Chitosan: A Promising Biomaterial for Tissue Engineering Scaffolds

Biofabrication paradigms in corneal regeneration: bridging bioprinting techniques, natural bioinks, and stem cell therapeutics

Corneal diseases are a major cause of vision loss worldwide. Traditional methods like corneal transplants from donors are effective but face challenges like limited donor availability and the risk of graft rejection. Therefore, new treatment methods are essential. This review examines the growing field of bioprinting and biofabrication in corneal tissue engineering. We begin by discussing various bioprinting methods such as stereolithography, inkjet, and extrusion printing, highlighting their strengths and weaknesses for eye-related uses. We also explore how biological tissues are made suitable for bioprinting through a process called decellularization, which can be achieved using chemical, physical, or biological methods. The review then looks at natural materials, known as bioinks, used in bioprinting. We focus on materials like gelatin, collagen, fibrin, chitin, chitosan, silk fibroin, and alginate, examining their mechanical and biological properties. The importance of hydrogel scaffolds, particularly those based on collagen and other materials, is also discussed in the context of repairing corneal tissue. Another key area we cover is the use of stem cells in corneal regeneration. We pay special attention to limbal epithelial stem cells and mesenchymal stromal cells, highlighting their roles in this process. The review concludes with an overview of the latest advancements in corneal tissue bioprinting, from early techniques to advanced methods of delivering stem cells using bioengineered materials. In summary, this review presents the current state and future potential of bioprinting and biofabrication in creating functional corneal tissues, highlighting new developments and ongoing challenges with a view towards restoring vision.

The Diamond Concept Enigma: Recent Trends of Its Implementation in Cross-linked Chitosan-Based Scaffolds for Bone Tissue Engineering

An increasing number of publications over the past ten years have focused on the development of chitosan-based cross-linked scaffolds to regenerate bone tissue. The design of biomaterials for bone tissue engineering applications relies heavily on the ideals set forth by a polytherapy approach called the "Diamond Concept". This methodology takes into consideration the mechanical environment, scaffold properties, osteogenic and angiogenic potential of cells, and benefits of osteoinductive mediator encapsulation. The following review presents a comprehensive summarization of recent trends in chitosan-based cross-linked scaffold development within the scope of the Diamond Concept, particularly for nonload-bearing bone repair. A standardized methodology for material characterization, along with assessment of in vitro and in vivo potential for bone regeneration, is presented based on approaches in the literature, and future directions of the field are discussed.

Chitosan/Phenolic Compounds Scaffolds for Connective Tissue Regeneration

Chitosan-based scaffolds modified by gallic acid, ferulic acid, and tannic acid were fabricated. The aim of the experiment was to compare the compatibility of scaffolds based on chitosan with gallic acid, ferulic acid, or tannic acid using the in vivo method. For this purpose, materials were implanted into rabbits in the middle of the latissimus dorsi muscle length. A scaffold based on unmodified chitosan was implanted by the same method as a control. Moreover, the Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) spectra and scanning electron microscope (SEM) observations were made to study the interactions between chitosan and phenolic acids. Additionally, antioxidant properties and blood compatibility were investigated. The results showed that all studied materials were safe and non-toxic. However, chitosan scaffolds modified by gallic acid and tannic acid were resorbed faster and, as a result, tissues were organized faster than those modified by ferulic acid or unmodified.

Biomedyczne właściwości chitozanu – zastosowanie w inżynierii tkankowej Biomedical properties of chitosan: Application in tissue engineering

Inżynieria tkankowa to interdyscyplinarna dziedzina badań, która stosuje zasady inżynierii i nauk przyrodniczych do opracowywania substytutów biologicznych, przywracania, utrzymywania lub poprawy funkcji tkanek. Łączy medycy-nę kliniczną, inżynierię mechaniczną, materiałoznawstwo i biologię molekularną. Chitozan jest związkiem, który może być stosowany na szeroką skalę w biomedycynie, m.in. jako nośnik leków, nici chirurgiczne, materiały opatrunkowe przeznaczone do przyspieszonego gojenia ran oraz rusztowania komórkowe w inżynierii tkankowej. Chitozon spełnia najważniejsze kryteria dla biomateriałów, m.in. kompatybilność, odpowiednie właściwości mechaniczne, morfologia i porowatość, nietoksyczność i biodegradowalność. Rusztowania chitozanowe mogą sprzyjać adhezji, różnicowaniu i proliferacji na powierzchni komórek. Z chitozanu można tworzyć różne formy funkcjonalne w zależności od potrzeb i wymagań, w tym: hydrożele 3D, gąbki 3D, folie i membrany oraz nanowłókna. Ze względu na unikalne właściwości fizykochemiczne biopolimer ten może być również wykorzystany do oczyszczania białek terapeutycznych z endotoksyn bakteryjnych, co jest dziś istotnym problemem w oczyszczaniu produktu końcowego w zastosowaniach medycznych. Obecnie terapie oparte na białkach rekombinowanych znajdują szerokie zastosowanie w terapiach celowanych, inżynierii tkankowej oraz szeroko pojętej medycynie regeneracyjnej. Dlatego tak ważny jest współistniejący, dobrze zapro-jektowany system oczyszczania produktu białkowego, który nie zmieni swoich zasadniczych właściwości. Artykuł jest przeglądem aktualnych badań nad zastosowaniem materiałów bioaktywnych na bazie chitozanu w medycynie regene-racyjnej różnych tkanek i narządów (m.in. tkanki chrzęstnej i kostnej, tkanki skórnej czy tkanki nerwowej).

Assessment of various crosslinking agents on collagen/chitosan scaffolds for myocardial tissue engineering

Suitable material for scaffolds that support cell attachment, proliferation, vascularization and contraction has always been a challenge in myocardial tissue engineering. Much research effort has been focused on natural polymers including collagen, gelatin, chitosan, fibrin, alginate, etc. Among them, a collagen/chitosan composite scaffold was widely used for myocardial tissue engineering. Due to the non-proliferative and contractile characteristics of cardiomyocytes, the biocompatibility and mechanical properties of the scaffolds are extremely important for supporting intercellular connection and tissue function for myocardial tissue engineering. To the best of our knowledge, the three crosslinking agents (glutaraldehyde (GTA), genipin (GP), tripolyphosphate (TPP)) have not yet been comparatively studied in myocardial tissue engineering. Thus, the aim of this study is to compare and identify the crosslinking effect of GTA, GP and TPP for myocardial tissue engineering. The collagen/chitosan scaffolds prepared with various crosslinking agents were fabricated and evaluated for physical characteristics, biocompatibility and contractile performance. All the groups of scaffolds exhibited high porosity (>65%) and good swelling ratio suitable for myocardial tissue engineering. TPP crosslinked scaffolds showed excellent mechanical properties, with their elastic modulus (81.0 ± 8.1 kPa) in the physiological range of native myocardium (20∼100 kPa). Moreover, GP and TPP crosslinked scaffolds exhibited better biocompatibility than GTA crosslinked scaffolds, as demonstrated by the live/dead staining and proliferation assay. In addition, cardiomyocytes within TPP crosslinked scaffolds showed the highest expression of cardiac-specific marker protein and the best contractile performance. To conclude, of the three crosslinking agents, TPP was recommended as the most suitable crosslinking agent for collagen/chitosan scaffold in myocardial tissue engineering.

Chitosan films for regenerative medicine: fabrication methods and mechanical characterization of nanostructured chitosan films

Regenerative medicine is continuously facing new challenges and it is searching for new biocompatible, green/natural polymer materials, possibly biodegradable and non-immunogenic. Moreover, the critical importance of the nano/microstructuring of surfaces is overall accepted for their full biocompatibility and in vitro/in vivo performances. Chitosan is emerging as a promising biopolymer for tissue engineering and its application can be further improved by exploiting its nano/microstructuration. Here, we report the state of the art of chitosan films and scaffolds nano/micro-structuration. We show that it is possible to obtain, by solvent casting, chitosan thin films with good mechanical properties and to structure them at the microscale and even nanoscale level, with resolutions down to 100 nm.

Evaluation of physicochemical, mechanical and biological properties of chitosan/carboxymethyl cellulose reinforced with multiphasic calcium phosphate whisker-like fibers for bone tissue engineering

In this study porous scaffolds of chitosan (CS) and carboxymethyl cellulose (CMC) reinforced with whisker-like biphasic and triphasic calcium phosphate fibers were fabricated by freeze drying method. The effect of addition of CMC, fiber type and content on the mechanical, physicochemical and biological properties of the composite scaffolds was evaluated. The fibers were synthesized by homogenous precipitation method and were characterized. Biphasic fibers contained two phases of hydroxyapatite (HA) and monetite, and triphasic fibers consisted of HA, β-tricalcium phosphate and calcium pyrophosphate and were 20-270 μm and 20-145 μm in length, respectively. The composite scaffolds exhibited desirable microstructures with high porosity (61-75%) and interconnected pores in range of 35-200 μm. Addition of CMC to CS led to a significant improvement in the mechanical properties (up to 150%) but did not affect the water uptake ability and biocompatibility. Both fibers improved the in vitro proliferation, attachment and mineralization of MG63 cells on scaffolds as evidenced by MTT assay, DAPI staining, SEM and Alizarin red staining. Triphasic fibers were more effective in reinforcing the scaffolds and resulted in higher cell viability. Composite scaffolds of CS and CMC reinforced with 50 wt% triphasic fibers were superior in terms of mechanical and biological properties and showed compressive strength and modulus of 150 kPa and 3.08 MPa, respectively, which is up to 300% greater than pure CS scaffolds. The findings indicate that the developed composite scaffolds are potential candidates for bone tissue engineering although they need further enhancement in mechanical properties.

Preparation and Characterization of Chitosan/β-Glycerophosphate Thermal-Sensitive Hydrogel Reinforced by Graphene Oxide

Thermal-sensitive hydrogel based on chitosan (CS) and β-glycerophosphate (GP) has shown good biocompatibility and biodegradability. But the application of such hydrogel is limited due to its poor mechanical property. Recently, graphene oxide(GO) is widely used as a reinforcement agent to prepare nanocomposites with different polymers for improving the properties of the materials. In this study, CS/GP-based hydrogels with different weight ratio of GO/CS (0.5, 1, 2%) were fabricated. The gelation time of the hydrogels at body temperature was evaluated by tube inverting method. The gelation process during heating was monitored by rheological measurement. The morphology, porosities, chemical structure, swelling properties of the lyophilized hydrogels were investigated by scanning electron microscopy, liquid displacement method, Fourier transform infrared spectroscopy and gravimetric method. Mechanical property of the hydrogels was analyzed by rheological measurement and unconfined compression test. MC3T3-E1 mouse pre-osteoblast cell line was used to assess the biological properties of the hydrogels. The results obtained from those assessments revealed that the addition of GO into CS/GP improved the properties of the prepared hydrogels without changing the high porous and interconnected microstructure and swelling ability of the hydrogels. The gelation time at body temperature was significantly reduced by nearly 20% with the addition of small amount of GO (0.5% weight ratio of CS). The mechanical properties of the hydrogels containing GO were improved significantly over that of CS/GP. The storage (G′)/loss (G″) moduli of the hydrogels with GO were 1.12 to 1.69 times that of CS/GP at the gelling temperature. The Young's modulus of 0.5%GO/CS/GP hydrogel is 1.76 times that of CS/GP. Moreover, the 0.5%GO/CS/GP hydrogel revealed remarkable biological affinity such as cellular attachment, viability and proliferation. All of these results suggest that 0.5%GO/CS/GP hydrogel has great potential for practical application in biomedical field.

Norfloxacin-loaded collagen/chitosan scaffolds for skin reconstruction: Preparation, evaluation and in-vivo wound healing assessment

Biomaterial scaffolds are versatile tools as drug carrier for treatment of wounds. A series of norfloxacin-loaded scaffolds were synthesized for treatment of wounds by combining collagen with two different types of chitosan using freeze-drying technique. Subsequently, scaffolds were screened in terms of morphology, water absorption and retention capacity, biodegradation, ex-vivo bioadhesive strength, in-vitro drug release biological compatibility, X-ray diffractometry, differential scanning calorimetry as well as in-vivo evaluation. The results indicate that the scaffold mechanical strength is dependent on the type of used chitosan. The prepared scaffolds contained interconnected porous architecture. The scaffolds had high water uptake and retention capacity with extended biodegradation rate. Scaffolds prepared with chitosan HCl showed superior bioadhesive strength compared to those prepared with low molecular weight chitosan. All scaffolds showed almost 100% drug release within 24h. As identified by the terahertz pulsed imaging measurements, there is single scaffold area with the same concentration. After 28 days of wound dressing with selected norfoloxacin-loaded or unloaded collagen/chitosan scaffolds in Albino rats, it was found that the tissue regeneration time was fast compared to non-treated wounds. Furthermore, the drug-loaded scaffolds showed normal structure of an intact epidermal layer as well as the underlying dermis as revealed by histopathological studies. The obtained results suggest that the investigated norfloxacin-loaded collagen/chitosan scaffold is a potential candidate for skin regeneration application.

SYNTHESIS AND CHARACTERISATION OF ELECTROSPUN CHITOSAN MEMBRANES REINFORCED BY HALLOYSITE NANOTUBES

We report on the electrospinning method to synthesize and characterise chitosan membranes reinforced by halloysite nanotubes (HNTs). The synthesis process addressed two levels of HNTs concentration, i.e., 2 and 5 wt.%. Tensile testing was carried out to determine the strength (σ), strain (ε) at σ and elastic modulus (E) of the membranes. Tensile test data revealed that the membranes reinforced with 5 wt.% HNTs yielded the highest E (0.153 ± 0.02 GPa) and strength (22.53 ± 8.57 MPa). Electron micrographs of the fractured surfaces showed uniform dispersions of HNTs in the chitosan matrix. Infrared spectra indicated interactions between chitosan and inner and outer surfaces of HNTs. Thermogravimetric analysis demonstrated an increase in thermal stability with the addition of HNTs. Membranes immersed in simulated body fluid system for 28 days revealed the formation of dense apatite blocks with the addition of HNTs. Surface roughness increased with the addition of HNTs resulted a rise in degree of contact angle.