and reveal a requirement for substrate dissociation and rebinding for cleavage of both phosphodiester linkages by the mutant heterodimer. The rate of phosphodiester hydrolysis by RNase III[E117A/wt] has the same dependence on Mg(2+) ion concentration as that of the wt enzyme, and exhibits a Hill coefficient (h) of 2.0+/-0.1, indicating that the metal ion dependence essentially reflects a single catalytic site that employs a two-Mg(2+)-ion mechanism. Whereas an E. coli RNase III mutant that lacks both dsRBDs is inactive, a heterodimer that contains a single dsRBD exhibits significant catalytic activity. These findings support a reaction pathway involving the largely independent action of the dsRBDs and the catalytic sites in substrate recognition and cleavage respectively.

The mechanism of RNase III action: how dicer dices

Members of the Ribonuclease III (RNase III) family are double-stranded (ds) RNA-specific endoribonucleases, characterized by a signature motif in their active centers and a 2-nucleotide (nt) 3' overhang in their products. Dicer functions as a dsRNA-processing enzyme, producing small interfering RNA (siRNA) of approx. 24 nt in length (approx. 20-basepair RNA duplex with a 2-nt 3' overhang on each end). Bacterial RNase III functions not only as a processing enzyme, but also as a binding protein that binds dsRNA without cleaving it. As a processing enzyme it produces siRNA-like RNA of approx. 13 nt in length (approx. 9-basepair duplex with a 2-nt 3' overhang on each end) as well as various types of mature RNA. Dicer is structurally most complicated member of the family; bacterial RNase III is comparatively much simpler. One structure is known for Dicer in its RNA-free form (MacRae, Zhou, Li, Repic, Brooks, Cande, Adams, and Doudna, Science 311:195-198); many structures are available for bacterial RNase III, including the first catalytic complex of the entire family (Gan, Tropea, Austin, Court, Waugh, and Ji, Cell 124:355-366). In light of the structural and biochemical information on the RNase III proteins and the structure of a non-Dicer PAZ (Piwi Argonaute Zwille) domain in complex with a 7-basepair RNA duplex with a 2-nt 3' overhang on each end (Ma, Ye, and Patel, Nature 429:318-322), the structure and function of Dicer is being elucidated.

The pH-dependence of the Escherichia coli RNase HII-catalysed reaction suggests that an active site carboxylate group participates directly in catalysis

RNase HII specifically catalyses the hydrolysis of phosphate diester linkages contained within the RNA portion of DNA/RNA hybrids. The catalytic parameters of the enzyme derived from Escherichia coli BL21 have been measured using 5'-fluorescent oligodeoxynucleotide substrates containing embedded ribonucleotides. The products of the reaction and the chemistry of phosphate diester hydrolysis were assigned unequivocally using mass spectrometry. The pH-dependence of the catalytic parameters was measured under conditions of optimal magnesium ion concentration. The logarithm of the turnover number of the enzyme increases steeply with pH until a pH-independent region is reached close to neutrality. The slope of the pH-dependent region is 2, indicating that the catalytically proficient form of RNase HII is di-anionic. The pH-dependence of log 1/K(M) is a sigmoidal curve reaching a maximal value at higher pH, suggesting deprotonation of a residue stabilises substrate binding. Possible mechanisms for the RNase HII-catalysed reaction consistent with the pH-dependent behaviour of the enzyme are discussed. The active sites of RNase H enzymes contain a cluster of four strictly conserved carboxylate groups. Together, the data suggest a requirement for ionisation of an active site carboxylic acid for metal ion binding or correct positioning of metal ion(s) in the enzyme-substrate complex and a role for a second active site carboxylate in general base catalysis.

Intermediate states of ribonuclease III in complex with double-stranded RNA

Bacterial ribonuclease III (RNase III) can affect RNA structure and gene expression in either of two ways: as a processing enzyme that cleaves double-stranded (ds) RNA, or as a binding protein that binds but does not cleave dsRNA. We previously proposed a model of the catalytic complex of RNase III with dsRNA based on three crystal structures, including the endonuclease domain of RNase III with and without bound metal ions and a dsRNA binding protein complexed with dsRNA. We also reported a noncatalytic assembly observed in the crystal structure of an RNase III mutant, which binds but does not cleave dsRNA, complexed with dsRNA. We hypothesize that the RNase III*dsRNA complex can exist in two functional forms, a catalytic complex and a noncatalytic assembly, and that in between the two forms there may be intermediate states. Here, we present four crystal structures of RNase III complexed with dsRNA, representing possible intermediates.

Structural Insight into the Mechanism of Double-Stranded RNA Processing by Ribonuclease III

Members of the ribonuclease III (RNase III) family are double-stranded RNA (dsRNA) specific endoribonucleases characterized by a signature motif in their active centers and a two-base 3' overhang in their products. While Dicer, which produces small interfering RNAs, is currently the focus of intense interest, the structurally simpler bacterial RNase III serves as a paradigm for the entire family. Here, we present the crystal structure of an RNase III-product complex, the first catalytic complex observed for the family. A 7 residue linker within the protein facilitates induced fit in protein-RNA recognition. A pattern of protein-RNA interactions, defined by four RNA binding motifs in RNase III and three protein-interacting boxes in dsRNA, is responsible for substrate specificity, while conserved amino acid residues and divalent cations are responsible for scissile-bond cleavage. The structure reveals a wealth of information about the mechanism of RNA hydrolysis that can be extrapolated to other RNase III family members.

Structure of the nuclease domain of ribonuclease III from M. tuberculosis at 2.1 A

RNase III enzymes are a highly conserved family of proteins that specifically cleave double-stranded (ds)RNA. These proteins are involved in a diverse group of functions, including ribosomal RNA processing, mRNA maturation and decay, snRNA and snoRNA processing, and RNA interference. Here we report the crystal structure of the nuclease domain of RNase III from the pathogen Mycobacterium tuberculosis. Although globally similar to other RNase III folds, this structure has some features not observed in previously reported models. These include the presence of an additional metal ion near the catalytic site, as well as conserved secondary structural elements that are proposed to have functional roles in the recognition of dsRNAs.

The absB Gene Encodes a Double Strand-specific Endoribonuclease That Cleaves the Read-through Transcript of the rpsO-pnp Operon in Streptomyces coelicolor

The absB locus of Streptomyces coelicolor encodes a homolog of bacterial RNase III. We cloned and overexpressed the absB gene product and purified a decahistidine-tagged version of the protein. We show here that AbsB is active against double-stranded RNA transcripts derived from synthetic DNAs but is inactive with single-stranded homopolymers. We thus designate the absB product RNase IIIS. Using T7 RNA polymerase and a cloned template containing the rpsO-pnp intergenic region, we synthesized an RNA substrate representing a portion of the read-through transcript normally produced in S. coelicolor. This transcript contains the sequences that form the putative rpsO terminator and those that form an intergenic stem-loop structure thought to be the site for RNase IIIS processing of the read-through transcript. We show that RNase IIIS does cleave that model transcript, with primary and secondary cleavage sites in an internal loop in the stem-loop structure. We have identified the primary and secondary cleavage sites by primer extension and demonstrate the further processing of the initial cleavage products. Thus, as is the case in Escherichia coli, the read-through transcript from rpsO-pnp is cleaved by RNase IIIS in S. coelicolor. However, the cleavage sites are different in the two systems. The positions of the cleavage sites in the stem-loop of the S. coelicolor transcript are more akin to those identified in the processing of bacteriophage T7 mRNAs. A kinetic assay for RNase IIIS was developed, and kinetic parameters for the reaction utilizing the model transcript from rpsO-pnp were determined.

Catalytic mechanism of Escherichia coli ribonuclease III: kinetic and inhibitor evidence for the involvement of two magnesium ions in RNA phosphodiester hydrolysis

Escherichia coli ribonuclease III (RNase III; EC 3.1.24) is a double-stranded(ds)-RNA-specific endonuclease with key roles in diverse RNA maturation and decay pathways. E.coli RNase III is a member of a structurally distinct superfamily that includes Dicer, a central enzyme in the mechanism of RNA interference. E.coli RNase III requires a divalent metal ion for activity, with Mg²⁺ as the preferred species. However, neither the function(s) nor the number of metal ions involved in catalysis is known. To gain information on metal ion involvement in catalysis, the rate of cleavage of the model substrate R1.1 RNA was determined as a function of Mg²⁺ concentration. Single-turnover conditions were applied, wherein phosphodiester cleavage was the rate-limiting event. The measured Hill coefficient (n_H) is 2.0 ± 0.1, indicative of the involvement of two Mg²⁺ ions in phosphodiester hydrolysis. It is also shown that 2-hydroxy-4H-isoquinoline-1,3-dione—an inhibitor of ribonucleases that employ two divalent metal ions in their catalytic sites—inhibits E.coli RNase III cleavage of R1.1 RNA. The IC₅₀ for the compound is 14 μM for the Mg²⁺-supported reaction, and 8 μM for the Mn²⁺-supported reaction. The compound exhibits noncompetitive inhibitory kinetics, indicating that it does not perturb substrate binding. Neither the O-methylated version of the compound nor the unsubstituted imide inhibit substrate cleavage, which is consistent with a specific interaction of the N-hydroxyimide with two closely positioned divalent metal ions. A preliminary model is presented for functional roles of two divalent metal ions in the RNase III catalytic mechanism.

Molecular requirements for duplex recognition and cleavage by eukaryotic RNase III: discovery of an RNA-dependent DNA cleavage activity of yeast Rnt1p

Members of the double-stranded RNA (dsRNA) specific RNase III family are known to use a conserved dsRNA-binding domain (dsRBD) to distinguish RNA A-form helices from DNA B-form ones, however, the basis of this selectivity and its effect on cleavage specificity remain unknown. Here, we directly examine the molecular requirements for dsRNA recognition and cleavage by the budding yeast RNase III (Rnt1p), and compare it to both bacterial RNase III and fission yeast RNase III (Pac1). We synthesized substrates with either chemically modified nucleotides near the cleavage sites, or with different DNA/RNA combinations, and investigated their binding and cleavage by Rnt1p. Substitution for the ribonucleotide vicinal to the scissile phosphodiester linkage with 2'-deoxy-2'-fluoro-beta-d-ribose (2' F-RNA), a deoxyribonucleotide, or a 2'-O-methylribonucleotide permitted cleavage by Rnt1p, while the introduction of a 2', 5'-phosphodiester linkage permitted binding, but not cleavage. This indicates that the position of the phosphodiester link with respect to the nuclease domain, and not the 2'-OH group, is critical for cleavage by Rnt1p. Surprisingly, Rnt1p bound to a DNA helix capped with an NGNN tetraribonucleotide loop indicating that the binding of at least one member of the RNase III family is not restricted to RNA. The results also suggest that the dsRBD may accommodate B-form DNA duplexes. Interestingly, Rnt1p, but not Pac1 nor bacterial RNase III, cleaved the DNA strand of a DNA/RNA hybrid, indicating that A-form RNA helix is not essential for cleavage by Rnt1p. In contrast, RNA/DNA hybrids bound to, but were not cleaved by Rnt1p, underscoring the critical role for the nucleotide located at 3' end of the tetraloop and suggesting an asymmetrical mode of substrate recognition. In cell extracts, the native enzyme effectively cleaved the DNA/RNA hybrid, indicating much broader Rnt1p substrate specificity than previously thought. The discovery of this novel RNA-dependent deoxyribonuclease activity has potential implications in devising new antiviral strategies that target actively transcribed DNA.

Exceptionally fast self-cleavage by a Neurospora Varkud satellite ribozyme

Most of the small ribozymes, including those that have been investigated as potential therapeutic agents, appear to be rather poor catalysts. These RNAs use an internal phosphoester transfer mechanism to catalyze site-specific RNA cleavage with apparent cleavage rate constants typically <2 min(-1). We have identified variants of one of these, the Neurospora Varkud satellite ribozyme, that self-cleaves with experimentally measured apparent rate constants of up to 10 s(-1) (600 min(-1)), approximately 2 orders of magnitude faster than any previously characterized self-cleaving RNA. We describe structural features of the cleavage site loop and an adjacent helix that affect the apparent rate constants for cleavage and ligation and the equilibrium between them. These data show that the phosphoester transfer ribozymes can catalyze reactions with rate constants much larger than previously appreciated and in the range of those of protein enzymes that perform similar reactions.

Divalent metal-dependent catalysis and cleavage specificity of CSP41, a chloroplast endoribonuclease belonging to the short chain dehydrogenase/reductase superfamily

CSP41 is a ubiquitous chloroplast endoribonuclease belonging to the short chain dehydrogenase/reductase (SDR) superfamily. To help elucidate the role of CSP41 in chloroplast gene regulation, the mechanisms that determine its substrate recognition and catalytic activity were investigated. A divalent metal is required for catalysis, most probably to provide a nucleophile for cleavage 5' to the phosphodiester bond, and may also participate in cleavage site selection. This requirement distinguishes CSP41 from other Rossman fold-containing proteins from the SDR superfamily, including several RNA-binding proteins and endonucleases. CSP41 is active only in the presence of MgCl2 and CaCl2. Although Mg2+- and Ca2+-activated CSP41 cleave at identical sites in the single-stranded regions of a stem-loop-containing substrate, Mg2+-activated CSP41 was also able to cleave within the double-stranded region of the stem-loop. Mixed metal experiments with Mg2+ and Ca2+ suggest that CSP41 contains a single divalent metal-binding site which is non-selective, since Mn2+, Co2+ and Zn2+ compete with Mg2+ for binding, although there is no activity in their presence. Using site-directed mutagenesis, we identified three residues, Asn71, Asp89 and Asp103, which may form the divalent metal-binding pocket. The activation constant for Mg2+ (K(A,Mg) = 2.1 +/- 0.4 mM) is of the same order of magnitude as the stromal Mg2+ concentrations, which fluctuate between 0.5 and 10 mM as a function of light and of leaf development. These changes in stromal Mg2+ concentration may regulate CSP41 activity, and thus cpRNA stability, during plant development.

Mutational analysis of an RNA internal loop as a reactivity epitope for Escherichia coli ribonuclease III substrates

The enzymatic cleavage of double-stranded (ds) RNA is an obligatory step in the maturation and decay of many cellular and viral RNAs. The primary agents of dsRNA processing are members of the ribonuclease III (RNase III) superfamily, which are highly conserved in eukaryotic and bacterial cells. Escherichia coli RNase III participates in the maturation of the ribosomal RNAs and in the maturation and decay of cellular and phage mRNAs. E. coli RNase III-dependent cleavage events can regulate gene expression by controlling mRNA stability and translational activity. RNase III recognizes its substrates and selects the scissile phosphodiester(s) by recognizing specific RNA sequence and structural elements, termed reactivity epitopes. Some E. coli RNase III substrates contain an internal loop, in which is located the single scissile phosphodiester. The specific features of the internal loop that establish the pattern of single-strand cleavage are not known. A mutational analysis of the asymmetric [4 nt/5 nt] internal loop of the phage T7 R1.1 substrate reveals that cleavage reactivity is largely independent of internal loop sequence. Instead, the [4/5] asymmetry per se is the primary determinant of cleavage of a single bond within the 5 nt strand of the internal loop. The T7 R1.1 internal loop lacks elements of local tertiary structure, as revealed by sensitivity to cleavage by terbium ion and by the ability of the internal loop to destabilize a small model duplex. The internal loop functions as a discrete structural element in that the pattern of cleavage can be controlled by the specific type of asymmetry. The implications of these findings are discussed in light of RNase III substrate function as a gene regulatory element.

RNA structure-dependent uncoupling of substrate recognition and cleavage by Escherichia coli ribonuclease III

Members of the ribonuclease III superfamily of double-strand-specific endoribonucleases participate in diverse RNA maturation and decay pathways. Ribonuclease III of the gram-negative bacterium Escherichia coli processes rRNA and mRNA precursors, and its catalytic action can regulate gene expression by controlling mRNA translation and stability. It has been proposed that E.coli RNase III can function in a non-catalytic manner, by binding RNA without cleaving phosphodiesters. However, there has been no direct evidence for this mode of action. We describe here an RNA, derived from the T7 phage R1.1 RNase III substrate, that is resistant to cleavage in vitro by E.coli RNase III but retains comparable binding affinity. R1.1[CL3B] RNA is recognized by RNase III in the same manner as R1.1 RNA, as revealed by the similar inhibitory effects of a specific mutation in both substrates. Structure-probing assays and Mfold analysis indicate that R1.1[CL3B] RNA possesses a bulge- helix-bulge motif in place of the R1.1 asymmetric internal loop. The presence of both bulges is required for uncoupling. The bulge-helix-bulge motif acts as a 'catalytic' antideterminant, which is distinct from recognition antideterminants, which inhibit RNase III binding.

Dynamic evidence for metal ion catalysis in the reaction mediated by a flap endonuclease

On the basis of structural work, metal ions are proposed to play a catalytic role in reactions mediated by many phosphoryl transfer enzymes. To gain dynamic support for such mechanisms, the role of metal ion cofactors in phosphate diester hydrolysis catalysed by a flap endonuclease has been studied. The pH maximal rate profiles were measured in the presence of various metal ion cofactors; in each case, a single ionic form of the enzyme/cofactor accounts for the pH dependence. The kinetic pK(a)s display good correlation with the acidity of the corresponding hexahydrated metal ions, which strongly suggests a role for metal-bound hydroxide, or its equivalent ionic species, in the reaction. Comparing rates of reaction in the pH-independent regions, a small negative beta(nuc) value is observed. This suggests that expected trends in the nucleophilicity of the various metal-bound hydroxides are balanced by a second form of metal ion catalysis that is related to the acidity of the hexahydrated metal ion. This is likely to be either electrophilic catalysis or leaving group activation.