Strategies for chromium bioremediation of tannery effluent

Unraveling Hypothalamus-Pituitary dysregulation: Hypergonadotropism in F1 progeny due to prenatal exposure to hexavalent chromium

The endocrine disruptor hexavalent chromium [Cr(VI)] is a proven reproductive toxicant. We recently demonstrated that prenatal Cr(VI) exposure causes testicular resistance to gonadotropins, resulting in hypergonadotropic hypoandrogenism in F1 rats. However, the mechanism driving hypergonadotropism in F1 rats exposed to Cr(VI) prenatally remains an enigma. Therefore, we hypothesized that 'Prenatal Cr(VI) exposure may disrupt steroid hormones-mediated negative feedback regulation of the hypothalamic GnRH, and its receptor in the pituitary of F1 rats, leading to hypergonadotropism.' We administered potassium dichromate (50, 100, or 200 mg/L) to pregnant rats through drinking water between days 9 and 14, and their male F1 offspring were euthanized at 60 days of age. Prenatal Cr(VI) exposure in F1 rats resulted in the accumulation of Cr in the hypothalamus and pituitary. Western blot detected decreased hypothalamic GnRH, Kisspeptin1, and its receptor GPR54, along with diminished ERα, AR, aromatase, and 5α reductase, and GnRH regulatory transcription factors Pit-1 and GATA-4 proteins. Immunohistochemical studies revealed increased immunopositivity of GnRH receptor, AR, 5α reductase, ERα, ERβ, and aromatase proteins in the pituitary, whereas decreased Kisspeptin1, GPR54, and inhibin β. Our findings imply that Cr(VI) exposure during the prenatal period disrupts the hypothalamic Kisspeptin-GPR54-Pit-1/GATA4-GnRH network, boosting the pituitary GnRH receptor. We conclude that prenatal exposure to Cr(VI) alters GnRH expression in the hypothalamus and its receptor in the pituitary of F1 progeny through interfering with the negative feedback effect of androgens and estrogens.

A comprehensive review on chromium (Cr) contamination and Cr(VI)-resistant extremophiles in diverse extreme environments

Chromium (Cr) compounds are usually toxins and exist abundantly in two different forms, Cr(VI) and Cr(III), in nature. Their contamination in any environment is a major problem. Many extreme environments including cold climate, warm climate, acidic environment, basic/alkaline environment, hypersaline environment, radiation, drought, high pressure, and anaerobic conditions have accumulated elevated Cr contamination. These harsh physicochemical conditions associated with Cr(VI) contamination damage biological systems in various ways. However, several unique microorganisms belonging to phylogenetically distant taxa (bacteria, fungi, and microalgae) owing to different and very distinct physiological characteristics can withstand extremities of Cr(VI) in different physicochemical environments. These challenging situations offer great potential and extended proficiencies in extremophiles for environmental and biotechnological applications. On these issues, the present review draws attention to Cr(VI) contamination from diverse extreme environmental regions. The study gives a detailed account on the ecology and biogeography of Cr(VI)-resistant microorganisms in inhospitable environments, and their use for detoxifying Cr(VI) and other applications. The study also focuses on physiological, multi-omics, and genetic engineering approaches of Cr(VI)-resistant extremophiles.

Recent Strategies for Bioremediation of Emerging Pollutants: A Review for a Green and Sustainable Environment

Environmental pollution brought on by xenobiotics and other related recalcitrant compounds have recently been identified as a major risk to both human health and the natural environment. Due to their toxicity and non-biodegradability, a wide range of pollutants, such as heavy metals, polychlorinated biphenyls, plastics, and various agrochemicals are present in the environment. Bioremediation is an effective cleaning technique for removing toxic waste from polluted environments that is gaining popularity. Various microorganisms, including aerobes and anaerobes, are used in bioremediation to treat contaminated sites. Microorganisms play a major role in bioremediation, given that it is a process in which hazardous wastes and pollutants are eliminated, degraded, detoxified, and immobilized. Pollutants are degraded and converted to less toxic forms, which is a primary goal of bioremediation. Ex situ or in situ bioremediation can be used, depending on a variety of factors, such as cost, pollutant types, and concentration. As a result, a suitable bioremediation method has been chosen. This review focuses on the most recent developments in bioremediation techniques, how microorganisms break down different pollutants, and what the future holds for bioremediation in order to reduce the amount of pollution in the world.

Health hazards of hexavalent chromium (Cr (VI)) and its microbial reduction

Industrial effluents/wastewater are the main sources of hexavalent chromium (Cr (VI)) pollutants in the environment. Cr (VI) pollution has become one of the world’s most serious environmental concerns due to its long persistence in the environment and highly deadly nature in living organisms. To its widespread use in industries Cr (VI) is highly toxic and one of the most common environmental contaminants. Cr (VI) is frequently non-biodegradable in nature, which means it stays in the environment for a long time, pollutes the soil and water, and poses substantial health risks to humans and wildlife. In living things, the hexavalent form of Cr is carcinogenic, genotoxic, and mutagenic. Physico-chemical techniques currently used for Cr (VI) removal are not environmentally friendly and use a large number of chemicals. Microbes have many natural or acquired mechanisms to combat chromium toxicity, such as biosorption, reduction, subsequent efflux, or bioaccumulation. This review focuses on microbial responses to chromium toxicity and the potential for their use in environmental remediation. Moreover, the research problem and prospects for the future are discussed in order to fill these gaps and overcome the problem associated with bacterial bioremediation’s real-time applicability.

Bioremediation of Chromium by Microorganisms and Its Mechanisms Related to Functional Groups

Heavy metals generated mainly through many anthropogenic processes, and some natural processes have been a great environmental challenge and continued to be the concern of many researchers and environmental scientists. This is mainly due to their highest toxicity even at a minimum concentration as they are nonbiodegradable and can persist in the aquatic and terrestrial environments for long periods. Chromium ions, especially hexavalent ions (Cr(VI)) generated through the different industrial process such as tanneries, metallurgical, petroleum, refractory, oil well drilling, electroplating, mining, textile, pulp and paper industries, are among toxic heavy metal ions, which pose toxic effects to human, plants, microorganisms, and aquatic lives. This review work is aimed at biosorption of hexavalent chromium (Cr(VI)) through microbial biomass, mainly bacteria, fungi, and microalgae, factors influencing the biosorption of chromium by microorganisms and the mechanism involved in the remediation process and the functional groups participated in the uptake of toxic Cr(VI) from contaminated environments by biosorbents. The biosorption process is relatively more advantageous over conventional remediation technique as it is rapid, economical, requires minimal preparatory steps, efficient, needs no toxic chemicals, and allows regeneration of biosorbent at the end of the process. Also, the presence of multiple functional groups in microbial cell surfaces and more active binding sites allow easy uptake and binding of a greater number of toxic heavy metal ions from polluted samples. This could be useful in creating new insights into the development and advancement of future technologies for future research on the bioremediation of toxic heavy metals at the industrial scale.

In vitro microcosm of co-cultured bacteria for the removal of hexavalent Cr and tannic acid: A mechanistic approach to study the impact of operational parameters

Industrial wastes, for instance, tannery wastes are rich soups of resistant and bioremediation-potent bacteria. In the present work, Chromium (Cr) and tannic acid (TA) resistance bacterial strains were isolated from tannery effluent and identified as Bacillus subtilis (MCC 3275) and Bacillus safensis (MCC 3283) based on its 16S Ribosomal RNA homology. Hexavalent Cr is highly toxic and mutagenic due to its high mobility and reactivity. Whereas, TA is known to inhibit enzyme activity, substrate deprivation, and interaction with membranes and matrix-metal ions. The developed In vitro co-cultured microcosm of B. subtilis and B. safensis was able to remove Cr(VI) up to 95% and TA up to 23%. The bacteria cultures separately were able to degrade Cr(VI) to 88% by B. subtilis and 91% by B. safensis and TA up to 27%. Plackett Burman design (PBD) followed by Response surface methodology (RSM) was applied for the optimization of physio-chemical parameters. The optimized conditions for co-culture development were recorded as K₂HPO₄ = 0.2 g/L, MgSO₄ = 0.2 g/L, NH₄Cl = 0.5 g/L, glucose - 0.2 g/L, TA - 5%, Cr = 200 ppm, incubation period of 96 h, agitation speed of 110 rpm, pH = 5.0, temperature= 30 °C and inoculum size = 3%. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) revealed the thorough mechanism of cellular uptake followed by degradation of Cr(VI) and TA. The efficiency of co-culture for other heavy metals was observed as follows: Zn 65%, Pb 63%, Cd 65%, and Ni 65%. Bioremediation using bacteria is an economical and environmentally better alternative to conventional remediation methods. The isolated bacteria are useful in the effluent treatment of tannery or related industries and in metal recovery in mining processes.

Microremediation of tannery wastewater by siderophore producing marine bacteria

The present study evaluated the microremediation potential of nine siderophore producing marine bacteria for hazardous raw tannery wastewater from common effluent treatment plant (CETP). Most of the pollutants detected in the wastewater were diminished after the bioremediation process. Further, among the three potent isolates selected for aerobic and anaerobic bioremediation study, Marinobacter hydrocarbonoclasticus demonstrated the highest bioremediation aerobically with a reduction in chromium (88%), sulphate (71%), phosphate (68%) and nitrate (57%). Notably, Nitratireductor kimnyeongensis could attack the effluent under both aerobic and anaerobic conditions as substantiated by statistically significant (p < .05) reduction in the pollutants [chromium (85%), sulphate (63%), Chemical Oxygen Demand (COD) (69%), phosphate (76%)]. From the study it is evident that the pollutant load reduction was achieved under both aerobic and anaerobic conditions, however, aerobic environment was more effective in reducing chromium, Biochemical Oxygen Demand (BOD), sulphate, nitrate and phosphate. The bioremediation efficiency was further confirmed by the bioassay experiments with plant and animal models where higher seed germination, greater plant length and biomass, as well as improved survival rate of Artemia nauplii for bioremediated wastewater was observed as compared to the untreated effluent indicating a significant reduction in toxicity. The results for simultaneous removal of multiple-toxicants thus signify effectiveness and ease of using the robust properties of these marine bacterial strains suggesting their potential application for bioremediation. Hence this could pave a promising way for an environment-friendly and economically feasible clean-up strategy for safer disposal of tannery wastewater.

Removal of Chromium (VI) by Escherichia coli Cells Expressing Cytoplasmic or Surface-Displayed ChrB: a Comparative Study

Various genetically engineered microorganisms have been developed for the removal of heavy metal contaminants. Metal biosorption by whole-cell biosorbents can be enhanced by overproduction of metal-binding proteins/peptides in the cytoplasm or on the cell surface. However, few studies have compared the biosorption capacity of whole cells expressing intracellular or surface-displayed metal-adsorbing proteins. In this study, several constructs were prepared for expressing intracellular and surface-displayed Ochrobactrum tritici 5bvl1 ChrB in Escherichia coli BL21(DE3) cells. E. coli cells expressing surface-displayed ChrB removed more Cr(VI) from aqueous solutions than cells with cytoplasmic ChrB under the same conditions. However, intracellular ChrB was less susceptible to variation in extracellular conditions (pH and ionic strength), and more effectively removed Cr(VI) from industrial wastewater than the surface-displayed ChrB at low pH (<3). An adsorptiondesorption experiment demonstrated that compared with intracellular accumulation, cell-surface adsorption is reversible, which allows easy desorption of the adsorbed metal ions and regeneration of the bioadsorbent. In addition, an intrinsic ChrB protein fluorescence assay suggested that pH and salinity may influence the Cr(VI) adsorption capacity of ChrB-expressing E. coli cells by modulating the ChrB protein conformation. Although the characteristics of ChrB may not be universal for all metal-binding proteins, our study provides new insights into different engineering strategies for whole-cell biosorbents for removing heavy metals from industrial effluents.

Optimization of chromium and tannic acid bioremediation by Aspergillus niveus using Plackett-Burman design and response surface methodology

A chromium and tannic acid resistance fungal strain was isolated from tannery effluent, and identified as Aspergillus niveus MCC 1318 based on its rDNA gene sequence. The MIC (minimum inhibitory concentration) of the isolate against chromium and tannic acid was found to be 200 ppm and 5% respectively. Optimization of physiochemical parameters for biosorption of chromium and tannic acid degradation was carried out by Plackett-Burman design followed by response surface methodology (RSM). The maximum chromium removal and tannic acid degradation was found to be 92 and 68% respectively by A. niveus. Chromium removal and tannic acid degradation was increased up to 11 and 6% respectively after optimization. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) was used to investigate biosorption phenomena.

Improved Sprouting and Growth of Mung Plants in Chromate Contaminated Soils Treated with Marine Strains of Staphylococcus Species

Marine bacteria possess a wide variety of bioremediation potential which is beneficial environmentally and economically. In this study, bacterial isolates from marine waters were screened for tolerance and growth in high concentrations of chromate (Cr⁶⁺). Two isolates, capable of tolerating Cr⁶⁺ concentrations 300 µg mL^-1 or higher, and found to completely reduce 20 µg mL^-1 Cr⁶⁺ were grown in Cr⁶⁺ (50 and 100 mg kg^-1) spiked garden soil. Notably, both facilitated normal germination and growth of mung (Vigna radiata) seeds, which could hardly germinate in Cr⁶⁺ spiked garden soil without either of these bacteria. In fact, large percent of mung seeds failed to sprout in the Cr⁶⁺ spiked garden soil and could not grow any further. Apparently, chromate detoxification by marine bacterial isolates and the ability of mung plants to deal with the reduced form appear to work complementarily. This study provides an insight into marine bacterial abilities with respect to chromium and potential applications in promoting growth of leguminous plants-similar to mung in particular-in Cr⁶⁺ contaminated soil.

Lead resistant bacteria: lead resistance mechanisms, their applications in lead bioremediation and biomonitoring

Lead (Pb) is non-bioessential, persistent and hazardous heavy metal pollutant of environmental concern. Bioremediation has become a potential alternative to the existing technologies for the removal and/or recovery of toxic lead from waste waters before releasing it into natural water bodies for environmental safety. To our best knowledge, this is a first review presenting different mechanisms employed by lead resistant bacteria to resist high levels of lead and their applications in cost effective and eco-friendly ways of lead bioremediation and biomonitoring. Various lead resistant mechanisms employed by lead resistant bacteria includes efflux mechanism, extracellular sequestration, biosorption, precipitation, alteration in cell morphology, enhanced siderophore production and intracellular lead bioaccumulation.

Pentachlorophenol dechlorination and simultaneous Cr6+ reduction by Pseudomonas putida SKG-1 MTCC (10510): characterization of PCP dechlorination products, bacterial structure, and functional groups

It is the first report in which a novel psychrotrophic Pseudomonas putida SKG-1 strain was evaluated for simultaneous bioremediation of pentachlorophenol and Cr(6+) under various cultural and nutritional conditions. Pentachlorophenol (PCP) dechlorination products, bacterial structure, and functional groups were characterized by gas chromatography and mass spectrometry (GC-MS), scanning electron microscope and energy dispersive X-ray spectroscopy (SEM-EDS), and Fourier-transform infrared (FTIR) techniques. The strain was extremely tolerant to excessively higher individual concentration of PCP (1,400 mg l(-1)) and Cr(6+) (4,300 mg l(-1)). Increasing concentration of PCP and Cr(6+) exerted inhibitory effect on bacterial growth and toxicants' removal. The strain exhibited growth, and concomitantly remediated both the pollutants simultaneously over a broad pH (7.0-9.0) and temperature (28-32 °C) range; maximum growth, PCP dechlorination (87.5%), and Cr(6+) removal (80.0%) occurred at optimum pH 8.0 and 30 °C (from initial PCP 100 mg l(-1) and Cr(6+) 500 mg l(-1)) under shaking (150 rpm) within 72 h incubation. Optimization of agitation (125 rpm) and aeration (0.4 vvm) in bioreactor further enhanced PCP dechlorination by ~10% and Cr(6+) removal by 2%. A direct correlation existed between growth and bioremediation of both the toxicants. Among other heavy metals, mercury exerted maximum and cobalt minimum inhibitory effect on PCP dechlorination and Cr(6+) removal. Chromate reductase activity was mainly associated with the supernatant and cytosolic fraction of bacterial cells. GC-MS analysis revealed the formation of tetrachloro-p-hydroquinone, 2,4,6-trichlorophenol, and 2,6-dichlorophenol as PCP dechlorination products. FTIR spectrometry indicated likely involvement of carbonyl and amide groups in Cr(3+) adsorption, and SEM-EDS showed the presence of chromium on P. putida surface. Thus, our promising isolate can be ecofriendly employed for biotreatment of various industrial wastes contaminated with high PCP and Cr(6+) concentrations.