Finite Element Modeling of Cellular Mechanics Experiments. In: Gefen A, editor. Cellular and Biomolecular Mechanics and Mechanobiology. Berlin: Springer Berlin Heidelberg; 2011. pp. 331-44. [DOI: 10.1007/8415_2010_31]

Penetrating the ultra-tough yeast cell wall with finite element analysis model-aided design of microtools

Microinjecting yeast cells has been challenging for decades with no significant breakthrough due to the ultra-tough cell wall and low stiffness of the traditional injector tip at the micro-scale. Penetrating this protection wall is the key step for artificially bringing foreign substance into the yeast. In this paper, a yeast cell model was built by using finite element analysis (FEA) method to analyze the penetrating process. The key parameters of the yeast cell wall in the model (the Young's modulus, the shear modulus, and the Lame constant) were calibrated according to a general nanoindentation experiment. Then by employing the calibrated model, the injection parameters were optimized to minimize the cell damage (the maximum cell deformation at the critical stress of the cell wall). Key guidelines were suggested for penetrating the cell wall during microinjection.

Finite element analysis reveals an important role for cell morphology in response to mechanical compression

Mechanical loading naturally controls cell phenotype, development, motility and various other biological functions; however, prolonged or substantial loading can cause cell damage and eventual death. Loading-induced mechanobiological and mechanostructural responses of different cell types affect their morphology and the internal architecture and the mechanics of the cellular components. Using single, mesenchymal stem cells, we have developed a cell-specific three-dimensional finite-element model; cell models were developed from phase-contrast microscopy images. This allowed us to evaluate the mechanostructural response of the naturally occurring variety of cell morphologies to increase sustained compressive loading. We focus on the morphology of the cytoplasm and the nucleus, as the main mechanically responsive elements, and evaluate formation of tensional strains and area changes in cells undergoing increasing uniaxial compressions. Here, we study mesenchymal stem cells as a model, due to their important role in tissue engineering and regenerative medicine; the method and findings are, however, applicable to any cell type. We observe variability in the cell responses to compression, which correlate directly with the morphology of the cells. Specifically, in cells with or without elongated protrusions (i.e., lamellipodia) tensional strains were, respectively, distributed mostly in the thin extensions or concentrated around the stiff nucleus. Thus, through cell-specific computational modeling of mechanical loading we have identified an underlying cause for stiffening (by actin recruitment) along the length of lamellipodia as well as a role for cell morphology in inducing cell-to-cell variability in mechanostructural response to loading.

Influence of the pericellular and extracellular matrix structural properties on chondrocyte mechanics

Understanding the mechanical factors that drive the biological responses of chondrocytes is central to our interpretation of the cascade of events that lead to osteoarthritic changes in articular cartilage. Chondrocyte mechanics is complicated by changes in tissue properties that can occur as osteoarthritis (OA) progresses and by the interaction between macro-scale, tissue level, properties, and micro-scale pericellular matrix (PCM) and local extracellular matrix (ECM) properties, both of which cannot be easily studied using in vitro systems. Our objective was to study the influence of macro- and micro-scale OA-associated structural changes on chondrocyte strains. We developed a multi-scale finite element model of articular cartilage subjected to unconfined loading, for the following three conditions: (i) normal articular cartilage, (ii) OA cartilage (where macro and micro-scale changes in collagen content, matrix modulus, and permeability were modeled), and (iii) early-stage OA cartilage (where only micro-scale changes in matrix modulus were modeled). In the macro-scale model, we found that a depth-dependent strain field was induced in both healthy and OA cartilage and that the middle and superficial zones of OA cartilage had increased tensile and compressive strains. At the micro-scale, chondrocyte shear strains were sensitive to PCM and local ECM properties. In the early-OA model, micro-scale spatial softening of PCM and ECM resulted in a substantial increase (30%) of chondrocyte shear strain, even with no structural changes in macro-scale tissue properties. Our study provides evidence that micromechanical changes at the cellular level may affect chondrocyte activities before macro-scale degradations at the tissue level become apparent. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:721-729, 2018.