Bacteriophage P2 and P4 morphogenesis: structure and function of the connector

Structure of the Capsid Size-Determining Scaffold of "Satellite" Bacteriophage P4

P4 is a mobile genetic element (MGE) that can exist as a plasmid or integrated into its Escherichia coli host genome, but becomes packaged into phage particles by a helper bacteriophage, such as P2. P4 is the original example of what we have termed "molecular piracy", the process by which one MGE usurps the life cycle of another for its own propagation. The P2 helper provides most of the structural gene products for assembly of the P4 virion. However, when P4 is mobilized by P2, the resulting capsids are smaller than those normally formed by P2 alone. The P4-encoded protein responsible for this size change is called Sid, which forms an external scaffolding cage around the P4 procapsids. We have determined the high-resolution structure of P4 procapsids, allowing us to build an atomic model for Sid as well as the gpN capsid protein. Sixty copies of Sid form an intertwined dodecahedral cage around the T = 4 procapsid, making contact with only one out of the four symmetrically non-equivalent copies of gpN. Our structure provides a basis for understanding the sir mutants in gpN that prevent small capsid formation, as well as the nms "super-sid" mutations that counteract the effect of the sir mutations, and suggests a model for capsid size redirection by Sid.

Bacteriophage P2

P2 is the original member of a highly successful family of temperate phages that are frequently found in the genomes of gram-negative bacteria. This article focuses on the organization of the P2 genome and reviews current knowledge about the function of each open reading frame.

Real-time sensing and discrimination of single chemicals using the channel of phi29 DNA packaging nanomotor

A highly sensitive and reliable method to sense and identify a single chemical at extremely low concentrations and high contamination is important for environmental surveillance, homeland security, athlete drug monitoring, toxin/drug screening, and earlier disease diagnosis. This article reports a method for precise detection of single chemicals. The hub of the bacteriophage phi29 DNA packaging motor is a connector consisting of 12 protein subunits encircled into a 3.6 nm channel as a path for dsDNA to enter during packaging and to exit during infection. The connector has previously been inserted into a lipid bilayer to serve as a membrane-embedded channel. Herein we report the modification of the phi29 channel to develop a class of sensors to detect single chemicals. The lysine-234 of each protein subunit was mutated to cysteine, generating 12-SH ring lining the channel wall. Chemicals passing through this robust channel and interactions with the SH group generated extremely reliable, precise, and sensitive current signatures as revealed by single channel conductance assays. Ethane (57 Da), thymine (167 Da), and benzene (105 Da) with reactive thioester moieties were clearly discriminated upon interaction with the available set of cysteine residues. The covalent attachment of each analyte induced discrete stepwise blockage in current signature with a corresponding decrease in conductance due to the physical blocking of the channel. Transient binding of the chemicals also produced characteristic fingerprints that were deduced from the unique blockage amplitude and pattern of the signals. This study shows that the phi29 connector can be used to sense chemicals with reactive thioesters or maleimide using single channel conduction assays based on their distinct fingerprints. The results demonstrated that this channel system could be further developed into very sensitive sensing devices.

Extensive proteolysis of head and inner body proteins by a morphogenetic protease in the giant Pseudomonas aeruginosa phage φKZ

Encased within the 280 kb genome in the capsid of the giant myovirus φKZ is an unusual cylindrical proteinaceous 'inner body' of highly ordered structure. We present here mass spectrometry, bioinformatic and biochemical studies that reveal novel information about the φKZ head and the complex inner body. The identification of 39 cleavage sites in 19 φKZ head proteins indicates cleavage of many prohead proteins forms a major morphogenetic step in φKZ head maturation. The φKZ head protease, gp175, is newly identified here by a bioinformatics approach, as confirmed by a protein expression assay. Gp175 is distantly related to T4 gp21 and recognizes and cleaves head precursors at related but distinct S/A/G-X-E recognition sites. Within the φKZ head there are six high-copy-number proteins that are probable major components of the inner body. The molecular weights of five of these proteins are reduced 35-65% by cleavages making their mature form similar (26-31 kDa), while their precursors are dissimilar (36-88 kDa). Together the six abundant proteins sum to the estimated mass of the inner body (15-20 MDa). The identification of these proteins is important for future studies on the composition and function of the inner body.

One-way traffic of a viral motor channel for double-stranded DNA translocation

Linear double-stranded DNA (dsDNA) viruses package their genome into a procapsid using an ATP-driven nanomotor. Here we report that bacteriophage phi29 DNA packaging motor exercises a one-way traffic property for dsDNA translocation from N-terminal entrance to C-terminal exit with a valve mechanism in DNA packaging, as demonstrated by voltage ramping, electrode polarity switching, and sedimentation force assessment. Without the use of gating control as found in other biological channels, the observed single direction dsDNA transportation provides a novel system with a natural valve to control dsDNA loading and gene delivery in bioreactors, liposomes, or high throughput DNA sequencing apparatus.

Translocation of double-stranded DNA through membrane-adapted phi29 motor protein nanopores

Biological pores have been used to study the transport of DNA and other molecules, but most pores have channels that allow only the movement of small molecules and single-stranded DNA and RNA. The bacteriophage phi29 DNA-packaging motor, which allows double-stranded DNA to enter the virus during maturation and exit during an infection, contains a connector protein with a channel that is between 3.6 and 6 nm wide. Here we show that a modified version of this connector protein, when reconstituted into liposomes and inserted into planar lipid bilayers, allows the translocation of double-stranded DNA. The measured conductance of a single connector channel was 4.8 nS in 1 M KCl. This engineered and membrane-adapted phage connector is expected to have applications in microelectromechanical sensing, microreactors, gene delivery, drug loading and DNA sequencing.

Construction of bacteriophage phi29 DNA packaging motor and its applications in nanotechnology and therapy

Nanobiotechnology involves the creation, characterization, and modification of organized nanomaterials to serve as building blocks for constructing nanoscale devices in technology and medicine. Living systems contain a wide variety of nanomachines and highly ordered structures of macromolecules. The novelty and ingenious design of the bacterial virus phi29 DNA packaging motor and its parts inspired the synthesis of this motor and its components as biomimetics. This 30-nm nanomotor uses six copies of an ATP-binding pRNA to gear the motor. The structural versatility of pRNA has been utilized to construct dimers, trimers, hexamers, and patterned superstructures via the interaction of two interlocking loops. The approach, based on bottom-up assembly, has also been applied to nanomachine fabrication, pathogen detection and the delivery of drugs, siRNA, ribozymes, and genes to specific cells in vitro and in vivo. Another essential component of the motor is the connector, which contains 12 copies of a protein gp10 to form a 3.6-nm central channel as a path for DNA. This article will review current studies of the structure and function of the phi29 DNA packaging motor, as well as the mechanism of motion, the principle of in vitro construction, and its potential nanotechnological and medical applications.

Viral nanomotors for packaging of dsDNA and dsRNA

While capsid proteins are assembled around single-stranded genomic DNA or RNA in rod-shaped viruses, the lengthy double-stranded genome of other viruses is packaged forcefully within a preformed protein shell. This entropically unfavourable DNA or RNA packaging is accomplished by an ATP-driven viral nanomotor, which is mainly composed of two components, the oligomerized channel and the packaging enzymes. This intriguing DNA or RNA packaging process has provoked interest among virologists, bacteriologists, biochemists, biophysicists, chemists, structural biologists and computational scientists alike, especially those interested in nanotechnology, nanomedicine, AAA+ family proteins, energy conversion, cell membrane transport, DNA or RNA replication and antiviral therapy. This review mainly focuses on the motors of double-stranded DNA viruses, but double-stranded RNA viral motors are also discussed due to interesting similarities. The novel and ingenious configuration of these nanomotors has inspired the development of biomimetics for nanodevices. Advances in structural and functional studies have increased our understanding of the molecular basis of biological movement to the point where we can begin thinking about possible applications of the viral DNA packaging motor in nanotechnology and medical applications.

Macromolecular mass spectrometry and electron microscopy as complementary tools for investigation of the heterogeneity of bacteriophage portal assemblies

The success of electron-cryo microscopy (cryo-EM) and image reconstruction of cyclic oligomers, such as the viral and bacteriophage portals, depends on the accurate knowledge of their order of symmetry. A number of statistical methods of image analysis address this problem, but often do not provide unambiguous results. Direct measurement of the oligomeric state of multisubunit protein assemblies is difficult when the number of subunits is large and one subunit renders only a small increment to the full size of the oligomer. Moreover, when mixtures of different stochiometries are present techniques such as analytical centrifugation or size-exclusion chromatography are also less helpful. Here, we use electrospray ionization mass spectrometry to directly determine the oligomeric states of the in vitro assembled portal oligomers of the phages P22, Phi-29 and SPP1, which range in mass from 430 kDa to about 1 million Da. Our data unambiguously reveal that the oligomeric states of Phi-29 and SPP1 portals were 12 and 13, respectively, in good agreement with crystallographic and electron microscopy data. However, in vitro assembled P22 portals were a mixture of 11- and 12-mer species in an approximate ratio of 2:1, respectively. A subsequent reference-free alignment of electron microscopy images of the P22 portal confirmed this mixture of oligomeric states. We conclude that macromolecular mass spectrometry is a valuable tool in structural biology that can aide in the determination of oligomeric states and symmetry of assemblies, providing a good starting point for improved image analysis of cryo-EM data.

Portal fusion protein constraints on function in DNA packaging of bacteriophage T4

Architecturally conserved viral portal dodecamers are central to capsid assembly and DNA packaging. To examine bacteriophage T4 portal functions, we constructed, expressed and assembled portal gene 20 fusion proteins. C-terminally fused (gp20-GFP, gp20-HOC) and N-terminally fused (GFP-gp20 and HOC-gp20) portal fusion proteins assembled in vivo into active phage. Phage assembled C-terminal fusion proteins were inaccessible to trypsin whereas assembled N-terminal fusions were accessible to trypsin, consistent with locations inside and outside the capsid respectively. Both N- and C-terminal fusions required coassembly into portals with approximately 50% wild-type (WT) or near WT-sized 20am truncated portal proteins to yield active phage. Trypsin digestion of HOC-gp20 portal fusion phage showed comparable protection of the HOC and gp20 portions of the proteolysed HOC-gp20 fusion, suggesting both proteins occupy protected capsid positions, at both the portal and the proximal HOC capsid-binding sites. The external portal location of the HOC portion of the HOC-gp20 fusion phage was confirmed by anti-HOC immuno-gold labelling studies that showed a gold 'necklace' around the phage capsid portal. Analysis of HOC-gp20-containing proheads showed increased HOC protein protection from trypsin degradation only after prohead expansion, indicating incorporation of HOC-gp20 portal fusion protein to protective proximal HOC-binding sites following this maturation. These proheads also showed no DNA packaging defect in vitro as compared with WT. Retention of function of phage and prohead portals with bulky internal (C-terminal) and external (N-terminal) fusion protein extensions, particularly of apparently capsid tethered portals, challenges the portal rotation requirement of some hypothetical DNA packaging mechanisms.

The gpQ portal protein of bacteriophage P2 forms dodecameric connectors in crystals

Double-stranded bacteriophages code for a protein called a connector or portal protein that serves as the entry and exit portal for DNA during genome packaging and ejection, as well as the connection point between heads and tails, and possibly as a nucleator for capsid assembly. The gpQ connector protein from bacteriophage P2 has been overexpressed in Escherichia coli and purified by sucrose gradient centrifugation. Negative stain electron microscopy and image analysis revealed a 135 A diameter dodecameric ring structure with a central 25 A hole. The connector showed a strong propensity to aggregate at low ionic strength and would form microcrystalline structures in solution. Consequently, the connectors were crystallized by hanging-drop vapor diffusion against low ionic strength buffer. Two crystal forms were observed: a P4(1)22 form with unit cell parameters a=b=96.33 A and c=454.42 A that diffracted X-rays to 4.5 A resolution and an I222 crystal form with a=168.86 A, b=171.88 A and c=168.68 A that diffracted to 4.1A resolution. Self-rotation functions confirmed the presence of 12-fold symmetry in the crystals.

DNA knots reveal a chiral organization of DNA in phage capsids

Icosahedral bacteriophages pack their double-stranded DNA genomes to near-crystalline density and achieve one of the highest levels of DNA condensation found in nature. Despite numerous studies, some essential properties of the packaging geometry of the DNA inside the phage capsid are still unknown. We present a different approach to the problems of randomness and chirality of the packed DNA. We recently showed that most DNA molecules extracted from bacteriophage P4 are highly knotted because of the cyclization of the linear DNA molecule confined in the phage capsid. Here, we show that these knots provide information about the global arrangement of the DNA inside the capsid. First, we analyze the distribution of the viral DNA knots by high-resolution gel electrophoresis. Next, we perform Monte Carlo computer simulations of random knotting for freely jointed polygons confined to spherical volumes. Comparison of the knot distributions obtained by both techniques produces a topological proof of nonrandom packaging of the viral DNA. Moreover, our simulations show that the scarcity of the achiral knot 4(1) and the predominance of the torus knot 5(1) over the twist knot 5(2) observed in the viral distribution of DNA knots cannot be obtained by confinement alone but must include writhe bias in the conformation sampling. These results indicate that the packaging geometry of the DNA inside the viral capsid is writhe-directed.

Structure and function of phi29 hexameric RNA that drives the viral DNA packaging motor: review

One notable feature of linear dsDNA viruses is that, during replication, their lengthy genome is squeezed with remarkable velocity into a preformed procapsid and packed into near crystalline density. A molecular motor using ATP as energy accomplishes this energetically unfavorable motion tack. In bacterial virus phi29, an RNA (pRNA) molecule is a vital component of this motor. This 120-base RNA has many novel and distinctive features. It contains strong secondary structure, is tightly folded, and unusually stable. Upon interaction with ion and proteins, it has a knack to adapt numerous conformations to perform versatile function. It can be easily manipulated to form stable homologous monomers, dimers, trimers and hexamers. As a result, many unknown properties of RNA have been and will be unfolded by the study of this extraordinary molecule. This article reviews the structure and function of this pRNA and focuses on novel methods and unique approaches that lead to the illumination of its structure and function.

Preliminary crystallographic analysis of the bacteriophage P22 portal protein

Portal proteins are components of large oligomeric dsDNA pumps connecting the icosahedral capsid of tailed bacteriophages to the tail. Prior to the tail attachment, dsDNA is actively pumped through a central cavity formed by the subunits. We have studied the portal protein of bacteriophage P22, which is the largest connector characterized among the tailed bacteriophages. The molecular weight of the monomer is 82.7 kDa, and it spontaneously assembles into an oligomeric structure of approximately 1.0 MDa. Here we present a preliminary biochemical and crystallographic characterization of this large macromolecular complex. The main difficulties related to the crystallization of P22 portal protein lay in the intrinsic dynamic nature of the portal oligomer. Recombinant connectors assembled from portal monomers expressed in Escherichia coli form rings of different stoichiometry in solution, which cannot be separated on the basis of their size. To overcome this intrinsic heterogeneity we devised a biochemical purification that separates different ring populations on the basis of their charge. Small ordered crystals were grown from drops containing a high concentration of the kosmotropic agent tert-butanol and used for data collection. A preliminary crystallographic analysis to 7.0-A resolution revealed that the P22 portal protein crystallized in space group I4 with unit cell dimensions a=b=409.4A, c=260.4A. This unit cell contains a total of eight connectors. Analysis of the noncrystallographic symmetry by the self-rotation function unambiguously confirmed that bacteriophage P22 portal protein is a dodecamer with a periodicity of 30 degrees. The cryo-EM reconstruction of the dodecahedral bacteriophage T3 portal protein will be used as a model to initiate phase extension and structure determination.

Knotting probability of DNA molecules confined in restricted volumes: DNA knotting in phage capsids

When linear double-stranded DNA is packed inside bacteriophage capsids, it becomes highly compacted. However, the phage is believed to be fully effective only if the DNA is not entangled. Nevertheless, when DNA is extracted from a tailless mutant of the P4 phage, DNA is found to be cyclic and knotted (probability of 0.95). The knot spectrum is very complex, and most of the knots have a large number of crossings. We quantified the frequency and crossing numbers of these knots and concluded that, for the P4 tailless mutant, at least half the knotted molecules are formed while the DNA is still inside the viral capsid rather than during extraction. To analyze the origin of the knots formed inside the capsid, we compared our experimental results to Monte Carlo simulations of random knotting of equilateral polygons in confined volumes. These simulations showed that confinement of closed chains to tightly restricted volumes results in high knotting probabilities and the formation of knots with large crossing numbers. We conclude that the formation of the knots inside the viral capsid is driven mainly by the effects of confinement.

In vitro assembly of bacteriophage P4 procapsids from purified capsid and scaffolding proteins

Bacteriophage P4 is a satellite virus of bacteriophage P2, which has acquired the ability to utilize the structural gene products of P2 to assemble its own capsid. The normal P2 capsid has a T = 7 icosahedral structure comprised of the gpN-derived capsid protein, whereas the capsid produced under the control of P4 has a smaller, T = 4 structure. The protein responsible for this size determination is the P4-coded gene product Sid, which forms an external scaffold on the P4 procapsid. Using an in vitro assembly system, we show that gpN and Sid can coassemble into procapsid-like particles, indistinguishable from those produced in vivo, in the absence of any other gene products. The fidelity of the assembly reaction is enhanced by the inclusion of PEG and has a pH optimum between 8.0 and 8.5. Analysis of the assembly properties of truncated versions of Sid and gpN suggests that the amino-terminal part of Sid is involved in gpN binding, while the carboxyl-terminal part forms trimeric Sid-Sid interactions, and that the first 31 amino acids of gpN are required for binding to Sid as well as for size determination.

Structural analysis of the bacteriophage T3 head-to-tail connector

The connector protein of bacteriophage T3, p8, has been overexpressed in Escherichia coli. Purification of the oligomers built by several copies of p8 reveals a mixed population of dodecamers and tridecamers. The percentages of these two types of oligomers differ in every culture growth, indicating that assembly of this protein depends upon the conditions of the expression system. Those cultures that generated a majority of dodecamers allowed, after purification of the connectors, the two-dimensional crystallization of the dodecamers in a tetragonal arrangement, while the tridecamers did not form crystals. The processing and averaging of several images of frozen-hydrated crystals and their internal phase comparison shows that the crystals are arranged in a P42(1)2 space group, with cell unit dimensions of 165 x 165 A. The three-dimensional reconstruction generated with images of crystals ranging from 0 degrees to 60 degrees tilt reveals a wide domain surrounded by 12 protrusions and a narrow domain that serves to interact with the tail of the bacteriophage. A channel runs along the connector wide enough to allow the translocation of a double-stranded DNA molecule into the prohead. The general structure of the T3 connector is very similar to those obtained for other nonrelated bacteriophages and strongly suggests that the shape of this important viral structure is intimately related to its function.

Mapping the inter-RNA interaction of bacterial virus phi29 packaging RNA by site-specific photoaffinity cross-linking

During replication, the lengthy genome of double-stranded DNA viruses is translocated with remarkable velocity into a limited space within the procapsid. The question of how this fascinating task is accomplished has long been a puzzle. Our recent investigation suggests that phi29 DNA packaging is accomplished by a mechanism similar to the driving of a bolt with a hex nut and that six packaging RNAs (pRNAs) form a hexagonal complex to gear the DNA-translocating machine (Chen, C., and Guo, P. (1997) J. Virol. 71, 3864-3871; Zhang, F., Lemieux, S., Wu, X., St.-Arnaud, S., McMurray, C. T., Major, F., and Anderson, D. (1998) Mol. Cell 2, 141-147; Guo, P., Zhang, C., Chen, C., Garver, K., and Trottier, M., (1998) Mol. Cell 2, 149-155). In the current study, circularly permuted pRNAs were used to position an azidophenacyl photoreactive cross-linking agent specifically at a strategic site that was predicted to be involved in pRNA-pRNA interaction. Cross-linked pRNA dimers were isolated, and the sites of cross-link were mapped by primer extension. The cross-linked pRNA dimer retained full activity in phi29 procapsid binding and genomic DNA translocation, indicating that the cross-link distance constraints identified in dimer formation reflect the native pRNA complex. Both cross-linked dimers either containing or not containing the interlocking loops for programmed hexamer formation bound procapsid equally well; however, only the one containing the interlocking loops programmed for hexamer formation was active in phi29 DNA packaging. The cross-linked pRNA dimers were also identified as the minimum binding unit necessary for procapsid binding. Primer extension of the purified cross-linked pRNA dimers revealed that base G(82) was cross-linked to bases G(39), G(40), A(41), C(49), G(62), C(63), and C(64), which contribute to the formation of the three-way junction, suggesting that these bases are proximate in the formation of pRNA tertiary structure. Interestingly, the photoaffinity agent in the left interacting loop did not cross-link directly to the right loop as expected but cross-linked to bases adjacent to the right loop. These data provide a background for future modeling of pRNA tertiary structure.