Kinetic and titration methods for determination of active site contents of enzyme and catalytic antibody preparations

Exploring the Versatility of the Covalent Thiol-Alkyne Reaction with Substituted Propargyl Warheads: A Deciding Role for the Cysteine Protease

Terminal unactivated alkynes are nowadays considered the golden standard for cysteine-reactive warheads in activity-based probes (ABPs) targeting cysteine deubiquitinating enzymes (DUBs). In this work, we study the versatility of the thiol-alkyne addition reaction in more depth. Contrary to previous findings with UCHL3, we now show that covalent adduct formation can progress with substituents on the terminal or internal alkyne position. Strikingly, acceptance of alkyne substituents is strictly DUB-specific as this is not conserved among members of the same subfamily. Covalent adduct formation with the catalytic cysteine residue was validated by gel analysis and mass spectrometry of intact ABP-treated USP16CDWT and catalytically inactive mutant USP16CDC205A. Bottom-up mass spectrometric analysis of the covalent adduct with a deuterated propargyl ABP provides mechanistic understanding of the in situ thiol-alkyne reaction, identifying the alkyne rather than an allenic intermediate as the reactive species. Furthermore, kinetic analysis revealed that introduction of (bulky/electron-donating) methyl substituents on the propargyl moiety decreases the rate of covalent adduct formation, thus providing a rational explanation for the commonly lower level of observed covalent adduct compared to unmodified alkynes. Altogether, our work extends the scope of possible propargyl derivatives in cysteine targeting ABPs from unmodified terminal alkynes to internal and substituted alkynes, which we anticipate will have great value in the development of ABPs with improved selectivity profiles.

On the relationship between structure and catalytic effectiveness in solid surface-immobilized enzymes: Advances in methodology and the quest for a single-molecule perspective

The integration of enzymes with solid materials is important in many biotechnological applications, including the use of immobilized enzymes for biocatalytic synthesis. The development of functional enzyme-material composites is restrained by the lack of molecular-level insight into the behavior of enzymes in confined, surface-near environments. Here, we review recent advances in surface-sensitive spectroscopic techniques that push boundaries for the determination of enzyme structure and orientation at the solid-liquid interface. We discuss recent evidence from single-molecule studies showing that analyses sensitive to the temporal and spatial heterogeneities in immobilized enzymes can succeed in disentangling the effects of conformational stability and active-site accessibility on activity. Different immobilization methods involve distinct trade-off between these effects, thus emphasizing the need for a holistic (systems) view of immobilized enzymes for the rational development of practical biocatalysts.

High performance enzyme kinetics of turnover, activation and inhibition for translational drug discovery

INTRODUCTION

Enzymes are the macromolecular catalysts of many living processes and represent a sizable proportion of all druggable biological targets. Enzymology has been practiced just over a century during which much progress has been made in both the identification of new enzymes and the development of novel methodologies for enzyme kinetics. Areas covered: This review aims to address several key practical aspects in enzyme kinetics in reference to translational drug discovery research. The authors first define what constitutes a high performance enzyme kinetic assay. The authors then review the best practices for turnover, activation and inhibition kinetics to derive critical parameters guiding drug discovery. Notably, the authors recommend global progress curve analysis of dose/time dependence employing an integrated Michaelis-Menten equation and global curve fitting of dose/dose dependence. Expert opinion: The authors believe that in vivo enzyme and substrate abundance and their dynamics, binding modality, drug binding kinetics and enzyme's position in metabolic networks should be assessed to gauge the translational impact on drug efficacy and safety. Integrating these factors in a systems biology and systems pharmacology model should facilitate translational drug discovery.

Enzymes immobilized in mesoporous silica: a physical-chemical perspective

Mesoporous materials as support for immobilized enzymes have been explored extensively during the last two decades, primarily not only for biocatalysis applications, but also for biosensing, biofuels and enzyme-controlled drug delivery. The activity of the immobilized enzymes inside the pores is often different compared to that of the free enzymes, and an important challenge is to understand how the immobilization affects the enzymes in order to design immobilization conditions that lead to optimal enzyme activity. This review summarizes methods that can be used to understand how material properties can be linked to changes in enzyme activity. Real-time monitoring of the immobilization process and techniques that demonstrate that the enzymes are located inside the pores is discussed by contrasting them to the common practice of indirectly measuring the depletion of the protein concentration or enzyme activity in the surrounding bulk phase. We propose that pore filling (pore volume fraction occupied by proteins) is the best standard for comparing the amount of immobilized enzymes at the molecular level, and present equations to calculate pore filling from the more commonly reported immobilized mass. Methods to detect changes in enzyme structure upon immobilization and to study the microenvironment inside the pores are discussed in detail. Combining the knowledge generated from these methodologies should aid in rationally designing biocatalyst based on enzymes immobilized in mesoporous materials.

Evidence that the mechanism of antibody-catalysed hydrolysis of arylcarbamates can be determined by the structure of the immunogen used to elicit the catalytic antibody

A kinetically homogeneous anti-phosphate catalytic antibody preparation was shown to catalyse the hydrolysis of a series of O-aryl N-methyl carbamates containing various substituents in the 4-position of the O-phenyl group. The specific nature of the antibody catalysis was demonstrated by the adherence of these reactions to the Michaelis-Menten equation, the complete inhibition by a hapten analogue, and the failure of the antibody to catalyse the hydrolysis of the 2-nitrophenyl analogue of the 4-nitrophenylcarbamate substrate. Hammett sigma-rho analysis suggests that both the non-catalysed and antibody-catalysed reactions proceed by mechanisms in which development of the aryloxyanion of the leaving group is well advanced in the transition state of the rate-determining step. This is probably the ElcB (elimination-addition) mechanism for the non-catalysed reaction, but for the antibody-catalysed reaction might be either ElcB or B(Ac)2 (addition-elimination), in which the elimination of the aryloxy group from the tetrahedral intermediate has become rate-determining. This result provides evidence of the dominance of recognition of phenolate ion character in the phosphate hapten in the elicitation process, and is discussed in connection with data from the literature that suggest a B(Ac)2 mechanism, with rate-determining formation of the tetrahedral intermediate for the hydrolysis of carbamate substrates catalysed by an antibody elicited by a phosphonamidate hapten in which phenolate anion character is minimized. The present paper contributes to the growing awareness that small differences in the structure of haptens can produce large differences in catalytic characteristics.

Mechanism of action of DNA-hydrolyzing antibodies to DNA from blood of patients with systemic lupus erythematosus

Four fractions of IgG antibodies to native DNA (nDNA) were obtained from blood of patients with systemic lupus erythematosus (SLE). These antibodies displayed a thermostable DNA-hydrolyzing activity and were different in affinity for DNA-cellulose and sorption on DEAE-cellulose. DNA-hydrolyzing antibodies to nDNA are metal-dependent endonucleases, cause mainly single-strand breaks in DNA, and are active over a wide range of pH. By atomic-force microscopy, three-dimensional images of DNA complexes with DNA-hydrolyzing antibodies to nDNA were obtained with nanometer resolution, and a nonprocessive action mechanism was shown for the DNase activity of antibodies to nDNA.

Kinetic study of the HIV-1 DNA 3'-end processing

The 3'-processing of viral DNA extremities is the first step in the integration process catalysed by human immunodeficiency virus (HIV)-1 integrase (IN). This reaction is relatively inefficient and processed DNAs are usually detected in vitro under conditions of excess enzyme. Despite such experimental conditions, steady-state Michaelis-Menten formalism is often applied to calculate characteristic equilibrium/kinetic constants of IN. We found that the amount of processed product was not significantly affected under conditions of excess DNA substrate, indicating that IN has a limited turnover for DNA cleavage. Therefore, IN works principally in a single-turnover mode and is intrinsically very slow (single-turnover rate constant = 0.004 min(-1)), suggesting that IN activity is mainly limited at the chemistry step or at a stage that precedes chemistry. Moreover, fluorescence experiments showed that IN-DNA product complexes were very stable over the time-course of the reaction. Binding isotherms of IN to DNA substrate and product also indicate tight binding of IN to the reaction product. Therefore, the slow cleavage rate and limited product release prevent or greatly reduce subsequent turnover. Nevertheless, the time-course of product formation approximates to a straight line for 90 min (apparent initial velocity), but we show that this linear phase is due to the slow single-turnover rate constant and does not indicate steady-state multiple turnover. Finally, our data ruled out the possibility that there were large amounts of inactive proteins or dead-end complexes in the assay. Most of complexes initially formed were active although dramatically slow.

Evidence for 'lock and key' character in an anti-phosphonate hydrolytic antibody catalytic site augmented by non-reaction centre recognition: variation in substrate selectivity between an anti-phosphonate antibody, an anti-phosphate antibody and two hydrolytic enzymes

The substrate selectivities of an anti-phosphonate and an anti-phosphate kinetically homogeneous polyclonal catalytic antibody preparation and two hydrolytic enzymes were compared by using hapten-analogous and truncated carbonate and ester substrates each containing a 4-nitrophenolate leaving group. Syntheses of the truncated substrates devoid of recognition features in the non-leaving group parts of the substrates are reported. The relatively high kinetic selectivity of the more active anti-phosphonate antibody preparation is considered to depend on a relatively rigid catalytic site with substantial reaction centre specificity together with other important recognition interactions with the extended non-leaving group part of the substrate. In contrast, the less catalytically active, more flexible anti-phosphate antibody exhibits much lower kinetic selectivity for the substrate reaction centre comparable with that of the hydrolytic enzymes with activity much less dependent on recognition interactions with the non-leaving group part of the substrate. The ways in which haptenic flexibility and IgG architecture might contribute to the differential kinetic selectivities are indicated.

Improvement in hydrolytic antibody activity by change in haptenic structure from phosphate to phosphonate with retention of a common leaving-group determinant: evidence for the 'flexibility' hypothesis

To investigate the hypothesis that decreased hapten flexibility may lead to increased catalytic antibody activity, we used two closely related immunogens differing only in the flexibility of the atomic framework around the structural motif of the haptens, analogous to the reaction centre of the corresponding substrates. Identical leaving-group determinants in the haptens and identical leaving groups in the substrates removed the ambiguity inherent in some data reported in the literature. Anti-phosphate and anti-phosphonate kinetically homogeneous polyclonal catalytic antibody preparations were compared by using carbonate and ester substrates respectively, each containing a 4-nitrophenolate leaving group. Synthetic routes to a new phosphonate hapten and new ester substrate were developed. The kinetic advantage of the more rigid anti-phosphonate/ester system was demonstrated at pH 8.0 by a 13-fold advantage in k(cat)/k(non-cat) and a 100-fold advantage in the proficiency constant, k(cat)/k (non-cat) x K(m). Despite these differences, the pH-dependences of the kinetic and binding characteristics and the results of chemical modification studies suggest closely similar catalytic mechanisms. The possible origin of the kinetic advantage of the more rigid hapten/substrate system is discussed.

Polyclonal catalytic antibodies

Polyclonal catalytic antibodies offer advantages in the evaluation of immunogens and in the ease of production of large quantities of antibodies. They comprise the entire immune response of an animal to an immunogen where monoclonals represent a subset. Polyclonal antibodies are consequently particularly suitable for evaluating catalytic antibody responses generated by different haptens or a group of structurally related haptens. The authors reported the first polyclonal catalytic antibodies in 1990. An unexpected finding is that polyclonal catalytic antibodies show single-site kinetic behaviour, i.e. whatever structural heterogeneity exists, the kinetic behaviour is homogeneous. Many groups worldwide have since published work in this area. Three groups are prominent. The authors' group, a group based in Austin, Texas, and led by Iverson, and a Shanghai group. The authors' group works with sheep antibodies and has published mechanistic studies and, more recently, specificity studies that revealed the catalysis of a beta-lactam. Most of this work over a 10-year period was performed by using a single bleed from a single sheep, which gives an indication of the ease of production and utility of such catalytic antibodies. Iverson's group works with rabbit antibodies and has published much work on the evaluation of catalytic antibodies generated by structurally related haptens. The Shanghai group has concentrated on the studies of polyclonal catalytic antibodies for electrocyclic reactions where any danger of contaminating enzymes is reduced. The use of immunisation to generate therapeutically useful catalytic antibodies (necessarily polyclonal) in a host animal is an attractive target. Several groups are working towards this. The authors themselves have published in this area and promising recent studies come from a group working in France on immunisation to protect against nerve agents and a Texas group (based in Houston) that has demonstrated active immunisation to generate antibodies that catalyse the hydrolysis of a carbamate insecticide.

Detection of errors of interpretation in experiments in enzyme kinetics

Although modern statistical computing will often be the method of choice for analyzing kinetic data, graphic methods provide an important supplement that ought not to be neglected. Residual plots, or plots of differences between observed and calculated values against variables not expected to be correlated with these differences, permit a rapid judgment of whether data have been correctly interpreted and analyzed. The rapid increase in the frequency with which artificially modified or mutated enzymes are studied is making it less and less safe to assume that enzymes are stable under assay conditions, and there is thus an increased need for methods to check for enzyme stability, and a method for doing this is briefly described. Finally, the Scatchard plot (together with the Eadie-Hofstee plot) is used as an example to discuss the dangers of publishing derived information unaccompanied by any primary data.