Transition-Metal-Catalyzed S–H and Se–H Bonds Addition to Unsaturated Molecules

Photocatalytic Thiol-Yne Reactions of Alkynyl Sulfides

Thiol-yne reactions typically employ thiols and terminal alkynes as the reaction partners. The thiol-yne reaction of alkynyl sulfides and thiols is possible when employing a nonmetal photocatalyst eosin Y, green LED irradiation, under an air atmosphere. Alkynyl sulfides were transformed in good overall yields (58-90% total yields, 11 examples) favoring the cis isomer. No addition to the α-position of the alkynyl sulfide is observed, and regioselectivity is believed to be controlled through the stabilization of radical intermediates by the adjacent sulfur atom. Furthermore, control experiments with "all-carbon" internal alkynes demonstrate that alkynyl sulfides possess improved reactivity and regioselectivity profiles during thiol-yne processes.

Stereoselective sulfenylation of oxindole-derived propargyl alcohols to access sulfenylated-3-alkenyloxindoles

A Ca-catalyzed, tetrasubstituted alkenyl-sulfenylation was achieved using readily available aryl/alkyl thiols and easily prepared oxindole-derived propargyl alcohols under solvent-free conditions. The reaction proceeded with hydrogen bonding assisted regioselective α-thiolation and subsequent calcium catalyzed stereoselective alkenylation to yield E-alkenyl thioethers with high diastereoselectivity.

Clarification on the Reactivity of Diaryl Diselenides toward Hexacyclohexyldilead under Light

In this study, the reactivity of organochalcogen compounds toward a representative alkyl-lead bond compound under light was investigated in detail. Under light irradiation, the Cy-Pb bond of Cy6Pb2 (Cy = cyclohexyl) undergoes homolytic cleavage to generate a cyclohexyl radical (Cy•). This radical can be successfully captured by diphenyl diselenide, which exhibits excellent carbon-radical-capturing ability. In the case of (PhS)2 and (PhTe)2, the yields of the corresponding cyclohexyl sulfides and tellurides were lower than that of (PhSe)2. This probably occurred due to the low carbon-radical-capturing ability of (PhS)2 and the high photosensitivity of the cyclohexyl-tellurium bond.

2,2-Bis(phenylselanyl)-1-(p-tolyl)vinyl 2-Oxo-2-(p-tolyl)acetate

2,2-Bis(phenylselanyl)-1-(p-tolyl)vinyl 2-oxo-2-(p-tolyl)acetate was synthesized via the reaction of p-tolylacetylene with diphenyl diselenide and benzoyl peroxide in benzene under atmospheric conditions. The molecular structure of the synthesized compound was evaluated using single-crystal X-ray analysis and spectral analyses. The process reported here provides a rare example of the direct and selective transformation of a terminal alkyne to the corresponding geminal diseleno-substituted alkene.

Catalytic base-controlled regiodivergent heteronucleophilic hydrofunctionalization of β,γ-unsaturated amides

A general catalytic base-controlled regiodivergent nucleophilic hydrofunctionalization of both terminal and internal β,γ-unsaturated amides has been reported. The atom-economical addition of various S/P-based nucleophiles was also exclusively chemoselective. More than 60 branched or linear hetero-substituted aliphatic amides were synthesized from common starting materials under transition-metal-free conditions. Preliminary mechanistic studies are consistent with our proposed divergent catalytic cycles.

Solid-State C-S Coupling in Nickel Organochalcogenide Frameworks as a Route to Hierarchical Structure Transfer to Binary Nanomaterials

In this work, the transfer of the flexible and easily tunable hierarchical structure of nickel organochalcogenides to different binary Ni-based nanomaterials via selective coupling of organic units was developed. We suggested the use of substituted aryl groups in organosulfur ligands (SAr) as traceless structure-inducing units to prepare nanostructured materials. At the first step, it was shown that the slight variation of the type of SAr units and synthetic procedures allowed us to obtain nickel thiolates [Ni(SAr)₂]_n with diverse morphologies after a self-assembly process in solution. This feature opened the way for the synthesis of different nanomaterials from a single type of precursor using the phenomenon of direct transfer of morphology. This study revealed that various nickel thiolates undergo selective C-S coupling under high-temperature conditions with the formation of highly demanding nanostructured NiS particles and corresponding diaryl sulfides. The in situ oxidation of the formed nickel sulfide in the case of reaction in an air atmosphere provided another type of valuable nanomaterial, nickel oxide. The high selectivity of the transformation allowed the preservation of the initial organochalcogenide morphologies in the resulting products.

Ln(ii) and Ca(ii) NCsp3N pincer type diarylmethanido complexes – promising catalysts for C–C and C–E (E = Si, P, N, S) bond formation

The first examples of Ln(ii) (Ln = Yb, Sm) and Ca [NC_sp3N] pincer type diarylmethanido complexes were synthesized and successfully used as efficient and selective precatalyst for intermolecular C–C and C–E bond formation.

Exploring the performance of nanostructured reagents with organic-group-defined morphology in cross-coupling reaction

The great impact of the nanoscale organization of reactive species on their performance in chemical transformations creates the possibility of fine-tuning of reaction parameters by modulating the nano-level properties. This methodology is extensively applied for the catalysts development whereas nanostructured reactants represent the practically unexplored area. Here we report the palladium- and copper-catalyzed cross-coupling reaction involving nano-structured nickel thiolate particles as reagents. On the basis of experimental findings we propose the cooperative effect of nano-level and molecular-level properties on their reactivity. The high degree of ordering, small particles size, and electron donating properties of the substituents favor the product formation. Reactant particles evolution in the reaction is visualized directly by dynamic liquid-phase electron microscopy including recording of video movies. Mechanism of the reaction in liquid phase is established using on-line mass spectrometry measurements. Together the findings provide new opportunities for organic chemical transformations design and for mechanistic studies.

Palladium-Catalyzed Cyanothiolation of Internal Alkynes Using Organic Disulfides and tert-Butyl Isocyanide

Despite the availability of selective synthetic approaches to multifunctionalized substituted olefins, the cyanothiolation of internal alkynes has been much less explored. Herein, we show that nonactivated internal alkynes can be successfully cyanothiolated with diaryl disulfides and tert-butyl isocyanide in the presence of a Pd catalyst (e.g., Pd(PPh₃)₄) with the release of isobutene and arenethiol to afford β-thiolated alkenyl cyanides in yields of 34-89%.

Ten-fold boost of catalytic performance in thiol–yne click reaction enabled by a palladium diketonate complex with a hexafluoroacetylacetonate ligand

Palladium complexes with fluorinated acetylacetonate chelating ligands were studied as catalysts for alkyne hydrothiolation.

Visible light mediated metal-free thiol-yne click reaction

The carbon-sulfur bond formation reaction is of paramount importance for functionalized materials design, as well as for biochemical applications. The use of expensive metal-based catalysts and the consequent contamination with trace metal impurities are challenging drawbacks of the existing methodologies. Here, we describe the first environmentally friendly metal-free photoredox pathway to the thiol-yne click reaction. Using Eosin Y as a cheap and readily available catalyst, C-S coupling products were obtained in high yields (up to 91%) and excellent selectivity (up to 60 : 1). A 3D-printed photoreactor was developed to create arrays of parallel reactions with temperature stabilization to improve the performance of the catalytic system.

The air-stable carbocation salt [(MeOC6H4)CPh2][BF4] in Lewis acid catalyzed hydrothiolation of alkenes

Markovnikov hydrothiolation of 1,1-disubstituted and trisubstituted olefins (20 examples) is catalyzed by Lewis acids, including the air-stable trityl-cation salt [(MeOC₆H₄)CPh₂][BF₄] 3.

Selective Thiolative Lactonization of Internal Alkynes Bearing a Hydroxyl Group with Carbon Monoxide and Organic Disulfides Catalyzed by Transition-Metal Complexes

Although many transition-metal catalysts are ineffective for the addition and carbonylative addition of organic disulfides to internal alkynes, dicobalt octacarbonyl and palladium complexes such as Pd(PPh3)4 and Pd(OAc)2 were found to exhibit excellent catalytic activity for the thiolative lactonization of internal alkynes bearing a hydroxyl group. In the presence of the cobalt or palladium catalyst, internal alkynes bearing a hydroxy group, such as homopropargyl alcohol derivatives, successfully undergo thiolative carbonylation with carbon monoxide and an organic disulfide regio- and stereoselectively to afford the corresponding thio group bearing-lactones in good yields. In the Co-catalyzed reaction, the cobalt-alkyne complex from dicobalt octacarbonyl and internal alkyne acts as a key species, making it possible to attain thiolative lactonization of internal alkynes with a hydroxyl group. In the Pd-catalyzed reaction, the coordination of the hydroxy group to the palladium catalyst plays an important role for the thiolative lactonization.

Stereoselective synthesis of alkyl styryl selenides in one-pot: a straightforward approach by in situ dialkyl diselenide formation under transition metal-free conditions

One-pot synthesis of alkyl styryl selenides using KSeCN as selenium source.

A regio- and stereoselective entry to (Z)-β-halo alkenyl sulfides and their applications to access stereodefined trisubstituted alkenes

A mild and efficient preparation of (Z)-β-halo alkenyl sulfides via the K2CO3-promoted hydrothiolation of haloalkynes has been realized, producing (Z)-β-bromo and (Z)-β-chloro vinylic sulfides in high yields with excellent regio- and stereoselectivity. This approach covers a variety of substrates, including both aryl and alkyl haloalkynes. Meaningfully, it allows a facile access to stereodefined (Z)- or (E)-trisubstituted olefins featuring the iterative cross-coupling of carbon-halide and carbon-sulfur bonds of β-halo alkenyl sulfides.

Exclusive selectivity in the one-pot formation of C-C and C-Se bonds involving Ni-catalyzed alkyne hydroselenation: optimization of the synthetic procedure and a mechanistic study

A unique Ni-catalyzed transformation is reported for the one-pot highly selective synthesis of previously unknown monoseleno-substituted 1,3-dienes starting from easily available terminal alkynes and benzeneselenol. The combination of a readily available catalyst precursor, Ni(acac)2, and an appropriately tuned phosphine ligand, PPh2Cy, resulted in the exclusive assembly of the s-gauche diene skeleton via the selective formation of C-C and C-Se bonds. The unusual diene products were stable under regular experimental conditions, and the products maintained the s-gauche geometry both in the solid state and in solution, as confirmed by X-ray analysis and NMR spectroscopy. Thorough mechanistic studies using ESI-MS revealed the key Ni-containing species involved in the reaction.