Pulsed Electric Fields Processing of Foods: An Overview

Equivalent processing for pasteurization of a pineapple juice-coconut milk blend by selected nonthermal technologies

Identifying equivalent processing conditions is critical for the relevant comparison of food quality attributes. This study investigates equivalent processes for at least 5-log reduction of Escherichia coli and Listeria innocua in pineapple juice-coconut milk (PC) blends by high-pressure processing (HPP), pulsed electric fields (PEF), and ultrasound (US) either alone or combined with other preservation factors (pH, nisin, and/or heat). The two blends (pH 4 and 5) and coconut milk (pH 7) as a reference were subjected to HPP at 300-600 MPa, 20°C for 0.5-30 min; PEF at an electric field strength of 10-21 kV/cm, 40°C for 24 µs; and US at 120 µm amplitude, 25 or 45°C for 6 or 10 min. At least a 5-log reduction of E. coli was achieved at pH 4 by HPP at 400 MPa, 20°C for 1 min; PEF at 21 kV/cm, 235 Hz, 40°C for 24 µs; and US at 120 µm, 45°C for 6 min. As L. innocua showed greater resistance, a synergistic lethal effect was provided at pH 4 by HPP with 75 ppm nisin at 600 MPa, 20°C for 5 min; PEF with 50 ppm nisin at 18 kV/cm, 588 Hz, 40°C for 24 µs; and US at 45°C, 120 µm for 10 min. The total soluble solids (11.2-12.4°Bx), acidity (0.47%-0.51% citric acid), pH (3.91-4.16), and viscosity (3.55 × 10^-3 -4.0 × 10^-3  Pa s) were not significantly affected under the identified equivalent conditions. HPP was superior to PEF and US, achieving higher ascorbic acid retention and lower color difference in PC blend compared to the untreated sample.

Effect of Moderate Intensity Pulsed Electric Field on Shelf-life of Chicken Breast Meat

Moderate intensity pulsed electric field (MIPEF) is a fairly new research topic for microbial inactivation on muscle foods. In this study, indirect application of MIPEF (2.5 kV/cm, 4.67 kV/cm, 7 kV/cm) was evaluated in terms of the growth of some pathogenic bacteria and the quality characteristics of chicken breast meat during cold storage (4°C). Broth cultures of E. coli and C. jejuni showed a remarkable resistance to MIPEF under 4.67 kV/cm and 7 kV/cm, respectively. The limit for total mesophilic aerobic bacteria (TMAB) count was exceeded in 4.67 and 7 kV/cm applied groups 2 days later than control (C). In the end, almost 2 log differences were determined for total coliform bacteria in 4.67 and 7 kV/cm applied groups as compared to C (p<0.05). Inoculated P. aeruginosa count remained the same whereas L. monocytogenes growth was promoted by 4.67 kV/cm (p<0.05). pH value, CIE L*, b*, C* color values of chicken breast fillets were not affected by MIPEF application while ΔE values showed the maximum change in the C group. This study demonstrated that improved shelf-life of chicken breast fillets was provided by moderate intensity DC-pulses in combination with cold storage.

Non-Thermal Methods for Ensuring the Microbiological Quality and Safety of Seafood

A literature search and systematic review were conducted to present and discuss the most recent research studies for the past twenty years on the application of non-thermal methods for ensuring the microbiological safety and quality of fish and seafood. This review presents the principles and reveals the potential benefits of high hydrostatic pressure processing (HHP), ultrasounds (US), non-thermal atmospheric plasma (NTAP), pulsed electric fields (PEF), and electrolyzed water (EW) as alternative methods to conventional heat treatments. Some of these methods have already been adopted by the seafood industry, while others show promising results in inactivating microbial contaminants or spoilage bacteria from solid or liquid seafood products without affecting the biochemical or sensory quality. The main applications and mechanisms of action for each emerging technology are being discussed. Each of these technologies has a specific mode of microbial inactivation and a specific range of use. Thus, their knowledge is important to design a practical application plan focusing on producing safer, qualitative seafood products with added value following today’s consumers’ needs.

Are Physicochemical Properties Shaping the Allergenic Potency of Plant Allergens?

This review searched for published evidence that could explain how different physicochemical properties impact on the allergenicity of food proteins and if their effects would follow specific patterns among distinct protein families. Owing to the amount and complexity of the collected information, this literature overview was divided in two articles, the current one dedicated to protein families of plant allergens and a second one focused on animal allergens. Our extensive analysis of the available literature revealed that physicochemical characteristics had consistent effects on protein allergenicity for allergens belonging to the same protein family. For example, protein aggregation contributes to increased allergenicity of 2S albumins, while for legumins and cereal prolamins, the same phenomenon leads to a reduction. Molecular stability, related to structural resistance to heat and proteolysis, was identified as the most common feature promoting plant protein allergenicity, although it fails to explain the potency of some unstable allergens (e.g. pollen-related food allergens). Furthermore, data on physicochemical characteristics translating into clinical effects are limited, mainly because most studies are focused on in vitro IgE binding. Clinical data assessing how these parameters affect the development and clinical manifestation of allergies is minimal, with only few reports evaluating the sensitising capacity of modified proteins (addressing different physicochemical properties) in murine allergy models. In vivo testing of modified pure proteins by SPT or DBPCFC is scarce. At this stage, a systematic approach to link the physicochemical properties with clinical plant allergenicity in real-life scenarios is still missing.

Application of mild pulsed electric fields on starter culture accelerates yogurt fermentation

The goal of this work was to investigate the influence of pulsed electric fields (PEF) operational parameters on a mixture of Streptococcus thermophilus DIL 5218 and Lactobacillus delbrueckii subsp. bulgaricus DSMZ 20081T with regards to the culture’s acidification capability in reconstituted skim milk medium. We investigated the effects of field strength, pulse frequency and total number of pulses by use of design of experiments and a two-level full factorial design. The responses were the cell counts of the two microorganisms after PEF application, the pH lag phase λpH, the maximum pH change rate µmax, the maximum pH change and the oxidation/reduction potential (ORP). The application of PEF on the mixed culture accelerated the acidification of milk by an average of 12 min in an approx. 160 min lasting control λpH. In contrast the maximum pH change rate µmax and the maximum pH change decreased slightly in fermentations with PEF-treated cultures. Furthermore, a significantly faster decrease of the oxidation/reduction potential (ORP) already within the first 30 min and a lower final ORP was observed in milk fermented with PEF-treated culture. The total number of pulses applied was the most influencing factor in most of the responses measured. We hypothesized that the reason for the enhanced performance of the PEF-treated culture was a combination of an oxidative stress response of S. thermophilus DIL 5218 and an enhanced proteolytic phenotype in L. delbrueckii subsp. bulgaricus DSMZ 20081T.

Enhancing Food Processing by Pulsed and High Voltage Electric Fields: Principles and Applications

Improvements in living standards result in a growing demand for food with high quality attributes including freshness, nutrition and safety. However, current industrial processing methods rely on traditional thermal and chemical methods, such as sterilization and solvent extraction, which could induce negative effects on food quality and safety. The electric fields (EFs) involving pulsed electric fields (PEFs) and high voltage electric fields (HVEFs) have been studied and developed for assisting and enhancing various food processes. In this review, the principles and applications of pulsed and high voltage electric fields are described in details for a range of food processes, including microbial inactivation, component extraction, and winemaking, thawing and drying, freezing and enzymatic inactivation. Moreover, the advantages and limitations of electric field related technologies are discussed to foresee future developments in the food industry. This review demonstrates that electric field technology has a great potential to enhance food processing by supplementing or replacing the conventional methods employed in different food manufacturing processes. Successful industrial applications of electric field treatments have been achieved in some areas such as microbial inactivation and extraction. However, investigations of HVEFs are still in an early stage and translating the technology into industrial applications need further research efforts.

Evidence that pulsed electric field treatment enhances the cell wall porosity of yeast cells

The application of rectangular electric pulses, with 0.1-2 ms duration and field intensity of 2.5-4.5 kV/cm, to yeast suspension mediates liberation of cytoplasmic proteins without cell lysis. The aim of this study was to evaluate the effect of pulsed electric field with similar parameters on cell wall porosity of different yeast species. We found that electrically treated cells become more susceptible to lyticase digestion. In dependence on the strain and the electrical conditions, cell lysis was obtained at 2-8 times lower enzyme concentration in comparison with control untreated cells. The increase of the maximal lysis rate was between two and nine times. Furthermore, when applied at low concentration (1 U/ml), the lyticase enhanced the rate of protein liberation from electropermeabilized cells without provoking cell lysis. Significant differences in the cell surface of control and electrically treated cells were revealed by scanning electron microscopy. Data presented in this study allow us to conclude that electric field pulses provoke not only plasma membrane permeabilization, but also changes in the cell wall structure, leading to increased wall porosity.

Effect of the ionic strength of pulsed electric field treatment medium on the physicochemical and structural characteristics of lactoferrin

Pulsed electric field (PEF) treatment (35 kV cm(-1) for 19.2 μs using bipolar 2 μs pulses) was conducted on bovine lactoferrin (LF; 0.4 mg mL(-1)) prepared in simulated milk ultrafiltrate (SMUF), at concentrations between 0.2× and 2× normal strength, with electrical conductivities ranging from 0.17 to 1.04 S m(-1). The physicochemical and structural characteristics (LF content by a spectrophotometric and an ELISA method, surface hydrophobicity, electrophoretic mobility, far-UV circular dichroism spectra, and tryptophan fluorescence) of LF dissolved in SMUF of all strengths tested were not changed after PEF treatment. The PEF treatment of LF in 0.2 strength SMUF did not cause the release of LF-bound ferric ion into the aqueous phase, with a concentration of LF-bound iron being the same as that of the untreated LF control (174 μg L(-1)). However, in treatment media with higher ionic strengths, ferric ion was released from the LF molecule into the aqueous phase. The concentration of LF-bound iron decreased from 174 μg L(-1) for the LF treated in 0.2 strength SMUF to 80 μg L(-1) for that treated in double-strength SMUF. The results suggest that the PEF-induced iron depletion of LF does not appear to cause an appreciable conformational change in LF molecules. PEF treatment could be developed as a novel physical way to produce iron-depleted LF, as an alternative to the existing chemical method.