Structure and Bonding in Boron-Containing Macrocycles and Cages — Comparison to Related Structures with Other Elements Including Organic Molecules. In: Roesky HW, Atwood DA, editors. Group 13 Chemistry I. Berlin: Springer Berlin Heidelberg; 2002. pp. 1-56. [DOI: 10.1007/3-540-47808-6_1]

Boronic acid as an efficient anchor group for surface modification of solid polyvinyl alcohol

We report the use of boronic acid as an anchor group for surface modification of solid polyvinyl alcohol (PVA); the surfaces of PVA microparticles, films, and nanofibers were chemically modified with boronic acid-appended fluorescent dyes through boronate esterification using a simple soaking technique in a short time under ambient conditions.

Supramolecular gels based on boronate esters and imidazolyl donors

Dative boron-nitrogen bonds can be used for the controlled assembly of boronate esters and N-donor ligands. So far, most investigations have focused on crystalline assemblies. In contrast, there are very few reports about soft materials based on dative B-N bonds. Here, we describe the formation of gels by aggregation of diboronate esters and ditopic bisimidazolyl donor ligands. Analyses of low molecular weight model compounds by NMR spectroscopy, isothermal titration calorimetry, and X-ray crystallography reveal that imidazolyl ligands form particularly strong dative bonds with boronate esters. The strong interaction allows gel formation in competitive polar solvents such as THF and acetone. In less polar solvents, very low critical gel concentrations of down to 0.02 wt% are observed. By using a diboronate ester linked by an azobenzene group, it is possible to form a photoresponsive gel.

Preparation of dipyrrins from F-BODIPYs by treatment with methanesulfonic acids

Compatible with highly reactive functionalities workable with strongly electron-poor starting products.

2,6-Dihy-droxy-4-oxo-2-(pyridin-1-ium-3-yl)-4H-1,3,2-benzodioxaborinin-2-ide 0.67-hydrate

The asymmetric unit of the title compound, C₁₂H₁₀BNO₅·0.67H₂O, contains three independent pyridinylboronic acid esters adopting zwitterionic forms and two water mol­ecules. The six-membered heterocyclic rings in the boronic esters have half-chair conformations and the deviations of the B atoms from the boronate mean planes range from 0.456 (3) to 0.657 (3) Å. All of the B atoms have tetra­hedral coordination environments, with B—O and B—C bond lengths of 1.446 (4)–1.539 (3) and 1.590 (5)–1.609 (5) Å, respectively. In the crystal, the ester and water mol­ecules are linked into a three-dimensional network by a large number of O—H⋯O, N—H⋯O and C—H⋯O hydrogen bonds. The crystal packing is further accomplished by π–π inter­actions, with centroid–centroid distances of 3.621 (4)–3.787 (4) Å.

(E)-2-{[2-(2-Hy-droxy-ethyl-amino)-ethyl-imino]-meth-yl}phenol

The asymmetric unit of the title compound, C(11)H(16)N(2)O(2), contains two independent conformational isomers which show intra-molecular aromatic-imine O-H⋯N hydrogen bonds. In the crystal, neighboring mol-ecules are linked through inter-molecular aliphatic-aliphatic O-H⋯N, aliphatic-aromatic N-H⋯O and C-H⋯O inter-actions into hydrogen-bonded layers parallel to the ab plane.

PXPd-catalyzed borylation of aniline derivatives

Addition of pinacolborane (HBO2C2Me4) to 2-iodoaniline can be catalyzed using a number of palladium complexes, including [(t-Bu)2PCl]2PdCl2 (PXPd), to give the corresponding boronate ester 2-H2NC6H4(BO2C2Me4) in excellent yields. The PXPd system could also be used in the catalyzed borylation of substituted anilines to give the corresponding aminoboronate esters in moderate to high yields.

3-Amino-phenyl-boronic acid monohydrate

In the title compound, C(6)H(8)BNO(2)·H(2)O, the almost planar boronic acid mol-ecules (r.m.s. deviation = 0.044 Å) form inversion dimers, linked by pairs of O-H⋯O hydrogen bonds. The water mol-ecules link these dimers into [100] chains by way of O-H⋯O hydrogen bonds, and N-H⋯O links generate (100) sheets.

Conjugated polymer sensors built on pi-extended borasiloxane cages

An efficient 2 + 2 cyclocondensation with dihydroxysilane converted simple arylboronic acids to bifunctional borasiloxane cage molecules, which were subsequently electropolymerized to furnish air-stable thin films. The extended [p,pi]-conjugation that defines the rigid backbone of this new conjugated polymer (CP) motif gives rise to longer-wavelength UV-vis transitions upon oxidative doping, the spectral window and intensity of which can be modified by interaction with Lewis basic reagents. Notably, this boron-containing CP undergoes a rapid and reversible color change from green to orange upon exposure to volatile amine samples under ambient conditions. This direct naked-eye detection scheme can best be explained by invoking the reversible B-N dative bond formation that profoundly influences the p-pi* orbital overlap.

Self-repairing polymers: poly(dioxaborolane)s containing trigonal planar boron

The molecular weight of poly(dioxaborolane)s can be controlled during the polymerization reaction or through post-polymerization processing in such a manner that hydrolytic damage to these materials may be repaired, thereby regenerating the polymer.

Preparation and Structural Characterization of Three Types of Homo- and Heterotrinuclear Boron Complexes: Salen{[B−O−B][O2BOH]}, Salen{[B−O−B][O2BPh]}, and Salen{[B−O−B][O2P(O)Ph]}

Three types of homo- and heterotrinuclear boron complexes have been obtained in moderate to good yields from reactions of salen-type ligands with boric acid and combinations of boric acid with phenylboronic and phenylphosphonic acid. The products are air-stable and have relatively high melting points (>290 degrees C) but are poorly soluble or insoluble in common organic solvents. They have been characterized as far as possible by elemental analysis, mass spectrometry, IR, (1)H, (11)B, and (31)P NMR spectroscopy, and X-ray crystallography. Furthermore, theoretical calculations have been performed for representative examples to permit a complete comparison of the different structure types. A detailed analysis of the molecular structures showed that the complexes are constructed around a central B(3)O(3) or B(2)PO(3) ring. The salen ligands are attached to two boron atoms of these rings, which have therefore tetrahedral coordination geometries. The complexes contain seven- and eight-membered heterocycles of the B(2)C(n)ON(2) (n = 2, 3) type with chair or twisted-chair and boat-chair or chair-chair conformations, respectively. In the homotrinuclear complexes one of the three boron atoms is three-coordinate and can therefore still act as Lewis acid, thus making these products interesting for catalytic applications, e.g. in asymmetric synthesis. Depending on the substitutents attached to the boron atoms, these complexes show a relationship with either trimetaboric acid, boroxine, or the tetraborate dianion found in Borax.

Formation of Inclusion Organoactinide Complexes with Boron-Containing Macrocycles

Reaction of the organoactinide complexes (C5Me5)2AnMe2 (An = Th, U) with catecholborane yields an inclusion complex where the actinide is encapsulated inside a 15-membered, hexaoxo, trianionic macrocycle built from alternating catechol and catecholborate fragments. In the presence of LiOH, a dimer of two encapsulated actinide macrocycles is formed. The X-ray molecular structure for all the complexes is presented.

Boron–nitrogen macrocycles: a new generation of calix[3]arenes

The simple condensation reaction of 3,5-di-tert-butyl salicylaldehyde and 3-aminophenylboronic acid leads to a trimeric macrocyclic compound. The ability of this molecule to include small organic molecules was in a first approximation analyzed by (1)H NMR spectroscopy and X-ray crystallography.

Self-assembly of dialkyltin(IV) moieties and aromatic dicarboxylates to complexes with a polymeric or a discrete trinuclear macrocyclic structure in the solid state and a mixture of fast interchanging cyclooligomeric structures in solution

It is well-known that the structures of trialkyltin(IV) carboxylates can be either monomeric, polymeric, or cyclooligomeric in the solid state. In contrast, all dialkyltin(IV) dicarboxylates characterized so far in the solid state have monomeric or polymeric structures, however, for some cases it has been proposed that their solution-state structure is cyclooligomeric. In order to generate more information on this subject, dimethyl- and di-n-butyltin(IV) complexes with phthalic and isophthalic acid have been prepared and analyzed both in solution and in the solid state. The solid-state structures of the two dialkyltin(IV) phthalates examined herein contain polymeric molecular chains, however, with supramolecular Sn.O' interactions, which result in the generation of cyclooligomeric units. This provides evidence for the presence of discrete cyclooligomeric structures in solution, which are involved in fast dynamic exchange equilibria as evidenced by (1)H, (13)C, and (119)Sn NMR spectroscopy. In the case of the two dialkyltin(IV) isophthalate complexes studied herein (R = Me, n-Bu), only the di-n-butyltin derivative is soluble and NMR spectroscopy as well as FAB(+) spectrometry indicates the formation of cyclic dinuclear, trinuclear, and/or tetranuclear species in solution, which may be involved also in fast dynamic exchange equilibria. In the solid state, however, discrete cyclotrinuclear units can be identified, in which the 24-membered macrocyclic cavity is almost completely planar, having six oxygen atoms directed into its interior and six Sn-n-butyl groups approximately perpendicular to the molecular plane. The diameter of the cyclic cavity can be described by the transannular O.O distances that vary from 7.68 to 7.84 A, being large enough for the introduction of linear alkyl groups. This can be demonstrated by the supramolecular structure of this compound, which contains a new type of bis[2]pseudorotaxane formed between two molecules through mutual threading via two of the Sn-butyl groups. Such a supramolecular entity has been unknown so far, since the usual composition of bis[2]pseudorotaxanes is the trimolecular combination of a macrocyclic ring system with two threads.